101 models
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hardworking Dwarfs, gnomes for the garden. Very nice characters. It is suitable for coloring. My children absolutely love it :-). Important: If by chance the…
Print approx. €10.73–€13.12 excl. taxPreliminary estimate for one variant
I designed the 3mf file of the larger version in such a way that an LED tealight can fit in the bottom. Print Settings Material: Prusament - Pearl Mouse / Prusament - Royal Blue / Azure - Silk Sand Nozzle: 0.4mm Support: No, If you want…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Two drunk dwarves, one with a barrel, one without. Print Settings Material: Prusament - Galaxy Black Pla Nozzle: 0.4mm Support: Coat: Yes (Snug)
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Pequeño deflector para el timón del surfski o kayak, para evitar que ramas o algas, se cuelen entre el timón y el surfski, ralentizando la velocidad. Se puede pegar con cinta de doble cara, o bien , con epoxy o algún pegamento compatible…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Scroll stand for Smurf figurines This is a simple stand for six historical smurf figurines that resembles an ancient scroll or parchment. Woodfill PLA I printed this using woodfill PLA from Colorfabb. Print settings I used a 0.60 nozzle…
Print approx. €10.99–€13.43 excl. taxPreliminary estimate for one variant
Surfski hecha a base de las formas con las que se construye con madera, en la vida real, y enlazándolos con unos perfiles longitudinales, que sirven para ir dándole volumen, y creando un conjunto más compacto. El objetivo, es crear una…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
So our newer Frigidair has a deli drawer that keeps popping out of it's connection to the sides when you pull it open (there's a pic of it like this) so I printed this clip to prevent that. I didn't need any tape or glue it just popped on.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Sample organizer based on 0.5 ml Eppendorf vials ( Eppendorf™ DNA LoBind™ Tubes - https://www.fishersci.fi/shop/products/polypropylene-dna-lobind-polypropylene-microcentrifuge-tube/10686313 ). Ideal for 5x5x0.5 or 6x6x0.5 mm samples.…
Print approx. €8.15–€9.96 excl. taxPreliminary estimate for one variant
Optimierter Beuteleinwurfstutzen für den Parkside Nass-/Trockensauger PWD 25 C4. Dieser steht 45° gedreht nun nach unten direkt in den Beutel. Dies verhindert ein Einreißen des Bautels bei der Bestückung. Optimised bag insertion spout for…
Print approx. €2.61–€3.19 excl. taxPreliminary estimate for PETGSource material: PET
Chicken Joe : Surfs Up
Print approx. €5.44–€6.64 excl. taxPreliminary estimate for one variant
Das Frisbee ist sehr leicht und hat tolle Flugeigenschaften. Ich habe es so konstruiert, dass es auch von kleineren Kindern leicht geworfen werden kann. Beim Wurf muss die die Seite mit dem Rand (der Erhöhung) nach unten schaue. Somit…
If you like the model, you can support me by nominating my profile or this model. Thank you! Thank you for downloads, likes… Enjoy !
Smurfs house, for difficulties printing of the roof, I made 3 versions - original; in split for half (need to be glued); separated by internal fit ring with the house. New update with modular roof, windowsill's (can be printed in…
Thank you for downloads, likes… Enjoy !
Thank you for downloads, likes… Enjoy !
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
My take on the ever popular tool to easily and accurately create rabbet and dados with a table saw, graduations added to each side for the estimated kerf and stock width, should just be used as a guide, this is 3d printing after all.…
Thank you for downloads, likes… Enjoy !
French knitting tool for making scarfs. Use a small screwdriver to pry off the snug supports.
Thank you for downloads, likes… Enjoy !
Thank you for downloads, likes… Enjoy !
Thank you for downloads, likes… Enjoy !
This is a collection of different shockpads for skateboards / longboards / surfskates and other boards. There are: Normal risers from 1 - 20mm Riser with wide support from 20; 25 ; 30mm Risers with angles in all possible variations They…
🎅 Christmas Smurfs 💙 – 3D Printed Christmas Keychains and Decorations 💙 Get ready for Christmas with this mini army of blue Smurfs! 💙 💙 With a cute Santa hat 💙 perfect as: 🎄 Christmas tree decorations 🔑 Keychains 🎁 Small festive gifts or…
A simple barricade for your battlefield, with powerful battlerunes ;). Print 3 files separately, then glue them together. The main barrier you can print normally, no supports. The decorative runic panels should be print horizontally, flat…
Please let me know if you encounter any problems with the measurements. I'm trying to make it as precise as possible so that it's not too loose or too tight.
EN: This is a simple six-pointed shuriken ninja throwing star. Print with three perimeters and higher filling, otherwise it is not stable enough and does not fly well. We have had good experiences with TPU in tough combat use ;-) — I…
A grumpy yet lovable keycap inspired by Grouchy Smurf from The Smurfs. With his trademark frown and classic blue look, this design perfectly captures his moody charm. Great for fans of vintage cartoons and collectors who enjoy expressive,…
A sweet and iconic keycap inspired by Smurfette from The Smurfs. With her signature blonde hair and kind smile, this design captures the charm and beauty of the most beloved Smurf. Perfect for fans of classic cartoons and collectors who…
Thank you for downloads, likes… Enjoy !
Modeled after the sign for the Disney World Seven Dwarfs Mine Train roller coaster ride at Magic Kingdom. Just did it for my brother, whose favorite ride this is. Sort of like a little badge - could probably find a little stand to display…
Inserto para poner en el vénturi de la marca DeBRITO, ya que con el uso, se rompen las pestañas que sujetan el balancín, y deja de hacer su función. Este sustituye el balancín, y se queda fijo, como un vénturi de la serie Carbonology. Por…
The box has dimensions 230x164x33,5 mm. You can print a 35 dwarf organizer (I used this one https://www.thingiverse.com/thing:4549842) for the Caverna board game. The lid has the name of the game "Caverna" and should be printed along with…
sculped with with as reference the now defunct NFT project Incognito. Printing this lifesize will make for a beautiful mannequin to display your favorite headgear like: glasses, scarfs and hats. Looks beautiful when printed in white, but…
This is simple sand spike with a GoPro mount on top. Great for low-angle beach videos. Print with logo side down and with 6-10 shells with 25% Gyroid infill for stronger, more sturdy body that can withstand stabbing into wet or dry sand.…
Last months ago I have made this mold form and it appeared to be not as good as I have wondered, it had problems like sizes and etc; and was too un-ecofriendly. So, due to my previous mold was not fitting in ordinary printer and to print…
Designed in Fusion 360 using DXF files from Adobe Photoshop. Line width is optimized for 0.4mm nozzle.
simply DWARFEN the guys are KI textured as old fashion style Colors.
Fixed (static) models of snowmen. Two parts and two types of snowmen. For the snowmen with arms print supports under the arms. You can MMU print them, but I had painted them. Hat is glued to the snowmen head.
A Simple holder for your pegboard in the kitchen. Constructed for the “spice giants/dwarfs” by tupperware.
Print: Layer Hight 0.2mm Infil 15% Scalable Print in multicolour depending on your printer and slicer. Happy Printing
I split the scarfs in half and added magnets. I alternate the magnet orientation per side so the scarfs only go on one way. I used these, but any 6x2mm magnet is fine.…
Deutsch: Hier ist ein Satz von Kupplungen für das Quadro-Baukastensystem um ein reales Modell in Maßstab 1:10 zu erstellen. Auch wenn ich mit der (recht eigenwilligen) Software gut umgehen kann, dachte ich mir, dass ein echtes Modell zum…
Two cute otters arm in arm ice skating on a winters day. One with a little hat, and a foot turned up. Many small considerations to minimize supports but both tails need to be supported at their lowest points. I used paint-on in…
Militärisches Symbol zur Verwendung in Ausbildung/ Befehlsausgabe
Hello Tribe, A member of our dnd group requested a flying shield that was also usable on their mini. please enjoy Here is our Sunlu Affiliate link https://www.sunlu.com/?sca\_ref=507104.Qc1O4Eu3lJ Visit us on…
Militärisches Symbol zur Verwendung in Ausbildung/ Befehlsausgabe
KettenAbwurfSchutz für Velomobil mit 1× Kettenblatt Ist ein Kettenschutzring vorhanden: KettenAbwurfSchutz einfach Ist kein Kettenschutzring am Kettenblatt: KettenAbwurfSchutz mit Lasche Kein Kettenschutzring und sehr steiler…
Bring your favorite designs to life with this high-quality, layered keychain! Designed with 3D printing in mind, this model features distinct height levels for each color, making it incredibly easy to achieve a vibrant, multi-colored look…
Warhammer dwarves: IRONWARDEN WITH GRUDGEHAMMER TORPEDO, IRONDRAKE, IRONBEARD WITH MUSKETE, IRONBREAKER
This is a remix of my own nerf dart head and beefy smoosher http://www.thingiverse.com/thing:128277 by HobgoblinSteve. It can be mounted on a nerf dart to turn a nerf gun into a fly splatting gun. Category: Household Supplies
This model of a surfski is intended to be used to illustrate paddling technique. The surfski is scaled 1:10 and as such can be used with the Carbon 13 figure at 130%. When assembled, the surfski is 54 cm long! It is split up into 4…
This is a remix of my own nerf dart head and beefy smoosher http://www.thingiverse.com/thing:128277 by HobgoblinSteve. It can be mounted on a nerf dart to turn a nerf gun into a fly splatting gun. Category: Household Supplies
Heavy-Duty Skateboard & Surfskate Stand I wanted to design a heavy-duty skateboard and surfskate stand for the office, one that would keep my boards secure when I ride them to work. I based the design on a wooden version I saw online. The…
If you paddle surfski, you know what to do with this. Silicone or SikaFlex can be used. Scale it as you wish ;-)
Take to the beautiful beaches of Hawaii at home!
It's just a reverse engineering, I create this by picture in Fusion cause there is no way to arrange delivery. Please, dont use this for commercial. If you have the opportunity to purchase the original - do it, their work is worth it. You…
Durch einen Unfall mit dem Rasenmäher haben wir den Deckel von unserem Batteriebetriebenen Maulwurfschreck verloren. Hier ist ein Ersatzdeckel. Due to an accident with the lawnmower, we lost the lid of our battery-operated mole repeller.…
Prints in standard Draft 15min on 1.5meter Filament Have fun
Hi, My other better half decided to clean wardrobe and complained about mess with her belts and scarfs, so I decided to help her a little bit and designed simple hangers Easy, fast print - no support needed
Since trying to learn how to ride a surfskate was quite diffcult at first, sometimes when falling of the boards i accelerated it into walls or other objects. This attachable bumper will prevent major damage to the board. Printed in TPU or…
It's a mechanical counter. It counts things. Looks like a thing with a thing.
The source marked this model as adult content.
The file contains replacement knobs, and a replacement pin. The replacement pin is for the shorter screw. Use one M2 screw and nut for the short screw, and one M3 screw and nut for the long one. It is normal that the M3 head seats over…
A new keychain for Smurfs fans The Smurfs logo keychain Check out my other models nowy brelok dla fanów Smerfów The Smurfs logo keychain zapraszam do sprawdzenia innych moich modeli
This is a wall bracket for a Hamboard logger. Therefore relatively solid and stable. Recommended material: ABS or ASA-X I have used ASA-X. Printed on the side with support for the drill holes. Could also be printed without support…
Hi, you want to fix your YOW V4 surfskate system with the locking screw to cruise around but then notice that you have lost the screw? With this bracket that will never happen again. Simply print it and insert it into the fixing hole -…
Description Mailbox lock is a mailbox lock for temporarily unused mailboxes to prevent the insertion of trash... Print instructions Printed Parts 1x Print in on side in PETG and as Single Object in Prusa Slicer (Multicolor!) Additional…
Here is a mash up of the Dwarfstruder and Raised J-head mount for use on the Ord Bot Hadron. It has been modified for using an E3D V6 hotend, so the slot for the head is thinner than the standard J-head. Designed for 3mm filament. Fins…
I created these tools for mounting my DJI Action 5 Pro camera on a kayak. There are connectors of different sizes, and a special one that takes into account that the lens of the camera is not in a centered position. I took care to make it…
High-angle ~10.5° wedge riser for surfskate and deep carving. Front 14mm / Rear 4mm geometry dramatically increases lean-to-turn ratio on your front truck, giving you surf-like pumping motion without a special surfskate adapter. Works…
A new keychain for Smurf fans The Smurfs logo keychain Check out my other models nowy brelok dla fanów Smerfów Brelok Smerfy zapraszam do sprawdzenia innych moich modeli
Make your Bandit MK2 into a Rifle
Fixed (static) models of snowmen. Two parts and two types of snowmen. For the snowmen with arms print supports under the arms. You can MMU print them, but I had painted them. Hat is glued to the snowmen head.
I created these tools for mounting my DJI Action 5 Pro camera on a kayak. There are connectors of different sizes, and a special one that takes into account that the lens of the camera is not in a centered position. I took care to make it…
The file contains replacement knobs, and a replacement pin. The replacement pin is for the shorter screw. Use one M2 screw and nut for the short screw, and one M3 screw and nut for the long one. It is normal that the M3 head seats over…
Hi, My other better half decided to clean wardrobe and complained about mess with her belts and scarfs, so I decided to help her a little bit and designed simple hangers Easy, fast print - no support needed
Heavy-Duty Skateboard & Surfskate Stand I wanted to design a heavy-duty skateboard and surfskate stand for the office, one that would keep my boards secure when I ride them to work. I based the design on a wooden version I saw online. The…
This model of a surfski is intended to be used to illustrate paddling technique. The surfski is scaled 1:10 and as such can be used with the Carbon 13 figure at 130%. When assembled, the surfski is 54 cm long! It is split up into 4…
The Smurfs - Papa, Smurfette, Brainy and Hefty - 1981 3D printable model.
Militärisches Symbol zur Verwendung in Ausbildung/ Befehlsausgabe
Diorama v1 | Snow White and the Seven Dwarfs
![KettenAbwurfSchutz für Velomobil mit 1× Kettenblatt [FreeCAD]](https://media.printables.com/media/prints/5afc384f-8f8e-4d57-a02d-36c1a65c9eb2/images/9286424_8f3881b3-6e61-4c44-a08a-17a4846712bf_8252b084-bf55-4733-87db-c1ecdd21e3ab/image-20250322-172149-502.jpeg)
