995 models
During medical emergencies you have to deal with multiple drugs in syringes. Those may fall out of your pocket if not properly secured. I made two models: one with a clip for your chestpocket and one with a hole for a keyring. Choose…
Lucky charm gift for New Year's Eve with a function! The coin included in the horseshoe clip for the keychain can be used as a token for any shopping cart. On the coin is on one side a shamrock on the other side the number 26 for 2026…
Das Argonath, auch bekannt als die "Zwillingsstatuen", ist ein beeindruckendes Monument aus J.R.R. Tolkiens „Der Herr der Ringe“. Dieses detaillierte 3D-Modell der majestätischen Statuen von Isildur und Anárion ist nicht nur ein…
Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
Fate bringer hand cannon is a rare weapon which drops from vault of glass raid. this model prints on one bed and has holes for a 4.8mm metal rod to help with alignment and gluing. Print instructions Print all the parts as the import…
Overlay for the Behringer X-Touch universal control surface when used with the XR32 or XR32 rack mixer. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR32 mixer and…
Syringe for putty and thick materials with a removable nozzle ,I recommend printing from Petg, it will withstand a higher load
This is a Medical Syringe from the game Rust. A label for it is also uploaded, might need some tweaking irl. UPDATE Made an adjustment to the thickness of the needle cap walls for better printing. Non commercial prop. Category: Props
Updated my Darth Fader to fit on the Behringer X32 console, Requires Supports just under the fader overhangs.
General purpose hobby craft syringe to apply glue, grease, cake-icing, paint and other liquids into difficult to reach places. The syringe has a fine extrusion however this can be opened up by shortening the nozzle with scissors. Regular…
Ein Satz von Putzausgleichsringen mit 60 mm Durchmesser von 6 mm bis 25 mm in 1mm Schritten. Als Schrauben die originalen Kaiserschrauben verwenden Man kann die im Internet bestellen, wenn nötig. Die Putzausgleichsringe können auch als…
A rack large enough to fit 3 Behringer-style desktop synth modules. I designed this at the request of a friend who was rapidly running out of desk space, based on some existing designs found online. This will fit any 3 modules of equal…
This is just a tiny and simple stringer to put anywhere on your blaster to fire at roughly 60 fps, so nothing to write home about but probably highly useful for close quarters games against shields or special targets that require mega…
A Travel Case to hold Vials and Insulin Syringes. Holds five vials up to 16.5mm in diameter and 32mm in height Fits commonly used 3MM Vials Holds syringes up to 120mm in length Fits commonly used 100-unit insulin syringes Room for Alcohol…
“Accept the pain, but don't accept that you deserved it.” - Dalinar Kholin , from Oathbringer by Brandon Sanderson A neat little, to-scale (roughly, at least, Alethi heights are weird to have to work with) Oathbringer, to include the…
These use the lock portion from #3712257, allowing the tip length, diameter, and style to be customized. Included is a collection of simple round and flat tips, as well as a couple examples of angled and offset flat tips. STL files are…
Case to hold seven vials and associated single use syringes. This is print in place. Each vial is approximately 20mm dia. x 39mm high. Syringes are BD 1ml TB. Printing No Supports Change History 2024-02-15: Provide space for 39mm tall…
Visit the original page for more detailed instructions. I used any screws and bolt I could find to assemble it. Be prepared for a lot of sanding. I used plastic boxes/trays to emulate the spring as the original poster suggested. I don't…
You can print each of these three components separately and then glue them together for use.
This stand can hold two synthesizer. You have to take apart the model in slicer to fit onto bed. You can use heat inserts and 3mm screws or simple glue them together. The two side can held together also if you heatinsert 4 screwnuts on…
plunger rack for syringes for controlled dosages. A second ring above can be used to lock the plunger in place.
0.3mm layer height. 100% infill no supports Esun PLA+
MechWarrior Online Hellbringer, roughly 130mm tall. Fully articulated, and tested, all parts are error free and printer friendly. Multiple Torso and weapon options, and like the Atlas, does not require any glue for assembly. I used a…
Summary: This syringe screw feeder helps extruding fluids from a syringe ... ... in a controlled way ... with substantial pressure ... with accurate dosage Extruding e.g. 0.1ml from a 2ml syringe is no problem anymore, even if more…
Update --------- LANKA Overhaul Mods for Leedle's cool Lanka stringer blaster. Thanks for making these files free and remixable. Changes made (shown in the pictures in green color): modified the mag retention to use angled Talon mags…
Also in the READ ME.txt file: This version of the Cricket has a slightly larger grip, modified lever with better handles, and a redesigned receiver that allows for low power or high power shots, depending on the elastic draw length. It…
designed this case to fit on the shelf in my safe. print the latch at 100% infill. you will need: 2 - m3 x 18 button head machine screws (for the hinge) 2 - m3 x 23 or 25 button head machine screws (for the latch and the latch catch)…
This is a replacement fader knob for a Behringer X32. The originals come off very easily and replacements seem expensive for a piece of plastic. These print well on their side with slow bridging. I printed them at highest detail in silver…
A needle cap to protect your (mostly workplace) needles, store them a bit more safe and without smudging you other stuff with its liquids :) I mainly want to use this on all of my solder flux and solder paste needles. But recently also…
Fully printable, springed and auto closing, miniature holder. It can hold wide variety of bases - spanning from 20mm to 40mm (and more with a proper arms variant!) This is part of larger collection of compatible (though less mechanical)…
WARNING DO NOT USE A 996 SERVO WITH A EBB36/42 YOU WILL KILL YOUR BOARD the 996 servo can draw a peak of 1.5 amps which is enough to fry the 1 amp 5v rail that is found on the big tree tech ebb boards. I just found this out the expensive…
Syringe earrings that come in 4 versions
"Of unimproved metal, hot and full" Fortinbras is a fully 3d printed single shot flare blaster that uses absolutely zero hardware other than 1/8th inch elastic (other sizes should work). It fires using stringer shells that I also…
Since I only have very little space in my music area, I developed a compact stand for the two Behringer synths. I have sized everything so that in order to protect the synths from scratches, you can easily apply 1mm anti-slip pads in the…
A ratcheting syringe dispenser for ~15mm OD syringes. The ratchet has a tongue that flexes to move on to the next tooth on the plunger. Its function relies on friction applied to the plunger which is usually from the rubber tip of the…
Quick design to cap a Luer-lock syringe with needle still on. Works best if you resize it to fit your particular needle, as there are a few different sizes, so I've attached the solidworks file also. So far it's the best easy and cheap…
2026 Gimbal Lucky Charm / Glücksbringer with different ring clearances from 0,20 mm to 0,35 mm. Beside the different clearances, the Gimbal Lucky Charm is also available in different versions: 2026, for single tool 2026, for multi…
Printed in 2 parts (left and right side). I used PETG, use whatever filament you want. Parts are oriented for printing, I printed it with 0.3mm nozzle (because I'm insane), you can use whatever you want, preferably 0.4 or 0.6mm. Use a…
This is a relatively easy print; however, I will say these models are not to scale, so if you are looking for a 1:1, make sure to set the scale to 75%. Besides that, I highly recommend orienting the models to have the most surface area…
Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…
The blue-ringed octopus model pushes the edge of multicolor printing and it's a great example of the INDX capabilities. Once printed, it can hold all the tools that came with the printer and a benchy in its tentacles. The model is…
Pokud se vám model líbí, budu rád za váš like. If you like the model, I would be happy for your like.
This is the Springer Perilous. It is a long draw side-mag pump action threaded rod springer. It has linear rail in the prime. It has a quick swap spring cap, and uses 11" springs. It uses Talon mags. It is capable of achieving well over…
Description Syringe plunger that can be automated using a microcontroller and a servo. The plunger is designed to fit a 100 ml syringe. Travel distance of the plunger could be increased in another version. Printing Can be printed with…
I wanted to finally put my mixer into a light case rack. The original mount would be suitable for just that, but I plan on adding some wireless devices and found out that there was not enough clearance for xls plugs to be permanently…
Most "tube squeezer" designs are based on forcing the tube through a fixed slot. This is either achieved by manually cramming the tube through a slotted novelty-shaped plastic toy or by using a flimsy rotating key in a feeble attempt to…
Yet another version of a syringe holder. This one incorporates 14x M10 nuts as weights, to give the thing a lower CG. … and feels much more expensive :-) pause print @17mm to insert the nuts or if not, don' stop :-) Cheers
This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…
Fits on MINI beds. Internal support design for a safe and strong place to dispose of your used needles. One-way door. Clear, raised labeling helps prevent accidents. Don't push too hard or you will bend the door. Just slip the capped…
Mit diesem Schlüssel lassen sich EATON-Befestigungsringe problemlos anziehen und lösen. Ich habe es mit ABS gedruckt mit 0.2mm Schichthöhe und 30% Füllung. Stabilität ist ausreichend um Schalt- und Tastelemente vernünftig zu befestigen…
I looked around and could not find a solution that met my needs so I hacked this together. I tried to use a couple other designs and even tried modifying them. In the end I just made a solution. This was printed on a x1c in draft mode .24…
Die ist eine Weiterentwicklung von Christian Tablethalter. Einfach zwei, oder besser drei, der Halterungen ausdrucken und mit den Original-Schrauben des Mischpults befestigen. Die Halter sollten auf der Seite liegend gedruckt werden. Ggf.…
Regreasing the linear rails on my printers is a frequent task, and with the many rails that don't have working grease-holes, it's a bit awkward to get grease into the raceways without taking the cart off. I have established a routine to…
Use with standart 75 syringe with cleaning fluid to fix clogged head. Tested with bathrom cleaner to fix my frint head and all works on first try... Video how to prepare for cleaning Should work whit these models (tested with EPSON XP960)…
This is a remix to accommodate the larger size bottle (4 fl oz, 118 ml). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Eryone PETG White Category: Household
Modellbahn Spur N – Ladegut – Fass mit 4 Ringen – 16 Stück Da sich das Zubehör für die Modellbahn mittlerweile keiner mehr leisten kann oder will, habe ich das Ladegut für die Modellbahn Größe N entworfen, die Fässer sind mit FreeCAD…
At the time of the Behringer X32 release, the iPhone 3 was the main iPhone and the 4 was just about to be released. The phone holder on the X32 was designed to fit these older phones, but now 13 years later, the holder is no longer able…
This syringe holder provides a secure and compact solution for transporting pre-filled insulin or other 1 ml disposable syringes, preventing accidental plunger movement or damage. The updated design now supports multiple syringe types ,…
Never lose a drop of e6000 again! This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily. To use: Screw the luer lock end on a syringe Jam the nozzle of e6000 in the other end Squeeze the e6000 tube…
---------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------- This toy is designed to get a rocking feeling…
A table stand for my mixer. this way I can see all the controls at a glance and from a distance. you can loop the cables under the beam to keep it a bit tidy. Use some force to clamp the parts together. It's a tight fit.
I recommend printing on 100% fill for strength.
sehr schnell druckbarer Glücksbringer für Silvester in verschiedenen Varianten keine MMU nötig, einfach Materialwechsel bei 2mm einfügen Very fast printable talisman / lucky charms for New Year's Eve No MMU needed, simply a material…
Lubricant applicator for LM8UU / LM10UU linear bearings. Luer Lock syringe interface https://eshop.cbmedical.cz/diconex-jednorazova-strikacka-3-dilna--10-ml-luer-lock--sterilni/ Can be printed without supports.
The open-source syringe pump is a standard research instrument for use in microfluidics and several other laboratory workflows. There are numerous designs available in the realm of open-source syringe pumps. We have combined some of the…
Brackets I used to mount a UMC22 underneath my desk. Should also fit a UM2, but I don't have one to test with. Takes just over 1.5hrs to print each bracket on my Cetus. Mounting holes are sized for #6 flat countersunk screws. You can also…
maximum syringe diameter supported 18,5mm PLA
For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…
A Springerle mold creates uniform biscuits that are more 3 dimensional and can have more intricate designs. This Flower shaped mold can be used with Sugar, Shortbread or Gingerbread dough. The mold is first lightly oiled and then…
I developed an holder for 1ml syringe. We used it for COVID19 vaccinating. Its a versy simple model You can use it with silicon sticky feet → Diameter 5mm. Print instructions Print with 0.4 mm nozzle. Layer height 0.2 mm gives great…
The faceplate has pockets for 6x2mm magnets to hold the faceplate on the mixer. You can press them in or add some glue. You can print the model as it is and use a pen to label the inputs. I added extruded text for the labels and printed…
Anime Cosplay Derringer for Kaguya-sama Love is War. Artistic interpretation for ease of 3d printing. No secondary finishing required. Feels good in hand :) Yes, I know it doesn't have any sights--but, come on, a derringer is a…
sehr schnell druckbarer Glücksbringer für Silveste kann mit und Ohne MMU gedruckt werden, ohne MMU einen Materialwechsel bei 3mm einfügen Very fast printable talisman / lucky charms for New Year's Eve Can be printed with and without MMU;…
The led illuminated sliders of the Behringer 2600 (ARP 2600 clone) don't look that good, are a bit too small and the LED light is not shaped well to indicate the position. SliderCaps2600-slider_Caps_akf_BM is the final design but you may…
Give the gift of happiness for the new year! Simply combine a 1 euro cent coin with this 3D print and put a smile on someone's face! I wish you a happy new year and good health in the coming year! (I printed with a 0.4 mm nozzle and 0.2…
60ml Syringe Grip: Better Handling for Easy Gavage Feeding or thick liquid (resine like) My 60ml Syringe Grip makes it easier to use the plunger, which can sometimes be challenging during gavage feeding. It provides a better grip for…
Ringed Star, wearable as Amulet and/or Earring.
Mount for the Behringer UMC202HD USB audio interface (maybe works for other models, too). The front plates are hold in place by M4 melting inset nuts. Printed in Devil Design PETG on a Prusa Mini clone.
Angled stand (22.6 degree elevated) for a Behringer X TOUCH ONE control surface.
Friend of mine liked the design from Thingiverse but wanted a place for the wires to sit. The gap for the wire holder is the same on both sides only because I didn't feel like having a “correct” way to mount it. I included the f3d file if…
Remixed sushimoto's gear which had a perfect teeth fit but my buddys Benz had a different shaft size (6mm) Print Settings Supports: Yes Resolution: 0.2 Infill: 100 Filament: PETG
This package contains an applicator tip and plunger for the cheap Chinese made Amtech 10cc syringes, which are sold in bulk and come with neither. I'd been hot gluing plunger base from an old Global 10ml syringe with the rubber end…
This is a mount for a Behringer U-Phoria UM2 audio interface. didn't like how it took up desk space and also how it would get dusty after a while so designed a mount so that it can sit under the desk. uses 4 tiny screws (guitar screws…
.16lh on centauri carbon using PalA. Printed in 5min with 2 walls and 15% rectilinear infill. No support needed. Total material used, .93g
This paint tube wringer/twister was modeled in FreeCAD using a parametric approach. Users can manipulate the model to suit their individual needs through the manipulation of the “parameters” spreadsheet within the FreeCAD model. The STL…
Adapter to make it easier to squeeze thick adhesives through a "Monoject 412 Syringe" 18mm diameter. Printed with 4 vertical walls and 30% infill.
I recommend printing perpendicular to the printing plate, it will preserve more details and the layers are not so visible, at a low layer the time is longer, but the details are more beautiful. So far, the print with Pla Prusament silver…
I'm a happy Omnipod user, but one of the things I miss from Medtronic's system are the little couplers that come with each reservoir, making it very convenient to transfer insulin from vial to the reservoir. With Omnipod's system, there's…
Ich habe aus mir unerfindlichen Gründen einen Faderknopf verloren. Dieser stammt von Behringers X-Touch DAW-Controller. Ich habe ihn knallrot ausgedruckt und ihn mit dem Main-Kanal kombiniert. Passt! :-)
Update: Added Fusion360 files A holder for a flux syringe based on the gridfinity system created by Zack Freedman. Designed to fit the syringe that can be found here.…
Einfach mindestens 2 der Halter drucken und mit den originalen Schrauben des X32 festschrauben. Ich habe auch die Fusion 360 Datei hochgeladen, so kann jeder Anpassungen z.B. für andere Dicken an Tablet vornehmen.
sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve
Behringer X-Touch rack mount ear bracket left and right. as these ear brackets are impossible to find online, i made my own ones. Print settings: -Print 0.20 Quality -infill: 40% -Material:PLA -No support Print the bracket with the…
Models of the convocation's constellation crystals, separated out so you can print each crystal in appropriate color, print the constellations in white (or color of your choice, maybe glow in the dark) then slot the constellation into…
