Counting matching models…
Try out BumpMesh.com ! BumpMesh is a free, open-source, browser-based tool for applying custom displacement textures to your 3D models - no account, no software install, and no expensive licenses required. Simply load your STL, OBJ, or…
A large, solid stand for the STORZ & BICKEL Mighty+ vaporizer. Flared towards the bottom for stability. Around 54g when printed with 100% and around 35 with 20% infill . You may have to scale it to 100.5% - 101% in your slicer for an…
This is an ashtray I made to use with my Arizer Extreme Q vaporizer. The holes can fit a ton of different tools, but I use mine to hold things like a 510 battery, some extra pokers and a brush, and a lighter. Also included is a rolling…
A 2-in-1 device. Allows you to fill the chamber of your vaporizer with the funnel, and/or press a strong and dense pellet. Normally, due to the low density, a small amount of 0,10 g would totally overfill the chamber, leading to muted…
Has holiday stress got you tearing your hair out? Watch this mesmerizing sculpture for 3 minutes and your angst will melt away! This mini-sized reinterpretation of Noci's KiMe kinetic sculpture , at 6.9"/175mm in diameter, is easy to…
This is a smaller and cheaper replacement for the original filling system, see https://storz-bickel.com/en-us/filling-set-for-40-dosing-capsules I recomment to iron the upside of the hole-plate. 2023-08-25 Update: Fixed “Druckplatte.stl”…
This pressurizer is designed to keep your padel balls under pressure after play. By preventing air from escaping the balls, they remain bouncier and better suited for consistent performance. This helps extend the lifetime of your balls…
Turns a pickle jar into a filtering water diffuser for hookah or vaporizers. It attempts to split air bubbles up as much as possible to accomplish better diffusion than many other options I have seen. A gasket printed in TPU will likely…
A simple stand for the STORZ & BICKEL Mighty+ vaporizer. Slightly flared towards the bottom for increased stability. Includes a rather large cut-out for the USB-C port to accommodate even the thickest plugs. Available in single-direction…
The Recreator 3D - Colorizer! Easily add color to your converted plastic bottle 3D Filament created with the Recreator 3D. Order 2 Sets of the following 16 Pieces Mini Permanent Markers for Nurses Badge, 8 Assorted Colors Mini Markers…
Zum befüllen der Dosierkapsel wird der Trichter drüber gestülpt. Keine Stützstruktur nötig. Bei Bedarf den Trichter innen mit feinem Schleifpapier schleifen. The funnel is placed over the dosing capsule to fill it. No support structure…
This piece is designed to fit on top of the extruder assembly to colorize clear filament. It works best if you remove the front cover of the assembly before adding the colorizer. To install: - First remove any filament that has been…
Update: Added a version with a threaded lid. This is an item that I designed and printed out of necessity, when one of those refrigerator experiments went terribly wrong. After hours of cleaning the leaky mess the remaining aroma was…
Have Fun EDIT: Added a v2 with tighter tolerances. Category: Organization
Have fun! UPDATE: Added version 3. Would recommend to print this version. Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts
I started this as a half joke but it works, so hear me out. It is my answer to a question nobody asked, that is what's the most stupidly overthinked (I dare not say overengineered because engineering is something else) piece I could…
Tool to safely remove air from tires for long term storage while holding cap. Inside is threaded to standard Schrader thread. Will easily remove air from tires, allowing for storage or compacting of tires. I have tested this on bike…
Replacement vaporizer head for NE-C28P, 3D design thanks to Mervin
With this nice clip-on dosing funnel, your can load up your chamber of your Arizer glass stem without spilling something. 13.06.2025 Update : added various sizes for the Funnel added Tamper added new Base new feature unlocked “storing Mode”
This is a 7 piece set that includes the Main body, 5 adapters, and a Vestratto Anvil Vaporizer. It is for display only and completely non functional. Makes for a great desk piece. I printed it solid in resin, you could certainly try…
the pods have dimensions of 10mm outside and 8 mm inside so maybe others fit too
You need 8 Magnets with Dia 4x3mm for the Cap, ensure you place it in the right direction. For the Cap you need to do a quick color change over the first 0.6mm You can use all straight glass stems from 70mm up to 110mm including the…
A simple filament dyer that should work with most filament sizes and printers. Uses a standard Sharpie permanent marker (other brands should work, as well) as a pigment source. The simple design allows for easy changing of markers…
Laptop Stand Rizer, distanziale per pc portatile Nice and elegant riser stand for your laptop. Print instructions: Use PLA or PET Use 0,30 mm layer height with 10% infill No support o brim needed
This is a jar for five capsules of the Wolkenkraft Äris (Ultra) or FX Mini. The capsules are ⌀ 10mm and 12mm in hight. The jar itself measures ⌀ 40mm x 22mm height. You may also like this for the Norddampf Relict .
created after losing the original
Frizerator H4A1 Frisbee Launcher Pistol Remix of Dave Delay's Fizerator H-4, https://www.thingiverse.com/thing:693465 New feature of the remix: Powered by easily available rubber bands (30 mm ... use 2 or 3 to achieve desired power).…
DEUTSCH: Das ist eine Docking Station, ein Kapselaufbewahrerhalter und eine Befüll Station für die Dosierkapseln für den Norddampf Relict Vaporizer entwickelt. Die Befüll Station kann jedoch mit jeder Dosierkapsel mit dem Durchmesser von…
310 mm (12.2 in) Roger meat tenderizer I made mine on PETG shaft and handle our normal infill but the head 50% infill for weight. mine slid right together snuggly you might want to glue it if not but I didn't. The handle will probably…
This is a design from Grabcad by Acop Minasean, https://grabcad.com/library/305766 This design has been around quite a while as a gimmicky kitchen utensil, so i am not sure if this is his original design. I went through trouble to change…
Have Fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts
Present for a friend but I thought others might like it too. its a clone of the fenix mini vaporizer i think.
This is a little box for herb storage, made to fit inside the Pax Vaporizer case from this link: https://www.printables.com/model/705119-pax-23mini-vape-charger-case-combo-storage But you can always print and use it however you like, as a…
Version 2, Sun Dec 20 2024 Replacement shell for repair of Storz-Bickel Mighty vaporizer. USE AT YOUR OWN RISK Please watch the temperature, do some research before choosing the right material & use. Please share your experience! Hope you…
Simple Diffuser Shade for Aerogardens! update 27dec: i just made a 360 version! update 19dec: i just made a Bounty version! it is upside down by default. please turn it around so the lip is onto the deck of your printer. WARNING i made a…
I designed these shoe deodorizers for my sons basketball shoes. They were modeled in Fusion 360. They are filled with silica gel (aka - crystal kitty litter), which can be dumped and replaced when it's no longer effective. Printed with a…
Hierauf könnt ihr den Inhalt des Grinders schütten und dann in den Vaporizer füllen. Es stehen zwei verschiedene Größen zur Verfügung. Bei Bedarf könnt ihr die inneren Flächen mit feinem Schleifpapier glätten. You can pour the contents of…
The source marked this model as adult content.
I am excited to get my first harvest of mint and thai basil from this Aerogarden Harvest I got as an early christmas gift…. The only issue is the thing is so bright it lights up my entire house! It is probably brighter than all the lights…
The Just-A-Rizer XL is an upgraded, feature-packed LED riser engineered specifically for the Snapmaker U1. Building upon the original design, this expanded version adds crucial extra headroom, encloses the rear frame, and introduces…
This is a jar for five capsules of the Norddampf Relict. The capsules are ⌀ 11mm and 12.5mm in hight. The jar itself measures ⌀ 51mm x 28mm height. You may also like this for the Wolkenkraft Äris Ultra .
simple quick'n'dirty and thin funnel against those crumbs. use vase mode. diameter of funnel end is 14,6mm. super simple design, no rocket science, uploaded this only for the lazy. it's not very sturdy, but can be reprinted easily.
After stumbling across something called JarHeadz on Reddit, I thought — hey! I've already made that! I didn't know if people would want a similar model. I've been using the Arizer Solo II model with the SpaceJam for about a year now - and…
Little clip stand addon for the Plenty vaporizer by Storz & Bickel. Just clip one or two of them under the Plenty and it won't fall over anymore. Have fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Doesn't Matter…
Based on commercial tennis ball savers. Put up to 3 tennis balls in, screw down. You will need a 3.5mm thick o-ring in the groove. 65-70 mm internal diameter. lube it with a little vaseline. This creates an air tight seal so that when you…
3D model of a Triceratops skull , featuring dramatic shapes and an open jaw for a fierce, prehistoric look. Features: Design based on the iconic Triceratops Dynamic open-mouth pose Printed in one piece, no assembly required Great for…
I struggled to find a stand that made it easy to charge or store my Arizer Solo II on my desk. The stand has two positions: storage and charging. The storage position stands straight up, while the angled position allows easy plugging in…
Created a small tamping tool for the Arizer Solo II to gently pack the dry flower in one press (may work on solo I but I only tested with what I own) Category: Hand Tools
The button on my Solo 2 vaporizer broke and I didn't want to spend $170 for a new one because of a few cents worth of plastic. It took me longer than I care to say to realize how the device is assembled, but once I did the design itself…
I got tired of constantly flipping the multi-tool around to have the vaporizer stand while I was prepping it. This prep tray allows you to keep things organized. It could also be used as a stand during use if you have the water pipe…
A handy funnel to help load Arizer ExtremeQ dry herb vaporizers or other bowls.
The Idea Most motorization projects require electronics knowledge, soldering, and sourcing sketchy electronic components. Not this one. By leveraging the motor block of the Femobook A2 , you get a high-torque, low-RPM motor with built-in…
Just a simple funnel for a dry herb vaporizer with a build in stomper. It's designed fot the Yocan Hit but maybe it will fit others, too.
Increased funnel width to ~60mm Added neck to stand for added support/stability
Use this attachment, you can add some color to your filament. Work best with colorless transparent filament. it will fit this sharpie. https://www.amazon.com/gp/product/B00006IFIA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Use this badge to label any storage / transport cases you use for your Storz & Bickel Volcano. It has a recess of 1mm on the back, so any double-sided tape with a thickness of 1.1mm (like 3M VHB 5952) will work very well. I used an SVG of…
A quick model that I made for storing all the parts that I personally use regularly with herb vaping. This stores the bowls and the various stems for using the provided bags. It also stores the little stirring pick and the remote control.…
The included STL files are some accessories for an AmScope microscope; 1) replacement lens caps, 2) a replacement LED Ring mounting bracket, and 3) parts for adding a polarizer to the Ring Light. Replacement Lens Caps The Lens Caps STLs…
After many revisions of a request, the SHAWNDERIZER is done A Combination of Shawn and the Tenderizer ; the Shawnderizer is a Battery Tray expansion for the HC Diana with a super pointy front end. Has also protected my barrel from copping…
A simple dock to charge your Arizer Solo II in. The Solo II can be slid into the dock from the front onto the charging plug.
2x1 Gridfinity Holder for the STORZ-BICKEL Crafty Vaporizer based on the expandable storage by Zack Freedman. This model was created using the start part from Zach Freedman and then designed to hold the Crafty, the included brush, and a…
Stand for Arizer Stems with space for small parts I was not happy with the normal print file, so i decided to print this thing in spiral vase mode. You can use the Spiralvase Mode Modell / use the attached .3mf file for print instructions…
PLA 7,5 % Infill 0.2mm height no support
Top of my Arizer Q broke during transport. Did not have the top for reference, but measured the device itself for the dimensions. Works as expected for a replacement.
Arizer Air Max case I designed this case for safe storage of the Arizer Air Max when not in use. The case contains placeholders for all the parts you would need for a vape session: 1x The Air Max portable micro-heater; 2x The glass aroma…
Simple Wood Grain Coasters ~ Made with Blender Geometry Nodes I printed these with a wood PLA then sanded them and stained them with a mahogany stain before adding multiple coats of clearcoat. I then added rubber feet to make them feel…
You obviously need a magnet for this, the hole on the provided model should fit a 1.5mm high 4.5mm diameter magnet. If you use the second provided STL you can print it without supports, just make sure your first layer has the adhesion it…
This is a funnel for the Plenty Vaporizer. It lets you use the standard Storz & Bickel grinder to dump it's content directly in the plenty's oven without making a mess. It can still be used as a regular funnel but I would suggest cutting…
This is an easy to print cap for Arizer glass balloon mouth pieces. The ones I originally bought all broke and I bought some others from uncle bezos and they broke too. So I decided to make some out of the toughest stuff I can print, 95A…
For tube printing I used PET G and TPU for printing caps. Category: 3D Printing
Two parts click together for a clean hidden screw front muzzle on your Gryphon. Obviously uses the boxy lower motor cage cover. Put on the first plate with regular nerf toy screws. Unscrew 1-½ turns!!! Press the pokey plate down onto the…
This couples an inexpensive power screwdriver to a hand cranked gadget. In this specific case, it turns a hand cranked yarn ball winder into an electric yarn ball winder. It took a few drafts to get it right. Modeled in OpenSCAD, so the…
A little round base for you to keep your vape upright. Inside hole has a diameter of 12mm. May need to be remixed depending on your needs. Print instructions Printed at .2mm layer height.
I was missing a foot on my Arizer Q and decided to make my own. It works as expected.
Handy mouthpiece designed to fit glass connectors with a 3/8ths inch outer radius. Note: Common red brass nozzles contain up to 5% lead and some makers suggest not making products which come into contact with mucus membranes with brass…
The only difference is that I added a 10 mm rizer to the bottom chain mount. My printer sits on some elevated feet so I had to add this to make up the difference.
A design for a water filter made to filter out microplastics using biologically activated carbon and a plant tissue called xylem. The filtration substrates are a zoomed-in microscopic view of the actual materials. Originally designed for…
Just quick edit at thinkercad to have bigger magnets holes. Strong hold. Can be turned upside down with no problem.
Base to sit tubes and containers upright for Arizer vaperizors
It is a closing or opening memorizer. This accessory is used to always be sure that you have closed the door. Its operation is simple, when turning the key we reach the end of the operation, the key stops and forces the switching of the…
A container for your deodorizer powder so you can put inside the fridge, freezer, a room or a closet. Its design allow to stack one above the other and finally lets you put a lid on the top. You only need a coffee filter per container.
Ripped straight from the fallout 76 game files. 16k triangles 50k vertices
This is a wall mount holder and charging station for the Pax 3 Vaporizer. It's still able to charge while in the holder. I use Alien Tape for mounting. You can also use velcro or command strips. No supports needed
Notice: Most of this is not my work please don't credit me for it, all I did was add a few better parts and organise them. The github has full instructions for how to install and set up. I recommend downloading the files to print from…
Trichter um die Kräuter optimal in den Topf zu bekommen. Und der dazugehörige Stampfer.
I made this model to protect an Arizer-ecosystem water pipe adapter. It's designed for a 14mm. This is my first fusion-360 based project, so any tips or advice is welcome. Would love a shout out or photo of any finished prints!
Einfache Montage für 5 Verdampferköpfe via T-Clip an ein Skadis Board. Die Köpfe sitzen exklusive der 501er Aufnahme 10mm tief im Ständer damit die Dinger nicht rausfallen wenn das Regal mal etwas wackelt. Die Aufnahmen für die 501er sind…
This plug should fit right into the opening of your Tinymight 2 vaporizer and protect it from dust, lint, dirt and moisture (to some degree). Print it in any material you like: PLA, PETG, TPU should all work. I printed it once in grey PLA…
This is a stand for the DaVinci IQ dry herb vaporizer. If you're using the vaporizer with the 10 mm adaptor (the mouthpiece with the stem), the stem prevents standing the vaporizer on it's end while you fill it. This stylish little stand…
Funnel for loading the CF and CFX vaporizers. Remixed based on designs from CodyDoodles
I were really enjoyed coloring my prints with Sharpie markers using Color blender design by Devin Enrique ! So I made an mount for my Comgrow filament dryer box (Also released by brand SOVOL) that makes it possible to attach this sharpie…
A replacement mouthpiece for the Plenty Vaporizer. Have fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Category: Replacement Parts
A loading tray for six of the STAINLESS STEEL DOSING CAPSULES (.3G) sold by DaVinci.
Motive for creation 作成の動機 I purchased a laser cutter (Two Trees TS3) with a built-in air filter, but when cutting MDF, smoke leaked from the device within a few minutes of starting operation, and I could smell a pungent, irritating odor…
Revised to account for rear belted Z in lieu of lead screw Will post photos of it installed once my part arrive and I complete the build.
This is to transport your 19mm e-cigarette protected from outer influences. Fits Joytec 19 or many other D19 products. Print instructions print the areas with threads with 0.12mm layerheigt the rest is printed with 0.2mm layerheight. I…
This is a kickstand for the airmax bubbler attachment so it does not fall over. I printed it upside down with no issues
Just a simple remix of Zrunchos original deck panel to add a mounting boss for the LRS-150-24 PSU that came with my Formbot kit. You will need 2 x Voron spec heatserts (M3 x 5 x 4) for the screw mounts and a couple of M3 x 6mm screws to…
![Herb Box for Pax Vaporizer Case [Check Description for the Case Link]](https://media.printables.com/media/prints/705919/images/5538669_7055d50e-be23-4379-96a0-053a71de9784_400f7731-c4be-42be-80da-203238f3f178/img_7357.jpg)
