Counting matching models…
NOTE: This model is only published on Printables (here) and my Github repo , licensed under GPLv3 license. Any redistributed work should provide appropriate attribution and copyright notice. Large Gear Clockwork2 As title, it's basically…
I've made a modified version of clockwork2 extruder to use my nema17 stepper motor that was lying around. currently there is no option to attach wire cover or use pcb https://photos.app.goo.gl/kay8pqxwpjpPym6F9 video example of working…
Remix of WouterE_ Ender 3 v2 Stealthburner mount. Modified to fit the stock Clockwork 2 files, spaced out to fit the HartK Stealthburner toolhead board, BL-Touch mount has been removed, and a groove has been added to the rear for the…
Update: I made the ECAS hole tighter with the anchor groove from 8.5mm to 8.3mm and added STEP file Switches are Omron D2F or compatible. Ball is 5.5mm Selftaping screws 2x10 or M2x8 Tested with TPE88 filament. If you want use both…
Parts should fit perfectly if printed with recommended Voron settings. For those who want to put in on Voron SW, you may need to edit or sand a bit of the carriage parts(to which you attach mgn12) as it may interfere with the stepper…
I remixed the plate, because it didn't fit the ClockWork2 mod. the 2 upper stands were to high, the holes underneath were not deep enough and also the walls were too thin. You will find attached the STL and the STEP files of the…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.
UPDATE for the 2023-07-10 version : The upstream model by @nhchiu was updated with some fixes. I uploaded an updated main body STL for LGX gears and with the ECAS coupling because that's what I personally use in my extruder. The other…
1-26-There is a new main body and a new cutting arm (to replace the cutting arm from filametrix). The standard cutter arm doesn't allow for enough movement to cut the filament with the larger guidler. This uses the latest model from the…
This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…
This is the next evolution of using stealthburner on the BLV cube for me. Previously, https://www.printables.com/model/261349-voron-stealthburnerafterburner-mount-for-blv-w-orb, I had adapted an existing Orbiter 1.5 mount and designed my…
A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. SB2209 CAN (stm version) not compatible Based on user feedback, support for the…
I was very happy with cliftoce's PUG mount for CW2 but the heatsets were pulled out when I tightened the clamp. Simple remix to move them to the back so they can't pull out. Parts are oriented for printing with no supports needed@40%…
Remixed Adapterplate to use Voron Stealthburner and direct drive Clockwork2 on Anycubic Viper. I made some small changes to fit the clockwork 2 on the adapter plate by fragmon. Just normally print it and it should fit perfectly. I had to…
There are two changes compared to https://www.printables.com/model/426754-stealthburner-clockwork2-main-body-with-ecas-and-r : ECAS hole has small o-ring of 0.1mm to make ECAS stay in place, as depending on how it is printed it is not…
I added the 3DO pcb holder to the latest files from BigTreeTech for the EBB SB2204/SB2240 Clockwork2 main body and pcb cover.
Stealthburner PCB is in quite hot conditions and some airflow is good for cooling. Did not want to add additional fan and existing remakes are fully perforated. Thought that less is more here also…
my Brain Slug version works fine and EBB is around 36°C that really nice.. Fan is mounted with heat inserts for M2.5 and M2.5 screws with 8-12mm length Every time I look at it I think about this https://futurama.fandom.com/wiki/Brain_Slug
Adding an ERCF V2 to my Voron, could not find Filametrix CAD that incorporated both filament detection switches, M6 threaded bowden, and compatiblity with my LDO PCB. Expect this is a very narrow combination of desirable features but…
Model adapting clockwork 2 body to fit bowden PC4-M6 coupler to use with bowden extruder
Modified the original design a bit to better suit the sb2209 can board, also made the screw hole bigger for pcb cover.
Reduce weight and enhance heat dissipation for SB PCB cover.
Při tisku nejsou potřeba podpěry. Postavte model na přední část. Doporučuji 100% výplň. Šroub M5 se šroubuje skrz lučík do redukce. Je to proto, že nebylo místo pro adekvátní šroub a Marui vs. HK mají v lučíku různé závity. V pouzdru…
Need a gridfinity-compatible toolbox ? This may be it. With one or several stacked plates and a handle for easy moving, you can build your mobile storage system. You can even stack the boxes on your shelves to save on horizontal space.…
During installation of our air conditioning, one of the screw covers disappeared (of course…). The visible screw was really bugging me, so I decided to remodel it and try to 3D print it. The part came out quite nice! Of course, there is…
This is rear mount for GEPRC dual antena ELRS receiver. Please print it with TPU 95A or above. You have to print 2 pieces for one drone Category: R/C Vehicles
This is a super scuffed (my cad skills at time of upload are horrendous) but functional remix of the hartk pcb cover for the CW2 extruder. I have a rear facing umbilical as I'm using the hartk 2 piece toolhead pcb set for my Trident, so…
I went looking for an EBB42 mount to the back of the stealthburner, but most everything that I found would fit a obiter X.X extruder for the stealthburner. As like the rest of my designs/work that I do, it's all done in Microsoft 3D…
This support allows the use of a PG7 cable gland on the StealthBurner toolhead when using the SB2209 CAN board, providing a cleaner, safer, and more reliable cable management solution. The design properly guides the CAN cable, reducing…
Door for cabin filter for diy install filter. More info here
Mount for XT60 socket and VTX antenna in your FPV drone GEPRC Category: R/C Vehicles
I wanted to use an old hall sensor with filametrix and the ERCF but couldn't find one
Voron ClockWork2 Extruder for Ultimaker2 with Volcano Hotend and 4010Fan Note. You can get STLs for small parts of cw2 on voron official website I mod mine from orignal UM2 hotend but I've already done many mods before. So I cannot…
Clockwork2 remix to use with NEMA17, fixed with PrusaSlicer tweaks at May 28, 2024 You print those models and gliders/latches from the original github repo…
Remixed https://github.com/VoronDesign/Voron-Stealthburner/blob/main/STLs/Clockwork2/chain_anchor_2hole.stl Cablechain fixpoint taken 4mm upwards and 4mm -X direction to give more space to connector.
This is a work in progress. Not sure how it will print or even IF it will print. There are some pretty ugly gaps under the solar panels. What do you do when your Y-wing has two blown engines and you are stuck in the outer rim with no…
GepRC Mark2 arm bumper. Must be printed with flexible filaments otherwise it will be impossible to mount! No support needed! Use mirror function for left arm Print Settings Printer: Hephestos2 Rafts: No Supports: No Resolution: 0.2…
PG9 without thread Please use two suitable M3 screws to tighten
Made a small change of SB2209 anchor for clockwork2. During my assmbly I couldn't find an anchor component that fits both spring steel and an umblical. So I simply combined two I found on the website. One from the official clockwork2 stl,…
Front bumper for GEPRC Mark2 5" drone Please use TPU 95A or above Category: R/C Vehicles
I wanted a little ventilation for my Nitehawk-SB so I remixed the LDO CW2 cover. The cover has a complex face which makes adding a pattern tricky. Print with the standard Voron settings in ABS or ASA.
Holder for SpeedyBee TX800 GPS in GEPRRC Mark2 5" Please use TPU 95A or above Category: R/C Vehicles
PG7 cable gland mount for the fourth toolhead on Voron 2.4 Stealthchanger to match the position/height of the other three toolheads using standard Clockwork2 extruders and @CstmCreations_174350 's PG7 mount. Hopefully this saves someone…
Camera holder for the newbeedrone Mark2 VTX Cam
filament senzor added
When using no guide or the 50mm radius guide from @Exerqtor_82339, then the reverse bowden tube scratches and drums against the top panel of an LDO Voron Trident 300 Rev.D+ with a Stealthburner Clockwork2 Filamatrix. A 5mm smaller radius…
Filament guide Filament rubs on my printed solid case and makes a really loud noise. Here's a video showing the problem: https://imgur.com/a/Bv0gyx9 (also includes video of my mark 1 design). This model replaces the clear acrylic top that…
Motor and arm protector for GPERC Mark2 5" Please use TPU 95A or above Category: R/C Vehicles
Foxeer Box2 mount for GepRC Mark2. Must be printed with flexible filament! I printed my version with Filaflex, which is pretty elastic material and the camera is kept in place very tight. Maybe with a more stiff TPU could be very…
Meowburner, the Puurrfect Stealthburner
Use the bracked to mount them to the top extrusion Use cable clips to clip the mess of wires in a cable shroud to the extrusion to route it to the board.
The minimum radius of my cable chain was too large, so at the leftmost position, my Stealthburner was pushed upward, limiting the printable area. Therefore, I modified BTT's original cable bridge and added a small 45-degree piece.
I accidentally ended up printing a newer X Carriage that replaced the HS inserts with screwholes. While I managed to get two nuts into the holes and managed to insert the left screw I failed misserably inserting the right one. Ther was…
Keychain Edit: Added larger version :)
Designed for use MSW-21 switch (aditionaly used MSW-22 with remove lever). Mounted by M2x12 screw. Extruder switch use with 4mm stell ball. And toolhead switch with two pieces of 3mm steel balls. Redisigned for use smaller heat inserts M3…
Per the instructions in the listing , you need to slightly modify the guidler model to fit this new gearset. This saves you the trouble
This support allows the use of a PG7 cable gland on the StealthBurner toolhead when using the SB2209 CAN board, providing a cleaner, safer, and more reliable cable management solution. The design properly guides the CAN cable, reducing…
PG7 cable gland mount for the fourth toolhead on Voron 2.4 Stealthchanger to match the position/height of the other three toolheads using standard Clockwork2 extruders and @CstmCreations_174350 's PG7 mount. Hopefully this saves someone…
