Counting matching models…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant
Spider Man Bust | Spiderman
Print approx. €19.58–€23.93 excl. taxPreliminary estimate for one variant
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
This is a Remix of Comfortable Leatherman Wave belt holster by WaveSupportApparatus. Mostly the changes are of a cosmetic nature i.e. I've tarted it up a bit by rounding some of the hard edges. I've also engraved the words " Leatherman…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
German Kugel Grenade Model 1913 (11/18/2024) Added grenadeandpin2.3mf and its corresponding G-code -Took 3dbob's advice and added about 1% to the x and y on just the Grenade body. Should help with a better pin fitting and ease of screwing…
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
Contains an power socket cover blank and one with a Clip for e.g. Router power supply for german power sockets. Printing with PETG recommended due to flexibility. Enthält ein Steckdosenblanko zum selbst modifizieren und eine Clipversion…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
Remixed keychain case for the Hormann HSE4 remote control without screws. top lid is wit 2 or 4 buttons printed from PET-G or ASA
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
This bracket was created to hold a Hormann HS1 type door remote. It can be screwed to the wall using 3.5mm wood screws. This should also work for other Hormann HS remotes such as the HS2, HS4 and HS5 although as I don't have any of these…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET
I customized the entry of Gloomsen (https://www.printables.com/de/model/211006) a little bit: thin out the walls, for faster printing add an edge to the cover and thicken it a little bit, to make it easier to remove the cover from the…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
The most pluck-in holes are not deep enought for easy removal of socket protectors. This one has a deep of 12mm. The part has a total height of 16mm
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
Neues Gehäuse für einen Garagentoröffner von Hörmann HSE-868 Zur Montage benötigt Ihr noch zwei Schrauben M2x8mm mit Mutter und den Ring zur Befestigung
Print approx. €0.99–€1.22 excl. taxPreliminary estimate for one variant
I combined the two bit holders made by Leatherman into one single piece that fits behind the tool in the pouch. The bits slide in and out ok, but the tolerances are tight enough so they don't fall out too easily. Some might need a good…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
Serre-joint dormant pour serrage de grandes pièces et montages, des panneaux, etc. Les tests donnent un serrage de plus de 75 Kg sans problème, ce qui est suffisant pour bien coller s'il n'y a pas besoin de contraindre le bois. Pour des…
Print approx. €4.51–€5.51 excl. taxPreliminary estimate for one variant
No supports required for printing. I'm providing three models here (2 just with the same original proportion, and one improve for better details). One includes the complete knot, while the other is a diagonal version that conserves…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
First 2024 design in my Bookmark Tanks Collection! For this design I tried to capture little more details in the model without losing simplicity. I hope you like it! Introducing Sherman M4A1! Sherman M4 bookmark for those thrilling war…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
These are card dividers for my insert/organizer for the board game The Lord of the Rings: Journeys in Middle-Earth. These dividers are in German.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed No Brim needed Scale it as you like :)
Print approx. €5.42–€6.62 excl. taxPreliminary estimate for one variant
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: 160mm X 160mm X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: FRANCE, GERMANY, POLAND, ITALY.
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
The side sections of a Leatherman are useful to hold additional tools such as saw blades, a pen or the bit extender but I always found they would fall out. So, I designed this simple holder with just enough clearance for the blades and…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
One idea. One prompt. One incredible model. Superior Spider-Man was a blast to work on, and seeing the mechanical arms and dynamic pose come together reminded me just how much creative freedom Neural4D offers. If you've been thinking…
Print approx. €10.02–€12.24 excl. taxPreliminary estimate for one variant
Deutsches EU-Kennzeichen Lang und Einzeilig mit Spasstext realitaetsnah “MAK-ER 101” UPDATE: added "MAK-ER 1" More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
Print approx. €1.71–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
Leatherman ARC mod that adds the capability to carry original Victorinox toothpick (or tweezers) and pin. You can use the original torx screws that came with your ARC to secure the mod. The pin and toothpick can be bought separately on…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Pomo para armario con el logo de spiderman homecoming del traje, con metrica M7x1 6H Se recomienda impresion con soportes a resolucion 0.16 idealmente, relleno al 25%. Puedes realizar cambio de filamento para que el logo sea de un color…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
it's an enderman from the minecraft game in 2d for wall decorations
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
A new series Dr Who Cyberman keyfob in two sizes, 70 mm x 72 mm x 2.5 mm and 52 mm x 54 mm x 2.5 mm I've included the .gcode from PrusaSlicer for the colour changes. Print instructions Category: Keychains Summary A new series Dr Who…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Deutsches EU-Kennzeichen Lang und Einzeilig mit Spasstext “MEINE PERLE” (= my pearl) More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for PETGSource material: PET
As you can see … Robotiocracy is going on …. and on …. and on This particular robot appears in several Superman comic books. They are the minions of the character Brainic. They change quite a bit over time, but the overall appearance…
Print approx. €24.20–€29.57 excl. taxPreliminary estimate for one variant
Deutsches Beispiel EU-Kennzeichen "NE-RD 42" Lang und Einzeilig. Diese Varianten sind auf den kleineren Normmaßen (420mm & 460mm) für Kennzeichen. More of my license number plates:…
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
The original design was great, IS great, but over time when printed in petg the sides start to warp apart. They also catch on things at the worst times possible. SO. I've remixed the design to tighten up the belt loop just a touch, and…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
the band's logo has been changed to avoid unintended and unwanted comparisons to the "s-bolts" logo of the Nazi Party's
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Just squeeze the folded bag top until it is relatively thin and effortlessly slide the clip over the fold. The color change layers used for the print in the photos are in the provided files. You may want to import the STL file into the…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
Hello friends from all over the world :) This is a piece of art. Handmade in a craft bakery. You can print it in different sizes. I scaled it down to use it with a keychain or for decoration, but you can also print it in original scale.…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Deutsches Beispiel EU-Kennzeichen "CO-RE 1" Lang und Einzeilig. Diese Varianten sind auf den kleineren Normmaßen (420mm & 460mm) für Kennzeichen. "CO-RE 1" Fan number plate More of my license number plates:…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
Description: Sometimes the chase for a mosquito or a fly takes longer as expected. Constantly keeping the finger on the button is exhausting, so there had a solution to be found. This gadget allows you to keep your Insekten Schröter or…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Model do powieszenia Mercedes-AMG F1 W14 E Performance
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
You can never have enough synths, so I made this mount for my Korg Monotron Delay which attaches to the handle on my Intellijel case. No supports needed. Go ahead and edit it and attach your own gear!
Print approx. €4.85–€5.93 excl. taxPreliminary estimate for one variant
Deutsches Beispiel EU-Kennzeichen "CORE ONE L" Lang und Einzeilig. Diese Varianten sind auf den kleineren Normmaßen (420mm & 460mm) für Kennzeichen. "CORE ONE L" Fan number plate More of my license number plates:…
Print approx. €2.12–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
Deutsches Beispiel EU-Kennzeichen "CORE ONE" Lang und Einzeilig. Diese Varianten sind auf den kleineren Normmaßen (420mm & 460mm) für Kennzeichen. "CORE ONE" Fan number plate More of my license number plates:…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET
If you like to go shopping by bike or with a backpack you know the problem. Where and how do I put the cream cup that it does not break and everything in the bag is divided up evenly. Therefore, here now comes the solution. I have a…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
The printing process for each piece is set to pause midway, allowing you to manually insert an 8x2 mm magnetic disk (which can be purchased from any online retailer). Since the magnets are fully embedded inside the pieces, no glue is…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Aktualizace 15. 10. 2026: přidány soubory pro dvoubarevnou variantu (Prusa XL 2T) a tiskové soubory bgcode, doplněn seznam filamentů a nstavení tisku. Geometrie kostky se nezměnila. Hrací kostka na osobní zájmena v němčině: ich, du,…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
German helmet themed car decoration 50mm diameter
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
this is a high preformance ball i specifically designed to bounce as well as possible without the need for supports and that works well with basic cheap and easy to print materials such as PLA works better for PETG. The PETG i recommend…
Santa Hat now available! Download it here! A base/diorama builder is now available for download for this mini figure model! Download the different tiles here for the Enderman to carry around! _____________ IMPORTANT NOTE ON COMMERCIAL USE…
Check out this Spider-Man headphone stand! 🕸 It's the perfect way to keep your desk organized and show off your favorite superhero. I'd appreciate a Like if you enjoy my work! Don't forget to visit my profile for many more cool 3D prints…
CHECK OUT v2 AT: Sherman M4 - Kitcard von Crea_Hicks | Kostenloses STL-Modell herunterladen | Printables.com Just a simple sherman Kit Card. Easy to assemble and easy to print.
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
<original part : https://www.thingiverse.com/thing:4600030/files
I had so much fun making this that I plan on making more similar flying models- but I don't know what I should make next. Another WWI bird like a Sopwith Camel? Something bizarre like a pusher prop F-104 Starfighter? Something else…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
I printed it on back, with supports, with 0.2 mm layer height. I used Prusament Galaxy Black. Update: I made more robust version with bigger limbs (and slightly bigger gaps in joints). I sugest to print V2 with max 0.15mm layer hight
If you like my models you can support me on patreon, where there are new models https://www.patreon.com/windblatt3d
3D Printing Instructions: Preparation : Download the 3D model files of Charmander's head and body. Import the files into slicing software (e.g., Cura for FDM, ChiTuBox for SLA). Orient the head and body to minimize the need for supports,…
Update: Added a new version that is compatible with both the K1 and K1 max. The cooling performance is unchanged and the old versions are still there if you prefer those. The changes are: Updated appearance - Like me, it looks better in…
This is a set of parts I made to re-enforce the 3M adhesive used to mount Govee Permanent Outdoor Lights Pro (H706A). Light Mount : A small frame that goes around the outside of a light that can be screwed to the mounting surface to…
The green mat is 1 meter for scale. You can count frames to determine the speed it you like! The video is at 30 fps like all standard youtube videos. It covered the distance in about 1.2 frames, so it is going around 25 m/s, or 90 km/h. I…
-Update: Thank You for 600+ Downloads! -Update: Thank You for 400+ Downloads! A Spider-Man collection create by dode513 from his own archive. All models are made for a smooth printing experience. If you liked it, don't forget to leave a…
A bust for the tribute of Superman played by Christopher Reeves. Perhaps you'll like it Print instructions I recommend the support under his chin
For full body print please download: "charmander_full" For split parts (minimum support) please download: “charmanderPART_body” “charmanderPART_base” “charmanderPART_key” Brim and support are recommended
__________________________________________________________________________________________________________________ Collection of all my upgrades for Ender 3 V3 SE Heatblock fan mounts: Best airflow 4020 mount 4010 fan mount Smallest 4020…
Simple example of PrusaSlicer multi-material paint functionality to produce a Red+Blue+Black+White. Picture included used Polymaker PLA Matte Filaments; white always requires additional purge. Bottom of pants with supports could use…
This is my model of the SSV Normandy SR2 from the Mass Effect series. It is the Alliance version from the third game. The model is some 50cm long and is a kit. The pieces are divided per their color. For the assembly, I recommend to watch…
Doberman Dog Decor . Feel free to scale it as desired. Printed with Fuzzy Skin effect. Fuzzy Skin: All walls Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 Happy printing! With more and more questions popping up about the…
If you download the model, please don't forget to leave a like. Thank you! <3 Unleash the fiery spirit of the iconic Charmander! This unique design transforms the familiar character into a stunning low poly art piece. Each angular line is…
Hi I created a trophy/statue of your favorite marvel hero spiderman. This is a great decoration or a perfect gift for any movie fan and avid gamers. For the best look, print at the highest quality. Use supports. The model consists of two…
A Bust of Spiderman - easy print - you can print it hollow i closed the base on all sides ! Printer : Artillery Sidewinder X2 layer height : 0,1 line width : 0,6 no support ; no infill ; print time ~ 22 h Sunlu Silk Blue PLA MakerWorld :…
print in 0.1 to 0.3 layer height, prob best with petg or pctg but used bambulab pla+ basic print in place recommended: print with brim and supports works the best
Own a legend of automotive performance with this 3D printable STL model of the Porsche 911 Turbo (930). This classic German performance car model is perfect for automotive enthusiasts and fans of iconic 70s and 80s supercars, showcasing…
Muñeco estilo funco realizado con ayuda de inteligencia artificial
I started with a 1:5 Legoman by papajohnfuller and then remixed it to be spiderman. I took inspiration from the actual lego spiderman, but felt that it was a bit weak. It didn't have enough red for me, so I used some colour changes to…
🇩🇪 Willkommen in Deutschland! Welcome to Germany! The Brandenburg Gate ( Brandenburger Tor in German) is an 18th-century neoclassical monument in Berlin, built on the orders of Prussian king Frederick William II. Throughout its existence,…
The Man of Steel, now in plastic! This is my Superman variant of the Dummy13 figure by soozafone I used the 2x Muscled arm for dummy13 and the Hunky variant This requires a well-calibrated printer and I printed at 150%. The hair has to be…
The Singer 911 DLS Turbo Road is a masterpiece of automotive artistry — a modern restomod inspired by the legendary Porsche 911 , combining classic aesthetics with cutting-edge engineering . This model faithfully captures the signature…
If you're looking for my Bambu print profile, you'll find it at MW . Minecraft Creeper, Skeleton, and Enderman Bookmarks My son wanted a Minecraft Creeper bookmark , but surprisingly none of the printable ones we found were quite right.…
Jebediah Kerman from the game Kerbal Space Program in his IVA suit. the suit is a mix from the different suits that the game had along the different versions, cinematics and the ACES suit. I printed it at 250%, .08 layer height on my…
Hello friends. I want to share with you my figure for 3D printing of Spiderman. The model is available without supports. You can support me and subscribe to my Instagram 😊 https://www.instagram.com/monster_prey/ You can download other…
Subscribe Now! A very good model from Davidd26. Time-lapse print video : https://youtu.be/Ljx36CBOkzY Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Pequeño Llavero de Spiderman para imprimir en 3 colores con alturas de relieve diferentes para el cambio de filamento. Especificaciones Para imprimir el llavero y que los cambios de color se hagan correctamente la altura de capa debe ser…
Nette Abdeckung für die Anhängerkupplung =)
Spiderman logo coaster with a black trim. Print with PLA/PETG - no supports/brim required. 2 options available: Print in one part, using your slicer to pause for a colour change between base and top logo layer. Print in 3 parts. By using…
To use the cookie cutter, you need to roll the dough to a thickness of 4-5 mm. If you want thicker dough or a larger cookie, you can stretch the model with a prusa slicer Easy to print from PLA, without support. Don't clean it in the…
found it on the toolbox (toolbox has no copyright laws)so now its mine i dont know if u can print it but it should work supports are recommended also printing it standing up is also recomended MORE MODELS ON SKIBIDI TOILET ON MY ACCOUNT
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
Model printed entirely in PLA, given the abundant quantity of details, I recommend a print quality of 0.1 for the small parts and 0.1 or 0.15 for the remaining parts. No screws are required for assembly but only pieces of 1.5mm wire to…
Description Commercial Use: Do not Sell any printed copy of my Models without the Right license, if you want to Sell my Models you can buy a license on my Website www.ebmeier-3d-Druck.de under the Shop Page commercial license.…
It’s a 1:64 VW typ 82 Kübelwagen on runners. Wheels spin. Easy multi color. Use a pair of flush cutters to separate the parts then assemble. Print settings: Supports: under ends the of fenders under hooks under number plate under exhaust…
A highly detailed and realistic bust of Superman , capturing the timeless strength and heroism of the Man of Steel. This 3D model features the iconic elements that define Superman – the strong jawline , flowing hair , determined…
-Two colors -organic support -0.15 layer height
A frogman. Somebody forgot to drain the swamp and now it strikes back with pointy sticks. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE…
The original throphy is 540 mm tall so is the model, so you'll probably need to scale it down or cut it into pieces. I've uploaded the cutted version, and if you don't have an mmu or an ams unit you can print first the whole thing without…
Modified the ears so they were more printable, overall smoothed out the model too. Sliced the bottom so it sits flat. Category: Animals
Download Bust of Superman kills The Joker Injustice League STL for 3d printing by CG Pyro fanarts This bust is part of the Superman Kills the Joker package which is a diorama in 1/6 scale and scalable without problems to 1/4, you can find…
Detailed soldiers If you like this feel free to check out my other models
Spiderman keychain This print is designed for a bambu labs printer with AMS or any other printer with multi-color setups. You will get the stl file and the 3mf file that will come pre-colored. Just load your filament and print. 3mf file…
