1,023 models
Disclaimer: This design is inspired by the Spirograph drawing toy. 'Spirograph' is a trademark of Hasbro, Inc. This product is not affiliated with or endorsed by Hasbro, Inc. A simple Spirograph drawing template gear kit that leads to…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Spirograph Have fun by drawing with this Spirograph and the various gears! --- The round gear guide has 84 teeth on the inside and 108 teeth on the outside. The linear gear guide has a width of a 24 teeth gear and a total of 54 teeth.…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Customizable car / bike tire valve (Schrader) cap with thread. The thread starts from the middle so you don't need to make so many turns and it's easier to put on. There's an extra space for a tip. Print instructions Any filament works…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Follow the official blog post: https://www.prusaprinters.org/?p=8875&preview=true First 3D print enclosed files. There are no special requirements for the printing nor the assembling. The inner circle just click into the spool. Other…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for one variant
Use the gear around the stencil to make cool looking geometry and make it with many colours Print instructions Print it at 10% infill
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Plate Caution 3D printing 200x200 mm in three colors, gcode PTEG and PLA is in progress.
Print approx. €5.25–€6.42 excl. taxPreliminary estimate for one variant
This top gets its name from the patterns on the top and bottom. They remind me of the designs I created as a kid using a Spirograph . Want to show off your top? Download my Display Stand for Tops . The top prints well from 100% down to…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
This is a variation of the spirograph toy with several rings and discs for spiral patterns. Nice for kids to wile away a rainy day, as well as adults who have to endure boring meetings. Please let me know if you come upon interesting…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Our Spirograph for Post-its is an innovative and fun addition to your desk that turns ordinary adhesive notes into intricately designed works of art. This unique tool combines the classic charm of the Spirograph with the practicality of…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
I did not glue the knob. I just pushed it on an it holds perfectly. You can print few more boxes without lid and just stack it on. If you have too many kids, you do not need to print all things for every single kid. You can have for…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
See also the new version with air vents . As I didn't really liked the original housing of the CV-Programmer by mXion, I just created an alternative. To prevent the electronic board from moving inside, I suggest to add a small…
Print approx. €1.68–€2.06 excl. taxPreliminary estimate for one variant
Hi i did a new design of the ikea Brogrund because mine broke into two pieces while cleaning. And since i only needed a single side i designed it to be printed on a prusa mini bedsize. You need the mounting piece of the original Brogrund…
Print approx. €6.70–€8.19 excl. taxPreliminary estimate for one variant
This is a clip-on hook for the IKEA BROGRUND corner shelf , specifically meant for a IKEA LILLNAGGEN squeegee but obviously for other hookable stuff too. The hook diameter and clip width is 8mm , dimensions: PRINT INSTRUCTIONS No support,…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Washing Machine Programme Selector Control Knob Advices This control knob is responsible for operating the programme selector in your washing machine. The part replacement conserve the original dimensions. Few adaptations was made and it…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
Vyučující si prostřednictvím Scratch stavebnice připraví prostředí pro procvičování programování ve Scratch bez použití počítače.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Replacement lock for Luxaflex Duette shades. The wires of our Duette shades cut through the original lock part. My apologies for the bad photo's. I already installed the lock and I am hesitant to take it apart just for some photo's :-)…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Enclosure for a USB-C PCB and a GX16 6 pin connector. Optimized to not need print support. PCB size110x63mm
Print approx. €5.72–€6.99 excl. taxPreliminary estimate for one variant
Epstein-Barr Virus is a double-stranded DNA virus which causes lifelong infection in human B-cells. EBV was one of the first human viruses linked to rarely initiating a cancer, Burkitt's Lymphoma. The EBV viral particles are covered in a…
Print approx. €34.51–€42.18 excl. taxPreliminary estimate for one variant
Clips onto the lip of a trough to hold a phone or other small items during an ice bath.
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for PETGSource material: PET
Žáci si změří rozměry destičky Micro:bit v2 a připojeného boxu na baterie. Poté v programu Tinkercad vymodelují společně s učitelem obal, do které se schová krabička na baterie i destička.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
UPDATE : New version available https://www.printables.com/model/390212-coaster-printing-in-progress-spiral-edition ---- This is a coaster representing a nozzle extruding filament, it will prevent any spilling on your furniture. The…
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
Originally taken form a woodwork blueprint and adapted for 3D printing. Shape is rounded and the gears are bigger to adapt for children's use and fun. 23 Sept. : A higher frame has been designed around the gears, and a new file with this…
This will hopefully, one day be a complete model of the Creality Ender 3 S1 printer. It is currently still a work in progress. I modeled everything off of my own Ender 3 S1, so I cannot guarantee that yours will be identical. Please note…
Jebediah Kerman from the game Kerbal Space Program in his IVA suit. the suit is a mix from the different suits that the game had along the different versions, cinematics and the ACES suit. I printed it at 250%, .08 layer height on my…
I waited for a month for the original author to respond wether there will be a V2 for 54mm portafilters, and then decided to make my own. This is not a scaled model, but a re-computed one. Please follow the original Umikot instructions…
For assembly there are some M3 bolts in different lengths needed and I used 0.3mm nozzle cleaning needles. The holes for the bolts also need to be drilled to the right size and the needle sleeves have to be drilled for the needles you have.
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- This spirograph is part of the Drawing…
I designed this DNA-shaped growing tower for my students. It is a multipurpose, modular growing system that can be used to grow microgreens or as a decorative planter that brings more greenery into a living space. I particularly like the…
Remix based on: Yeezy Slides (Printable) By Orangemn6 Yeezy Slides separated (right and left one) and scaled. Shoe Size: 9.5 US MAN / 7.5 MX Scale it as you'd like UPDATE: 18/08/22 I printed right slice and it was a bit smaller than…
EDIT 9/27/26: Added new, basic assembly instruction and updated (incomplete BoM) EDIT 3-7-26: Uploaded files for the new, Linear Bearing 3D Printed Focuser! The focuser drawtube runs on two LWL7B Linear Bearings with a T5 Lead Screw for…
This is a crank driven manual (non electric) WDT tool. It helps get rid of clumps in your coffee basket and evenly distribute coffee before pulling a shot. 3D printing settings: My tool was printed with ABS+ @ 0.4 nozzle, .2 layer height.…
READ BEFORE ATTEMPTING TO MAKE!!! I am no Edaan, Nascarsimracing1, or Connor Cruz and my designs are not the most professional!! This means certain parts of the model are not designed perfectly. This mainly includes the connection between…
Print all at once or separately. Inner gear with 48 teeth is not included in the “Spirograph All” file, so it will need to be printed separately. You can print at 0.3mm layers just fine.
This spirographic WDT is designed to be used with a 58mm portafilter basket. The design assumes the use of a few third-party parts, however, I'm still tweaking the design to accommodate these. V2 Updates: Requires m2 screws and hex nuts…
This is another entry for the Coasters design contest. The Coaster is ‘industry standard’ size of approximately 100mm x 100mm. I created a design from one of my favorite toys as a small child - the SpiroGraph. I designed the coaster with…
My version of a spirograph drawing toy. Its designed for easy drawing for kids. Its possible to print in SuperDraft quality (0,28mm) and its still working well. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter…
Contiguous United States (Lower 48) Topographic Map with Hydrographic Features For those times when you just want to print everything at once – this is the lower 48 states in the USA of Plastic project combined into a single model. Lower…
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
[First, let me offer you something fantastic] I've released 22 fantastic customizer programs "Amazing STL Creator". Try them out. Create STLs that will amaze your friends. Right now is the best time to get all my programs. Get the entire…
Holl das Papier und da draufsteht du zeichnen danach anmalen
EDIT - Read full description below as some parts have changed. Please join the discord if you have questions as I may not see them here in a timely manner! - https://discord.gg/QdPa9ed6Jq Building of the success of the DBS114 , I now…
This is accurate enough for you to make mods for the sprite Mounting wheel spacing may be incorrect This file has was made starting with an extruder model ripped from one of the Ender 3 CAD files. The mounting wheels are from the same.
Washington, USA (WA) Topographic Relief Map with Rivers and Coastal Waters Washington, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
YJ board CH341A Serial/Memory Programmer Enclosure YJ board CH341A Pro Serial interface / Memory Programmer Case with exposure of ZIF socket and DuPont connectors. The enclosure holds the board snugly. Led Light pipes optional part but…
This is a variant from my previous design : https://www.printables.com/model/231240-coaster-printing-in-progress There is 2 sizes available : Small size is arround 95mm in diameter Large size is arround 105mm in diameter You can print the…
Perfect gift for little (and old) children! Enjoy ! Here is the original part : https://www.thingiverse.com/thing:905849/
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the Handle and Spin Ring parts without the countersink. This allows the use of non-flathead/countersunk screws. enable support for the handle…
This is a bank card sized spirograph with snap in gearwheels. The model measures 85.6 mm x 54mm x 2mm. Thin enough to fit in a wallet! Prints well in PETG or PLA with the standard 0.4mm nozzle at 0.12mm layer height. Should be printed…
California, USA (CA) Topographic Relief Map with Rivers and Coastal Waters California, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Idaho, USA (ID) Topographic Relief Map with Rivers and Coastal Waters Idaho, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic collection…
A folding sign to warn others that you are printing! Uses a piece of 1.75mm filament as the pin to connect the two pieces. A small piece of electrical tape on the bottom of the legs gives the sign good grip on the floor. The back of the…
This is a simple and easy to print Spirograph set. The set includes a Ring (96) and several Gears (84, 74, 57, 42, 33, 25) with holes in them at 5mm diameter intervals. (The numbers in brackets and on the gears refer to how many teeth the…
This is a WORK IN PROGRESS, I dont think this can be printed yet. WARNING! Update 1, separated the bow, pickaxe, arrow and radio. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of…
Colorado, USA (CO) Topographic Relief Map with Rivers and Coastal Waters Colorado, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
A Desiccant Loop Silica Gel Box for HDRY System Check the HDRY System here: https://www.cc3dprojects.com/cc3d-hdry-system This is a ventilated silica gel box designed to improve moisture absorption inside your HDRY setup. Learn more: The…
Oregon, USA (OR) Topographic Relief Map with Rivers and Coastal Waters Oregon, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic project…
BOM is the Same as the original, aside from the 8 magnets I used to hold the basket in place when rotating. (Fits my 18g ridgeless VST basket nicely) I used blind holes on my design to give the upper part a cleaner look. The use of a…
This is a remix of the great Umikot by @redfoxdude https://www.printables.com/de/model/481587-umikot-58mm-version-planetary-gear-spirograph-espr (more remix information at the end). How to use: Use the printed funnel (base) and pour the…
Florida, USA (FL) Topographic Relief Map with Rivers and Coastal Waters Florida, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
this is basically the same mandrel of the Ivan’s V2 ECM set. but there have been 2 pin’s added so it can be used upside down like the with the V3 ECM set from ImmortalRevolt. but be aware that the V2 from Ivan and V3 from ImmortalRevolt…
P320 FCU Bending Kit (Work in progress) Machine: Klutch 3-1 Manual Brake Press This project is under construction and as I keep tweaking and testing, this will be my landing zone for uploading files and keeping the most current, tried and…
from the dark place where the sewers meet the swamplands. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…
WDT (Weiss Distribution Technique) is a method of espresso preparation to evenly distribute coffee grounds in a portafilter to ensure a more even extraction of coffee from the espresso machine. This tool uses several needles spinning in a…
* Disclaimer : my full spectrum grow led strips is still in transit. I used a regular led strip for the demo, but it is not recommended * Details This microgreens farm is compatible with 5"x5" grow pads or Agar Agar gel. The seeds tray…
Inspired by alecs' Polygons, this is a picture frame for 4x6 prints. This print uses bridged lines to suspend a picture in the middle of a frame in a spirograph pattern. Uses 6x2mm magnets for closing the back to the frame (set of 8, 4…
Perfect for the man cave/hobby room! There are 4 versions, 2 with holes in the corners, 2 without holes and with different fonts. Measures 18 x 11 x 3.3cm
The new design has larger holes in the gears, unlike the photo.
Spirograph A cycloid is a curve drawn by a point rolling a circle over another circle. The branches of cyclodida then resemble a flower or a snowflake. The mechanical aid for creating a cyclodide is called a spirograph. These are two…
Geared spirograph machine with adjustability to experiment! Easy to print, assemble, and operate. The only non-printed parts required are a sharpie (or marker), an elastic band, a 90mm x 90mm piece of paper, and a small piece of tape. The…
A series of heart shaped cookie cutters that can be used to make a stacked Valentines cookie cake.
*This is a work in progress* I'm looking a way to atach the mount to the chasis but there's a few whitout making a hole in the base I use this aux fan from bambu lab…
top_* and base_* are original files from the upstream project. I added topholes.* with added holes for LEDs.
I wanted a multicolor Kerbal so here it is! Please post your makes I would love to see them! P.S. Make sure you put the helmet on first or you won't be able to glue and assemble it!
This pogo-pin clip is designed to facilitate the reprogramming of the Sonoff S31 module without the need for soldering to the pads on the circuit board. The pogo-pins I used are 0.68 mm in diameter and 16 mm in length. The holes needed to…
I made the clips in August, 2021. The pogo pins I used is P050-Q1 and its socket is R50-2s. I soldered the pogo pins to the pcb I designed before in order to keep the pins in place, same height and 1.27mm pitch. It is also because it is…
This model is split into two pieces for easier printing. After printing, the small back piece should be glued into the recess. The finished grip is held in place with a M3x8 screw.
My wife and I needed quick easy costumes for a Halloween party so we decided on Flo from Progressive and Jake from State Farm . Needed name tags so I whipped these up. They should print the proper size, then just add some velcro or glue a…
This is a upgrade for the case slider on the Lee 6000 (Six Pack) Progressive Reloading Press. It improved the reliability of grabbing a case and inserting it into the shell holder and prevents/greatly reduces kinking the case feed spring.…
Remix of the Bearing based spirographic WDT by Kensei @Kensei_237841. Also used some modifications made by @ungodly and @Kampflafer, so it has no handles and has fixed positions for the external needle. I have splitted the lower body in…
A re-creation of a fun reddit post I stumbled upon. Apparently there's even a git repository about this joke. Print this out and hang it up in your office by the programmers! They'll get it. As always, the Fusion 360 file is included. So…
Massachusetts, USA (MA) Topographic Relief Map with Rivers and Coastal Waters Massachusetts, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
This model is a DIY dock for the Lenovo Smart Clock 2. It allows access to the USB interface on the bottom of the dock for connecting to a computer to access and program the smart clock, e.g. accessing it as a MTP device or to connect via…
Unleash your creativity with this custom-designed spirograph 3D model! Inspired by the classic spirograph toys, this model allows you to create intricate and beautiful geometric patterns effortlessly. Whether you're a hobbyist, artist, or…
i try make model of extruder housing for my printer, because original was damaged with unclog tool. THIS MODEL IS UNTESTED, so if anyone send me feedback, i will be glad for that. original back plate should be fit to this. Update…
Parts: Water reservoir Sprouting tray Weighing plate Lid Divider I'd recommend to use PETG for at least the reservoir to make it watertight. For slicing the sprouting tray you have to use PrusaSlicer, because the grid at the bottom is…
This package includes all of the files & documentation to build one of these yourself. The clock is a very beginner friendly project and the progress bar is a bit more advanced. Instructional drawings are provided as well as wiring…
I love this model but using the handle sometimes ended up lifting the wdt off the portafilter. Remove the handle and add some grip to the spin part giving more control over it. This remix is for the 54mm portafilter. Update 5/30/23 added…
This is a simple spirograph print, very fun for kids and adults alike. To use, place a small gear inside the big ring gear, take a pen and trace in circles!
A complete model of a spirograph with various circles for geometric figures The set consists of: handle wheels with 11 teeth wheels with 14 teeth wheels with 18 teeth wheels with 19 teeth
This is a remix of Kensei @Kensei_237841 's excellent version of the Weber Workshops Moonraker WDT tool. It looks and feels the closest to the real thing. Turns very smooth because of the bearings and also adds heft, which makes it feel…
OPK is a spherical top keycap profile developed in CadQuery, it's customizable and open source. Please note that the included models are just few examples of what can be actually done with OPK! OPK is a library you can use to create your…
Unleash your creativity with this 3D printable Spirograph model. Create intricate and mesmerizing geometric designs effortlessly. Perfect for art and math enthusiasts alike.
This is a remix of @muehles_822209 spirographic WDT Tool. This is for 54mm portafilters. NOTE: I just played around with the sizing of the original files to fit the 54mm portafilter. I have NOT TESTED THIS YET as I am still waiting on the…
Alternative parts for Umikot - Planetary Gear Spirograph Espresso WDT Tool These are versions of the lug-flanged base files with cutouts for three lugs. This is for compatibility with the Breville Barista Max's portafilter. See the…
Un support pour 2 aérographes fixable sur le plan de travail par vis ou en le collant. PLA Couche 0,2 Remplissage 15% 3 périmètres si vous voulez le fixer par vis Nécessite des supports pour la pièce supérieure. N'oubliez pas de mettre un…
![[NEW MODEL IN PROGRESS] Mini Federal Signal Thunderbolt (Functional) [NEW MODEL IN PROGRESS]](https://media.printables.com/media/prints/ec0ac4b5-cb04-4fee-9875-f961f9ef126a/images/12745673_affa9b69-e625-4314-b564-a7ad6a6e6af9_857d78fc-04a8-4837-94bd-40ae7cfbabba/screenshot-2026-04-22-230545.png)
![[WORK IN PROGRESS] Mini Brake Stand / Mini Brembo Z18 for Mini Wheels](https://media.printables.com/media/prints/371322/images/3128148_7a32e244-fb8e-485a-aa52-3109f892af8f/bremsooooo.jpg)
