Counting matching models…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Cup holder for mid 2000s Toyota Corolla (E120), My friends car didn't come with cup holders, so designed this to fit in the centre console, it has a weird cubby with lid next to the handbrake where you would think they would put cup…
Toyota Corolla AE86 Trueno, famous from Initial D Print the car and 4 wheels, might need supports for the exhaust tip Original model from sketchfab: https://skfb.ly/o8CNI Check out my print-in-place optimized version of an AE86:…
Air Went Blade Replacement Part I have a 2005 Toyota Corolla in which the previous owner used to attach his phone onto the AC air went blades and sucessfully broke two of them. I didn't find the blades selling anywhere and replacing the…
Heyho I built a finger skateboard some time ago and I'm still super happy with it myself :) The first parts I printed back then are still alive and working like the first day. But some people had problems with the pressfit during…
This rollator was created for a daycare project. Based on the original rollator file, I designed and printed a new, printable version. The wheels can be turned. I printed the left side frame and the right side frame in ABS. The small…
Nach gut 20 Jahren sind mehrere der Einlauftrichter meiner Rolladen gebrochen, da das Plastik langsam porös wurde. Da ich den Hersteller und das Modell nicht mehr herrausfinden kann, habe ich das Teil kurzerhand selbst Modelliert. Das…
View full build process and most other info can be found on my TikTok @yorkenshire As of Ruin and HW2 this model is outdated, may remake in the future with improvements + more attachments. Help Wanted model reworked to be controlled with…
LED light mount for Flashforge Adventurer 5X (AD5X) 3D printer enclosure. The Flashforge Adventurer 5X is a great printer, but the lack of internal lighting in the enclosure makes it difficult to monitor prints. The official LED module…
This is a reverse engineered demo for display at Bay Area Maker Faire. It explains the inner workings of a controllable pitch propeller. Ideally the hub should be transparent but I don't have the equipment. All threads are metric: holes…
A/C Vent Louvre Tab - Toyota Corolla 2016 Print with tabs facing up with tree supports if possible
Step back in time with this Motorolla Dynatac 8000X cell phone! This is a remix of zodlyrob files from Thingiverse thats linked below. I added some more detail including the massive antenna! The “SND” key is separted from the main body to…
[IMPORTANT] In OrcaSlicer i got best results by enabling Others→Slicing Mode→Close Holes Im making this model available for 3D printing. Not tried to print yet bc lack of fillament, i would apreciate any suggestions to get better results.…
Enrollador pasta de dientes sencillo y portable
Pretty accurate 1:29 scale model of a 10 Yard rollaway dumpster I rented when replacing the roof on my house. Recommend resin printing.
This is a 1/48 scale print-in-place high quality model of an AE86 Toyota Corolla, commonly known from the anime Initial D The wheels and axles are separate from the rest of the car, allowing it to print in one piece and let the wheels…
Feb 17 2025 update :- An error with the button assembly was brought to my attention today. There was no hole where there should have been one on one of the button tops. I've done a quick fix and re uploaded with the new button replacing…
Toyota Lexus Screw Cover for Yaris, Auris, Corolla, Rav4 and other models I recommend black material, printed in 100% infill and support only under the long pin.
A friend of mine owns a Toyota Corolla hybrid and was always complaining about the armrest box. (too deep and messy) I designed these three box well shaped according to the non regular shape of the armest box. i suggest to print them in…
Mit diesen Adapter Teilen und dem Jarolift 230v Motor kann mann jeden Velux Rollladen umbauen. Umgebaut habe ich bei mir das Velux SK06 und FK06, diese betreibe ich nun mit einem herkömmlichen Rolladenschalter und mit einem Shelly 2.5…
Concepto del diseño El Toyota Corolla 2010 es un modelo icónico y práctico pensado para entusiastas de los coches y coleccionistas en miniatura. Este modelo 3D refleja la atención al detalle y la calidad conocidos de la marca Toyota. Uso…
Toyota Corolla AE86 Wireframe Wall Art – 3D Printable Model Unleash the classic charm of the Toyota Corolla AE86 right onto your wall with our intricately designed 3D printable wireframe wall art. This model captures the iconic lines and…
Rolladenstopper mit eingedruckter M5-Mutter Eine M5-Mutter wird benötigt und eine M5-Senkkopf-Schraube (z.B. vom defekten Stopper). Bei der Generierung des GCodes mit PrusaControl habe ich bei 8.2mm einen Filamentwechsel eingefügt. Wenn…
A fuse box cover with extended height for covering fuse taps. It has storage for spare LP mini fuses. Simply print it and snap it onto your fuse box! No prep or sanding needed. The cover features a bendable latch (compliant mechanism)…
Este tablero de ajedrez se enrolla para permitir almacenar las piezas y facilitar su transporte. Es ideal para viajes, excursiones, etc. Debes imprimir 32 piezas de un color y 32 del otro. Cada pieza debe unirse a la siguiente con un…
Rollos (Rolladen) mit Lamellen benötgen manchmal eine Führung, in meinem Fall zerbröselten die 20 Jahre alten Kunststoffteile, das Rollo lief dann nicht mehr richtig. Den Hersteller gibt es nicht mehr. Also zeichnete ich es neu. Meine…
Air vent shims designed specifically for a 2005 Corolla, but should work with other 2003-2008 Corolla models. To install, pull up on the vents then outwards until they come out, then slot into the recess on the side of the air vent. After…
I have invented a pair of adapters to be added to the sides of a NEXUS Rollator/Walker to permit the attachment of anything built with the “dovetail style” mounting. I have included a Cup Holder, a Shopping Bag Hook, a Carabiner Loop, and…
Cover for the shutters! A friend ask if i can print his a new cover for his shutters. So here it is. My recommended settings: Filament: PLA Layer height: 0.2 Infill: 50 % No supports needed Enjoy and have fun!
Made a storage separator for my corolla to make room for glasses, coins, hand sanitizer and mints. Has extra room for cards and pens (pointing up) and general room. Probably works for 2018-2023 Toyota Corolla Hatchbacks or 2019-2023…
This dash organizer fits a 2024 Toyota Corolla behind the screen in the dash. I printed mine with these settings: Layer height: .3mm Infill: 10% Supports: None You'll likely need a heat resistant plastic if the inside of your car gets…
The original model of the switch, even after printing with a 0.25 nozzle, in my case, gave a lot of resistance... It was very difficult and even painful to switch it... So I modeled it with minor changes so that the operation of the…
A blank grille emblem, made to fit a 2004 Toyota Corolla. It may fit similar models like 2002. There are optional zip tie holes for retention. It's WEAK! Print in a ductile material like PLA+ or PETG or ABS (plain PLA will break…
Spare wheel mounting plate part for the Toyota Corolla Cross Hybrid Spare Tire Mount Upgrade kit . You can raise or lower the height of the top of the model to better fit your spare tire height. The spare tire height will determine the…
this model is thinked to be printed in parts. this need 3 bolts and screws or it can be glued.
Ein Flaschenhalter für einen Rollator mit einem Rahmendurchmesser von 22mm und einem Flachendurchmesser von max. 72mm Übliche 0,5l Flaschen passen optimal hinein. Die Haltelaschen halten den Flaschenhalter schon sehr gut an Ort und…
Snug-fitting cup and phone holder liners designed specifically for a 2005 Corolla, but should work with other 2003-2008 Corolla models. I am aware the top rounded corners of the phone holder liner doesn't quite match the car's corner…
Concepto del diseño El Toyota Corolla 2007 es un modelo icónico y práctico pensado para entusiastas de los coches y coleccionistas en miniatura. Este modelo 3D refleja la atención al detalle y la calidad conocidos de la marca Toyota. Uso…
So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…
The cabinets with rolling shutters are much LARGER than other MT-SYSTEM cabinets, boxes and trays and consist of ONE big compartment to take care of your stuff. Perfect for almost any possible kinds of use like… workshop and garage…
2020 Toyota Corolla 1L Water Bottle Holder. For use with a 1L Camelbak Bottle. Print instructions Category: Food & Drink Summary 2020 Toyota Corolla 1L Water Bottle Holder. For use with a 1L Camelbak Bottle.
This is a lovely printable representation of one of my most favorite cars, the Corolla Touring from Japan, with absolutely amazing detail, and a lovely design, this model is a great way to represent the car.
Rollladen Einlauftrichter Hersteller ist unbekannt. Einziger Vermerk auf dem Teil: "17-25 R". Anhand des Fotos der Führungsschiene kann überprüft werden ob die Füße passen. Unknown manufacturer. Only notation on the part: "17-25 R". The…
this is a 3D print replacement for 79-83 TOYOTA Hilux (RN30, LN40) and Corolla (E70, KE70, TE71, TE72) grill lock clip on these old Japanese cars, this item often overlooked, it's commonly gone or broke and just replaced by zip-ties or…
Extension for rather small hooks in the trunk of Toyota Corolla TS XII (E210). - version 02 (better fit, more robust). Printing from PETG (or something more durable) recomended. Inspired by https://www.thingiverse.com/thing:5444285
Generalmente los enrollacables se diseñan para cables finos. En este caso he diseñado un modelo para cables gruesos. Es un diseño muy sencillo, con dos variantes . Cable reels are generally designed for thin cables. In this case I have…
My friend has a 2012 Toyota Corolla, and his Keyfob exploded. He reached out, and a short time later, I found a model on Thingiverse. I printed it but disliked how we couldn't find actual hardware or how some of the tolerances weren't the…
The Toyota Corolla E150 has a deep storage container.
Sirve para enrollar, exprimir y mantener ordenada su pasta dental. Le da un toque unico a su baño.
A hanging organizer tray to store glasses, short USB-A/USB-C dongles, a pen and larger items for the E210/2019+ Corolla center storage compartment. The maximum length of a USB dongle that will fit is 32mm (not including the male end…
Raise the cargo floor of your Toyota Corolla Cross Hybrid (CCH) AWD to be level the folded rear seats with this cargo riser that compliments the spare tire upgrade . Print in PETG or another non brittle, high temp material using the…
Rolladen Endstabgleiter/Rolladenstopper/Endkappe als Ersatzteil, da diese nach einiger Zeit porös werden und brechen. Window shade end bar gliders/end caps as a spare part, as these become porous and break after some time.
simple replacement part FreeCAD design file available if you want to adjust the model.
Ein Nachbar hat mich gebeten, einen gebrochenen Einlauftrichter zu drucken. Die Firma, die diese hergestellt hat, gibt es nicht mehr. Da ich kein passendes Modell fand, habe ich eines konstruiert. Maße: Breite: 42,5 mm Höhe: 48 mm Tiefe:…
The two versions are the 3GearBase and 5GearBase, both use 1 ControlGear and 1 PlateGear. The 3GearBase uses 1 MiddleGear. The 5GearBase uses 3 MiddleGears. If you don’t want to use the TopPlate then use PlateGearWithoutTop. The original…
Print with Inland ASA or FlashForge ASA for best fitment/results. Print with textured plate. Sliced in Bambu Slicer, printed on a Bambu X1C. FAIR WARNING: If use a different material (PETG, PLA etc.) or brand (Overture, Polymaker etc),…
My SO's 2015 Toyota Corolla didn't have any indicators for the trunk and gas levers so I created these quick slide on indicators for them. Printed with Hatchbox Green PLA at 0.2mm layer height, probably should have used PETG instead due…
A cover broke and I have rebuilt the part. There is a model with offset holes for the screws and one with parallel holes. --- Eine Abdeckung ist gebrochen und ich habe das Teil nachgebaut. Es gibt ein Modell mit versetzten Löchern für die…
Print with ASA, any brand should work. Print with textured plate. Sliced using Bambu Slicer. Printed on an X1C.
Based on the incredible nice looking Jack O Lantern I remixed a version that changes the 3 original LED's for a fully wifi controllable battery powered version with WS2812 LED's. The led's change brightness/are flickering like a candle…
Abdeckung für Rolladen-Gurtwickler. Innen-Maße: Höhe vorne 127,5mm, hinten 133,5mm Breite vorne 45,5mm, hinten 51mm Die Außenmaße sind wegen der Materialstärke dementsprechend größer Gurt-Loch-Maße: Höhe 20mm Breite 30mm Abstand…
Bobina para enrollar cable de impresora. Compuesto de tres piezas imprimibles y un tornillo de montaje.
pause at layer top 4.2 for dual colors layer height: 0.2mm i used Polymaker black and Overture white on my Ender3
Client of mine was installing Morel Virtus 603 speakers on his GR Corolla, but the CDM-600 midrange was pretty large, the generic adapter was too small for it. So I designed and printed my own. Printed with 100% infill and 3 perimeters in…
I bought a torque insert to stiffen up engine movement for my GR Corolla. I decided to model it before install since the shape didn't look too complicated. Test print was done with PETG using a 0.8mm nozzle and was cancelled midway…
Piece of plastic to lift your cup. The thickness of the original part is 20mm but it is not enough because the cup drops so low. many people asked me to redesign the part and increase its thickness to 40mm. The bottom Diameter is 68 mm…
This part sits in the side of the lowest segment of aluminum shutters and guides the shutter inside the rail so it runs straight. Dimensions might vary, so you might have to adjust. Print in PETG or ASA and the like for UV and Heat…
The lower part of the cup space is very narrow, by raising it, a wider cup can be accommodated and another hidden storage space is created under it.
Low space for storage near the driver seat, hard to reach and poor quality Qi charger (especially when phone has a lens that protrudes highly) and no refrigerated storage compartment available inside vehicle gave me an idea for design. I…
Modified original to only 1 cup holder, plus small trinket tray.
Full disclaimer: you will need to cut up your glove box a little bit to accomodate the larger dingus, and to drill/screw into it. Just one screw though (typical black drywall screw fits perfect). I designed this thing because I broke the…
A little box shaped as the motor plastic cover of the Toyota Corolla Zre152R and other models/ If you enjoy this project, please consider following me and joining my supporter tier to help keep my free models coming! Be sure to explore…
Zum Aufstecken auf die Rolladenführungsschiene. Passend für Illerplastic (und bestimmt auch andere), Profil siehe Bilder - Wenn es auf dein Profil auch passt bitte kommentieren von welchem Hersteller deine Profile sind. Einfach mit Cura…
USE NEW V2 FILES First version had split lower part for faster/easier reprint in case of broken part (again) but it turned out it is also super weak point of whole part at the same time. New V2 version has lower part as one piece and…
Fits 1998-2001 Corolla (8th Gen) Washer Fluid bottle. Has tabs on each side to make pulling off easier. I printed this in ABS and used acetone to "glue" the symbol on.
Same model should fit both front cupholders. I know it fits the 2024 Corolla Cross, and probably other years but haven't been able to make sure. Just a simple tray to keep the bottom of the cupholders from getting sticky or full of…
Para que tus cables no estén por ahí desenrollados, con mi diseño los tendrás organizados y muy importante sin retorcer o forzar. La parte central se puede usar además de para enganchar los extremos, para enrollar otro cable más pequeño o…
Nachdem meine Rollladenstopper nach 20 Jahren spröde wurden und ich die Original-Ersatzteile nicht mehr bekommen konnte, druckte ich Neue nach den Originalmaßen. Der Stopper hat ein M5-Innengewinde und eine Unterlegscheibe für die…
Fuel door cover print for 2001 Toyota Corolla. Original hinge was rusted off and this print snaps in place. Printed in PETG (Works in +30C). Prints vertically, requires supports and brim. *Does not latch or lock in place, just works as a…
You can print it all using some FLEX/TPU filament at 0.2 but I did a version using FLEX for base and PET for the buttons. Doing a extruder change on layer at 1.00 mm and with 0.1 layers. If the base is too thick you can feel too hard to…
The Spiral Lamp: The spiral lamp is a cost-effective, easy-to-build, fully addressable LED lamp and can be easily controlled and programmed via an app or browser. Required Parts: Name AliExpress ESP32 SuperMini 2,89€ [ Link ] (ESP32 C3…
These cat ears are an impractical fashion accessory for the eccentric puppeteers in the world. Control is made through pulling strings on the front (for forward) and back (for up). In case anyone likes the shape but doesn't want to…
Piezas para aprovechar los huecos de las bebidas de un Toyota Corolla TS del 2024, consta de dos huecos (vasos) para almacenamiento, caja central para ambientador o almacenaje que funciona a presión y se queda fijo en la tapa, la tapa…
"Normale" Rolladenblende die aus dem Baumarkt (ABS) werden schnell gelb und spröde. Gibt es auch nur in "weiß"
Resistente Fácil de desplazar Con gran capacidad de cuerda Con agarres para la cuerda muy resistentes Fácil descarga con soportes.
Note: I do not own a GRC, made this for a friend that owns a GRC. They confirmed the fit to work in their shifter set up.
Replacement shutter doors with MAKERTEAM LOGO. Made for the MT-SYSTEM cabinets with rolling shutters. RELEASED MT-SYSTEM COMPONENTS All up to now released MT-SYSTEM components are part of a special collection like… MT-SYSTEM Cabinets with…
The filament dry box by werner_rh uses a rolladapter that tightly fits into the spool and takes a 10mm aluminium rod as axis. Those rolladapters are made for many separate diameters. If you use filament by multiple manufactures, you will…
HomeKit controllable LED light #1. Really simple to print and to setup. =) This lamp can be directly added to Apple HomeKit and controlled then via Siri and the Apple HomeKit app too. You do not need an additional bridge so it will be…
I completely redesigned the supports to make the tube hold the load and not the zip straps. This project is a two-piece tubular holder for a cane or umbrella. It is fastened to the side of a NEXUS 4-wheel walker/rollator. The tube has…
Corolla E12 (or might fit some other Toyotas) clip, which in my case replaced coin holder which was useless for me. Category: Automotive
Printed and Tested on 2011 Toyota Corolla. Most likely fits many different Toyota Models, but not verified.
Remixed the cane cup from zumili's excellent Walking Stick Rollator Mount so that it only requires one piece be printed and only needs a long zip-tie to mount. May be useful if, like me, the correct sized metal pieces for his model are…
The cup holders in the 2024 Corolla Cross do not fit the wide-bottom (91mm) Hydro Flask. This is an adapter that fits in the cup holder. Note that some models of Corolla Cross (2022, for example) have a different style of cup holder.…
Habe die Lamelle für ein kleines Rolltor für den Modellbau verwendet. Gedruckt aus PETG
Besucht gerne meine Profile auf Makerworld und Thingiverse :) Tommsen | Startseite - MakerWorld Designs - Thingiverse Für meine alten Rolläden in der Wohnung waren manche Bandaufnehmer oben abgebrochen oder sogar abgerissen. Ich habe mir…
Modeled this up for a co-worker for his 96 corolla. All the mounts et al broke off from being brittle with age. Might work on year models 93-97, this is without tilt-wheel.
