Counting matching models…
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
Reusable clips without damaging the GT2/2GT (width: 6mm) timing belts. (Although these are designed for the KP3S, they could be used for other applications as well.) Updated [ September 1, 2022 ] ────────── A shorter clip has been added.…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Dual output fan duct intended for the original KINGROON KP3S V5/MK8 hotend. I have redesigned the model changing the shape and output angle and seems to provide more output. Water test of my remix (100% speed original fan) Water test of…
Also available on GitHub How to use Download the latest 'KingroonX.X.X.zip' file. Extract the ZIP and move the 'Kingroon.idx' & 'Kingroon.ini' files and the 'Kingroon' folder to: \Prusa3D\PrusaSlicer\resources\profiles * 'Kingroon' should…
Rename all configs from .ini to .cfg ← Configs Rename Robin_nano.ini to Robin_nano.bin ← firmware Check the ReadMe.txt for more info Category: 3D Printers Comes from: https://github.com/nehilo/Klipper_KP3S
Fan duct upgrade for kingroon kp3s Titan head. Previous one was melt in a day, so I remixed it. Print with ABS with 100% infill and use tree supports! (Screw holes must be bottom when printing) +I added duct for e3d V6 nozzles
Kingroon KP3S - Z axis Linear Rails: This is a upgrade for kingroon Z axis, with this upgrade you have a best result on Z axis and you can increase the Z-height of your printer to 225mm. In the attached documents you will find a pdf with…
Print settings: KP3S V6 Heatsink Cooler.stl - NEEDS SUPPORTS 5015 Fan Holder.stl - NO SUPPORTS KP3S Nozzle 5015 Duct.stl - NO SUPPORTS (print slower - high overhangs) You need to print 3 files for the complete assembly. Variations below.…
Y Belt Tensioner for Kingroon Kp3s This is a belt tensioner design for kingroon Kp3s, it is easy to assembly. Este es un nuevo diseño de tensor para el eje Y de la kingroon Kp3s, muy fácil de montar Other mods for Kingroon KP3s You can…
A maintenance pillar to support KP3S body placed sideways. It is placed under the aluminum profile of the Z-axis and is used for opening the bottom panel, etc. Sizes Height ─ 170mm + 4mm (protrusion at the top) Width x Depth ─ 20 x 20mm…
The main model here is a reverse bowden and cable support bracket, which is needed to make the KP5L capable of printing reliably. The printer as-shipped makes no accommodation for the filament path between the runout sensor and extruder,…
This 5015 fan shroud is part of print head ASSY for Kingroon KP3S. See the “ KP3S — Modular 4010/5015 Fan Shrouds with BLTouch Mount — Kingroon ” page for more information. ────────── Update [ July 30, 2023 ] In addition to the…
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
Tired of having the damn pen wandering around the lab lost among the tools or stuck to some frame panel so that it makes a terrible noise when the printer vibrates? This is a simple and functional design of a pen holder for the touch…
3D Touch BLTouch Mount Kingroon KP3S 3.0 Direct Drive FreeCAD Source Files Included I tired this mount by benjibigbro, but it was too low [ https://www.thingiverse.com/thing:4816601 ] Thank you benjibigbro for your awesome design. I…
This is another version of my favorite spool holder design modified to work with the Kingroon KP3S Pro and the KP3S Pro S1. Can be printed within a 180x180x180 print volume STL and Step included if someone is interested in remixing to…
Kingroon KP3S - Compact, Slim and Quiet Power Supply Attached you can find all you need to assembly the Slim, Compact and Quiet Power Supply on your Kp3s. You will never have a separate power supply on your kp3s again. Adjunto puede…
Allgemeines Remix des bekannten “Top Mount spoolholder” für den Kingroon KP3s. Meine Version beinhaltet 3 wesentliche Änderungen: der Halter wird fest am Drucker verschraubt (benötigt 2stk M5x20 Innensechskantschrauben) der Haltearm wird…
We searched for 3D CAD data that could be used for KP3S design, but I couldn't find it, so I measured and modeled it by myself and share it. Notice: I think there are some wrong dimensions part because it's modeled by hand measuring, not…
Basically a wider original duct with a vent attach to the back. It can just replace OEM part without modifying housing. Recommend to print at 0.15mm layer hight. Use only one screw to bolt on original spot. No Support Needed This desigh…
Double nut knob for bed leveling screw of Kingroon KP3S. The leveling screw with a spring in stock condition is wobbly and prevents accurate leveling. By replacing the spring with an M4 nut and this knob , the screw can be fixed with a…
A new spool holder design which allows you to lower the filament spool mount point by 10cm ensuring correct sliding of the filament with less friction. This version has a wider hook so it is possible to insert reels of a wider thickness…
This is a top spool holder for Kingroon KP3S Pro S1. (Mine is from Sliceworx.) So far it has been working great for me. The arm is a remix of Low hight spool-holder v23 for Kingroon KP3S, Aquila & Ender3 So that the roller of the Filler -…
The work on the project is still in progress , for any doubts feel free to leave a comment or contact me on the Kingroon community group (user Glitch08). The goals are: -Modular design, easy to print without support and customizable. (you…
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
Adapter for a commercial aluminum tensioner for X-axis Other mods for Kingroon KP3s You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to danate Bill of materials: 1 unit - Aluminum belt…
To install this blowing option, you need to print out the modified vent holder housing. The distance from the bottom of the blowhole to the table should be about 3 mm. Fanduct only for kingroon kp3s - e3dv6 hotend titan extruder
Kingroon KP3S Pro V2 bed cable may be stuck into the stepper motor holder. With this solution I don't have to worry about this problem anymore. Explained in the video too from 6:42. Printed from black PLA without supports. For assembling…
My version of a top mount filament holder for the Kingroon Kp3s. It balances the spool perfectly over the post while leaving one side open to change spools one handed. Can be rotated to whatever feed angle you want to align better with…
This is a Remix of the Aurora handle and spool holder for Kingroon KP3S Pro and S1. This version can mount spools of maximum 85cm depth, and can be mounted to have the spool both on top of the printer and left-rear side to use the…
My KP3S Pro V2 didn't fit with other designs, so I remixed it and reduced the height from the one by Mr. Baham https://www.printables.com/model/499596-kp3s-pro-v2-fanshroud And used in my review video:
SliceWorx design top handle for Kingroon KP3 Pro and S1 Use M5*25 hex cap head or button head screws for mounting this to any printer that has a 2040 extrusion vertical beam. Print settings: Orientation: Any flat side Layer : 0.16 mm…
I do not own a Kingroon KLP1 by myself but a friend does. As he had issues with his filament sensor on the KLP1 and wanted to be able to connect his Drybox directly to the printer if needed, we designed this upgrade. There are several…
This is a replacement for the Z axis stabilizer on Kingroon's KP3S pro V2, designed to remove the spool holder from the structure, to keep the external size the same as the KP3S pro (v1). See the assembly on the video below.…
30mm riser for the top plate of the Kingroon KLP1. The screws to mount the riser to the frame are hidden inside, a ball head hex driver is needed. STEP files included, feel free to remix edit: added FreeCAD file edit: added 230 version…
🇨🇲 Welcome to Cameroon! / Bienvenue au Cameroun! This model was designed by Artemio García. Cameroon's Reunification Monument was constructed in the 1970s to memorialize the post-colonial merging of British and French Cameroon. Located in…
holder 1 and holder 2 is table, that used rails of stock kit for thin spool and it is foundation of holder 3 for holding spool anything width. mod2 folder include parts for narrower spool filaments.
Direct Drive Orbiter v2.0 + V6 Attached you can find the assembly instructions and Marlin 2.1.1 firmware for this mod. This firmware is for F103 and F303 chip. If you have the last version of Kingroon, you need compiled the firmware for…
Kingroon KLP1 Head model + Fan blower for 5015 fan replacement
Kingroon KP3s Pro V2 - Fan duct Fantastic fan duct for kingroon kp3s Pro V2, inprove your layer fan and increase nozzle visibility FanDuct_v2.stl , this version is for extruder version V2 FanDuct_v3.stl , this version is for the newest…
Note : it does not work on the 230mm version. See the commentary section. 10/03/2025 : v8 raised version got an airflow improvement after beeing water tested v9 same airflow for non raised model. 03/05/2024 : v7 add a raised version, 7mm,…
Originally found HomeGrown3D's Ender 3 version while looking for new knobs for the KP3S and thought the locks were very clever (will be adding to my Ender very soon). Posting monsieurglad's files here simply for convenience as I am…
BOM: 608ZZ ball bearing x1 M3 * 20mm screws x2 M3 nuts x2 M3 washers x2 (optional) Full details found here on construction and how to actually correct z-axis found here: https://www.thingiverse.com/thing:4748680 Make sure you properly…
Well just a 30mm spacer for the top (print 4) and some caps for the M3 hardware uses 20x M3x40 hex screw. And the feet , print in TPU (print 4)
Updated version 2. Updated the left mounting holes, Made the shell thicker (to 2mm). All categorized in maps KP3S Shroud Minimal V2: Minimal design for remix/own version purposes. No fillets were applied. The outlines for the 5015 fan are…
This height-adjustable fan duct and mount will work with the latest (titan) version of the Kingroon KP3S to allow you to use either the stock titan extruder or a BMG with a E3D V6, E3D volcano, NF smart, etc hotend. Some additional M3…
A simple mod to raise the top lid. 2 versions available; for brass threaded inserts or self tapping screws. 4.5 mm diameter of holes for threaded inserts, 2.7 mm holes for self tapping. Corners are symmetric. First print 1 long piece and…
After about a month of intensive using my KP3S I discovered that filament dug a hole in the feeder intake wall. Here is my solution for the problem. I couldn't use z-axis top mounted filament holders, because the whole printer setup is…
KP3S is a great 3D printer, but needs a safety upgrade on heatbed cable, this is 3D printed strain relief for KP3S. It uses existing holes to be fixed with M3x16 bolts and nuts. Additionally, two zip-ties are needed with thickness smaller…
Base para la fuente de alimentación de la impresora 3D junto con espacio para dos versiones de Mosfet y un pequeño cajón de herramientas habitualmente utilizadas para nuestras impresoras 3D.
The KLP1 I bought has seems to have different parts with the KLP1 that were already here and all the fan ducts don't fit so I made one. This is for the KLP1 with 230x230mm bed with the upgraded and much larger printer head. Printed mine…
Soporte de Filamento para la impresora Kingroon KP3S PRO, se invirtio el modelo original de https://cults3d.com/es/usuarios/Arts3Dlab para que la bobina quede a la izquierda, no requiere soporte para su impresión, el modelo fue impreso en…
bltouch mount for kingroon kp3s original head(for e3d v5) mount with m3 screws
Cable guide for stock kp3s/kp3s pro head. Prevent cable from damaging. Fits perfectly.
Bought my first 3d printer, lovin it. but the lights leaking from the knob hole hurts my eyes. So i decided to make something to block it's light. As you can see on the photo, the raft on the center was not intended. But it fits nicely,…
Basis meines Modells ist ein Modell von Squirrelbrain von Thingiverse ( Link ). Die Einzelteile zur Befestigung des Netzteils entfallen bei mir. Die 8 Gehäuse-Teile werden mittels Einschmelzmuttern, DIN912-M3-Schrauben und den “Stegen”…
One of our members kindly sent us 2 Kingroon KP3S Pro V2 3D printer so we could take precise measurements and create a full CAD model. This will help us design and adapt new toolheads and upgrades specifically for this machine. We’re…
The KLP-1 has an issue where the hotend whip (cable and feed tube) drag on the lid of the printer. Also, the lid doesn't have a backstop, which is mildly annoying. There are some designs already out there to elevate the entire top of the…
The design uses two 5015 fans with two fan ducts, one at the front and one on the left side. [THIS IS NOT NEEDED, THE FAN FITS ON THE LEFT SIDE FINE] To make space for the left side fan duct the 3010 heatbreak fan has to be rotated to the…
On the KLP1 you have to always disassemble the hotend to reach the screws that keep the belt in place in case you want to change belts or tighten it more. This is really annoying and honestly just a bad design. So i made a belt tensioner…
kingroon spool organizer M3 flat head Screw * 6EA M3 drill bit
This is remix of these two holders: https://www.thingiverse.com/thing:5884524 https://www.thingiverse.com/thing:6082540
Stylish part cooling fan cover for the Kingroon KP3S printer, quick and easy to fit using the original bolts and allows good airflow as-well as shielding the fan from dust etc… Can be printed in standard quality on a 0.4mm nozzle, 100%…
This time there is no puny thin walls, too steep overhangs and friction fitting. Overall design is inspired by nehiLo's KP3S mount and select few(heights and fillets for screen cover) measurements are taken from there, shape of screen box…
I wanted something simple to tighten the x-belt. Keep in mind, this is a very tight fit. You might need to play around to make it fit. I printed it using PLA with so many walls, that its actually a 100% infill. The screw hole is 3.8mm in…
The PTFE tube on the KLP1 is not held in place and is not fun to load or unload filament. This mod takes 2 2.5mm zip ties to hold the output of the FRS and a 22mm PTFE tube on the load side of the FRS. The PTFE lines up with the in/out of…
I needed an easy way to cover up screw terminals I used to mount sealing lighting. So I designed these to fit different sizes of what we call in the Netherlands "Kroonsteentjes" what is "Luster screws" in English as far I can find. They…
This is a simple mount to attach a BL-rouch to the new Kingroon E3DY extruder.…
For Halloween 2018 I put together a Monster Maroon Jacket from Star Trek The Wrath of Khan. Here are the accessories I modeled just for this jacket: Pip Pins (2 kinds) Working Jacket Clasps (4 part assembly), Captain Rank Belt Buckle Back…
Hotend para la impresora Kingroon KP3S, incluye instrucciones de impresión y montaje
The Kingroon KP3S is capable of very fast printing speeds. For this, however, the filament must no longer be fed from the side, otherwise damage to the extruder will occur at higher speeds. Here is a version for a filament feeder for the…
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
These are customized support feet printed in TPU, they greatly reduce the vibrations of the structure, I recommend re-calibrating the input shaper after installing them because they modify the resonance frequencies The correct orientation…
Fijacion reforzada de cables para cama caliente de Kingroon KP3S 6x Tuerca DIN 934 M3 2x Tornillo inox DIN 7991 M3x16 2x Tornillo inox DIN 7991 M3x12 2x Tornillo inox ISO 7380 M3x8 1x Brida 2.5mm Compatible con posicionador de fleje de…
This is a redesign following my thumb wheel clip for the standard KP3S bed carriage here . The thumb wheel used is neccessarily much larger than standard so that the clip can engage. The wheel was developed from the Fusion 360 file kindly…
tho original model was just a bit to tight for me. It just fit on with a hammer and destroyed my sticker, so I scaled it to 101% so you don’t have to. Top part of printer needs to be dismantled: unscrew the 4 screws on top and one of the…
Some upgrades to Kingroon KP3s. PSU mount at the back of the printer Position of PSU is not increasing footprint of the printer as from the left space is required for the wires anyway. All original PSU venting holes are left open. Switch…
I made this to work in conjunction with @DIYPERSPECTIVE's KP3S 3.0 Fan Mod - It may suit other uses. There are two files, print the one that suits your probe - No need for supports. Offset: Y - 0.0mm X - -28.5mm
Direct Drive DDG + V6 With this new version for kp3s pro can use all the bed surface(210x210), insert nuts version, adxl support, bltouch and inductive sensor. It is compatible with kp3s pro and kp3s pro S1 Attached you can find the…
it's Kingroon KLP1 Extruder part, not for print, just to help you design. I spent almost a day measuring and modeling the klp1 extruder parts. If you need this object to help you adapt the klp1 extruder to your modification, welcome to…
Soporte bobina con encaje para rodamiento de eje Z, evita vibraciones y que se pueda deteriorar al golpearlo por descuido Print Settings Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0,2 Infill: 50 Filament: Smartfil PLA Negro…
Kingroon KP3s Pro - Z Stabilizer Bracket to stabilize and stiffen the Z axis of our Kingroon KP3S Pro and Pro S1. It is a very simple design to print and install. I have removed the two screws from the access cover and the axis remains…
Die Füße sind 40mm hoch, dadurch dreht sich der Lüfter an der Unterseite nicht mehr so hoch und wird dadurch leiser.
MOD's para la impresora Kingroon KP3S
It is not pretty, but it works well. It clips onto the cooling block and is then fastened with screws. I attached a tiny PCB with a 24v to 12v step-down converter to run the silent Noctua fan. Two 24v blower fans do the part cooling. This…
Kingroon Kp3s Pro V2 Extruder cable guide With this design you can fix the extruder wire and you don't need unplug or cut your ties to remove the extruder cap. This model only can use in the extruder version V2 and newest Commercial…
We've designed a holder to fix PSU of Kingroon KP3S to the rear of the 2040 aluminum frame and share it. I heard that the strength of the parts may not be obtained depending on the environment, so I uploaded additional strengthened…
Base fuente de alimentación para la impresora Kingroon KP3S versión Raspberry Pi
magnetic pei sheet alignment tool use on kp3s with silicone springs can be used on another printer To attach it to the printer bed I used 3M double-sided tape
original stl provided with kingroon doesn't fits my printer :( it's just too high and nozzle hits the bed :( so I've modeled simplest possible mount link to onShape project to edit:…
for assembly- 3x 25mm 4mm hex screw 3x 4mm nut
Soporte inclinado para la impresora Kingroon KP3S para montar la TFT de forma horizontal tras actualizar a Marlin. Para el montaje de la caja utilizar tornillos M3x10 con sus tuercas, excepto para el tornillo inferior delantero derecho…
With this new version for kp3s pro can use all the bed surface(210x210), insert nuts version, adxl support, bltouch and inductive sensor. It is compatible with kp3s pro and kp3s pro S1 You can show all information and steps to do the…
already print the original version here https://www.printables.com/model/272114-kingroon-top-mount-filament-holder , but the sloop (insert on aluminum profile) is too loose and wobbles, so I redesign, it and make it bigger, longer and…
Držák 3D touch pro tiskárny kingroon kp3s. Použité šroubky a matice M3. Není nutné sundávat kryt extruderu. Tisk vrstva 0,1 nebo menší. 3 perimetry, materiál Petg. Bez podpory.
Remix of https://www.thingiverse.com/thing:5317324 claw style fan duct for KP3S V3 Universal Adjustable fan mount (https://www.printables.com/model/216066-kp3s-v3-universal-adjustable-fan-mount). The original model after export from the…
Para proteger la pantalla táctil del Kingroon KP3S, diseñé este pequeño protector que se ajusta milimétricamente al marco.
Soporte para tensar la correa GT2 desde el motor Nema17 del eje Y de la impresora Kingroon KP3S
soporte para carrete de filamento, los rodamientos y pin son opcionales
