150 models
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Prints in one part in about 7h large (5.5h small) with 0.6 nozzle, 0.35 layer height and 15% infill. Customize in Prusa Slic3r by choosing different filament colors for layers (see picture) Two sizes are available. One for Prusa MKX and…
Print approx. €7.68–€9.38 excl. taxPreliminary estimate for one variant
If you need a simple to print and easy to fit pipe cover, this might be what you are looking for. The hole is set to fit 15mm pipes. CAD (fusion360) file is included to allow you to customise. Print two to create a single pipe cover - For…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
If you need a simple to print and easy to fit pipe cover and want a parametric CAD file as well, this might be what you are looking for. I have made this CAD design (Fusion360) parametric for easier adjustment, such as hole size - plate…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
CZ: Tuto růžici (krytku) můžete využít např. k baterii ve sprše, u umyvadla apod. Tvar umožňuje snadno změnit výšku krytky dle vašich individuálních potřeb. Doporučuji použití PETG či jiného teplotně odolnějšího filamentu. Tisknout lze…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Prostokątna kratka wentylacyjna z żebrowaniem kierunkowym (louver design). Przeznaczona do montażu w cokołach meblowych (np. pod lodówkę do zabudowy), drzwiach łazienkowych, szafach technicznych oraz obudowach grzejników. Kąt nachylenia…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
eine Simple Heizkörper Rosette 16mm zum ineinander stecken! Danke der zinken Verbindung auch sicher zum montieren. über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
There are three versions 2x3 cm 3x3 cm 3x5 cm the photos are currently with red filament because the white is still being delivered
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
I created the model as a replacement for a cracked original. It's not a 100% exact copy, but it's good enough for me. The printed model in the picture is a test model made of PLA, but due to summer temperatures it might be better to use…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
I've owned the Sirui-VH10 tripod head for a while now, and while it's a good product, I felt that the 'rosettes' (i.e., Hirth joints) were a bit under-used. By default, it is only used to attach the camera handle on one side of the…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
I designed this for my door because the old covers were falling apart. The ones in the picture are printed in Prusament white PETG
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
In my WC there is a 110mm water pipe running through the room (top-down). As a simple optical upgrade, I want to decorate the ends of the water pipe with a deco-pipe-sleeve that can be assembled without changing the water pipe. This is my…
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
Pipe Rosette Low Profile - no supports needed - just print and press the parts together! Pipe dimensions Ø18 mm, Ø22 mm - but I can create other dimensions as well Filament used Filament PM PLA+ SKIN 480C Print settings Layers and…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Pipe decoration escutcheon for 10 mm Pipe Spitted with snaphooks for assembly on existing pipe installation.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
This is a rosette for the heater mounting. Two parts to print.
I broke the original Habo rosette mount - so I designed this replacement part. Print using PLA and 0.4 Nozzle Mounting instructions Do not tighten the screws too hard. If you do not hear a “click” when mounting the rosette, you may have…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
It is a rosette connected with pins for a pipe measuring 33 mm in diameter.
Print approx. €7.46–€9.12 excl. taxPreliminary estimate for one variant
Heat pipe rosette for a 12-13 mm tube.
PL: Jest to mój własny projekt rozety do baterii łazienkowej 3/4 cala. Rozeta jest głebsza od standardowych dzięki czemu można zakryć bardziej wystające koniki. W rozetach jest orginalny gwint który pozwala tak jak w orginale zamocować ją…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for PETGSource material: PET
Fun toy to play with. Hexagon columns jointed together can slide up and down. The model resembles football. The model is printed in one piece. No special settings/Supports required. Infill 5-15%. Layer height 0.2mm or less. Model on…
The design is my own. Its easy to print, with no supports. Support my work You can buy me Coffee Or you can just click like button. Also comment and your photo of your print are welcome. Important The current STL files in the download…
reproduction de rosace gothique deux modèles un petit modèle avec anneau ( pour porte clés , pendentif) Dia 56 mm un grand modèle pour desous de verre etc..Dia 80 mm Gothic rosette reproduction two models a small model ( with key ring ,…
Rosettes to Cover holes in walls, floors or ceilings around heating pipes. The two pieces press fit together around a p
Hier mal meine erstellte Heizkörperrosette. Abmaße können den Bildern entnommen werden.
This is a simple template that can be used for making rosettes out of ribbons or fabric. Depending on how smooth your printer's are you might get snags on lighter fabrics. The print settings I use with this are Layer height: 0.2mm Infill:…
I printed them from PLA+, but you can print them from PETG Print 2 pieces to get a set, there is no need to mirror them. Make sure you print the outer walls first, because of the tight tolerances. Please don't reupload it to other sites,…
A Rosette showing status as an Inquisitor working above and beyond the Imperium of mankind to protect itself from the enemy within, without, and beyond. Check out my collection of props! Plasma Blaster -…
Rosette for pipe with a diameter of 16mm. I printed it with the visible part down without supports. I put the supports just under the pins for connection. Video: https://youtube.com/shorts/CA6v1yBhQjI?si=PzMssdViTufjmICR Thank you for…
An Inquisitorial Rosette such as worn by the holy ordos. I include a split model for easier printing. Category: Costume
These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…
Print the two parts (rosette and shell) separately, and glue them together. Put two screws in the ceiling and mount the shell by twisting it in place. I printed mine in white PLA, with 0.20mm layer height for the rosette and 0.28mm for…
Nachdem unsere Heizkörperrosetten brüchig wurden und sich buchstäblich aufgelöst haben, mussten neue her. -- After our radiator rosettes became brittle and literally disintegrated, new ones were needed. -- Benötigt werden : Insert…
A simple prop inspired by an item I saw online. A solid, one-sided as well as a two-sided version are available. The dimensions are 36×63×9 mm (one-sided) or 36×63×14 mm (two-sided). The models should scale up quite well.
Dies ist eine symetrische Doppel Heizungsrohr Abdeckung für den Boden. 2x ausdrucken und kann dann ineinander gesteckt werden. Deckt unschöne Löcher oder ausgefranste Teppiche um das Heizungsrohr am Boden ab.
Bmw E30\E28\E21 - sun roof handle "rosette". OEM: 54 12 1 867 887 Almost same with the original part. Almost. Perfectly fits onto original "rosette" place. Fusion360 source-file (*.f3d) attached. Category: Automotive
Rosette mounts & clamps are commonly used with camera rigs. Their advantage is that they can be easily loosened, rotated and re-clamped again. Their disadvantage can be their weight, since they are generally designed for heavy loads.…
2 teilige Blende zum Verkleiden von Rohrdurchführungen 110mm
A simple 2 piece ring with an inner diameter of 15mm.
Print 2pcs and put them together. Item is scalable.
Double rosette for heating pipe / Doppolrosetten Heizungsrohr for Pipe/Rohr Ø = 18mm finishing with sandpaper Edit like you want, but don't sell it. Print Settings: Rafts: No Supports: Yes Resolution: 0.2 Infill: 10-15 Notes: Print it…
Update 12.05.2024 (May 12, 2024): Weitere Durchmesser zugefügt/ Further diameters added Auf Wunsch habe ich diese Einzelrosette zur Abdeckung des Übergang Rohr - Fußboden erstellt. Der Aussendurchmesser beträgt 55mm, der Innendurchmesser…
A minimalistic design for a pair of ⌀15 mm pipes with a distance of 50 mm.
Printed in PLA or PETG.
Remixed Nuki spacer and added two holes for screws to be able to remove original rosette on the inside and to replace it
The thickness is 6.3mm. I also uploaded a step file that can be easily edited. Print Settings Printer: FlyingBear Tornado Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: HATCHBOX PLA Category: Decor
This is design inspired by: https://www.printables.com/cs/model/165709-heating-pipe-rosette Its made for 1.75cm thick pipes
Intro I'll cut right to the chase: here's a parametric Pipe Mask that should fit almost all pipes amd cover any contractor caveman that can't seem to make a simple hole in a wall (tile) to fit the plumbing pipes. Made in (Autodesk) Fusion…
Medaille/Schleife/Preis/Rosette für Vater. Als Geschenk für Papas perfekt auch zur Geburt oder Taufe vom Kind. Jeder Vater wird sich darüber freuen. Kann so gedruckt werden, dass die Schrift eine andere Farbe hat wie der Rest.
Radiator pipe cover (rosette) for single or double pipes. Pipe spacing 36mm. Easy to print without suppoerts.
A 359° Rosette for heating pipes with a diameter of 16mm. Just bend it up for mounting. No screws and clips necessary absolutely safe from vacuum cleaner rammers. :D You should print it with PETG and 100% infill Print Settings Supports:…
i need a crash flange so i designed this one. It serves as a holder at the bass drum, which is a converted 16" floor tom. It can be used for crash or ride cymbals that are not too heavily used. but of course there are limits. for my…
arri rosette strap/cable holder. originally made for blackmagic design ursa brodcast g2 to suport multicable
I live in Israel, and many people have had issues with the Nuki 3.0 smart locks after installing them on existing locks. This leaves a gap between the Nuki and the door. The cost of a simple metal rosette for the door in Israel, made…
Heizungsrosette für Heizungen mit Rohrdurchmesser maximal 15 mm, Abstand 50 mm. Druckeinstellungen: 0.2 mm Ebenenhöhe, Material: PLA, Infill: 15%
Masking rosette for Fi 24 pipe such as gas stove drain. The size is matched to the pipe perfectly. I am sending a file to fusion 360 you can change the dimensions of the model based on it. The model is connected to the plug. It does not…
A open hardshell container that can be used as a purse. A TraceTrove product. There is another similar purse available.
Medaille/Schleife/Preis/Rosette für Mutter. Als Geschenk für Mamas perfekt auch zur Geburt oder Taufe vom Kind. Jede Mama wird sich darüber freuen. Kann so gedruckt werden, dass die Schrift eine andere Farbe hat wie der Rest
Wandverkleidung / Rosette für DN75 HT Rohr zur Verkleidung des Wanddurchbruches
These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…
These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…
Rosette hanger that clips together for multiple rosettes to be arranged as you like. Uses 3M Command Poster Adhesive stickers. Can be found here https://amzn.to/4eF55II Ideally you will only need 1 adhesive stickers every 3 or 4 hangers…
Diese Teil habe ich vor 4 Jahren konstruiert und gedruckt. Seit dem war es ununterbrochen im Freien. Print Settings Rafts: No Supports: No **Resolution:** 0,16 Infill: 100 % **Filament:** 3DJake PETG Notes: slicing toleranze: EXKLUSIV…
all prints fastprint 3LAYERS only optimised for 0,2 layerhight for the walls BASE layer is always 0,3 then 0,2 3Layer only use Skirt for start and slow first layer FEEL free to get your own pattern
I had to make thinner rosette's to clear our sliding door. It has also come in handy to replace missing trim blocks. I would advise replacing both trim blocks to ensure they match. I put glue on the back of the block and hold it in place…
Medaille/Schleife/Preis/Rosette für Bruder. Als Geschenk für Brüder perfekt auch zur Geburt oder Taufe von Geschwistern oder Geburtstag oder einfach so. Jeder Bruder wird sich darüber freuen. Kann so gedruckt werden, dass die Schrift eine…
Piece is split in two in order to fit over 5/8 pipe and rest on the top of our baseboard. Model can easily be remixed for your use case. To Do: Add variations for other pipe sizing.
Some simple customizable thumb screw / nut rosettes. Category: Hand Tools
Variable mount hole, switch inside source code
Easy to make, a star rosette for honoring a winner. The model requires no support but a brim is mandatory. Due to the extremely thin vertical pieces, it's recommended to print it very slowly (I used 20mm/s). To assemble, just screw and…
Studio lighting typically utilizes a Rosette or Hirth joint mechanism to enable tilting and secure the angle in place. On the Godox SL150, this mechanism relies on two plastic pins that bear the majority of the light's weight when angled.…
Hello! This is a parametric pipe cover, designed to hide the (ungly) plumbing pipes coming out of the wall. I used it to hide the central heater pipes. There is two model: - The circular one, which works perfect for pipes coming out at…
A Rosette showing status as an Inquisitor working above and beyond the Imperium of mankind to protect itself from the enemy within, without, and beyond. I've updated my original inquisitorial rosette to create something more detailed.…
feel free to modify and print no support use adaptiv 0,2 layer / 0,05steps Prusament PLA
Rosette Thumb Screw for M5,M6,M7 and M8 with M3 Stud
Hey! We have a heating pipe that is not far enough from the wall so that the standard stuff that you can buy did not fit in there. I only found the single pipe rosettes but most of the time dirt will stuck between them and i hate it. So i…
This floor rosette is designed to aesthetically cover the openings around the radiator pipes that pass through the floor
The Problem: Building a proper recoil shoulder rig for the Sony FX6 requires extending the handgrip. However, the stock Sony grip mount isn't designed for standard industry rosettes, forcing filmmakers to use heavy and expensive full…
Die Rosette ist 1mm stark und wird von zwei Seiten zwischen Isolierung und Wand eingefädelt und zusammen gedrückt. Außendurchmesser 120mm oder 100mm Innendurchmesser 30,3mm Pro Rohr werden jeweils zwei Hälften benötigt.
Parts list Used M2 screws and bolt and ran it from through to the rosette.. the mini screws that come with the rosette and TILTA will break from the threads. you can try using your own inserts but i had worst luck with them.. so try at…
I needed a simple replacement for old radiators, thus I drew them in FreeCAD and exported the sizes I needed. Feel free to use for your own dimensions.
230211 Lock Rosette/Slot Rozet 50x10 mm (2"x 4/10") / 鎖花環 / लक रसट Yet another repair in the house. When we moved in the lock rosette was missing looked for a while on the net, is available but expensive, so printed one. Color does not…
This twisted planter is a perfect fit for cactus or succulent plants. There are 2 different sizes of planter included with perimeter thickness of 2mm. The print is simple, just make sure that the bottom sits on print bed. There is no need…
Heyho This is quite a simple Design :) In my kids Kindergarden they had a keyhole with a big opening. Due to "pinch protection security" we had to create an opening <8 mm so the tiny fingers can't insert into the hole. So I designed this…
Two design variants are provided - straight and curved. The model includes inserts labeled "*Lumin" that can be printed in luminiscent or contrasting material to enhance visibility. For the bearing to rotate the model has to be printed in…
For my MDF Rose Engine I decided to 3D print all my rosettes instead of buying premade ones or having them made from acrylic using CNC. Morevover, all my rosettes have been designed parametrically so it's easy for me to generate new…
Custom made bathroom rosette by order
You can configure your own (with custom size and position of the slits) on my models repository . Context My landlord hired by painter to paint the ceiling of my flat. They did not remove ceiling lamps, so when we wanted to install a new…
Zapuštěná rozeta pro otevírání dveří, pro otvor 44mm, včetně protikusu a krytky zámku Recessed rosette for opening the door, for a 44mm opening, including counter and lock cover
Rosette für Außenwasserhahn 1" Innen-Ø35mm Außen-Ø100mm Höhe 10mm
šablona na růžice pro koně i nekoně. Jednotlivé kruhy jde odebrat ve sliceru, pokud jich chcete tisknout méně. rosette maker / template Viz.
Aligns door/window casing rosettes for 1/4" reveal.
There are two versions here, set for 1/2 inch copper pipe. One without screw holes and one with screw holes. The screw hole version is more like something you'd pick up at HD, and set for a #6 screw. I probably would use a little silicone…
The outdoor knob sometimes touches the paint of the door, causing the paint to wear down. This rosette/spacer prevents the knob from touching your paint.
