93 models
I printed it with 50% infill, brim and supports addded to: The bottom face of the wings (not the inclined ones) The base circle The center square which is a bit above the ground the small gaps on the driver pins sticking out downside The…
From May 2026 availabe mount for motor rev F5, TNX OK1GOD! Four predefined sizes (S,MS,M,XL) M size max torque 2200 kg/cm (215 N/m) without destroy Included terminal for install motor from cordless drill Without nuts (tapered holes) DXF…
This is a Remix of : https://www.thingiverse.com/thing:5345813 The original Model's Rotation Piece was to long and pushed on the front end of my Nerf Hammershot. I removed the pins that held the darts in to increase the power. Post…
This is an update of the first version of the rotator system published earlier this year (model 64331). This system uses more commercially available waterproof boxes and an updated controller circuit that has a smaller footprint and PCB.…
This model contains parts needed to build a remote rotator system for use with the MastWerks mast and BuddiHex antenna. The system has four components including a motor box that attaches to the MastWerks mast crank fitting, an electronics…
I'm doing a lot of magnetic bead DNA purification protocols, and they frequently have a step that requires rotating the tube at a low speed for 5-10 minutes. Until now, I'd been taping the tubes to the rotator shaft of the forgotten hyb…
A simple interesting mathematical sculpture. Math is in the design of nature as illustrated in this simple yet elegant model. Print Settings Rafts: Yes Supports: No Resolution: Hires Infill: 16% Category: Math Art
My solution for replacing and cleaning Hunter MP Rotator nozzles. The MP Rotator system has proven itself over time. It is reliable and efficient. But there are minor inconveniences in terms of maintenance. The water that is supplied to…
Diseño para un organizador rotatorio de escritorio . Su diseño a diferentes alturas y con diferentes profundidades, con una base y cuerpo octogonales, pero cúspide cuadrada, permite configurar su uso al gusto de cualquier usuario. Hay…
Posted the fixed models here, so as not to produce copies on the sites. Link to rotator. Link for more info.
The 90 Degree Rotator Adapters for the MMS Collection! Use these to change the orientation of your rails when building out your modularity kit! - MMS 90 Degree Rotator Small - MMS 90 Degree Rotator Large Whether you want a magpouch…
The stand consists of 2 parts, the bottom and the top, choose the pattern you like the most. -Material: ~ 10gm -Printing time: ~ 2 hrs -Recommended quality: 0.2 mm -Dimensions: 61 x 71 x 11 mm If you like my work, don't forget to buy me a…
Material: PET G (prefered) is held together with screws Motor holder specificaly made for the n20 60rpm motor + 3D printed gears 10 to 100 = 6 RPM bottom holder not made- reason=>so that model can be used with different sizes of pipes=>…
An alternative version of the original but with a print-in-place rotatory cable holder.
This is a rotator lock, for light use. It is really just a unnecessarily complicated slide bolt, activated by a rotator - but it looks pretty!. The rotator has a 60-degree twist, so well within the human wrists' single movement limits and…
Very nice design trust me :) you might have to sand the stick to adjust the roughness of the hinge:
I made this back when the painter helper contest was going on, but I never posted it. Probably because they took my picket fence with print in place gate out of the plant climbers and support contest. 608 bearing just pops into place.
This rotator uses a small stepper motor to rotate your plant for even growth. You can also use it as a display to rotate anything you are trying to present, perhaps jewelry in a window display. This is currently a work in progress, so you…
The lower hook for winding the cord on my Shark Rotator vacuum (Model UV560 31, according to the label) broke, leaving the cord a tangled mess. This is a rough replacement for the original part. It's not a perfect fit - the contours on…
*UPDATE* 17.04.2023 added bearing upgrade https://www.printables.com/de/model/455378-bearing-upgrade-coin-rotator *UPDATE* Made an Update for the rotation parts: tower now is more stable, especially when higher stacked nearly no noise…
A simple rotating day selector to act as a reminder. It could be useful for a variety of applications; tracking slow drying adhesives or paints, cleaning reminders, aquarium maintenance reminders, etc. Print instructions I printed both…
Modelo de trofeo para el deporte que mas te gusta. Consta de una peana rotatoria que se compone de 3 piezas encajables dos de ella y la otra para darle estabilidad debe de ser pegada. Ademas necesitas un rodamiento para que el giro sea…
This model interfaces t0nito's '1.7 Ghz HRPT Helicone Antenna' with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' , allowing both to fit together making it a great addition for tracking L-Band satellites. More information on my…
The source marked this model as adult content.
Tha Vacmaster is an awesome and affordable bike fan, but the main issue is that the air flow is delivered as a horizontal stream not reaching full cyclist's body. This nozzle rotates the air stream to a vertical one which significantly…
Spojovací váleček otočného talíře v mikrovlné troubě. Tento je pro značku Baumatic, ale bude fungovat i jinde. Na fotkách je kousek po několika měsících používání. Je to PLA, ale v podstatě to teplotně stačí. Když tak se po čase vytiskne…
Adapter to allow the use of Shark or other vacuum attachments with a 35mm inner diameter (~1-3/8") on a vacuum with a hose of 32mm (~1-1/4") outer diameter. Does not work the other way around. The hole is straight all the way through with…
Arduino Mega mounts are set for 3m heat press inserts. You might need to trim some of the protruding pins on the bottom of the Arduino, or just remove them mounts entirely in the slicer if don't want them. There's room for a small buck…
A reworked and improved version of my previous spice rotator. https://www.printables.com/de/model/433992-spice-rotator-printed-only Going to add more mounting options soon. All parts are designed to be printed without the need of supports…
I wanted to create a shield for covid-19 from scratch to meet the needs that my mother found in the hospital, where the few protections left that were provided were of low quality and bad design, this project of mine implements the…
A reworked and improved version of my previous knife rotator. https://www.printables.com/de/model/475103-knife-rotator-printed-onlycustomizable Going to add a customizeable TopPart soon. (for custom inserts) Almost all parts are designed…
BuddiHex wireless manual rotator. Parts needed: https://amzn.to/47RXNyK - BRINGSMART DC 12V 80rpm DC Worm Gear Motor https://amzn.to/4nQ6QpO - Newnewliu DC12V Forward and Reverse Remote Control Switch screws Be sure to put the remote in…
*UPDATE* 17.04.2023 added bearing upgrade https://www.printables.com/de/model/455378-bearing-upgrade-coin-rotator Based on: https://www.printables.com/de/model/422240-coin-rotator-eur-update **Since i do not own any Dollar Coins, i…
These tools were primarily made for the FANUC Standard educational package and the original cylinders it came with, but will work with anything that uses the 4040 T-slot plate system. The tools can be installed both ways horizontally, so…
*UPDATE* 17.04.2023 added bearing upgrade https://www.printables.com/de/model/455378-bearing-upgrade-coin-rotator Based on: https://www.printables.com/de/model/422240-coin-rotator-eur-update **Since i do not own any Yen Coins, i created…
rotatory dial phone - with rotating dial! It was originally a project I did to improve my 3D modeling skills, and I wanted to share it with the world! so I did. printing: it wasn't exactly built with the intention of it being 3d printed…
the silhouette version need you to cut and glue the image with the same dimensions of the pikachu in the keychain. the dimension of the pikachu in the keychain are 32x32mm.
I had trouble with the original hammershot spinner file from Radioactive52's 8 round hammershot elite cylinder, likely because my settings aren't dialed in too great. His work as a whole is great though, definitely worth checking out: -…
Rotating hurricane
UPDATE 31.08.2023 Please note i've created an upgraded version of the knife rotator: https://www.printables.com/de/model/568918-knife-rotator-reworked-v2-printed-only This Knife Rotator is for various types of knifes. The fitting system…
When replacing my Celestron OAG with the PlayerOne OAG i lost the possibility to rotate the field of view. So I designed first a version for CNC production, but as this is expensive and I was curious if it can be made in a printable…
you will need a ¼"x16 x 25 nut and bolt to go through the middle of the part to allw you to fit thr ring light (Tripod bush). it's a good idea to file or grind down the head of the bolt by about half, this will make sure it doe's not rub…
This ring is a simple one perimeter print. I used asa and cut the ring to get it to drop into the rotator threads. This prevents your camera or eyepiece from moving around and getting off center. I recommend printing this with a brim.
Update: I've centralized most of the information in a new web site here: https://3ddoodle.com/spool-rotator/ I like tricolor, co-extruded filaments. I have been working on a way to rotate the spool so the filament twists as it is fed into…
This is designed to rotate the decorative prop attached to a simple Tombstone Popper Halloween prop. One side is glued into the moving PVC link, the other is glued to the decorative prop. If the decorative prop is attached so that it has…
*UPDATE* 17.04.2023 added bearing upgrade https://www.printables.com/de/model/455378-bearing-upgrade-coin-rotator Based on: https://www.printables.com/de/model/422240-coin-rotator-eur-update **Since i do not own any CHF Coins, i created…
This is definitely a project that no one really needs, but I was sick of sorting through bags of nozzles when working on my irrigation system. I wanted a system that would be easy to contain, easy to organize and easy to see what I had at…
I needed an adapter to fix a phone holder to the MSM rotator. This adapter plate solves this issue! Self-aligning to the rotator body allows for two mount points for the phone holder in both portrait and landscape mode. The model has all…
*UPDATE* 17.04.2023 added bearing upgrade https://www.printables.com/de/model/455378-bearing-upgrade-coin-rotator Based on: https://www.printables.com/de/model/422240-coin-rotator-eur-update **Since i do not own any British Pound sterling…
For a 150-144mm in diameter mirror (mirror and housing). My mother makeup mirror base broke so created a new one which is a lot better. You are going to need one M3 heated insert (goes to the base) and a M3 screw 10mm or less in length…
*UPDATE* 17.04.2023 added bearing upgrade https://www.printables.com/de/model/455378-bearing-upgrade-coin-rotator Based on: https://www.printables.com/de/model/422240-coin-rotator-eur-update **Since i do not own any Brazilian Coins, i…
UPDATE 28.08.2023 Please note i've created an upgraded version of the spice rotator: https://www.printables.com/de/model/566336-spice-rotator-reworked-v2-printed-only…
This bearing upgrade provides: more stability for higher stacks (lesser tilt) more stability for unequal coin levels way more easy rotating What you need to purchase: 1x bearing 608-2RS Printing: 1x Coin_Rotator_Base2_Bearing [replaces…
These models are compatible with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' . The retention bracket holds the Azimuth servo in place more securely, attaching to the original screw holes of jbyrns' design. The driver attachment…
For base and spike, visit original model from mozWORLD
Simple rotator/sliding lock now with magnets so it's more fun to play with! There are 2 versions, one uses 3mm diameter x 2mm thick magnets and the other uses 6mm diameter x 1mm thick magnets Use M3 or #4 hardware to screw the top down
Gridfinity rotating bin for fun, you can rotate the stuff you store inside
Need a nice idea to show your tea packages ? Here U go, I'd advice to print a little file like a little fred the frog or something to add on top of the screw just to personalize this print even more.
Lab rotator needs Amazon parts (or similar): B07P2BLG2L 12V 2A Motor Speed Controller B01AZLA9XQ 12V 2A Power Supply Adapter B072N84JX7 12V 60RPM Gear Motor B08YYZSZVP M3 Metric Bolts and Nuts B08334N261 Flange Coupling Connector…
I could not find just the clip for holding the bottom hose bracket to the base of the vacuum. See picture.
Print in PLA. You will need a metal bearing 608ZZ. For the base not to slice I used three adhesive rubber pads. Alternatively, patafix or plastilin also work great. Smooth knitting!
practico acoplador a cable usb para lampara, es extensible, rotatorio e inclinable en todas direcciones.
This model is made from Star Wars fans, for Star Wars fans. You need an Arduino uno, a powerful stepper motor, 4 Neopixel strips and some jumper cables. You will need also some M3 and M2 screws to build this model, in case you don't want…
What more is there to say? You could use it as a fidget, perhaps.
*UPDATE* 17.04.2023 added bearing upgrade https://www.printables.com/de/model/455378-bearing-upgrade-coin-rotator Based on: https://www.printables.com/de/model/422240-coin-rotator-eur-update **Since i do not own any WON Coins, i created…
I liked Ananords design, but ordered 30mm Arcade-Buttons, so i had to re-design the top-part. Because i used a long rotatory encoder, i had to print a new “nose”. The software part is handled by a Wemos D1 Mini inside, in combination with…
Pull a string that loops through both handles on opposite sides and both holes of the disk. Give it a few loops and pull the handles apart, or if you are not using the handles, just pull on the string and watch it spin up. Release tension…
Rotate your coin by adapting the hat as necessary (see github for more info)
This is an attempt to add a belt drive similar to what is on an actual bn44e. This is just the changed parts - you'll need to get the remaining parts from https://www.printables.com/model/1227933-bn-mobile-directo-not-rotational…
I created this because I bought a 5 arm helping-hands device for soldering, from AliExpress, and the base for it clamps to a desk in an odd direction. I designed this to rotate the clamping mechanism 90 degrees for better positioning. No…
I made this soap mould holder/rotator for my darling's soap-making activities. It holds the wood/silicone soap mould at any angle you like for pouring/shaping of the soap. It's quite sturdy. Ignore the progressive red soap scrapers in the…
I blindly mashed the 2" adapter for my Canon M50 onto the GT2 pulley for Astro_Tony's derotator. Haven't even had time to check the back focus so marked it's a work in progress. I also changed the stepper pulley to a 4mm hole based on a…
An open source sample rotator Dhankani and Pearce (2017) described an open-source 3-D printable sample rotator that proved very useful, but it did not have an adaptor for PCR tubes. Thus I modified the existing “rotisserie” (their term…
The multifunctional PCB box uses guide plates and a set of snap-in jaws for easy assembly/disassembly without the need for screws. It also allows for DIN rail mounting or front panel mounting depending on configuration. Wiki page
---for english please scroll down--- --- moved from MyMiniFactory --- Der drehbare Fuß der Artemide Tizio-Schreibtischlampe ist mit Rastnasen befestigt, die im Alter gern abbrechen. Dieser Adapter ersetzt sie. Befestigung mit drei kleinen…
Desk Fan Rotator These two parts form a rotating platform. I specifically designed it for use with the Gaiatop USB Desk Fan as its built-in swivel capabilities were too limited for my use. Additionally the extra space was useful for…
Peana que consta de dos partes y necesita un rodamiento para que gire de manera perfecta. Ideal para poner encima placa de trofeo, Como exporitor para joyeria, para tus figuras imresas etc
So I made this enclosure for my original buddihex rotator project. It just houses the switch part. All you need externally is a 12v anderson power pole connector.
glue optional just m5x30 screw and 1 insertion in the upper part impression 0.2, PLA, Nozzle 0.4, 15% an 2 small magnet Maximum width of 5mm and height of 3mm to be stuck underneath the base, one next to the other, one positive and one…
Attaches to VWR Tube Rotator Cat. 444-0502. Had one in my lab without any inserts. Designed to hold 8pcs 50mL falcon conical tubes and 8pcs 15mL falcon conical tubes at once. Uses 4pcs M5x12mm screws to secure on the rotating shaft. Print…
The model features a handle, and a gear mechanism to spin around spices. Not guaranteed to work as I do not have a 3d printer but I just want to practice my skills and challenge myself.
What is this? This is a easily reproducible benchtop simulator for training arthroscopic rotator cuff (supraspinatus) repair. It was developed as part of a master's thesis at the Postgraduate Program in Surgical Clinic, Federal University…
Rotator Cuff Ball Infraspinatus sits in a shallow fossa on the scapula, so a large ball bridges the ridges and never reaches it. This one is sized to drop into the fossa. TARGET AREA: posterior cuff, infraspinatus SPECS - Size: 96 x 84 x…
I needed the filter holder for my Shark Rotator NV601. It should be able to be printed without support. There are two pieces, the holder and the seal. I recommend printing: Holder: PETG, ABS, or other high temp material. Seal: TPU 95A or…
Modelo de trofeo para el deporte que mas te gusta. Consta de una peana rotatoria que se compone de 3 piezas encajables dos de ella y la otra para darle estabilidad debe de ser pegada. Ademas necesitas un rodamiento para que el giro sea…
This model interfaces t0nito's '1.7 Ghz HRPT Helicone Antenna' with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' , allowing both to fit together making it a great addition for tracking L-Band satellites. More information on my…
Rotating Storage Box is a compact and satisfying organizer that opens with a simple rotation to reveal four triangular compartments. It’s perfect for storing small items on your desk while adding a fun interactive mechanism to your setup📦…
The project was based on Fusion 360 and the Arduino IDE platform. I saw a lot of rotary tables on the internet - I designed this one with a diameter of 16 cm, so it can be printed on a Prusa Mini+ printer. The project contains popular and…
This is an improved version of my previous Coin Rotator. Additional currencies will be added retrospectively. Currently: Euro € Main Improvements: no tipping, even with unbalanced load additional top inlet part for adding coins…
![Spice Rotator [Reworked] - printed only](https://media.printables.com/media/prints/566336/images/4534597_9c2148e5-a3aa-417d-98b7-59721aac3adc/img_20230828_172404.jpg)
![Knife Rotator [Reworked] - printed only](https://media.printables.com/media/prints/568918/images/4554009_0cd332d7-5c41-4906-90c5-8070b6ae1999/img_20230831_113157.jpg)
![Spice Rotator - printed only [Outdated]](https://media.printables.com/media/prints/433992/images/3592270_c49e3b4c-8a3d-4ff9-aca8-619222ef38a2/img_20230326_144148.jpg)
![Coin Rotator [Reworked; printed only]](https://media.printables.com/media/prints/758826/images/5917658_c6dfc2b2-5744-483c-822e-04c117e4632d_542c41c2-0879-4cf0-9159-fa11370ac630/20240210_084018.jpg)