44 models
I've created this cupholder because in my 2017 Audi S5 the RedBull cans and other stuff wasn't fix in the standard one. Also I've added a storage for my IQOS Iluma One and space for 2 cigarettes which fit in and are prepared, so you don't…
Sanding belt stand for an RS550 12V DC motor that can be commonly found in many cordless drills. Use M3 nuts and bolts to put everything together. For attaching the arms to the rails you can use hex head M3 bolts and butterfly M3 nuts to…
Designed for a hoverboard motor conversion using the FFbeast or OpenFFboard firmware with a MKS Odrive Mini controller. This is a compact, fully 3D printed enclosure that relies entirely on printed parts, standard bolts and nuts to hold…
There is a giant cubby next to the steering wheel on this car. Here is a tray that fits in there snug and allows that space to be more usable. Enjoy! The published pic was before I embedded the Audi logo in the bottom. My dimensions were…
I created a base to mount a logitech RS50 sim racing wheel flat to a table with bolts. The original mounting base utilized a big clamping screw that hit my knees on my homemade simracing setup. Printed in PLA+, holds up fine to 8nm using…
The RS50 phone holder can be mounted to the front of the direct drive motor by replacing the 2 M6 screws on the face. It is height adjustable and will fit devices from 70-100mm. The design does not block the screen on the motor and allows…
Heckspoiler für Carrera Audi RS5 DTM im Maßstab 1:32 Es wird empfohlen den Spoiler wie auf den Bildern gezeigt, zu drucken (Rückseite nach unten auf Druckplatte) damit die Streben möglichst stabil sind. Nach dem Drucken ist etwas…
Logitech RS shifter bracket for Playseat Challenge
This is a replacement bleed nipple cover for Shimano BR-RS505 hydraulic brakes. It may fit others, but I've not tried. It would probably be best printed with a flexible material, but PLA seems to work ok. Print Settings Printer Brand:…
DJI RS3 & RS3 Pro Gimbal holder for IKEA Skadis Pegboard using T-Clip system for best quality and strenght. It can securely hold DJI RS3 and RS3 Pro with the battery grip. Designed to be put as in the photos to make up for the slight…
Project ZERO_XU_DESIGN: RS Wheel Hub 320mm Round Steering Wheel DIY Kit / 320mm圆形方向盘DIY套件 项目概述 / Project Overview 本DIY项目为制作一款适用于罗技RS Wheel Hub的320mm 圆形方向盘。 This DIY project is designed to create a 320mm round steering wheel compatible…
Este modelo esta basado en el modelo de Matgil: https://www.thingiverse.com/thing:6013196 Debido a la similitud entre el modelo RS4+ y RS5. Este modelo puede ser impreso sin soportes ni relleno alguno. Parametros recomendados: Espesor de…
Goosky RS5 / RS6 Battery Tray GT060071 Print a calibration file first to check the fit. Adjust the scale (+/-) if it is too loose or too tight After printing, wait until the bed temperature cools down
Shorter sleeve allowing to fit a BB-RS500 in an 68mm bottom bracket without spacers
Audi RS5 DTM as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Printed with PLA+. Mounting with M3 screw.
New gearbox for kids car, allows you to upgrade current motor to 12v RS570 3000kv motor, for much higher speed. One file is a dummy file, which allows you to make very fast print only for the motor and the first sprocket wheel, I made…
Portachiavi audi RS5 stampabile in blocco o diviso tra base e tasselli.
Goosky RS5 / RS6 ESC Fixing Plate (Hobbywing 150 V5.1 or Similar Model ) GT060047
Overview This is an easy-to-use wired CarPlay dock designed to fit a wide range of modern Audis with the armrest wireless charging kit. In my area, wireless CarPlay is unreliable due to radio interference, and I hated fussing with cables…
An Adapter for a Kreg PRS5000 Router Lift to suit a 65mm Router. The fit is very tight to make sure its super secure. Options for Smooth or keyed to a Makita RT0700C. Fusion files included. Print Settings Printer Brand: Creality Printer:…
A simple collar adapter for a Kreg PRS5000 router table to support a 65mm Router like Makita RT0700C Options for smooth or keyed for the RT0700C. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution:…
Halter für Funk-Sensor der ELV Raumklimastation RS500.
Goosky RS5 / RS6 Landing Gear SKU: GT060052 SKU: GT060102
Ender 3 pro psu cover with RS5V psu for Raspberry Pi this is my solution for upgrading the psu fan with an always on 80x80x25 Noctua the original thermal controlled fan is mounted too, but was never needed so far the electronics of my…
Supports for the mounting plane are needed. I printed the lid in the shown orientation. Longest side has 320mm.
Goosky RS5 / RS6 Vertical Fin M3x10 required
A small bracket to provide additional grip for the Logitech RS50 table clamp. It also helps with keeping your wheel in a consistent location on your desk when removing and reinstalling it between uses. It also reduces the clamping…
The "heat shield" of the Imalent RS50/MS08 has a major design flaw: The switch is exposed and it is very likely to switch the fans on whenever you don't want to. This cap clips onto the end of the heat shield and protects the switch from…
Goosky RS5 / RS6 Main Frame Support Set GT060048
This doorshelf spacer helps to keep your Samsung Foodcenter organised. I glued a small piece of synthetic leather with the help of the Glue_helper.stl to the printed part to prevent slipping in the doorshelf. The gluehelper is visible on…
Goosky RS5 / RS6 Tail Shaft Slide Bush GT060101
GOOSKY RS5 / RS6 - COMBINATION OF TWO PARTS GT060047+GT060048
GooSky RS5 - RS6 Tail Push Rod Guides
This design will have surpassed 600 test flights by the time of this publishing Goosky RS5 - RS6 3D Printing Canopy https://www.amainhobbies.com/goosky-rs7-canopy-grommets-4-gsk-gt040093/p1540451
As pointed out by MANY reviewers online, the tapered shape of the build-plate base on the newer ELEGOO resin printers can be a bit awkward to grab Especially with heavy prints or slippery fingers, it is really easy to drop. Which can…
Thank Sebastian Garpiel for great work Auto Support + Manual Support are MANDATORY GooSky RS5 Aluminum Front Canopy Mounts (2) GooSky RS7 Canopy Grommets (4) https://www.amainhobbies.com/goosky-rs7-canopy-grommets-4-gsk-gt040093/p1540451…
Logitech RS shifter bracket for Playseat Challenge
Two versions available. Large single print or 2 pieces interlocking dovetail for smaller print bed sizes. -No supports needed. Use at least 4 walls & 8 bottom/top layers for strength. 4 mounting holes with countersunk nuts (M6) metric…
A small bracket to provide additional grip for the Logitech RS50 table clamp. It also helps with keeping your wheel in a consistent location on your desk when removing and reinstalling it between uses. It also reduces the clamping…
DJI RS3 & RS3 Pro Gimbal holder for IKEA Skadis Pegboard using T-Clip system for best quality and strenght. It can securely hold DJI RS3 and RS3 Pro with the battery grip. Designed to be put as in the photos to make up for the slight…
Two versions available. Large single print or 2 pieces interlocking dovetail for smaller print bed sizes. -No supports needed. Use at least 4 walls & 8 bottom/top layers for strength. 4 mounting holes with countersunk nuts (M6) metric…
