716 models
Attention: we are switching to 1 kg refills, so this 800 g version is unfortunately no longer compatible. The new 1 kg Masterspool can be found here: https://www.printables.com/model/1464203-masterspool-1-kg-das-filament-refill…
Print approx. €5.70–€6.96 excl. taxPreliminary estimate for one variant
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
Print approx. €22.26–€27.21 excl. taxPreliminary estimate for PETGSource material: PET
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Whats even better than upcycling? Not creating waste in the first place. This turns your Prusament-Spool into a Refill-one. If you are looking for a design that does not require glue, I recomment this one:…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
Refill Spool für Filament von der Marke Recycling Fabrik. In dieser Version wird die Spool zusammen geschraubt und hält dadurch besser als in der Version von der Recycling Fabrik. Sehr stabile Refill Spool druckt in PETG um das Filament…
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant
UPDATE!!!! Oct. 2020 I change the case a little bit and the upper and lower mount. If you print the old case and your mounts doesnt fit, you only print the mounts new. then it works. Sorry You need 2 x upper mount and 1 x lower mount.…
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €12.99–€15.88 excl. taxPreliminary estimate for one variant
08/2025: Updated 3D models for the screw and the center piece. The screw is now hollow! With this parts you can convert your empty Prusament spool to a Masterspool. I tested several other Prusament to Masterspool adaptors, but none of…
Print approx. €9.95–€12.16 excl. taxPreliminary estimate for one variant
After creating the dual color version I thought it would be really nice to have a hexagon version, because everything is better with hexagons. So I tinkered with the SVGs I extracted from various layers and added and embossed them on the…
Print approx. €6.90–€8.44 excl. taxPreliminary estimate for one variant
The 3MF files include modifiers to ensure rigidity when deleting the top and bottom layers and to be able to still add filamet info stickers. Works well with DasFilament, Fiberology, 3djake and other refills conforming to the Masterspool…
Print approx. €4.94–€6.03 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of zoltanf's "Prusament spool to master spool adapter " For my spool holder i wanted the outside of the prusament spool to remain the same without anything sticking out so this remix has some blocks that hold screws…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for PETGSource material: PET
This model is a replacement I made for the 2.4ghz mouse dongle shroud of my Razer Basilisk X Hyperspeed that snapped in half. I tore apart the mangled original shroud, put the PCB into the slot of the print, and then put the metal USB…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Hallo ich wollte mein Meanwell Netzteil leiser haben aber trotzdem die Kühlleistung nicht verlieren. Da wollte ich gleich meinen Noctua NF-R8 benutzen so entschied ich mich für meinen Zaribo dieses Abdeeckung von…
Print approx. €3.35–€4.10 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of 87squirrels MasterSpool Remix. https://www.thingiverse.com/thing:2794052 I just made the wall a little more thick to increase stiffness and reduced the diameter to 100mm to make it easier to use. meanwhile I have…
Print approx. €4.36–€5.33 excl. taxPreliminary estimate for PETGSource material: PET
Ein Werkzeug welches ich Täglich in meinem Unternehmen verwende. Z-Höhe sollte 7mm betragen, um ordentliche schnitte setzen zu können. A tool that I use daily in my company. Z-height should be 7mm to be able to make proper cuts.
Print approx. €4.47–€5.47 excl. taxPreliminary estimate for one variant
Tired of Hearing your Ender5-Plus sound like a jet engine? do you feel like every day, all you hear is tinnitus ringing in your ear as you sleep? FEAR NOT, for I have blessed you the file and setup you need to do in order to make your PSU…
Print approx. €10.62–€12.98 excl. taxPreliminary estimate for one variant
This has been in work for few weeks, I designed it in Fusion 360 and tested with DasFilament refills. Print instructions This was designed in Fusion 360, I went through many different locking mechanisms and then came out with this one. It…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
The RPS-320-24 is delivering a lot of power, but the original fan was just too noisy. So I choose a Low noise fan NF 6*25. But due to his width of 25mm, it must be installed outside of the original frame, so I designed a new cover to…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
Masterspool for refill filament. Spooldiameter: (inside) 101.5mm x 45mm, (outside) 200mm It is designed to fit the refills from Das Filament. The spool can be used standig or with 608ZZ bearings. BOM: 3x M3 screws (~ 10mm) 3x M3 nuts…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
I made this model due to fact that I had a power supply left from an old 3d Printer and I wanted to reuse it as a lab power supply with voltage of 15v and 10A. The enclosure can be screwed to some wood part. I use a power switch from ebay…
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for PETGSource material: PET
[Update after a few months of usage] Some refill coils may push the spool walls outwards and you may end up with a ruined spool. To prevent this, apply a bit of superglue to the grooves or ridges of the adapter — Initial description —…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Nachdem meine Reinigungsklappe nicht mehr richtig verriegelt wurde habe ich den Riegel neu erstellt. Jetzt lässt sich wieder der Spülvorgang ohne Probleme durchführen. Der Riegel wurde in PETG gedruckt mit einer Schichthöhe von 0,1mm. Den…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
If you're using a Lack enclosure for your Prusa and are using the adjustable sliding spool holders from https://www.prusaprinters.org/prints/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr, you might have discovered that the spool…
Print approx. €4.28–€5.23 excl. taxPreliminary estimate for PETGSource material: PET
The other two eSun Repwinder spacers I found on Printables did not fit my eSun Masterspool, so I created my own. The eSun Masterspool requires a 6mm spacer, while normal eSun spools require a 16mm spacer. This model is parametric, so it…
Print approx. €0.36–€0.43 excl. taxPreliminary estimate for one variant
Leider sind die Abdeckungen der ungenutzten Anschlüsse unseres Solarspeichers verloren gegangen bzw. haben schon immer gefehlt. Um den Speicher besser zu isolieren, habe ich neue Kappen entworfen und mit Glaswolle ausgefüllt. Da ich im…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Kleine Spulen passen nicht ins AMS. Bambu Lab gibt eine geeignete Spulenbreite von 50-68mm und einen Durchmesser von etwa 200mm an. Kleinere Spulen wie etwa die 250g magicPLA von 3DJake können mit dieser Adapterspule und den passenden…
Hallo Das ist meine Version eines Eierspenders. Es passen etwa 16-17 normale Eier rein. Es hat auch Platz für grosse Eier! Einfach zusammenkleben, die 6 Bolzen nicht vergessen. Masse: 282mm x 180mm Hello This is my version of an egg…
articulated flowerspot 0.20 layer 15% infill no supports
This A5-sized template helps you to draw perspective lines in an isometric view. Getting the perspective right can make or break a (product) drawing. This template helps you draw help lines every time. If you want an A4-sized version…
Introducing the ultimate hunt, the Slaughterspine from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 120mm base. It has been split into a few, easily printed parts that come together without…
Choose tall or wide and scale to any size! Prints in spiral vase mode. Filament here https://www.amazon.com/gp/product/B0C8MBNF27/
A very easy-to-build Airspeed Indicator for flight simulation. It comes in two different versions: either articulation by an SG-90 micro servo or with a 28BYJ-48 stepper motor (recommended). UPDATE 2024-12-21: Fusion 360 Source added…
I'm a big fan of refill filaments, but AzureFilm's masterspool doesn't have a strong connection between the 2 parts. It risks detaching and you are left with the filament scattered. That's why I designed the 2 parts with a thread for a…
This is a redesign of the MasterSpool by Richard Horne (aka. RichRap) . Ideal for DasFilament and FishyFilaments . The spool is now fully symmetrical. The spool end can be fixed more easily, and there is a release path for filament…
Die Pyramiden lassen sich schnell und mit wenig Materialeinsatz drucken. Sie werden einfach zusammengesteckt und lassen sich bei nicht Gebrauch auch wieder auseinandernehmen um sie platzsparend zu verstauen. Die Pyramiden sind 40mm breit…
Don't lose your keys to the depths of the seas! The Floating Keychain is for anyone who needs to use a key when around water. Prevent your keys from sinking by attaching the Floating Keychain. Use cases include boating, fishing, water…
MAXTERSPOOL - ONE SPOOL TO RULE THEM ALL. Dear Friends, From the first moment i saw the idea of Masterspool i was in love with it and hoped lots of manufacturer going with this idea and producing for this Format. But they did not :-( lots…
Includes STL and Bambu 3MF file.
Update Version 1.3 - 27.02.2026 A scale was added to the B side to better estimate the remaining amount of filament on the spool OpenPrintTag ready: The shape was slightly adjusted (B side) and markings were added for easy attaching an…
This is my entry for the FormFutura Refill Master Spool Design Contest. To challenge myself I wanted to design a spool that consists of two identical parts, no supports, no separate printed parts for connecting the two halfs and no…
20230322 ： new version has been updated. At first , the knbob is from Here , and thanks Yurshevich They are the perfect substitute for the original ALL the models are for studying only. BOM： Square head bolts M6*20 x2 Nuts M6 x2 Print：…
Today we'll be building an Airspeed indicator for the Cessna 172! This Thingiverse will soon become outdated. For the most up to date models, check out the GitHub: https://github.com/CaptainBobSim/The-Cessna-172-Project-V3 (check section…
Hereby I release my AIO ReFill - Masterspool aka (All In One ReFill - Masterspool). after having a lot of annoyances in the industry by companies releasing and re-releasing or resizing their refill spools I thought this is enough… so I…
(English version below) Erweiterbare Umkehrspindel basierend auf Vorarbeiten von Florian und Ideen von Florian, pinot und Stefan aus der ft:c . Zwei Endstücke mit beliebiger Anzahl von Mittelstücken. Die Endstücke alleine ergeben eine…
-------------------------- IMPORTANT NOTE: Recently some of the spools sold by BBL have slightly different (larger) diameter of cardboard core. This model has 80,4mm core and was designed to snugly fit 80mm core spool. Please measure your…
Ein kleines Figdet Fingerspiel für Zwischendurch :) Alle Teile können ohne Support gedruckt werden. Für den Zusammenbau benötigt ihr: 1x Basis 1x Hebel 1x Griff 1x Stift 2x Mutter 2x Schieber Es wird kein Kleber für Mutter und Griff…
Hier eine Bienen-/Insektentränke mit einem Marmeladenglas, da mir die Flaschenvarianten zu wackelig erscheinen. Das passende Glas hat eine Öffnung von ca. 77,5 mm - diese gibt es ja in unterschiedlichen Höhen, siehe Fotos. Gedruckt habe…
Introducing the Vaessen Motorsports VP-2, these are a long term project following on from the VP-1 pedal set I released. I liked that set, however it involved a lot of machining work which is not feasible for most DIY makers. I set out to…
I needed a clamp that exerts force even when there's little material between the jaws, or that has more force than other clamps. So I designed a clamp with separate jaws that gains preload through the thick jaws. Additionally, it looks…
This is a Meanwell LRS/RSP Mount for my DIN Rail Bracket. You can find the bracket here ! For the DIN Rail Bracket Mount you need M3 countersunk screws. For the Meanwell Power Supply you need M4 screws. 2023-03-16: - Bracket holes…
Lay on flat surface in slicer and print with supports.
A small cover for the wiring terminals of the Meanwell RSP-320 power supply. Edit 08-2022: Thanks nosstromOS for confirming the compatibility with the LRS-200 power supply. Thanks Keith Chong for confirming the compatibility with the…
Ich habe nur ein Design update gemacht. Es wurde ein andere Wabenmuster erstellt und ein Platz für Label geschaffen für IMPROV3D! Adapterspule Bambu Lab AMS. Die Adapterringe sind unverändert geblieben. --------------- ENGLISH…
My toddler isn't fully aware of where his feet are at all times, so sometimes he'll accidentally knock down our Superspace build (getsuperspace.com if you don't know what they are - magnetic building tiles for dens and other structures).…
This is my design of a shooting patch dispenser, BOM: Printed Parts Plastic sheet(optional for windows) 3x M3 Flat Head Screw (25-27mm or ~1 Inch) - For the Single Dispenser Version OR 3x M3 Flat Head Screw (~50mm) - For the Double…
Use this stencil to lay down some stars on your project. Two symmetrical sides offer different sizes, and you can even lay the smaller set over the already marked larger set for a multiple colored star effect. Happy making!
For the new refills with holes in cardboard. My master spool is compatible with AMS Lite, if someone tests it with AMS I'm waiting for feedback.
Introducing Refill Masterspools, the ultimate solution for 3D printing filament. With over 16 years of experience in 3D printing and product development, we at 3DP have created what we belive is the best refill masterspool. Our focus on…
In order for this to work, all letters must be the same height, and there must be no spaces. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Notes: You might want to use support blockers in some tricky areas.…
I am a lazy person, so, needed a thing to lift Q1 Pro Perspex lid when printing where heated chamber is not needed. It works well. Use when printing with likes of PLA.
Ich präsentiere euch die ultimative Lösung für das Problem mit Getränkeflaschen im Geschirrspüler. Die Getränkeflaschen kippen nicht mehr um, haben Halt. Mein Modell ist auf meinen Neff Geschirrspüler angepasst, d.h.: 25mm Abstand der…
all credit for the idea goes to RichRap and his MasterSpool https://www.thingiverse.com/thing:2769823 https://richrap.blogspot.de/2018/01/masterspool-proposed-standard-for-3d.html I really like the idea of saving shipping and prodution…
Updates 29-09-2024: Uploaded a 5-piece split model (inform me if it doesn't fit your printer) 26-09-2024: Uploaded the complete file of the front fender. (.step and .stl available) 01-05-2025: After some trial and error, we found out that…
My son wanted to sell his Beyblade stuff, and one leg of this arena was missing, and I thought lets waste time to remodel that thing. Lucky me one of the legs remained and I could use it as a measure model. It fits perfectly and was fun…
I made this Solderspool-holder for 2 spools with an inner diameter of at least 17 mm.
This is a remix of the stellar model by fixumdude inspired by the X-34 Landerspeeder Luke pilots in Episode IV. Added a few cutouts on the top panel of the speeder to allow for easier coloring. Printed and sliced on Bambuslicer using a…
I used the dragon from: http://www.123dapp.com/creature/Gargoyle-Dragon/3355535 and BLENDER for cutting out the pipe. Two versions: for 50mm and 40 mm pipes Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: No Supports: Yes…
Here is my Masterspool inspired by Fiberlogy's new 2023 spool design. These were first shown at Formnext in November and look really cool. Apparently the new spools will be reusable for their refill packs but as its early days, no one has…
An impossible staircase reminiscent of M.C. Escher and Oscar Reutersvard. The model must be viewed from the correct angle in order to see the impossible shape. Join me in creating magic and supporting my 3D printing and design projects by…
Box for Razer Basilisk V3 X HyperSpeed to protect it while traveling. You can pad the box with the thin foam the mouse came in to make it even more snug.
This is a minimalistic version of the MasterSpool for holding filament refills and samples. Update Part 2 V2 now its possible to secure the parts with just a piece of filament to prevent self opening. Put a piece of filament, or even…
Update april 2023: The Bambu Lab X1C and P1P are printing more secure as my Prusa's so I've minified the tolerances to make it print great for printing at the Bambu Lab X1C and P1P === I had some problems using the otherwise great…
Zwei verschiedene Größen von Lackierspitzen STL's und Freecad-Dateien sind beigefügt Two different sizes of paint supports STL's and Freecad files are included
A DIN rail mount for a Mean Well RSP-320 power supply. You will need to print two tabs for this design. They can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab…
This is a Masterspool for your GST3D Refill Filament. It has carve outs for the Zipties and it is a left hand thread so it doesnt come apart when beeing used.
It is not a difficult model but there are some important details that must be taken into account so that it prints well. I recommend reading the printing instructions. Description and operation This template allows you to create an…
Einfach zu bedienen ----- Einfach eine Reihe von Löchern bohren, in die Mitte des Stifts schieben und das Gelenk zusammendrücken. Der Punkt in der Mitte des Stifts markiert genau die Position des Lochs auf dem anderen Element. Breite…
Introduction This model incorporates design elements from https://www.thingiverse.com/thing:3082178 which was designed for the discontinued Meanwell NES-350-24 . I like the design for its simplicity, rear-facing AC/Mains receptacle, and…
***Update Oct. 28 2025*** I now include the stock vtx plate exact replica, STL and STEP files included This is a model of the atomrc penguin's plastic nose that screws on to the front. You can print one in any color to accent your…
printed for my razer basilisk x hyperspeed should be compatible with other mouse from the basilisk serie as well. i suggest to print it standing with one of the hexagon faces from the left side stick facing the printer bed. the one in the…
A MasterSpool for the BambuLab AMS. Use it for Fiberlogy 850g Refill print material
Eckverbinder für Gehäuse mit 5mm Plexiglas... M4 Senkkopfschrauben Corner Panel Joints for Housing with 5mm Perspex
Simple MasterSpool, remixed from E For Extrude to work with CatYarn spools, as well as a generic spool that can be used in a rewinder. Printing Guide You more than likely want to be using Arachne perimeter generation when slicing, if not…
It protects the contacts from being accidentally touched. Snap-on design. Prints without supports. Print Settings Printer Brand: Printrbot Printer: Printrbot Plus Rafts: No Supports: No Resolution: .2mm Infill: 20% Category: Electronics
It´s basically just a remix of the beautiful Honeycomb Filament Sample Spool from kszlachcikowski. The differences are: It prints faster, it has an integrated Filament clip (which doesnt bend the filament too much) and an integrated…
A tool to respool any filament onto this ( https://www.printables.com/model/345540-formfutura-refill-masterspool ) MasterSpool. Required parts: 1x 120mm. M8 Threaded Rod 3x M8 (lock)nut Add a 120mm piece of M8 threaded rod and an M8…
Case for SDRplay RSP1 Chinese clone SDR RSP1 clone description This radios receiver adopts MSI2500 MSI001 scheme, simplified RSP1 circuit, the interface is USB Type-C interface. Effective frequency ranges from 10KHz to 2GHz, 12bit ADC…
This housing is designed for the Raspberry Pi 3B+ and can mounted on the MK3(s) frame. Mounting position is over the Controller and the original screw holes are used. Addional Parts: Raspberry Pi 3B+ 1x Nail (3 x 70 mm) 2x M3 screws…
This was originally a playset I made for my sister's kids. However, it can be used for shop floor planning and layout. I designed the set in TinkerCAD and printed in PLA on my 3D printer. If you want to add realism, the shelves could be…
Hello, this is a Remix/Redesign of Richard Hornes #Masterspool concept. These Spools use much less material an they are easier to handle. Of there size tey will fit on a 200x200 printbed. The Spools can used with every known spoolholder,…
Safely stack the Meanwell Power supplies. This was originally created to stack power supplies in a CG1500 box. The addition of a terminal cover to help prevent fingers or objects accidentally touching live terminals (does not account for…
Star Wars Unlimited compatible Initiative Token - part of a big Tokens Set. Enjoy this promo part of a big Tokens Set. Tokens are high-quality and double-sided. Print them with your resin printer at home, to bring your gameplay experience…
By chance I own a Rosa3D “masterspool” . They sell their refills wrapped around a cardboard tube and (I think) that tube connects the two halves of this spool. Many other refills come without any tube so I made this simple (and very light…
Simple remix of MisterMcDuck's Raspberry Pi Zero case for the MakerSpot USB Hub. My RPI0 already has a GPIO header soldered on already, so I punched a hole in the case to allow them to pass through. Great enclosure, thank you for doing…
Printed in ABS / ASA without support.
Ihr benötigt: 2x bzw. 4x M6x15mm -20mm Schrauben und Muttern 1x M4x20mm und Mutter 2x M8 Schrauben + Nutensteine für die Montage am Rig
Does not damage Slideway lining. Options: front and rear (marked). Need an M6 * 20 bolt and a knob https://www.printables.com/model/371220-festool-nut-knob-thread-m6 Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No…
