Counting matching models…
NEW AND IMPROVED! 23 Dec 2020 I've updated all the files here with newer better dice! I've included supported and unsupported files. These are designed to be printed in resin, if you're doing them in FDM you might want to split them and…
These are all designed to print in vase mode. It's a really quick upload so a couple might be upside down, they're meant to be printed spout-down. :) A few folk have asked me how I made these, so I've uploaded the fusion 360 files to my…
More discussion on reddit, here: https://www.reddit.com/r/3Dprinting/comments/bbzjfd/i\_3d\_printed\_a\_crossstitch\_test\_piece\_for\_a/ And here:…
This is the print file for my fabric printed necklace, that you may have seen on the front page Reddit: https://www.reddit.com/r/3Dprinting/comments/8d9fmt/i_3d_printed_a_floating_necklace/ or Imgur: https://imgur.com/gallery/sA6or Or of…
Thank you for downloads, likes… Enjoy !
Eine einfache Untersuchungsgrube für Modelleisenbahn für den Maßstab H0 (1:87). Das Modell sollte mit Stützen gedruckt werden.
It's the sword from the kazuha's quest.
just a simple add-on part to improve the fit of the phone.
This is a jig to help you punch folios (sets of paper that are to be bound together into a book). The included jig is meant for paper 200mm wide (before trimming), but I've also included the fusion 360 file if you want to edit it yourself…
Dobrý den, Mám pro vás sekeru pro RC auto, jeep, expedici nebo treba diorama. Sekera ma zvlast kovovou cast, pro vetši realističnost. Sekera je tvořeny ze dvou kusu. Tisknuto bez popor Pokud vás moje práce zaujala, odkazy jsou zde:…
Eine einfache Entschlackungsgrube für ein Bahnbetriebswerk im Maßstab H0 (1:87). Die Entschlackungsgrube wurde für das Gleissystem RocoLINE (ohne Bettung) von Roco entwickelt. Das Geländer ist nicht mit dem 3D-Drucker gedruckt (Auhagen…
Ein Schweinchenspiel zum selber drucken. Im Gegensatz zum Original ist die äußere Form pentagonal. Die fünfeckigen Teile sind aber recht groß für einen Ender 3 Pro…passt aber wenn man den digitalen Homunkel vorab im PrusaSlicer richtig…
Ruben Ridley was a character who appeared in the episode "Anatomy Park". When assembling, use glue. **Update 23.12.2022 added full.stl Body.stl can be downloaded here: https://www.printables.com/model/677962-ruben-christmas-decoration
I had some spare Bambu Lab A1 heatbed nozzle scrubbers that I had purchased to put on my Voron and Prusa XL printers. I decided to design a simple handle so that I could have a gentler alternative to a brass brush. This uses the A1…
This headdress is based on the Lodden print designed by William Morris in the late 1800s . You can see it in action here Print instructions This headdress is based on the Lodden print designed by William Morris in the late 1800s . This is…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is a little stencil for making cute flag titles. There are a few models depending on your cell size (the spacing of the dots/grid). If you aren't using dotted paper, you can use any of them. :) Please see the gif for an explanation…
This is a phone mount for IKEA Tertial lamp. It allows you to film in a birds eye view, looking down at a table, with the added advantage of built in lighting. Great for craft videos or streaming lecture notes. These lamps are usually…
It need to be printed with a flexible material like TPU
Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…
This tool allows you to wind embroidery floss cards using the bobbin spooler on your sewing machine, so you don't have to do it by hand. It's a really quick print, 20 mins or less, no support needed. I've also added a version of the body…
Snap-In Tube Holder Wall-mounted snap-in holder for tubes, rods, handles and similar round objects. Included sizes: 18 mm 20 mm 22.5 mm 25 mm 30 mm The holder lets you snap the tube or handle in and remove it again when needed. It is…
This all started with Ruben’s Mini Chips. https://boardgamegeek.com/thread/2951180/ceramic-mini-chips-status-fulfilling-pre-orders-fo/page/1 Then there was a need for trays. I started with a minimalist tray that holds seven lots of 20…
Exact copy of the original. You will need the nut and screw from the original to use it. Better to print with 100% infill
A set of inserts for the 100-chip mini cases from Ruben. You need to print two of the edge channels, and three for the centre rows. The lid still closes, but it is tight. Also available without the sidewalls.
Further discussion on reddit: https://www.reddit.com/r/3Dprinting/comments/bbze8o/i\_made\_a\_key\_card\_so\_i\_can\_keep\_my\_keys\_in\_my/ Print instructions Category: Organization Summary Further discussion on reddit:…
This is a variation of the awesome Hans Gruber (Die Hard) Christmas tree ornament by YourBuddyDinec . The eye of the ornament has been remodeled to be stronger and look a bit smoother. Colors @ 0.2 mm layer height are: Gold (layers 1-13)…
Iconic Movie Villains - Die Hard - Hans Gruber - 1988
I designed this RC rubber duck as a fun and unique project, combining playful design with functional engineering. The model was printed on a Bambu Lab X1C using a 0.4 mm nozzle and Prusament PETG for durability and water resistance. The…
A new 3D figurine generated by AI, a Chibi Rubeus Hagrid (Harry Potter). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the…
A mount that is fix connected on the heatbed. Good for timelapses if you use it in compination with a camera. Modify this mount to your need. The provided long arm camera mount is only an example. Use the Provided base to build your own…
It's silly that we decorate our homes with snowflakes in 40" weather, Let's make some truly Aussie Ornaments! Starting with beautiful gumnut flowers! These were modeled on the “Silver Princess” Caesia flower:…
I accidentaly ordered a bunch of A1 Mini Scrubbers, so wanted to make use of it as brush
Grubenwehr Abzeichen zB. für den Kühlergrill am Auto. Wird zusammengesteckt und mit Schraube und Unterlegscheide am Kühlergrill befestigt. Zur Arretierung sind kleine Nasen angebracht, die leicht abbrechen. Die Löcher im Kreuz etwas…
Leiter für RC Modell Bernhard Gruben oder Theo Fischer Graupner 1:20
Sealing clips to close pipe insulation sleeves -- spony na sepnutí izolace trubek, např. mirelon
How many mechanical components are necessary to lift a marble from the end of a marble run track to the beginning? Well in "Marblevator, Rube Goldberg Style" I added as many as I could to create this Rube Goldberg / Erector Set themed…
Remixed the original into a Hans Gruber version when requested at the LMShow live stream. Skin tone - Start of print Black - Layer 14 (2.8mm) White - Layer 16 (3.2mm) Red - Layer 23 (4.6mm)
Ryobi Shrubber and grass cutting tool attachment holder with the Link attachment at the rear. Please leave feedback! Will require supports, probably printed best in its downloaded orientation.
Nice Christmas decor that lets people know you mean business when it comes to Die Hard being a Christmas movie. 3mf and stl provided I printed mine face down White1 Red2 Green3 Merry Christmas and Yippy Ki-Yay MF See my other Die Hard…
Ruben's mini chips are my "go to" clay chip for board games and 18xx games. I designed these trays to hold 100 chips. There are 5 rows that hold 20 chips each. They hold 28mm max diameter, which is perfect for the Ruben Mini Clays.…
EN: Template for marking the required weld depth of PPR pipes For PPR pipes dia. 20, 25 and 32mm. The collar is placed on the end of the pipe and the depth marked by the edge of the template is marked with a marker. The template contains…
Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…
Měrka pro svařování PP-R trubek (rozvody vody). Dva modely pro trubky: Průměr trubky 20 mm, zasunutí 14 mm Průměr trubky 25 mm, zasunutí 15 mm Osobně jsem tiskl z ASA, ale lze tisknout i z PETG, PLA apod.
1:20 für Fidi Halterungen Bernhard Gruben / Theo Fischer Graupner wird 6x pro Boot benötigt … hatte bei mir gefehlt.
This is a model, which shows beautifully how the caldera erube works.
This is a chip tray I designed to hold my basic set of 100 chips, suitable for most euro games. I got tired of carrying around the original box I had as well as a counting tray, so I decided to merge them into one object. This was made…
It uses 20 magnets with a diameter of 5 mm and a thickness of 3 mm, and 4 magnets with a diameter of 10 mm and a thickness of 3 mm. The 4 side magnets allow the boxes to stay together during gameplay. These magnets should be inserted…
EN: Wall bracket for heating tubes Cu15 Holds tubes firmly by snapping, can be secured with ziptie. Print: PETG 0.6 nozzle CZ: Nástěnný držák Cu15 trubek topení Trubky pevně drží zacvaknutím, jde je pojistit drcpáskou. Tisk: PETG 0.6 tryska
A poker chip tray for Ruben's Mini Poker Chips that are handy for board gaming. Dropping a stack into the slots will group them by 5 to make change easy. I have not had a full test print of this particular rescale, but I have had success…
Designed for the retail version of the game, with cards sleeved in 70-micron sleeves. The "Player Components" models must be printed in four copies. If you like my work, please consider making a paypal payment: https://paypal.me/visar78
Nástavec na barel pro snadnější vylívání kapalin. A barrel attachment for easier to outreach to make liquids more easily
Check out my other Halloween models if you like. Description: I created these cute pumpkin bottle opener in Blender. (This is not an AI model ! ) There are bottle openers for 6 different coins. Each available in 2 versions (single color…
made this by myself for a project . must hot glue to a base very effective. 0.2 layer height
connecting 50mm water pipe (glue) via screw connection to pool filtration
guy on rock with a huge ruber duck beside him so yeah
It uses 20 magnets with a diameter of 5 mm and a thickness of 3 mm, and 4 magnets with a diameter of 10 mm and a thickness of 3 mm. The 4 side magnets allow the boxes to stay together during gameplay. These magnets should be inserted…
Snap-In Tube Holder Wall-mounted snap-in holder for tubes, rods, handles and similar round objects. Included sizes: 18 mm 20 mm 22.5 mm 25 mm 30 mm The holder lets you snap the tube or handle in and remove it again when needed. It is…
I had some spare Bambu Lab A1 heatbed nozzle scrubbers that I had purchased to put on my Voron and Prusa XL printers. I decided to design a simple handle so that I could have a gentler alternative to a brass brush. This uses the A1…
Rubeads prevent drawstrings from retreating into your apparel, and have a unique ‘open channel’ that makes them removable (and applicable) at any point on the string. No one expects PLA to survive a trip through the washer and dryer, nor…
Printed in OVERTURE PETG - Green Grass. Used 3 walls and 25% infill. I would change these settings based on what kind of weight you are putting on it.
Изготовлен из ТПУ 95А, 100% наполнение, слой 0,16, испытания показывают, что он работает.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Stylized 3D printed figurine of Rubeus Hagrid, the…
Fantasy Art - Sorcerers - Rubella the Enchantress 3D printable model.
A Christmas tree ornament with a litophane of Hans Gruber falling of Nakatomi Plaza. It goes over a Christmas tree light and at the same time hangs on a branch above. The building can be screwed on with M2 screws and nuts or glued. It's a…
”Korea.” –Ruben NSFW?🤔 The set includes two full heads, as well as a full model. Christmas decoration from a trash 🍎🥤🦴🧦🍌🥫🦈 Dressed in a suit 🎅 Don't forget to give me a like 🧡 Share photos of your prints 🎅 ❗ 24.12.2023 fixed files:…
Modular Rube Goldberg Machine - Pegboard Edition This fun and educational project is perfect for kids and adults alike who enjoy experimenting with physics and creativity! The Modular Rube Goldberg Machine allows you to design your own…
EN: Simple holder for two pipes or other equipment. To assemble, you need 2 M8 bolts with nut head, 4 corresponding nuts and two sockets. The source file for OpenSCAD is attached. You can modify the model as you wish (hole size, spacing,…
