Counting matching models…
My son needed something to store his second speedcube. I took kevinklie4124's Rubik Cube Stand from Thingiverse, imported it into OpenSCAD, flipped a copy of it by 180 degrees and exported it again. Voilá! For printing I recommend a small…
9x9 rubik's cube. Fully functional and the first on thingiverse. Print it if you have a lot of spare time. And if you do, please post a make. I would like to see how it comes out. Category: Puzzles
A stand for the clock event at the WCA competitions so the clocks are better suited for the surface before inspection.
I used 10% Gyro infill Tree Support Slim, any support recomended
A simple leaf that could hold any cube I put on it. A few months ago I posted the original version of this, It could only hold a Megaminx cube and even then it could only kind of do that. So one day when I was in the mood to make…
Rubik Küpüm için minik bir stand - Rubik Küp Standını SolidWorks - Bambu Lab A1 Combo ile tasarladım ve 3D yazıcımla hayata geçirdim.
Check out the new version that can hold almost any cube. https://www.printables.com/model/1581318-maple-leaf-rubiks-cube-stand This is a quick and easy fall leaf print for your Megaminx cube. I used the following print settings on an…
The main source of smooth rotation is the use of springs and nylon washers in the center parts. The springs also allow the cube to be split apart if you cannot solve it normally. Simply remove any corner piece to disassemble it. To…
Lampada a forma di Cubo di Rubik componibile. Assemblare ogni parte con i magneti https://www.amazon.it/dp/B0CMHHK3BM?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Assicurarsi di montare ogni parte con i magneti in posizione corretta per far si…
This is a remix of the 5x5x5 Rubik's cube by saulquinn, but this one requires no stickers and no glue, and does not need a multicolor printer! You just snap in colored tiles! Turning is decent, though sanding and grease/lubricant helps. I…
A simple leaf that could hold any cube I put on it. A few months ago I posted the original version of this, It could only hold a Megaminx cube and even then it could only kind of do that. So one day when I was in the mood to make…
a cool rubiks cube stand that is made on tinkercad. sorry for the bad photos
A cool collection of pocket sized Rubik's cubes! HAs a 3x3 cube, 2x2 cube and a mirror cube. These are just dummy. They don't turn
Neposedná hračka a hračka pro úlevu od stresu inspirovaná Rubikovou kostkou, kterou lze nazvat Rubikův kruh. Pro tisk ve dvou barvách je nutné dostat každou barvu na stejnou stranu v omezeném čase a bez nutnosti couvání, což znamená, že…
A simple display stand for a Rubik's cube or similar object. Should be simple to modify with text. Enjoy. No supports needed.
Hello, sharing my project of Rubik's Cube stands with text - for cubes 2x2 to 7x7 + project without any text :) Multicolor system is required for stands with text. 🚀 Want to sell prints of my models? Subscribe to my Patreon for only…
Remake from @nuxnik, using 3x Rubik's cube holders, attached to a plate, that can be sticked to a wall.
My first model is inspired by classic twisty snake puzzles from the 1980s (such as Rubik’s Snake). This is an original design and is not affiliated with the Rubik’s brand. Assembly requires: 23× M4 × 12 mm screws (cylindrical head) 23× M4…
The rubiks cube is desgined as 3x3 and it has 6 different colors ie all the standard colors. The cube have small gap between each pieces in order to prevent tolerance. The cube is smaller than the actual standard one so that it can be…
Assembly Instructions Step 1: Insert the edge pieces Hold the core and flex two adjacent center arms slightly apart. Slide an edge piece into the slot between two centers. Repeat for all 12 edge pieces. Step 2: Insert the corner pieces…
Improvement of my previous model: https://www.printables.com/model/157263-rubiks-cube-box-3x34x45x57x7 Added labels to each section of the box as well as holes on the bottom to let you remove the cubes easier. Do a colour change at 2.4mm…
Zum selber gestallten einer Shell für einen Zauberwürfel (Rubik Cube). Diese Shell ist zwei geteilt, somit kann man eine dreier Reihe noch drehen. Für das leichtere Handling habe ich jeweils einen dünnen Magnet 0,2mm Durcvhmesser 10 in…
Replica of original Rubik's cube stand ( 57x57mm) - Replika originálního stojanu Rubikovy kostky
Simple yet elegant base to hold one of you favorite cubes. Inspired by Ionic-style column bases from ancient Greek. I recommend adding some small rubber feet to the bottom to make it non-slippery. Printing : 0.4mm Nozzle 0.12mm Layer…
Simple yet elegant base to hold two of you favorite cubes. Inspired by Ionic-style column bases from ancient Greek. I recommend adding some small rubber feet to the bottom to make it non-slippery. Printing : 0.4mm Nozzle 0.12mm Layer…
Simple yet elegant base to hold three of you favorite cubes. Inspired by Ionic-style column bases from ancient Greek. I recommend adding some small rubber feet to the bottom to make it non-slippery. Printing : 0.4mm Nozzle 0.12mm Layer…
A 5x5x5 rubik's cube puzzle. Turning is ok, but more sanding will help. The stickers for this puzzle are available here: https://speedcubeshop.com/collections/sticker-picker/products/5x5-sticker-picker-new?variant=32287155486833 Print…
IMPORTANT: I designed the pieces wrong so they are pretty small! This my first onshape puzzle, sorry. Print Settings Printer Brand: Monoprice Printer: Voxel Rafts: Yes Supports: No Resolution: 0.15-0.2 Infill: 15 Filament: Sunlu PLA+…
A 1x2x2 Rubik's Cube. Small and simple. Fun to play with. Also had to fix it a little. Print Settings Printer Brand: Monoprice Printer: Voxel Rafts: Yes Supports: No Resolution: 0.15 Infill: 15% Filament: Nova ABS Black Notes: Spray paint…
A fully working Rubik's cube complete with a ring and a carabiner.
15% with gyro infill tree supports hope you enjoy the stand!
a rubiks cube with textures and shapes instead of colors. you can solve it if your blind, or you can solve it without looking.
It helps to mark the shape of the stickers. It is meant to be used with a 0.5 mm mechanical pencil. Sticker size: nominal: 15,8x15,8 mm Stencil cutout: 16,05x16,05 mm. 0,2 mm layer heigth is optimal.
This is a pack of Rubik's Cube stands, which fit standard 56 mm Rubik's Cubes. This package includes 4 variants, based on triangles. Stands are designed to be printed in vase mode. Recommended print settings vase mode: yes extrusion…
If you like my work, please consider making a paypal payment: https://paypal.me/visar78
Če iščete elegantno in funkcionalno stojalo za Rubikovo kocko, bo ta model prava rešitev za vas. Primeren je za skoraj vse velikosti kvadratnih Rubikovih kock, ima moderen in lep videz, zaradi česar je stojalo zelo trdno in stabilno, pri…
This ghost Cat is great for display, or you can use it as a Rubik's cube stand.
The stand consists of 2 parts, the bottom and the top, choose the pattern you like the most. -Material: ~ 10gm -Printing time: ~ 2 hrs -Recommended quality: 0.2 mm -Dimensions: 61 x 71 x 11 mm If you like my work, don't forget to buy me a…
You can display this forbidden apple, or you can use it to show off your Rubik's Cube!
You can display this cute pumpkin, or you can use it to show off your Rubik's cube!
This unturnable Rubik's Cube can be used as a stand for your other Rubik's Cubes!
This star not only looks awesome, you can use it to display your Rubik's cube!
Rubik Küpüm için minik bir stand - Rubik Küp Standını SolidWorks - Bambu Lab A1 Combo ile tasarladım ve 3D yazıcımla hayata geçirdim.
Info: Simple stand for Rubik's cube my son got one cube with a stand (visible on the background of some of pictures), so I modelled the same shape Print info: variants: without bottom holes: no supports needed with bottom holes supports…
On my print for the base I only used infill on the the section near the plate so the bridging would have a surface to lay on. For the sides i used no infill to speed up print and 2 wall the window cuts will add some rigid connections for…
I designed this piece to replace a few that were broken in my original Rubik's Cube 4x4x4. The design has changed since then, so the STL might be of limited value. The scad shows the measurements I've made from a few well-worn pieces, and…
Inspired by a shirt worn by Sheldon Cooper on the Big Bang Theory, I've designed a Melting Rubik's Cube ;) This is a 5 color print for the Multi Material Upgrade 2.0. A single file for manual painting is also included. Print instructions…
Questo originale porta cubo di Rubik unisce funzionalità e stile! Creato utilizzando la stampa 3D, il supporto è progettato per contenere in modo sicuro cubi di Rubik standard (3x3) o di altre dimensioni, con un design accattivante che…
Use this stand to display your cube and watch it spin! Uses one 608 bearing, I ordered mine from here No supports needed, parts are oriented for printing. EDIT: I've also included a larger version for bigger cubes/a more stable stand.
Add a twist to your holiday decorations with this Christmas Tree 1x2x3 Rubik's cube! This compact and festive puzzle combines the challenge of a classic cube with the charm of a Christmas tree shape. Designed for enthusiasts and holiday…
Print in PLA/0.2mm layer thickness or ABS/0.1mm layer thickness for best results.
I took the original model, colored it, and removed some unused parts that seemed to interfere with the print. Then I reordered all the parts, so it's super easy to change colors (to a seven-color print (if you have two AMS'). Printing…
Create your 1x1x2 Rubik's Cube with this simple and fun 3D printable model. This cube features separate, easy-to-print tiles for customizable colors. Usage Print the cube body and tiles separately. Once printed, attach the tiles to their…
Create your 1x1x1 Rubik's Cube with this simple and fun 3D printable model. This cube features separate, easy-to-print tiles for customizable colors. Usage Print the cube body and tiles separately. Once printed, attach the tiles to their…
While thinking about how to make a 100% printed rubik's cube mechanism, i came up with this idea: using rubber bands instead of the springs that usually give the center pieces the ability to spin and mantain tension. (Updated Side piece -…
Rubik's Cube Keychain ! A little keychain for the Rubik's Cube lover Made with Illustrator and Fusion 360 Print setting : 0.2 layer height 2/3 perimeter Can be down/up scaled in X/Y axis. Print slow the first layer and be sure to have a…
Create your 1x2x3 Rubik's Cube with this simple and fun 3D printable model. This cube features separate, easy-to-print tiles for customizable colors. Usage Print the cube body and tiles separately ( Note : Since this is a 3D printed…
Rubiks Cube Stand (Vasemode) Printed with a 0.6mm nozzle (works with 0.4 too but 0.6 is more stable) 0.3mm Layer height 4 bottom Layers for stability Vasemode activated Zauberwürfel Halterung/Standfuß Gedruckt mit einer 0.6mm Düße (auch…
print these amounts of everything 1x core (print at an angle with supports) 6x centre (print on the flat face without supports) 8x corner (print on one of the flat surfaces with supports, recommend printing 1-2 more as it is easy to break…
Assemble the Pac man joints place cube stare until you work up the courage to spend 5 hours solving
This is a Rubik's cube display that is double-sided and you can use it to stack rubiks cubes on top of each other. It makes a great display for Rubiks Cubes or any other cube objects that you want to display. No supports needed. If the…
Just to have a little of fun. The Penrose Cube was original design from Cubes4u
Object description A slim, elegant stand for the Rubik's Cube. You can scale it to your needs. The side length of the open triangle is 35 mm at 100% scale. Recommended print settings: Material: PLA, PETG, ABS/ASA Resolution: 0,2mm Infill:…
Fan of this model? A Like and a Make would be more than appreciated! Showcase your favorite twisty puzzles with this sleek and functional display stand , designed to support any puzzle with a three-sided contact point and a reasonable…
Fully printable in PLA (0.4mm clearance). Needed: 12 “inner_edge” 6 “Track_ring” 1 for each “edge-…-…” 1 for each “corner-…-…-…” Every piece is printable without suppotrs, the only part that could give problems is the “Track_ring”, in…
Supports A Lower Stand and a Rubik's Stand need supports. How to submit this? step 1 step 2 step 3 We are finished!
3 Iterations of the simple basic piramid stand concept. Full, hollow and semihollow
Rubik's edge stand 3x3x1 Perfect for displaying the cube edge 3x3x1
Simple stand for the rubiks slide. Only for use on the cube. I know it looks like it might have other applications but it doesn't. So I'm not responsible forconsequences of using it in any other way than shown in the image.
Printed with ender 3 pro PLA 0.16 mm resolution 0.4 mm nozzle 20% infill Raft (optional)
Check out the new version that can hold almost any cube. https://www.printables.com/model/1581318-maple-leaf-rubiks-cube-stand This is a quick and easy fall leaf print for your Megaminx cube. I used the following print settings on an…
This model is for all the Rubik's cube enthusiasts that are out there! If you have tons of Rubik's cubes just sitting around here's the thing for you, its a Rubik's cube holder plus it allows you to make it look good with some simple…
This is a bead shaped like a Rubik's Cube. The print-in-place design allows the layers to turn on one axis. Print the model in the provided orientation only. No support needed. Recommended 0.4mm nozzle and 0.16mm layer height. Size:…
Show off your favorite cube in style with this 3D printed Rubik's Cube stand ! Designed for both functionality and visual appeal, this display holder is perfect for standard 3x3 cubes , but also works great with 2x2, 4x4, Pyraminx,…
This is a cubing timer which uses an arduino. you can find the code needed to flash the arduino and have it work with cstimer here: https://github.com/BIGGPIU/ts-is-NOT-a-cube-timer--sob You can find a guide on how to build it right here:…
A 3D-printed enclosure with the external dimensions of a standard Rubik’s Cube, designed to securely store a 1 cm³ miniature cube inside. Perfect for display, transport, or just showing off the tiniest twisty puzzle in a big way. No…
Display your Rubik's cube stylishly on you desk with one of these stands. The round stand is designed to be a low profile and simple while the square stand is designed to mimic the look of a Rubik's cube. Both are easy to print with no…
