41 models
This minimalist wall mount holds a Dewalt cordless battery powered pruner. The screws go through the mount point so the tool is secure, can print with petg / pla doesnt matter as long as your screw is into something sturdy.
Camera case for a pi cam with IR blasters. Took inspiration from the great setup that kevinlo designed, however this was designed from the ground up to exactly fit my model of the pi cam, link to Amazon below. This model of the pi cam has…
Ender 3 - Stealthbruner X carriage for MGN12C linear rails. The originial has holes for full MGN12, this is for a MGN12C. Moved the holes around a bit, they are 15mm instead of the 20mm of sepratation they are the same distance apart in…
Replacement clasp for Fiskars bypass pruner. Printed from PET-G, 0.15 mm layer height. If oriented as shown on attached picture, supports are needed only for bottom bridge. PLA should also work, probably with better overhang performance,…
The hand grip is printed with ASA and is smoothed with aceton by spraying. I have used spraying to finish only outer surface of the hand grip, because warping is lower if only partial surfaces are smoothed. The hand grip works also fine…
Fiskars manufactures a line of tree pruning tools with extendable reach and a pull string operated pruner. They are popular and effective pruners and a good value. However, the pull string has to be long enough to function at full…
Bracket to hang the long Ryobi OPP 1820 on a wall. Room for both the tool and the extension pole. No supports needed.
Retaining Rubber Ring, Loop, Band Keeper, watchstrap loop - however you want to call it. I broke mine for my Garmin Forerunner 945 so I designed easy to print replacement. No supports needed. Print with TPU Second version is a bit more…
Wall bracket for Fiskars pruner P521 and all other with similar blade shape. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Filament: Prusament PLA Black…
Помещаем модель на стол. Нажимаем правой кнопкой мыши по модели, жмем "Разделить на модели" Появится сообщение с предупреждением о близко расположенных моделях друг к другу! Ничего не двигаем по столу. Снова жмем правой кнопочкой мыши по…
This is for the Fiskars 14 ft PowerLever Tree Pruner (1-1/8 in. cut capacity). It likely works with the shorter and longer models as well. It is a great tool, but there is not a built-in way to manage the pull rope for the pruner to keep…
This is a replacement part for a Ryobi Pruner, this knob was lost on a tool I purchased second hand and then found out the part was on an 8-month backorder. The Knob is part number 318642001 from Ryobi, this is an original design that…
The locking mechanism on my pruners wasn't keeping them closed anymore leaving the sharp blade dangerously exposed. I modeled and printed a replacement part to rectify that situation. It prints fine in PLA but I would recommend something…
This device is added to a long handled pruner to help hold the pruner steadily and more accurately whilst the user can close the jaws of the pruner more easily. The device slides up the pole. The string of the pruner is attached to the…
This is for horizontal storage of the Fiskars extending tree pruner / polesaw. I make it to hang mine saw up near the garage ceiling out of the way, since it gets limited use throughout the year. Mine is printed in PETG with 0.20mm layer…
PI IR FishEye : Increased lens hole diameter to fit fish-eye lens, reduced overall height for snug fit, and added some additional braces to reduce wobble of the camera when assembled. PI IR Base Widened : Increased cut-out size to…
A functional, wall mount designed specifically for the Felco 2 pruning .
2024/07/23 We improved it and made it even stronger. 2024/8/1 Add a new type
This is a spare part for the extendable rod locking lever of my FISKARS Tree Pruner model. I made it by myself because the original was broken.
Repair part for Pole Saw & Pruner. First insert part#2 on metal frame, then part#1. After that insert metal frame with part#1 in telescopic tube secure with screw.
I made an adapter to allow me to use the two products I posted. The tree pruner and the aluminum extension pole. I believe the pruner was intended to be put on a wooden pole but felt an extending pole would be better. You'll have to add…
Grips for Folding bypass pruner Grips Einhell - Guancette cesoia Einhell Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks Category: Tools
My partner loves these pruners, but found she'd put them in her pocket and end up with a hole. “I think I can do something about that.” This is one of my first designs to solve a problem around the house, and was fun to figure out. The…
I designed a replacement button to swivel the head on ozito (einhell) pole saw, heder , pruner as someone in the ozito group had lost one off their saw.
Just a battery door extention for a Chance Freerunner Blaster.
UPDATE: After several months, my mount failed. So I've added some more strength to the top part of the hanger. And also learned a top for greater strength. This time I increased the vertical walls from 2 to 4. I can even feel the…
Wandhalterung für Felco 2 Gartenscheere oder ähnliche.Habe sie mit 2x Halbrundkopfschrauben Ø4x20mm festgeschraubt
This is a remix/custom of "Raspberry Pi Camera Case and Mount for Mini Kossel" for my personal need in first time with my Longruner Camera Module LSC15 & COM-FOUR vent . I only remix/custom two parts (IR/LED). For all instructions & other…
SUNJOE (Sun Joe) PH3600C Cordless Power Pruners holder wall mount for holding pruners and keeping charging cord handy. Mount with two number six screws 40mm apart. Print as pictured. No supports needed.
I ended up having a lot of tree damage this winter so for the first time in years I had to go find a very long pole saw. I quickly remembered how annoying it was to deal with the rope. Mostly done as an exercise to learn freecad 1.x, I…
Attach a garden saw (tree pruner) to a bamboo stick. You will probably need to make adjustments in the attached .scad file to match your specific saw. I tried to use zip ties but they weren't strong enough. Hose clamps are much stronger.…
rod sliding part for pruning shears the turning part for the pruner rod is broken. designed and printed. PETG. printing Flashforge AD5X
Roof basket for mounting on RGT ProRunner, expanded metal with parametrs 6x3x0,8mm, six M3x16 with nuts needed and 12 screews 6mm needed.
Free sample pack — 3 printable parts: Glove Clip, Hose Nozzle Dock, Pruner Holster Real, tested meshes: watertight, print flat, no supports needed. Designed for standard 1" pegboard but they work fine on French cleat or screwed straight…
This part was made to yield, Not sold separately! (Capitalism?)
This minimalist wall mount holds a Dewalt cordless battery powered pruner. The screws go through the mount point so the tool is secure, can print with petg / pla doesnt matter as long as your screw is into something sturdy.
SUNJOE (Sun Joe) PH3600C Cordless Power Pruners holder wall mount for holding pruners and keeping charging cord handy. Mount with two number six screws 40mm apart. Print as pictured. No supports needed.
I ended up having a lot of tree damage this winter so for the first time in years I had to go find a very long pole saw. I quickly remembered how annoying it was to deal with the rope. Mostly done as an exercise to learn freecad 1.x, I…
Attach a garden saw (tree pruner) to a bamboo stick. You will probably need to make adjustments in the attached .scad file to match your specific saw. I tried to use zip ties but they weren't strong enough. Hose clamps are much stronger.…
rod sliding part for pruning shears the turning part for the pruner rod is broken. designed and printed. PETG. printing Flashforge AD5X
Помещаем модель на стол. Нажимаем правой кнопкой мыши по модели, жмем "Разделить на модели" Появится сообщение с предупреждением о близко расположенных моделях друг к другу! Ничего не двигаем по столу. Снова жмем правой кнопочкой мыши по…
