Counting matching models…
Within the cultural tapestry of the Red Sith, the ceremonial flint knife holds a pivotal role as a revered artifact in the intricate rites of passage known as "Vein Racing." or in some family lines as “Sithlume Ascension” This ceremonial…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
V2 version updated added 2/19/2023. Adds a LOT of detail, print comes out much cleaner now.
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
I originally designed this canister to hold my Flexcut carving set. But I quite like this model actually and want to use it for a bunch of other things. It's kinda shaped like a chunky peanut butter jar… and will look like one too if you…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Dagger Pendant: Styled after Iron age Bone Carvings.
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Standing figure of Harihara carved from a single slab of buff-coloured sandstone. Date: 1000 (circa). Found in India, possibly from Khajurāho (north). Now located in The British Museum. Photos taken in November 2018 with a Sony a6000 and…
Print approx. €10.86–€13.28 excl. taxPreliminary estimate for one variant
This tool has to be assembled. The bearing is not necessary, but you can use it if you want. For the assembly: Take the “Carving Disc” and insert the bearing. (if you are using one) Then take the “Disc insert” and hammer it in to carving…
Print approx. €6.50–€7.94 excl. taxPreliminary estimate for one variant
20 Tabletthalter Für Schnapsgläser Serviertablett ca. 24 cm lang, 19 cm breit, 3 cm dick, Loch: 3.8 cm. Bitte beachten Sie, dass der Bodendurchmesser des im Halter platzierten Glasbechers weniger als 3.8 cm betragen muss Mehrzweck – Das…
Print approx. €15.34–€18.75 excl. taxPreliminary estimate for one variant
Print Tips Material: PLA Layerheight: 0.15mm (BALANCED) Perimeters: 3 Infill: Lightning Support: Yes (Automatic)
Print approx. €8.12–€9.93 excl. taxPreliminary estimate for one variant
Material: Gembird - Black Pla Layerheight : 0.2mm IS (Structural) Support: Yes (custom or automatic paint) Infill: Lightning (for filament save) Perimeters: 3 (for durable)
Print approx. €7.70–€9.41 excl. taxPreliminary estimate for one variant
3d model of a Kraft brand Macaroni microwave dinner bowl, and a 3d printable lid that snap fits to the bowl. Intended to support waste reuse.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
I have a set of small carving knives purchased in Japan many years ago. The set came with flimsy little plastic sheaths for the blades, but to be honest these were so thin that they added no safety. Knives stored in a tool bag were always…
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
Snacks serving bowl with waste compartment Print instructions Straight forward print, no supports needed. Print in two parts. Can be scaled.
A great interlocking tray with three tiers for snacks, pastries or cakes. Something like this should not be missing on any table. :) The standard dimensions are: 34cm height and the three shelves 20cm, 16cm and 12cm. It can be skaillered…
6 Color HueForge model. Aztec carving filament painting made using Sunlu and Esun PLA+ colours. Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear) Filaments Used: Sunlu PLA+ Black Transmission Distance: 0.6 Sunlu…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop 🏆 To celebrate the win I've added Low-Profile Legs that reduce the height 5cm! 🎆 It's Lazy Susan Mode!! 🍰 MMmmmmm This is purpose-built to make icing a breeze. Retaining rings…
6 Color HueForge model. Viking Wood carving filament painting made using Sunlu and Esun PLA+ colours. Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear) Filaments Used: Sunlu PLA+ Black Transmission Distance: 0.6…
Just another snacks serving bowl with waste compartment but now also with integrated phone stand! Please use LIKE button if you download and consider a tip :o) Thank you!
Krishna (/ˈkrɪʃnə/IAST: Kṛṣṇa) is a major deity in Hinduism. He is worshipped as the eighth avatar of the god Vishnu and also as the supreme God in his own right. He is the god of compassion, tenderness, love and is one of the most…
Ape Monkey Butler perfect for home decoration and to impress all your friends. Please message me with any questions. Thank you for your support.
Hueforge print of a Zeus stone carving, with a bit of an optical illusion effect. Total height of the STL is 3.5mm. Print at 0.08mm layer height, with 0.16mm base layer height. Filaments Used: Overture Matte Black Sunlu Grey Overture…
Carve details into your jack-o-lantern with this pumpkin carving saw. Intended for detail work - use a metal kitchen knife to make deep rough cuts. An easy print that does not require supports. Curved handle with a hilt protects your…
This is how I made it: https://www.instagram.com/reel/DB3rtkrAmC9/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Using a saw for carving a pumkin can be much easier than using a knife. I designed an ergonomic handle for a t-shank…
This 3D model is a single-serving supplement container designed for convenience and portability. It features a dual-screw lid system, allowing for easy dispensing and refilling of nutrition supplements such as protein powder, pre-workout,…
Hunter carving knife from Monster Hunter World. Extras: 2 x #4-40 x 3/8" Bolts from Bolt Depot 2 x #4-40 x 5/8" Bolt from Bolt Depot 1 x Nylon Paracord in Royal Blue from Strapworks Finished Shots Completed Knife Complete Knife 2 Custom…
Model fixed fixed in blender and makeprintable for 3d printing. orig: "Borre Viking - wooden carving (from depth maps)" (https://skfb.ly/6WTqW) by Mario_Wallner is licensed under CC Attribution-NonCommercial-ShareAlike…
A 3D scanned Buddha stone carving made with Agisoft Metashape for the photogrammetry process using more than 200 pictures to capture the intricate detail of the stone model. The real carving is around one meter tall. Shouldn't need…
These tools are designed to print fast with no supports, so if you forgot to buy pumpkin carving tools, these might just save the day! They can be scaled generally to any size and should work somewhat well, although I have not tested them…
Pumpkin knife handle for using any T-shank jigsaw blade. There are two halves and a small key that sits in over the blade to keep it secured. One half uses heatset inserts: short #6 32tpi The other half uses 1/2" pan head #6 32tpi pan…
This is a remix of https://www.thingiverse.com/thing:3272290 I made changes to the sizes so that the sheath fits flush on the knife and added other sheaths for other knifes. BeaverCraft wood carving sheaths. You should rotate the items in…
Update: After testing this print I recommend using a stronger material than normal PLA. As stated before, use a kitchen knife to make initial cuts . You can also scale up on the z axis to make the whole tool thicker. It is plenty sharp…
Timeless parametric (many sizes) model of various étagères to choose from. A perfect addition to the nutcracker model (which is also nice and easy to print). - highly print-optimized. - each form ca be easily split in slicer to remove the…
Halloween pumpkin carving tools The idea of this was born in my mind, when I saw the competition notice. Hopefully many will like it! This can be useful for those who aren't so handy, but they want to make better looking halloween…
There are several designs available: Jack-o-Lantern (classic) Dia De Los Muertos Circle Face Spider Oval Opening Heart Suspension Bridge The candle holder versions will have a space to place a tea light candle. The versions without this…
Chudo created a serving jig for nochs and bow string services. He calls for a M6 screw and nut. This remix provides those parts. Use paper clip wire for the thread bars. Here is Chudo's original that I remixed…
4 Colour ‘Filament Painting’ model - Samurai Warrior Carving, made using Bambu filaments. (I recommend the following speed settings for the bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal…
The model fo laser cut is adapted for polypropylene with a thickness of 1.6mm Original model: https://www.instructables.com/Homemade-Glasses-With-Laser-Cutter/…
A bowl designed in the shape of the leaf of the Nothofagus gunnii (Tasmania's deciduous beech or Tanglefoot). It's intended for CNC carving, but is also suitable for printing. Use a low layer height to keep the bottom of the bowl smooth.
Printing Instructions Profile: Any profile should be adequate, though the smaller fangs may benefit from a higher quality setting. Supports Needed: Supports and brim are required for the large fangs, brim only for the small fangs.…
its a High detailed sculped Mirror objekt for 3D milling
this is inspired by the original carving tool for dremel, see picture. it is very simple, and require an M6 bolt and nut. You also find a cover for the M6 bolt that can be glued in place Print as you like - no support
Zeus and the Giants This was printed with a 0.2 nozzle, which produces 0.04mm layers a little nicer. It is possible with a 0.4 nozzle, though you will need to have calibrated your printer and filaments very carefully. You can however,…
Have Fun whatever you use it for
Fruit fly trap for a Weck preserving jar (80mm lid). The jar should contain something that attracts the fruit flies (e.g. old fruit, water/vinegar mixture). The fruit flies follow the smell through the funnel into the jar, but then cannot…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Blue Gray PLA…
Scale to your need Have Fun for more details subdivide and sculp
This is the Serving Robot from Atomic Heart in Pose Category: Art
I would suggest all top surface ironing, which will double the base time, but makes it look nice, supports shouldn't matter in most cases. Happy printing :D
This Brio and Ikea compatible reversable piece of track swerves one track width to the side. I have included two lengths. The 150mm (6 inch) piece is about as short as it can be while still having the curves be gradual enough to allow…
Sept 2023 Update: Improved Design Now Available Here: https://www.printables.com/model/586801-improved-replacement-drip-tray-for-the-grp1060b-4- Somehow lost the drip tray/catch pan for my 4-serving George Foreman Grill (GRP1060B).…
A 3D scan of a wooden totem carving from Belize. The print profile contains a cut version that stands up well with a flat back and bottom
FIXED Set of 18 Pumpkin Carving/Cake icing Stencils Easy to Print Each 1 Prints in around 45mins on my P1S. 240mm x 200mm x 1mm
This stand can hold 5 Pfeil tools and with the mounting plate can be hooked onto the wall. The holes are made for tools with approximately a 12.8mm diameter collar. The wallplate is intentionally taller to allow for command strips to be…
Serving Taco Tray. 4 Tacos on one side, and 3 on the other side. print sideways without supports.
Disclaimer: I am not going to be held responsible if you overserve yourself while using my scoops. According to people in lab coats, 400mg of caffeine is the recommended daily maximum intake. One serving of caffeinated Gamer Supps…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Black Matte PLA+ Brown PLA+ Coffee PLA+ White Swap Instructions: Start with Black Matte At layer #6 (0.56mm) swap to Brown At layer #10…
I have been using the original version of this tool for many years with some cheap backups which do not fulfill my expectations. So I created a modified printable version of my favorite. It can be used with plastic nuts with embedded M5…
Kufic Script Serving Tray or Plate *Roughly translates to “Eat More Peaches” *No it does not. I have no idea what it says… so if you know how to read Arabic Kufic then please let me know if it is NOT COOL. For those interested this…
3 simple masks for your pumpkins - make it easy to transfer the designs to the pumpkin and then outline with a pen and cut out. Resize by altering the scale on your slicer plate! Print with tree supports and 0% infill The printed images…
Please note: I am using a filament profile with a Flow Ratio of 1.045 at 255 °C for first and 265 °C for other layers. Part cooling fan > Keep fan always on is OFF. I just printed another insert and realized it was too small with the…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA PolyTerra Earth Brown Transmission Distance: 0.3 PLA JAYO Gray Transmission Distance: 2.5 PLA…
Drink Mix Packet Dispenser - Single Serving - With View Port
HueForge Stone Carving created for the Polymaker Nature Color Set . Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Nature Color Set : Panchroma…
Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my projects, often in advance of publishing the models. https://www.instagram.com/smackmax_/ Spacy Serving Tray, A serving tray…
Prints with no supports and holds together strong. Handy carrying hole. Scalable decoration for serving or display. Created in Tinkercad like most of my geometric models!
A collection of‑printed reliefs inspired by traditional woodcarving. Each piece rises softly from the background, capturing quiet emotion and sculptural depth. Clean lines, natural flow, and a calm visual presence create a modern…
T shank jig saw blade holder with internal blade storage. use two M2 x 12 hex head screws and two M2 hex nuts. Designed for Pumpkin carving but has variety of hobby applications.
Router base plate with handles used for when carving patterns using your router. The handles should make it easier to guide your router when doing intricate detail on carving wood. Uses M4 countersunk screws, of which you will need 2 for…
There's an ongoing trend with the Arch / Dune pattern, including floor rugs, serving trays and much more. This print will provide you with a basic dune pattern in the form of a serving tray. It's suitable for A1 mini, with a size of…
This model is compatible with the lego system.
Simple little handle to turn your jigsaw blade into a pumpkin carving tool. Just 2 m3 screws and nuts. I haven't printed the one piece handle, but it should work in theory. For a full handle just add two halves to your print bed and…
Party serving bowls shaped like a flower. For dry food only. Make sure you enable vase mode as the petal is repurposed from another project I’m working on and Shapr3D was being uncooperative. You should be able to fit five or six petals…
Tamar over at 3x3 custom has plans for a great geometric puzzle serving tray. Part of making it requires the use of templates to either transfer directly to a timber piece from a paper printout, or making MDF templates first for re-use.…
Serving Plate Heart - Valentines Day You can use the option in the slicker Fuzzy Skin (PrusaSlicker)
Starving bridge troll Category: Toys & Games
Three linked hearts with a 1mm wall thickness. If you need a different wall thickness, send me a note and I can shell a new model.
This unique serving dish features a beautiful winged design that brings a touch of nature into your home. The flowing curves and detailed feathers create a sense of movement, making it more than just a functional piece; it’s a statement.…
We all know the problem, we have a slightly more curved piece of filamet that doesn't really want to go through the extruder and into the heating block. So far, our only two possibilities have been: Poking around until you finally hit it…
Snack serving tray with 3 compartments, can be used for: Snacks, chips, crisps, dips, candy, chocolate ... Reminds me of Allegra-Perle :D Files: AP-Bowl.stl AP-Bowl without sign.stl 3D PRINTING SETTINGS Recommendation: Layer height: 0.32…
Print the wing in two colors. Load wing grey and black together. If you don't have two color printer glue the black part into place. The pins do need to be glued in placed and pushed into the pumpkin. Select your window and scale to the…
This is a jig for a router you can use to quickly carve inclined fan rays into a wood surface, to add a decorative element to your woodwork. It comprises templates, which attach to the work piece with clamps, and a routing ramp, which…
the modell can be printed in 0,2layerheight use scale for your needed size Have Fun
This is a statue of a man carving a statue. He is carving the bust of a woman and, given your printer's resolution and the size of your print, she can be seen quite clearly. Nice beginning of a strange loop...
"I drink coffee for your protection" on a curving name plate with a coffee emoji next to it. Some supports required.
upd: added the c2 cap Here some woodcarving knife sheaths for BeaverCraft S15 Whittling Wood Carving Kit. The knife included in the kit are: BeaverCraft C2 BeaverCraft C6 BeaverCraft C15 BeaverCraft C16 The sheaths should fit these…
Wanted to make a bit more room so increased the width from 2 to 3 and spaced out for both a serving spoon set and forks.
I somehow how misplaced the drip/grease tray from my 4 serving Foreman grill. Without the drip tray, the Grill is unusable. By design, when frying hamburger or other meat on the grill, hot grease flows safely off the bottom edge of the…
Mini platter / low-sided bowl / serving dish - whatever you want to call it, with stand. Great for holding nuts, grapes, candy, biscuits etc. Multiple uses of course, not just for food. Note: If you use this for food, be aware most…
Sensory play preserving jar tray
Upgrade your kitchen organization with these Gridfinity-compatible Shadow Boxes designed specifically for silverware and serving utensils . This modular system brings the ease of Gridfinity storage into your kitchen drawers, cabinets, or…
This is a pasta measurer I made for a Flying Spaghetti Monster (FSM) celebration that the Humanist Society of Greater Phoenix (https://hsgp.org/) puts on annually. Probably best to use PETG for this but PLA works too. The file…
Replacement for broken knife holder. Thread M6. Printed with PLA. BTW: Cura says that the model is "not watertight". This can be easily repaired with Cura's Mesh Tools (Cura Marketplace) or Meshmixer. (I had the model repaired with…
Put your Moomin tableware on display with this Moomin Arabia serving bowl Ø23 cm display stand.
a simple holder for carving knives
dowels with a diameter of 8 mm inserted into holes drilled in the working surface serve as stops. gears and threaded pins are left-handed, respectively. and right-hand threads, which allows only one gear to rotate. uniform pressing or…
Description This is a jig for a router you can use to quickly carve linear patterns of inclined shapes into a wood surface, to add a decorative element to your woodwork. It comprises a linear ‘rail’ template, which attaches to the work…
Four years ago I started brewing kombucha but wasn't happy with just a towel on the top. Once a fly managed to get in the jar, so I decided to print a better solution . Since four years the print is still in use and had never ever…
testmill on ureol /Hard Foam 100x100 1hr used a R2 Ballnose Have fun to put your writng inside See the other CNC stuff i made g-code by blendercam
Keeps a set of 6 handled chisels safely stored and organized in this box. Should fit most chisels that are .9 inches in diameter on the handle or less and 6 inches long. Has a lid to hold them inside when not in use. Box dimensions are 6…
This is a holder for T-shank jigsaw blades. It is suitable for blades with thickness from 1 mm to about 2 mm range. All the Bosch jigsaw blades I have fall into this range. I'm publishing this model ahead of Halloween. I hope this can…
Here is a fun little weekend project to get you or your kids into playing with CAD software by making your very own custom designed jack-o'-lantern. To start you’ll need to download a free copy of AutoDesk Fusion for Personal Use, if you…
![Christmas Tree 4-Tier Serving Tray [No Supports]](https://media.printables.com/media/prints/7b58500e-a7d9-4e40-93d9-0f792846a900/images/11155491_645f8426-eba7-4d18-bb12-7c9ff27408ba_7fdbde5c-21ea-45ab-84a4-c94c9cf97000/2025-11-13-133239.jpg)
