Counting matching models…
Please click if you appreciate my work :) The power of a classic meets rebellious tuning – presenting the RWB Porsche 911 (964) Turbo as a wall-mounted 3D print. This model embodies the aggressive style of Rauh-Welt Begriff, reimagined as…
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
I recreated the design of well known [BRAND NAME] plastic anchors, making one side of the thread flat for easier printing. I used 100% infill to maximize strength, but you might achieve sufficient durability with a lower infill setting.…
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
This model is free and took a lot of work to create. If you appreciate this model, please leave a download and a like. If you print this model, please post a make! About this model This functional walking stick is created from a 3D scan…
Cute narwhal as a piggy bank. No supports needed!
I made these as I could not find any openly available models. This is a low profile/low drag alternative to the original Qysea Fifish Propeller protector. Example pictures show prints made in draft mode (0.3mm layer height) for rapid…
Brändi Dog Erweiterung für 3 Spieler - das Brettspiel wird eigentlich immer zu viert gespielt. Mit dieser Erweiterung kannst du das Spielbrett auf 3 Personen anpassen und zu dritt - alle gegen alle spielen. Print Settings Printer Brand:…
Stackable, holds 16 Featherweight bobbins measuring 7.5x22mm, fits inside Model 68 cabinet
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
Print your own 1:492 scale model of the legendary Concorde, the world’s first supersonic passenger jet. Capable of cruising at Mach 2.04, the Concorde could fly from New York to London in under 3.5 hours, cutting typical flight times in…
Gardena union nut (custom thread) sparepart for garden shower. Sparepart from Gardena: https://www.gardena.com/de/produkte/sparepartscategory/009540010217/ Gardena Überwurfmutter (spezielles Gewinde) Ersatzteil für Gartendusche Ersatzteil…
This is a very easy fixture for the Dyson Airwrap. You can use it to attach the Airwrap to anything in your bath- or dressing room. The printable file includes both parts. The lower part is tilted by 15° and printed inclined. Using this…
found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG
Ständer für Handschuhe, dadurch lassen sich gerade die Torwarthandschuhe sehr gut trocknen und lüften!
Modeled up this adapter to use the EGO 765 Wall Mount on my Gladiator GearWall. Hardware: 1 x M4x10mm 1 x M4x18mm 2x M4 Hex Nut Screw holes are 55mm apart.
This calibration cube has a chamfer on the edges and no letters on the sides. Advantage is, that you can precisely measure it with a caliper. After the print you have to write the axis on it with a pen. Size is 20 mm by 20 mm by 20 mm.
Rohrhalterung mit wiederverwertbaren Kabelbindern für Hydroponik-Anlage mit 6,3 cm Rohrdurchmesser. Damit können höhere Pflanzen vor dem Umfallen bewahrt werden. Um in meiner Hydroponik-Anlage auch höhere Paprikapflanzen aufziehen zu…
I offer a set of parts for holding the phone more securely. New parts are fully compatible with original parts. The presented set includes two arm.stl options (for a large phone in a case and for a thinner phone) and two options for the…
I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…
Für Rundmagnete 8 mm x 3 mm
Auf dem Deckel ist das Symbol und der Titel eingeprägt, sodass durch einen Farbwechsel auf Höhe 0,5mm das Symbol farbig hinterlegt werden kann. Die zweite Variante kann mithilfe der MMU farbig ausgedruckt werden. Im Boden der Dose ist die…
Here's a christmas deco version of Wrecking Ball. Printed on mk3s+ It prints just fine with the new Snug Supports - but do be careful when removing the area around the bells in the front. xyz Dimensions: 55mm x 63mm x 50mm
Replacement for broken tupperware airhole cover
Hier das Model zur praktischen Lagerung der einzelnen Karten. Die Karten findet ihr unter Wewölfe vom Düsterwald hier bei Printables. Gedruckt mit Prusa PETG in der Druckeinstellung schnell, alles Standardeinstellungen
I used a 6 mm metal rod I had lying around and redid the round part as well to make it fit well… editable flies included in case you need to adapt in some way…
This is a wonder woman art wall mount. There are 2 models: one is divided into parts and can be glued together (for the big version in the photo) . The second one is a smaller version that can fit on mk3s plate.
The source marked this model as adult content.
mostní podpěra pro autodráhu typu Hot Wheels bridge support for a Hot Wheels track
Bremsgrifferweiterung für die Shimano Saint.
Ausschnitt/Relief der Stadt Bigge/Olsberg - NRW - Germany
Underware is the universal, open-source, modular, extensible and re-usable solution for managing cables, mini-pcs, usb devices…pretty much anything, anywhere! Watch this video to find out more: Key Points Open-source design - The whole…
Holder for Tupperware lids (for kitchen organisation). Big and small versions. Should fit most kinds of lids, but obviously YMMV. Can be printed without any supports if your printer can handle a little bridging (I printed the ones in the…
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf? It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of…
Millennium Falcon Scale 1:500
A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…
Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…
Cute spider on a web in the corner on his print-in-place web. Space for (4) 12mm (1/2") magnets to stick to a metal door frame, or just tape/command strip in place. Mine also stuck to the metal corner beads of unframed openings at my…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Fan made Star Wars chess set. Made with my students in class (grade 8). We used existing models we found online to create chess pieces out of them in tinkercad. Some are exceptionally good, some could do better. But somebody else might…
This is the openGrid adaption of the Underware system by Hands on Katie . The channels can be directly snapped onto the openGrid base board - the lite board version increases print speed and reduces filament usage. See my introduction…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Create your own DT series Sentry Droid and take over the galaxy! Description: This is a KIT CARD of a DT series Sentry Droid. After a long time I felt like designing a kit card again. This will be a great gift for friends who love Star…
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
Japanese pattern bookmark (5 patterns + STARWARS pattern) Recommended settings are : X:30mm Y:60mm Z:1mm ＜In order from the top left＞ ・Asanoha Pattern ( Nezuko Pattern from Demon slayer ) → It contains the wish for the healthy growth of…
Tupperware lid holder for 12 lids.
Version 2 of the Airwolf model. This model is based on the basic design by Hans Meyer at Grabcad, remixed, STL's fixed, updated, missing parts added. The front fuselage needs to be printed heavier (30% infill) as opposed to the rear parts…
This is a customizable silverware holder that fits your specific silverware like a glove. No more sloppy generic buckets. As an added feature, it can stack with other gridfinity modules to make even better use of the drawer space. Note:…
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
''I'm a one-man apocalypse.'' I present you Roadhog in his tuckered out emote pose. Roadhog is one of the heroes in Overwatch. He is a bodyguard and an international criminal who is infamous for being an unforgiving cutthroat with a…
Model of the Elder Wand from the Harry Potter series. This is a 2-part wand which goes together without magnets or glue. The joint isn't noticeable. The assembled wand is 15" / 38cm long. .02mm layers 2 walls 15% Infill The print profile…
The Unicorn of the sea now comes you a printer near you! This cute little narwhal comes in three different styles: Alone - They are just out here catching some sun living their best life On a rock - Relaxing on a rock trying to do their…
MechWarrior Online Timberwolf, roughly 130mm tall. Fully articulated, and tested, all parts should be 100% printer friendly and error free. Most of the joints are the same as the Articulated MWO Timberwolf by 7Fish (…
this whistle contanis major improvements compared to my V29.1 whistle. please be careful and use it responsibly. The whistle responds very easily due to an improved labium. It provides lesser air consumption aswell I built in reflectors…
This is one of the toroidal propellers we've tested in this video: https://youtu.be/w90gM7bGdvk This is the right propeller. To get the left version, simply reflect it in the slicer. We've achieved the avg max speed of 2.26 m/s, at 1079W…
EDIT ------------------------------------------------------- 2023.08.10. On request from Chris Ondrovic added frame parts without side ventilation (holes only on front side) 2023.03.26. Added STL for Alu profiles caps. Printed from…
Good results without any support-structures. Print needs 25h with a Creality Ender 3 S1 Pro and 60mm speed (via Klipper). Because of the enormous number of edges, you should do some fine-tuning in optimizing the speed at corners and the…
Summon the Spirit of the Frozen Sea – the Arctic Narwhal! 🐋🦄❄ Rising from the icy depths beneath shimmering auroras, the Arctic Narwhal glides silently into your world. With its elegant spiral horn and smooth articulated body, this…
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Thanks Black Tie, that worked a treat ; ) Hopefully this is what your after : ) I sharpened one with more defined lines and left the other smooth, so your choice : ) As always check the sizing suits your needs and post some picks if you…
Here is Kiriko Kunai from overwatch 2. I have split the knife into 2 parts and added 2 2mm holes for alignment. For stuff like this I like to use 2 pieces of filament. Im not sure the true scale of her kunai, but they normally range from…
A while ago I saw an extruder indicator consisting of a hamsterwheel and a silhouette of an hamster in it ( https://www.thingiverse.com/thing:3139180 ). I re-designed the wheel from scratch, took a pikachu model from Thingiverse (…
Erweiterbares Model von ikea Skadis. Durch eingeschränkte Druckgröße habe ich das Ikea Skadis als erweiterbares Model erstellt. Man kann den Skadis Organizer so lang wie man möchte machen. Benötigt mindestens jeweils 2 x Ecke 1 2 x Ecke 2…
I created this modular drawer organizer to maximize space in my drawer as compared to a store bought one. The total length was too long for my ender 3 print bed so each tray is split in half and joined together using a piece of 1.75mm…
Dive into the depths with this groundbreaking 3D printable underwater torpedo! Powered by a revolutionary rubber band motor encased within its sleek design, this torpedo boasts toroidal propellers for unparalleled aquatic maneuverability.…
This group of models was inspired by Gridfinity_1x5x6Utensil.3mf by clarkwgriswold on Thangs.com. His did not fit my silverware well, I wanted more depth, and his only had a fork/spoon holder - I wanted a whole set, so I designed my own.…
Tesla Cyberwhistle with actual whistling action. Not the most efficient or loudest whistle you've ever used, but it works. Calling this the “Twhistla” after Simon Giertz's Truckla Tesla car conversion.
Fusion360 custom thread profile for soft drinks bottles (PCO-28 spec). Unzip to \Users\ {USERNAME} \AppData\Local\Autodesk\webdeploy\production\ {NEWEST FOLDER} \Fusion\Server\Fusion\Configuration\ThreadData Note: You'll need to change…
English: Expandable pot lid holder. Each print is for 2 pot lids. There is a start piece ("Topfdeckelhalter_Anfangsstueck.stl"), a middle piece ("Topfdeckelhalter.stl") and an end piece Length: 131mm Width: 140mm Height: 100mm Towers…
Shelf/holder for Dyson Airwrap. Can be used as a stand or hung on wall.
Spiderweb Layered Fidget 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill No supports needed, print in place. Dimensions of Spider Web Layered Fidget: 4 in. in diameter x ⅞ in. tall I do not recommend scaling the…
My wife needed a way to securely hold her Airwrap attachments and wasn't finding anything she liked here or for purchase so I designed and printed these. I hope they work for everyone. I printed the shelf with the hooks on it's back with…
This 3D model was originally created by Scott Yu-Jan and OVERWERK. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769. This remix of the model was made to fit the iPhone 14 (without…
Cute spider on a web in the corner on a string. Space for (4) magnets to stick to a metal door frame, or just command strip in place. Mine also stuck to the metal corner beads of unframed openings at my house & office. Blank or “black…
This is a simple wall mount for our Dyson Airwrap and one additional fan outlet. Due to request I've added a double-version for 2 fan outlets. Havent tested the big one myself, should fit any standard (Ender)-sized printer with a 220mm…
Lego Feuerwehrmann / Lego Firefighter
A 3d scan of a replica of the ancient greek sculpture “Nike of Samothrace” also known as “The Winged Victory of Samothrace”, a masterpiece from the greek Hellenistic era (around 200 BCE). The original resides in Louvre, Paris. Scanned…
This Time i modelled an UNDERWATER POSE ! This was a request from a good friend who wanted to print some Poses. --------------------------------------------------------------------------------------------------------------- But do you…
After finalizing the DB KÖF-II locomotive succesfully (https://www.printables.com/model/181942-db-kof-ii-gauge-1-132-45-mm), I challenged myself to design the Dutch alternative to this German shunter. This is the series 200-300 of the…
May the 4th be with you! At MiniWorld3D we celebrate Star Wars Day of May 4th with a model inspired by Jabba the Hutt's Palace & Fortress in Tatooine, as seen in Episode VI: Return of the Jedi, and The Book of Boba Fett. Jabba the Hutt…
Mikrofonhalter für Motorola Funkgerät Feuerwehr 0,2 Layer Wall 4-5 45% Infill 4 Untere und obere Schale
Stormtroppers, Darth Vader, The Mandalorian and R2D2 wall decorations. Easy print. Interested in more themes? Subscribe to the club for additional designs inspired by gothic, nature, and fantasy aesthetics, from mythical creatures to…
Three vertical structures for organizing tupperware lids (IKEA) in kitchen drawers. There is one for round tupperwares, one for rectangle ones, and one for the small square lids. The ikea tupperware lids stack onto each other, and the…
Fits iPhone 13 with case and supports lightning cable charger.
This is a 3D model of a diffuser attachment designed for the Dyson Airwrap. Ideal for those looking to experiment with new accessories for their Airwrap, this model helps distribute air more evenly to enhance curling and drying…
My wife wanted to be able to store multiple lids between dividers so I increased the space between dividers, increased overall length, and added some octagons in the dividers to reduce filament usage. Total length of print is just over…
This is a remix of Stinkfoot71's Feast For Odin & Norwegians insert . I also modified nizmox's vikings tray and island tray . Here is an imgur album so you can see the pictures/assembly in better definition. My goal was to lay out the…
I present the Widow's Kiss ! This the iconic sniper rifle carried by the Widowmaker in Blizzard 's acclaim game, Overwatch . This prints at 1:1 scale and DOES CONVERT (yes, you read that correctly) from the assault weapon out to the full…
Hier das Feuerwehrlogo für Colorchange Farbdruck. The german firefighters logo for colorchange.
I paint it with PrusaSlicer for using it with Prusa Multi Material Printers. All credits to https://www.printables.com/@FunkyArt_274361 Thank you. The frame you will find here:…
Voici une version améliorée du robot motorisé AT-AT Starwars. Un grand merci à Ltdan ( https://www.thingiverse.com/thing:1083338 ) pour la mécanique que j'ai conservée en ajustant simplement les jeux entre les engrenages et à Morbihan (…
Door Hooks (expandable) Hooks for the door, which can be expanded as desired with the connectors. The dimensions of a hook can be seen in the pictures. There are three connectors, which allow a distance between the hooks of about 35, 55…
Needed a Tupperware (Snapware) Lid Holder with a low base to fit in our cabinets. Cuts down a bit on material and time to print too. Can place double sided tape or rubber feet under the plastic feet to help stop it from sliding on the…
Decorate the frames of your doors
Feel free to use these files however you would like, just give me a shoutout!
