Counting matching models…
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
check out the other versions Here we have an easy to print and easy to store Bottle Dryer System you can choose from 3 diffrent types of dryer (the Straight Version is better for small mouth bottles and cups) 2 diffrent Holder a version…
The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…
I really like 🥰 the PolyDryber boxes: The overall concept is great, the form factor is perfect, it has a cool design, …. but there are some design flaws that need to be fixed. 😉 But don't worry, you can do it! 😎 Remark: I designed the…
The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…
Remix of the box to have an indent that makes it slide in place even with installed AMS reinforcement clips. For me no resizing was necessary. AMS reinforcement clips The AMS reinforcement clips were introduced by BambuLab as a quick…
So I just received my new Sunlu S2 Filament Dryer and it had the chance to be better than my current favourite, the Eibos Easydry. It gets hotter internally and heats evenly from all sides. There are however two major design flaws that…
I remixed the box to have a snap-fit lid and vertical holes for less bridging. I added a new version that takes inspiration from the Galactic Empire. (I was bored and have not had a chance to test print)
check out the other versions The bottom of this version is flatter and straighter, making it easier to place bottles, mugs, cups, etc... on it we have 4 versions Version 1 simple it works but for me it is a bit too shaky Version 2 more…
Tired of broken wall mounts? Meet the wall mount your PolyDryer actually deserves! If you're like me and love your PolyDryers but found yourself frustrated with the original wall mount being difficult to use (and worse, breaking over…
I wanted a Drybox that is as affordable as possible without compromising on features! There are already many designs out there that use the well-known cereal box as a basis, but none of them met all my criteria. I wanted to change that.…
Mount your lovely 🥰 POLYmount (or the original PolyDryer wall mount) directly to the 🤩 openGrid wall organization system with these handy directional snaps ! Two snaps attach to the upper and lower mounting points, perfectly centering…
This desiccant container fits inside the Creality Space Pi (single-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a double-spool…
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
I LOVE the modular design of the PolyMaker PolyDryer. However, one thing it couldn't do over my previous setup was dry two filaments at the same time. Well, now it's totally possible thanks to the Double Barrel Mod . Print this mod in…
check out the other versions it's bigger it's more stable and it's expandable here the latest version of the bottle dryer in different versions this version is taller and wider than previous versions i added a dovetail connector system so…
Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…
A quick printing funnel to aid in filling the desiccant holder of the Polymaker PolyDryer Dry Box. Balances the holder when filling, quick to print, oriented for proper printing, print in any material, no supports needed.
This desiccant container fits inside the Creality Space Pi Plus (double-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a single-spool…
Most 3d printing filament dryers have a fundamental flaw: they heat the filament and pass air over it, but they are a closed system with no venting, so moisture escapes only by accident. With single piece dryers, fixing this is intrusive…
fruit washer and drier. small and large. can also do vegetables.
Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…
A little friend for the kitchen! happy printing ;) You should also try v2: https://www.prusaprinters.org/prints/43601
Update 2023.11.18: I've added a Fusion 360 paramaterized model of the side walls, so everyone can mix and match the design to match their specific food dehydrator. It has been only teste for certian combinations, so the model still may…
I hate hanging up socks. This makes it a little better.... For the hexagon look, simply set the bottom and top layers to 0, perimeter 3. Hexagon infill 15%. For more stability it can of course also be printed normally.
Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…
This is a remix of scmake's dryer https://www.thingiverse.com/thing:4579574 . I loved the aesthetic of the original but found it was a little unstable with a bottle fitted and scaled down prints for small bottles were too fragile to be…
Wall Mounted Holder for Dyson Supersonic Hair Dryer. Need to prepare some magnets, please refer to the following URL link for specifications.…
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
Mashup of Jevermeister's https://www.prusaprinters.org/prints/116779 and EveningNewbs' https://www.thingiverse.com/thing:4855279 PTFE Guides for the SUNLU FilaDrayer S1 filament dryer. I wanted a PC4-M10 fitting, and Jevermeister's…
The Airlock Dock & Stacker slide onto the lid of the PolyDryer™ Box and are held with a friction fit. The airlocks can be press fit into the dock and are also held in place with a friction fit. The Stacker version allows you to stack…
CZ: Tento držák PTFE trubičky jsem navrhl jako řešení pro bezpečné vedení filamentu ze sušičky do podavače Snapmaker U1. Umožňuje vést PTFE trubičku v kontrolovaném radiusu, takže se neláme, nekrčí a nezpůsobuje zvýšený odpor při podávání…
This is an extension piece for SilverCrest food dehydrator (SDA 350 A2) bought from Lidl Finland in 2019. Apparently this also works with a similar looking 2020 dehydrator model from Aldi Süd (Germany) according to a comment . I made this…
To change you need to use Solidworks 2022 or later
If you own a Sunlu S2 filament dryer, then you probably know that the lack of a fan prevents the humid air from being properly circulated out of the box. One of the simplest ways to get around this is to crack open the case a bit during…
This improved version is designed to prevent the filament from falling off the roller when the filament material is exhausted and to roll well without resistance. Some parts of Multiple Mechanism Auto-Rewind Spool Holder have been…
Update v2 (Sep 14 2024): Due to popular demand, version 2 now features vertical grill vents and removes the arrow tabs on the cover. While version 1 works for most, some encountered printing issues, which this update addresses.…
Two models for SUNLU S2 Dryer that can hold variety of things needed to be dried such as renewable silica and more. Thinner model is as wide as standard filament roll of 1.75mm 1 kg. Wider model is as wide as it can be, to fit nicely…
Update 04/14: Revised design to have a flush bottom eliminate the need for supports if you have good bridging capability :) Vertical drying rack for one or two scrub daddy sponges. The grove on the bottom matches my sink but included the…
Was able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports. I recommend printing with a…
Adapter plug to convert the 6mm inlet on the PolyDryer to fit 4mm OD PTFE tubes. Now it's possible to directly feed from the dryer with a fully constrained reverse bowden setup. I have included the step files, so you can modify it to suit…
Remixes Available for other Food Dehydrators: Silvercrest 350W / Quigg 350W Food Dehydrator: https://www.printables.com/model/494734-2-spools-filament-dryer-for-silvercrestquigg MisterChef® Professional Food Dehydrator, 250W:…
Two of these fit snugly in the lid of the plydryer box. When loaded with desiccant they will not fall out and installed they leave room for the filament roll to spin freely. To make the mesh on the lid you must use a modifier shape with…
a better friend for the kitchen! Print instructions Regular Pla, no supports. 100% scale. Happy Printing!
This adapter allows the replacement of the rubber grommet for the 4mm PTFE tube with an M6 pneumatic fitting to avoid the PTFE tube from being pulled into the dryer. Update 4/19/24: I noticed that the adapter will loosen up after repeated…
so fun to print and use but support may be needed
With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easily removable. You need to remove the…
Narrower remix of the original box to fit the AMS 2 Pro.
I thought that instead of buying an additional box, you could simply print a better one yourself! My box is not only compatible with the Polydryer, unlike the original box it is also stackable, has an improved closure, a slot for labeled…
Description : Sovol dryer is perfect but the underside gets very hot. This holder protect the support and help to dissipate heat. re-use original pads hold in place without glue Version : V1 (deprecated): - Perfect for my dryer V2 : - Add…
Wall mount for the PolyDryer™ Box. Printed in 2 parts the wall mount attaches with 2 screws and the PolyDryer™ Box is fixed with the 3D printed clip. Print Wall Mount with >4 perimeters.
First things first; make sure you have a filament that is suitable for the max temp of the dryer (70°C according to Creality) plus a margin to account for the heat being greatest at the back near the exhaust vent. Any filament with a…
Description This is a modular herb dryer/dehydrator with stackable shelves and sliding trays. This dryer uses passive airflow to dry out herbs gradually and doesn't require a heat source or electricity. Instructions Printing This is a…
When using SUNLU drybox on top of IKEA Lack enclosure, to make the filament traction smooth I created a filament guide adapter to be used with the lower hole on the case. This was inspired from https://www.thingiverse.com/thing:4833453…
Dryer rack that fits like a spool inside your Sunlu Filadryer S1 Plus/S2. Gaps are 1mm wide so your Silica Gel beads wont fall through. Works well with bags and loose beads. Depending on what material you print with you can crank up the…
This is a simple hair dryer holder for the bathroom. So my wife don't have to put it away every time and the cable won't become a dreadlock again :) It can also be used as a cup holder Print Settings Printer Brand: Creality Printer: Ender…
I am using the Sunlu Dryer for storing and using my filament. But the simple hole for letting the filament out is not enought. To fix this I designed an adapter to connect a pc4m10 or pc6m10 (conical) pneumatic connection. The hole being…
I updated the Shaft and Nut in addition to improving the Sunlu Dryer I made previously. You can check the improved Sunlu Dryer from the link below. https://www.printables.com/model/247479-sunlu-dryer-s2-mod
I liked the idea of the original but because of all the small holes it takes forever to print. This version uses horizontal slots in the sides and also an interlaced bottom, making it print in about half the time of the original. I also…
Tiny Part, Big Upgrade – TPU PTFE Adapter Hey maker! 👋 This small TPU adapter makes a big difference: Features: Replace your old PTFE piece with this adapter. Insert a standard 4mm PTFE tube, held securely by friction. Quick, tool-free…
Creality Space PI dryer Spool holder • Print the Cap NUT and Centre part and then L and R side support • I did on K1C So did in two prints • I used all standard settings without supports • Creality Hyper PLA • 2 X bearings required 8x19x6…
PolySnap (it.. - and now in style) - the more easier and efficient wall mount for the PolyDryer -- Update 03.2026 The PolySnap is a mechanically optimized wall mount for the PolyDryer, designed with print orientation, load paths and…
Its a fairly easy print. Box and a lid separate. I have designed it for 0.6 nozzle. (But other size nozzles will work) 0.4 layer height works great. You'll need to drill one 4-5mm hole at the back of the lid to fix the box in. How to best…
This is an enhanced print bed filament dryer based on Design Prototype Test's video on the topic seen here: https://youtu.be/H1DoJxY6v_U . The air flow has to make a 90 degree turn at the top and bottom, so I used a velocity stack for the…
The output is tangential to the coil which allows the filament to unwind much more naturally than with the original output. It is necessary to glue the part with a heat resistant double sided adhesive, this avoids screwing the part and…
Plug for securely holding the end of the filament spool when sealing the Polymaker Polydryer box opening. The plug does not protrude above the top edge when installed in the lid. Compatible with 1.75mm filament. The hole in the plug end…
Hydra Compatible 4.1 Model updated for Errors in model that someone reported bambulab 2 row desiccant holders, this works with a hydrometer and sits behind it as well in total you can fit 5 inside, 6 without the hydrometer and you do not…
Designed to plug the EIBOS Filament Dryer exit holes. Keeps moister from entering after drying. Easy print no Supports or Rafts needed. Print at 0.15mm layer height with 15% Infill. Print Settings Printer Brand: Prusa Printer: Prusa Steel…
Sunlu S2 Filamenttrockner PTFE-Schlauch PTFE Tube für Filament, was sich in alle Richtungen bewegen kann, kann erstellt. der Adapter nimmt einen PTFE Schlauch 4x2 mm auf. Dieser wird ca. 5cm ins innere geschoben und ca. 10 cm bleiben…
My wife asked to design and print this thing for her, so I did. Printed with ABS to be heat resistant. Layer height - 0.2, infill - 5%, 2 walls. Add massive inside and outside brim. No supports needed. Print test ring first to test if it…
It looks like there is room to put a fan on the back panel, but this was much easier. Update: New version stays on dryer and doesn't fall off. Update 2: Filament guide version
Apologies for the photo, the models have moved on. The photo shows a 1:1 scale silhouette of the House Targaryen ornament and the House Stark ornament at 82% and 140% in height with fuzzy skin. Also attached is the source file for Fusion…
Simple ring extension for a food dehydrator which makes it usable as a filament dryer. Suitable for a 32 cm diameter dehydrator. A 90 mm wide spool fits inside the dryer with one ring extension. The rings can be stacked up to get a higher…
This is an improved guide tube for the eSun eBox filament dryer. The original one is made with rubber and can not hold the guide TPFE tube firmly. I break one, thus I create a enhanced version of it.
It needs to be printed on some material that can withstand up to 70 degrees Celsius without deforming (it will be in a dryer box that reaches that temperature). I have used PETG I've added a new GIF showing the assembly process. I think…
This is a shortened dryer lint vacuum attachment to clean out lint that gets past your dryer lint trap. I just did it on my Samsung dryer and got a little bit out that looked kind of old so I'm glad it's clean in there. I used my older…
Enhance your Sunlu S2 filament dryer's performance with this breathable silica gel desiccant box. Designed to perfectly fit inside your Sunlu S2, this box needs no additional hardware or modifications. The box is designed to hold either…
A stackable bottle dryer I initially made to exactly fit Soda Stream bottles, but of course works for all kind of other bottles too. Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany ,…
Use any material you like No supports needed *Edit: I opted for a looser fit, it has no play but if you would like a snugger fit let me know.
Tired of shoes cluttering your entryway or taking up precious floor space in your closet? Meet the ultimate 3D-printable shoe hanger : the simplest, most effective way to organize your footwear and speed up the drying process. Whether…
Print in PETG and enjoy.
I started by looking through the glove dryer designs already on printables.com. I found some nice features that I copied, particularly the raindrop shaped openings. But none of the designs had a rectangular base and a central funnel to…
iDryer Unit: DIY System for Drying and Storing Filament Project Description: The iDryer Unit is an open-source system designed for drying and storing filament, created specifically for 3D printing enthusiasts. The device allows you to dry…
I used 4x 32x8mm 30kg magnets with 4x M5x20 screws. But you can remix the step to your needs.
There are similiar models out there but all of them lack a proper drying area for the bottle lids. The “hook" as I call it, has a slight angle to it so that the lids don't fall off. Prints superfast. If you appreciate my work, please…
I re-made JBE's remix of the original connector by Phil-ip with the following improvements: Regenerated from original model without using re-meshing, avoiding geometry noise. Added internal taper to lower part of M10 thread, eliminating…
Simple hanger designed to be attached to the wall with two screws. Can be printed without any supports.
A simple Wallmount for the Dyson Hairdryer
A simple bottle dryer to plug together and save space in the closet. Based on the v2 design of https://www.printables.com/model/382554-bottle-dryer-system-v2 - only slightly higher with wider feet, so that even larger bottles (including…
Those who pre-ordered the Sunlu FilaDryer S2 quickly discovered you need to prop open the lid slightly to release humidity. I've been using a simple binder clip but decided to design a part to do the trick.
Dyson Supersonic Hair Dryer Stand With Attachment Storage 2x Din 988 45x55x0.5 (neds to be glued in place) 2x Ruthex M4 short 1x Ruthex M4 2x M4 x 12mm (countersunk screw) 1x M4 x 8mm (countersunk screw) 0.4mm nozzle - 0.2mm layer height…
Printed top-side down, without supports, and a brim to assist adhesion. See also Funnel for Spool Desiccant Carrier .
Wasn't happy about drying Desiccant in our oven which is used for food, so I made this box for our Polydryer You turn the top to dry or empty the container as you can see in the pictures. Printes i PLA. 15% Infill 0,2 layer hight
Holder for hair dryer. I put it on my wall with power strips. It can hold both the dryer and one loop of the cabel. Print instructions It's printed with PLA. It's working over a year
This is a remix of SUNLU dryer holder for Prusa MK3s. I used the original model for almost a month and it got the job done. I decided to flatten out the holder so the filament rolled better. I also added spacer blocks instead of using zip…
Printed in M3D matte Lavender PLA on my MK3s+ at .2mm on a .6mm nozzle. Attribution: Hair Dryer and Straightener Holder created by drabisko.
Upgrade your kid's doll playset with this adorable mini hair dryer! Designed for dolls like Barbie®, this hair dryer brings new fun into your child's play with its doll. It prints fast with minimal supports under the handle, so you can…
Simple part adaptation to work with the Elegoo Centauri Carbon, unfortunately its too large to print on the CC so hopefully you have a larger printer as well. Requires 6 heat inserts to attach the side, Fits 4 8x3mm Magnets to help secure…
