1,564 models
A plant pot inspired by the perfect structure of bismuth crystals. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review…
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant
This model was uploaded on makerworld but did not work with prusaslicer very well. I painstakingly repainted it for 2 color mmu printing on my Prusa XL. Enjoy
Print approx. €10.15–€12.41 excl. taxPreliminary estimate for one variant
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop No supports needed! Scale as big as you want! Made from red/gold silk https://www.amazon.com/gp/product/B08QN2PCG1/ and blue/silver silk…
The pot is inspired by the structure of old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
We are for sure big fans of crystal structures here! So… Here is our newest model inspired by the great growths of Moon Crystals! We hope you enjoy it! Used Filament: This model was printed using ROSA 3D PLA-Silk Navy Blue The ROSA 3D…
Print approx. €9.83–€12.01 excl. taxPreliminary estimate for one variant
An Simple modern plant pot and planter for your plants. Inspired by an elegant crystal structure. Best to be printed in 2 or 3 layer vase mode settings - Printing material PLA or ASA Happy printing!
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 0-2% Perimeters 1 No Supports needed Scale it as you like :)
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
A pot crafted by accident that turned dark… Nah it is just a regular plant pot, but it looks pretty cool! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
Prints very easily in vase mode :) Any material you want Happy printing!
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…
I always intended to make many iterations of my mini heart-shape box , but I didn't really have the skills to do it without enormous pain (we all know what it is to work on fusion360). Now that I can model stuff more efficiently, it was…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
A simple to print iceberg crystal. Great for dioramas and DnD games or for testing your printer. Prefered print method is vase mode. I used PLA filamment. Happy printing!
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Snake Wrapped Around Crystal Ball
Print approx. €14.35–€17.53 excl. taxPreliminary estimate for one variant
Nice and oryginal looking crystal printed with 0.4mm nozzle and tricolor PLA. Supports needed (I recommend using organic supports).
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Magic “ice” crystal decoration with space inside. You can either hide something inside or use it as a unique vase or just home decoration. We provide version with removable “secret” cap and also non-removable version - so you can…
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
Disclaimer: This project was a work of passion. Please do not monetize it . Make it for those who are close to you and your loved ones. Thank you. PS: You are more than welcome to build upon this project. For example, I would love to see…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
🇬🇧 – English – A collection of 34 snowflakes for decoration purposes, with a silhouette design. The same snowflakes with hanging loops are here . 🇨🇿 – Czech – Sněhová vločka 34x jinak stylem “obrysová”. Stejné sněhové vločky s očkama na…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
A cool-looking crystal cluster with optional Lego compatibility! The Lego-compatible version has a slot on its base that can be placed on a 2*2 Lego block. The standard version doesn't need support, while the Lego-compatible version needs…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
A variation of the Sierpinski Pyramid, reworked to have 7 sides. Recommend slicing with 0.3 mm layers to get best optical properties. Use translucent PetG. 1 perimeter, 0 infill, 0 top layer, 0 bottom layer. Add a height modifier near the…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Please click ❤LIKE❤ if you appreciate my work 😊 This stunning vase combines the symbolism of nurturing hands with the raw beauty of crystal formations . Two sculpted hands gently cradle a bowl , while crystals emerge from the base , as if…
Print approx. €27.99–€34.21 excl. taxPreliminary estimate for one variant
Fotka: Mapa je na A4.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Valvetrain components organizer made for Chrysler/Dodge/Plymouth (Mopar) Big Block engine. May fit other pushrod OHV V8 engines. Check the measurements in 3D-file.
Print approx. €7.81–€9.55 excl. taxPreliminary estimate for PETGSource material: PET
If you're a cold-water diver, you most likely have a drysuit. And if you have a drysuit, you most likely have experienced the joyous feeling of that cold trickle running down your arm, back, neck or leg. The easiest way to detect a leak…
Print approx. €29.46–€36.01 excl. taxPreliminary estimate for one variant
Dial up your favourite beverage and keep your table safe from unwanted mess with coasters!! I am definitely not the originator of this idea but I gave it my own spin. The Stargate coaster was something I came across in 2015 and I found a…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant
Crystal Puzzle I recently found this puzzle in a drawer while cleaning, I got it a long time ago as a child. It was already quite worn out, so I modeled a new one. It is a challenge to have good dimensions and tolerances , the parts must…
Print approx. €4.50–€5.50 excl. taxPreliminary estimate for one variant
Wide Push Button for SodaStream Crystal 2.0 I created this push button for people who may not have as much strength in their fingers (anymore) and thus have trouble pushing the standard button on the SodaStream water bubbler . With the…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
The Chrysler PentaStar button
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
If the part is printed upside down, no support is required. For the rubber seal, I recommend seal for a 1/2" water pipe from a hardware store measuring 24x34x2mm. For example, like this one:…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
The 3mf file included is designed to fit my home's candelabra sized lightbulbs and the base, which SCREWS in. I've included a base standalone file so you can see if thats the same and the crystal by itself, both hollow and solid, so you…
Print approx. €6.98–€8.53 excl. taxPreliminary estimate for PETGSource material: PET
This must be my 3rd of 4th instalment of Dynerys Targaryen. Well lots of options anyway.
Print approx. €3.46–€4.22 excl. taxPreliminary estimate for one variant
Kyber Crystal Crate : Rogue One : Star Wars Will not open.
Print approx. €12.46–€15.22 excl. taxPreliminary estimate for one variant
share crystal from the neptunia series renders https://www.artstation.com/artwork/JebEoA
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Valvetrain components organizer made for Chrysler/Dodge/Plymouth (Mopar) Slant Six engine 170/198/225 cid, 2,8/3,2/3,7 l. V8 organizers are available readily but not for small engines, so I had to make my own. Model is really crude. It…
Print approx. €4.83–€5.90 excl. taxPreliminary estimate for one variant
Made to fit a 4300 mah 3s lipo battery in a TT01
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
Tryska a rukojeť - bez podpěr s límcem. Tělo - podpěry všude a větší límec. Výplň 100%, kvalita 0,20 mm STRUCTURAL, materiál PETG. Pro správnou funkci je potřeba tělo trysky opatřit “O” kroužkem 14x3 NBR a po připojení na hadici použít…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
Daenerys Targaryen Bust. Experiment with multiple layers of displacement. Added DT2.obj. Second Attempt with much deeper 3d effect with the depth map. But If you check out the side view you can see the obvious downside. Note To Self: I…
Print approx. €4.64–€5.68 excl. taxPreliminary estimate for one variant
A variation of the Sierpinski Pyramid. Recommend slicing with 0.3 mm layers to get best optical properties. Use translucent PetG. 1 perimeter, 0 infill, 0 top layer, 0 bottom layer. Add a height modifier near the top and set it for 100%…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
If the headlight-motor continues to run in the up or down position or if the headlight lids will not rise or seem to rise erratically, this could mean, that the rolls in the motor are history. For that case, you can repair that motor by…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
This is the core of a variometer (also called a vario coupler) used in radios from crystal type to the early vacuum tube radios. I strongly recommend using a filament with no pigment, as many pigments interfere with RF signals. Print…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Add flavor to your dishes with the natural beauty of a quartz crystal shaped salt shaker. This model is designed to be printed in vase mode. One should print 4mm of bottom infill; that is 20 layers at 0.2mm layer height. Print with larger…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Crystal Bowl *Advanced* This model is for advanced users only! Printing: The crystal bowl is printed with two separat perimeters. A different stl-model is used for each perimeter. The inner part object is scaled to 99,8% in x and y. It is…
Print approx. €18.44–€22.53 excl. taxPreliminary estimate for one variant
Contains the full model and a version broken down to be able to be printed in four parts that fit on a 200x200mm print bed. The first file fits on the left side and the second fits on the right. I printed this in glow in the dark PLA to…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
*Englisch Below* GER: Die Glasflaschenhalter Befestigung meines Sodastreams ist gebrochen, darum habe ich ein Ersatzteil entworfen. Kann je nach Genauigkeit des Druckers richtig herum oder über kopf gedruckt werden. Passt möglicherweise…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for PETGSource material: PET
Klíč slouží k povolení, nebo utažení matky na bazénu Marimex
Print approx. €8.16–€9.97 excl. taxPreliminary estimate for PETGSource material: PET
Slouží k vyšroubování vnitřní trysky pro vložení zátky (na zazimování bazénu)
Print approx. €5.73–€7.00 excl. taxPreliminary estimate for PETGSource material: PET
This is the "breadboard" base for a crystal radio, similar to that from the cub scout manual 60 years ago. It has a thinner base than V1.0. See below for videos on construction. CRYSTAL RADIO VIDEOS How To Make A Crystal Radio - No…
Print approx. €5.09–€6.22 excl. taxPreliminary estimate for one variant
Approx. 70mm tall and 41mm in diameter. I printed it in translucent orange PLA+. Great little addition to bathroom decor and to dim a bright light. Set with a 3mm brim and 25% infill. Adding supports on the inside will certainly help,…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
A variation of the Sierpinski Pyramid, reworked to have 5 sides. Recommend slicing with 0.3 mm layers to get best optical properties. Use translucent PetG. 1 perimeter, 0 infill, 0 top layer, 0 bottom layer. Add a height modifier near the…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Crystal pots for stabilized moss and more
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Basico Control3D Black PLA Sunlu Meta Grey PLA+ Esun Bone White PLA Basico Control3D White Swap Instructions: Start with Black At layer #8…
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant
Here is a 5-sided box that will hold 5 of the small 4-sided Fairy Crystals. The center windows allow light to come through the tops of the crystals. The side windows display the base of the crystals with the “Crusaders Cross” aka “Cross…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
A small crystal display for your desk or table. (Also I might make more models that are compatible with this one)
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
These are components used to make the classic Cub Scout crystal radio with wiper arm. It includes 2 pillow blocks for a 2" PVC pipe/coil, and pedestal upgrades for the wiper arm. CRYSTAL RADIO VIDEOS How To Make A Crystal Radio - No…
Šuplík pro trisky. (Creality ender 3 s1/pro/max).
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
2x2x2 unit cells of a diamond crystal structure. Instructions Print with paint-on support for the two overhanging carbon atoms. Use a brim. Rest prints okay-ish without support, but needs some cleanup. Model is designed for Prusa XL and 3…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
Replacement shift linkage for the 2003 Chrysler grand Voyager
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Stojánek na trysky - Nozzle stand
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Organizer for 2 x 3 print nozzles. Nozzles are screwed into the board. Organizér na 2 x 3 tiskové trysky. Trysky se šroubují do desky.@
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
These are components used to make the classic Cub Scout crystal radio with wiper arm. It includes 2 pillow blocks for a 2" PVC pipe/coil, and pedestal upgrades for the wiper arm. CRYSTAL RADIO VIDEOS How To Make A Crystal Radio - No…
These are components used to make the classic Cub Scout crystal radio with wiper arm. It includes 2 pillow blocks for a 2.5" PVC pipe/coil, and pedestal upgrades for the wiper arm. CRYSTAL RADIO VIDEOS How To Make A Crystal Radio - No…
I am not the original author. Published here as a make. All credits go to M. Solar and N. Trapp, J. Appl. Cryst. (2018). 51, 541-548 Link to the paper: https://doi.org/10.1107/S1600576718003291 Follow the link above for an interesting…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
úložný prostor pro trysky
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
I am building a section of the PiBeta calorimeter to do a fit check for some parts to go inside it. The pentagonal shape is what the rest of the hexagonal pieces are arranged around.
Print approx. €18.24–€22.29 excl. taxPreliminary estimate for one variant
My daughter is totally into Nijntje again, made of svg and merged it with a plate in thinkcad. Used Ex 1 for white and Ex 2 for black 0.20 structual and 15% infill.
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
I'm an amateur radio operator and have installed a 50w VHF/UHF mobile radio in the retractable storage bin that's embedded within the center console of the 2023 Chrysler Pacifica. This fan mount replaces the removable cup holder and…
Print approx. €4.17–€5.09 excl. taxPreliminary estimate for one variant
Stojan na trysky PRŮŠA v krabičkách - PRŮŠA nozzle stand in boxes
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
This custom scooper is designed specifically for the PetSafe crystal litter box system. The scoop geometry is tailored to fit directly into the narrow waste collection valley where the automatic rake deposits cat droppings, allowing users…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for PETGSource material: PET
The arbor press by Macshay is an excellent model, and I needed to make some fittings for use in the watch modding function. This model is for pressing a standard 31.5mm crystal into the case for Seiko Dive Watches. While this was designed…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Dune Crysknife Of Paul Atreides Gcode has split knife upright with dowels and organic supports.
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
A very modernistic flower vase inspired by natural crystal structures. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
UPDATE 12.09.2025: I modified the tail so its no longer fragile and should stay connected with dragon. Caution is still needed, when removing dragon from the build plate. To be safe, wait for the bed to cool down and carefully remove link…
*** Free to print, NOT to sell *** For Commercial Rights, you must join my Club. Dec 15 - Informed there may still be an issue with the links sticking. I will correct this this weekend. Until then, just Split the model into parts or…
No need for any supports, however it has a large overhang with its crystal horns which is a good test. It will take time and I do recommend a raft or brim to be added for maximum bed adhesion and it must be taken of easily otherwise the…
This is a remix of a crystal dragon, which fixes the first two elements after the head (they are merged together and not movable in the original model) Features Articulated Looks best in Rainbow PLA Recommended print settings Layer…
Second vesrion of articulated crystal dragon. Improved joints and overall srenght of the print.
A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D
reupload of my articulated dragon model, dont use brim
In oldtime, when people couldn´t make spears yet and the nights were darker than your frightening imagination, Crystal Dragons ruled the world. They flew without fear through the world. They loved magic crystals that gave them invincible…
crystal snake, dont use brim dont print small
This fully articulated crystal dragon is very entertaining and sturdy Print settings You can scale this up as much as you like as long as it fits on your printer. I would recommend a raft but it isn't necessary, I would also recommend…
Crystal Switch Dock Platform
Here is a fun but larger project to build an opening lightsaber. Most of the many parts I used to make this version were modified from other designers, mostly CaseStudyno8 . Also from Dogbert's emitter remix and timmy_d3's remix . It has…
I really liked collecting lego crystals when I was a little kid so I decided to make a jumbo sized version of it. It looks really nice on a desk or shelf. There are three sizes to choose from. I haven't printed the largest one but I'm…
Articulated LIzard with crystals. dont scale down
🟦 Zetor Crystal 8145 🟦 !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. TIRE UPDATE - If you choose to print this update, don't print these parts black 15 by MrHanjak…
This is my next dragon. A few of the other ones I made were not very flexible, so I made this one extra flexible. When printing on an a1 mini, you can make this 33 inches. I haven't tested this, so if you print a dragon max size on a…
"Articulated Crystal Dragon by Saber3D" had a few versions, namely the original and an "Updated" set of models that has better/thicker connecting rings. The "Updated" models would not load in PrusaSlicer with the correct multi-material…
They model is available in different sizes: 100 %: ~ Height 10 cm 150 %: ~ Height 15 cm 200 %:~ Height 20 cm Of course you can scale it as much as you want, if needed. ;) You can print it with 0% infill, but always use 2 or more perimeters.
A cood dragon size it as you please! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
A LED mini nightlight that changes colour is used to illuminate the crystal light by fitting inside the printed model. The mini nightlight was obtained from a large on-line shopping website, quite cheap. UPDATE includes a modification to…
Zbrush sculpt. Hair was simplified so it should print fine. Have fun.
Following on from his Fire Dragon, please below https://www.printables.com/model/365346-articulated-fire-dragon My 15-year-old son decided to experiment with new effects in Blender and came up with this amazing looking crystalline effect.…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Download the Wall Version- https://www.printables.com/model/420380-crystal-wall Get the single cluster here https://www.printables.com/model/417129-crystal-cluster Crystal…
I remade the model
Changes: I was getting feedback that the tail was very delicate and you needed to be careful while pulling it off the build plate. And it also looks kinda wonky with the small head and massive arms. So I upscaled the head and tail parts…
A sudden disappearance of 4 hours of my life. I painted the Crystal Dragon in Bambu Studio, hopefully saving you some time. I recommend printing with flushies, and also printing 2 at a time. Would not recommend scalling down. Flush model…
A quick and straightforward print to test your 3D printing clearance / tolerances.
🇺🇸 Welcome to New York City! This entry includes 3 versions : • Regular, single model • Multi-material version, for use with Prusa MMU, BambuLab, Mosaic Palette, or similar • Lamp version, hollowed to allow lights to shine through This…
