54 models
This design snap fits to the ice cube bin inside the freezer drawer of the LG model #LFXS26596S refrigerator. I don't know if other LG models share the same bin and configuration. Print settings: I printed with PETG; I suspect PLA would…
Print approx. €3.10–€3.78 excl. taxPreliminary estimate for PETGSource material: PET
Galaxy S26, S26 Plus and S26 Ultra cases. Print in TPU of your choice with SNUG type support at 30 degree overhand threshold. These models are based on official 3d models from Samsung and have 0.2 mm clearance around the phones. To…
I just got my new Samsung Galaxy S26 Ultra in the mail. Just like I did last year with the S25 Ultra , I measured and modeled my own to share with the community. What makes this model special? I've included the .F3D (Autodesk Fusion) and…
🛡 Protezione Ibrida Definitiva per Samsung S26 Ultra Proteggi il tuo Samsung S26 Ultra con questa custodia ibrida ad alte prestazioni, progettata per offrire una protezione superiore senza rinunciare a stile, comfort ed ergonomia. Il…
Die Beiden teile helfen einem bei der Montage von Kolben und Zylinder von Stihl Motorsägen. Das Kolbenringband ist für Kolben im durchmesser 44mm und 44,7mm. Das teil in "u" Form hält den Kolben an ort und stelle wärend man den zylinder…
Thank you for checking out my Samsung S26 Ultra Arc Slot Case ! If you print this case, I'd really appreciate it if you could upload a few high-quality photos of the printed case with your phone installed . Your photos will be used as…
A Stl quad-lock phone case
Hello, If you like the Thing please leave a like. This OSVAC Adaptor is made for my Metabo BAS261 Bandsaw. Maybe the Adapter also Fitts other Metabo Bandsaw Models, please tell in the comments. Category: Parts
Just hoping to get used :(
Couldn't find one so I modeled one. Thin case, may use for some experimental modular stuff later. Stay tuned.
This is a phone holder designed for the Samsung Galaxy S26 Ultra. It is made to mount to the top of a table, desk, nightstand, or headboard so the phone hangs off the edge and can still be plugged in to charge. It can be mounted with a…
I work in a shop environment, so I wanted a softcase that had a fairly decent amount of edge cushioning. This printed well with pretty standard slicer settings. I enabled normal support and gyroid infill. You may need to run an exacto…
Strong and easy to print. Resistente y fácil de imprimir.
Sonoff S26 is a very good smart socket based on ESP8266, which can be easily reflashed with many existing pogo pin adapters. But this year (2021) a new version appeared: S26 R2 with a newer chip ESP8285. As a result, the PCB layout has…
Features - 1.5mm screen bump for better screen protection - 1mm camera distance for camera lens protection - 2mm thick rim for more rigid rim protection - separate buttons for better tactile feel and customization - patterned backing for…
S26 Ultra phone charging stand provisioned to accommodate 56mm x 5mm 25 watt quick chargers. Added audio guides to bottom for better sound broadcast and microphone reception. Also contains a couple pen/marker holding provisions at the…
Kfz handy mount for the Samsung Galaxy S26 Ultra, with the possebility to integrate a USB charger. This mount has been created to install the Samsung Galaxy S26 ultra in a vehicle. There are two different designs available one with a pad…
. Print Settings Printer: Don't matter Rafts: Doesn't Matter Supports: No Resolution: 0.1 Infill: 90 Filament: Any ABS Any Notes: Maybe need small resize x and y for shrinkage's compensation. Крышка должна накручиваться без усилий, но не…
I needed an adapter to connect my Scheppach HBS261 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
Magnet Wireless Charger Holder for Samsung Galaxy S26 Ultra
Dies ist ein Gehäuse für EF26 Stecker. Diese wurden bei Robotron 8bit Rechnern häufig verwendet. Ebenso bei den Erika Schreibmaschinen für Erweiterungen. Gedruck mit Ender3 und feiner Einstellung (0,12mm), Die Hebel wurden auf die…
S26 ultra in Samsung maglock clear case for a brodit pivoting mount
Using the original cable as a template with the two positioning rails facing you. Solder or wire the cables like this: BLUE - GREEN - RED - BLACK The original harness is all black, but transfer one wire at the time. Note that the two…
If, like me, you struggle to find the right motor, you can buy a cheap R260 (sometimes also called an RS260) motor from AliExpress, which is the exact size you need. I couldn’t find a variant with a D-shaped shaft, so I bought one with a…
I wanted to get rid of the DECT phone charger on my desk, but didn't want to drill additional holes into my wall, as I already have a large IKEA SKÅDIS area. So I fired up FreeCAD and designed this little adapter which fits the wall mount…
Many jigs exist for the Sonoff S26. I could not find one that fitted the new PCB layout as in version 2.6. For convenient tasmotizing and backup I constructed this jig. Use long pogo pins. Glue them into the "top" and next glue the bottom…
Another Tool holder for my Flashlight. At the same time its a stand, since its locked to the gridfinity block
Car holder for Samsung s26 Ultra without case. Made to attach to a Brodit pivot mount, but can screw to any base really. Will need to be made out of a temp insensitive material, I have done this in ASA. (my previous s22 holder like this…
Based off GSMarena measurements, using their front/back/side image as a canvas. After getting the real deal in, It's damn close but I'm not sure I'd base cases off it.
This is a pair of IO shields for the IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis. Both a blank one and a plate with cutouts for a N150 NAS/Router board "10G 2*i226-V 2.5G 3LAN NAS Motherboard" as seen on…
Support de feux fixé sur le tube de selle afin de pouvoir supprimer le porte-bagages.
Freezer Drawer Basket Attachment Clip (Frigidaire Model PLHS269ZDB0) Clip for attaching the basket drawer in the freezer to the rails. Designed for my Frigidaire Model PLHS269ZDB0 The drawer clips broke on one side so this file was…
This small work stand has two pegs ~30mm apart for holding Zama carburetors. The one I'm currently working on is off a Stihl MS261c, I'm not sure the exact model. The vertical piece should be printed on its angled base for extra peg…
Very nice case modeled by Zibibbo, but now with grippied surface edited online in CNC kitchen's https://bumpmesh.com/
I made this stand for the S26 Ultra, but I think it will fit many different phone models, both larger and smaller. Note: The parts marked as made of TPU will not fit if I them from a different material, e.g. PLA-Pet-g.
Ikea skadis mount for Blitzwolf® BW-S26
This is an enclosure for the SainSmart TGS2600 Air Contaminants Sensor Detector so you can place it in the enclosure and connect it to a USB. My second upload any feedback would be appreciated. Size is 25mm Wide x 125mm Long x 30mm High…
These are spacers for the Galaxy S26 phones that help the Universal Lens Mount sit better on the phone. Print them in any material and any infill settings. Use thin double sided tape to hold it in place if you use it a lot.
It was driving me crazy that my new Samsung Galaxy S26 Ultra wouldn't slide smoothly into my fitbag phone case. This little wedge can make a big difference. It attaches to the camera module without adhesive, held in place solely by…
zur Verbesserung der Absaugleistung habe ich das folgende Inlay kreiert
Da mein Niro EV in der Mittelkonsole kein Wirelescharger hat, habe ich mir eine Handy ablage mit Wirelesscharger konstrukiert. KI gekennzeichnet, weil ich ein eigenes Freecad Plugin coded habe, womit ein KI Tool Freecad steuern und…
Absaugstutzen für die Bandsäge Scheppach HBS261 zur seitlichen Absaugung. Anschluss Innendurchmesser: 35 mm - z.B. für einen Kärcher WP3 Staubsauger gedruckt mit Creality Ender 3 S1 Pro Slicer: Cura
Samsung Galaxy S26 Ultra & Galaxy Watch Ultra – 2-in-1 Charging Station A modern, minimalist 2-in-1 charging station designed for the Samsung Galaxy S26 Ultra and Samsung Galaxy Watch Ultra. This 3D printable stand combines dedicated…
🇪🇸 Versión en Español ☀ Soporte de Filtro Solar para Móvil – Especial Eclipse (Samsung Galaxy S26 Ultra / Compatibles) Captura fotos y vídeos espectaculares del eclipse solar con las potentes cámaras de tu Samsung Galaxy S26 Ultra de…
Rubber Brake for DAT AIWA XD-S260 And XD-S1100 These small rubber cylinders designed to brake the reel degrade over time; this is a replacement made of TPU 95A material Three diameters 4, 4.2 and 4.4mm for best fit Print Settings: 0.2…
Custom 3D-printable desk mount engineered specifically for thin 12mm desktops and Qi2 / MagSafe wireless chargers . Designed to hold a Samsung S26 securely in both portrait (vertical) and landscape (horizontal) orientations for hands-free…
This is a pair of IO shields for the IN-WIN IW-RF100S-S265 1U Short Depth Mini-ITX Rackmount Server Chassis. Both a blank one and a plate with cutouts for a N150 NAS/Router board "10G 2*i226-V 2.5G 3LAN NAS Motherboard" as seen on…
🛡 Protezione Ibrida Definitiva per Samsung S26 Ultra Proteggi il tuo Samsung S26 Ultra con questa custodia ibrida ad alte prestazioni, progettata per offrire una protezione superiore senza rinunciare a stile, comfort ed ergonomia. Il…
This is a phone holder designed for the Samsung Galaxy S26 Ultra. It is made to mount to the top of a table, desk, nightstand, or headboard so the phone hangs off the edge and can still be plugged in to charge. It can be mounted with a…
Da mein Niro EV in der Mittelkonsole kein Wirelescharger hat, habe ich mir eine Handy ablage mit Wirelesscharger konstrukiert. KI gekennzeichnet, weil ich ein eigenes Freecad Plugin coded habe, womit ein KI Tool Freecad steuern und…
