30 models
This jig is to help align the track to leave the exact amount of spacing for the kerf of the blade. This is used if the waste board is to the left of the track and what you need is on the right. Festool saws have different widths so use…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Mit diesem Adapter kann man einen dauerhaften Absaugschlauch an die Spanhaube anschließen. Mittels Abzweigstück kann man den Schlauch an die Hauptabsaugung der Säge anschließen. Ich habe den Adapter in PETG gedruckt, mit 0,6 mm Düse und…
New version is lighter and thinner. Weighs 3g. Weighs 5.5g as opposed to the 2.75g of the original guard. It can be fastened with the DJI AU fasteners or it also has a capture design that should hold it fairly well without the hardware.…
I stuck this to the bookshelf using 3M command strips. Printed on CR-6 SE using generic PLA. No supports I made this for a Philips remote but can be resized for others. PS5 remote here as well.
Fits in the TS75 blade arbor window, button turns to secure. Print slotted screwdriver hole down. Rafts/Brim: No Tree supports: Yes Infill: 20%
This is replacement parts for a Kawai FS750 white keys. This is one section. Made it gray, didn't have any white PLA. This is not perfect but it is working.
850mah battery strap for the Flylens75/85
This is a cooling tower I made that blows air up into and out around the DJI O3 Air Unit when you're configuring a Flywoo Flylens75-85 with the DJI O3 Air Unit. This is so it won't over heat while connected to BetaFlight Configurator (or…
Following the great work by FortinMike in modifying the original Koss PortaPro/KCS75 Adapters for the Oculus Quest https://www.thingiverse.com/thing:4822413 and the remix by Thorlian https://www.thingiverse.com/thing:5222313 I have…
This box is made to facilitate the mounting of a Lorawan sensor in areas of potential vandalism or natural forces. the slotted mounting holes provide multiple anchor possibilities. Housing does not need to be water tight since sensor is…
A easy model I created to lift my MSI GS75 for better cooling and typing experience, it's designed to have a slightly tight fitting so it won't easily fall out. Print instructions Because of the high temperature it might have to handle,…
Speaker adapter to fit Dayton Audio RS75-4 directly to BMW E31 840 / 850 to front doors and rear deck speaker box. Includes STL, 3MF & F3D. Inspired by this thread on bimmerpost:…
I wanted to get GPS going on my whoop for reasons. I saw the GM10 nano already comes with a cool mount (TPU FLYLENS 85 T Antenna & NANO GPS Mount.STL), but it doesn't fit the existing monopole antenna mounting mechanism on the flylens 75.…
Nahradni matice k Bazénovému čerpadlu SPS75
Stuff you will need: Two M3x4 (@5mm) Heat Inserts (Goes into the holders) Two M3x6mm screws (Secures holders to the L-Ears) M3x8mm works too. (Optional) Two M3x20mm Screws (Optional) Two M3 Nuts How to Print it: The L-Ears can be printed…
Realizzato con Fusion 360, stampato con filamento PLA+ Sunlu
Ein abgebrochener Griff an meinem alten (1988) Bandschleifgerät BBosch PBS75 hat mich angeregt diesen zu ersetzen, da es sonst noch funktioniert. Leider kann ohne diesen Griff kein neues Schleifband aufgelegt werden… Material: PLA / PETG…
Herramienta para abrir la tapa de reloj Tactical Frog VS75 No requiere soportes. Impreso con 3 paredes, 4 capas superior/inferior y 10% de relleno conectado, boquilla 0.4, 0.2 altura de capa
Requires 2 pieces of 3/4" x 5" (19mm x 125mm) Velcro one-wrap. Use a piece of 1.75mm filament as a rivet to retain the slider. The slider uses the belt clip button on the back of the radio to lock the radio in place. Print at 45 degrees…
Simple Mount for the Clarion EQS755 7-Band. Pick a place for the mount, screw the mount in place then screw in the EQ to the mount.
These sleeves have a terrible habit of falling out and disappearing. GE does not supply replacements. The only option is to purchase a new knob for $60+. This sleeve will likely fit knobs for most GE stoves manufactured during the same…
The first model is based on Suzuki P/N: 57465-18600, 57465-18601. #9 in the parts list. Works in the clutch or brake levers. Print 100% infill, I used ABS, but PETG should be good, too. The second model is based on Suzuki P/N: 57481-33010…
I found there is no good way to hang the FS80R with common hardware, so I designed this simple hook to hang mine. I designed it to be hung with two deck screws. I strongly recommend printing on it's side so the layers run vertically. I…
Dieser Deckel für einen 1000l Diesel Tank enthält eine Halterung für den DDS75 Ultraschall Füllstandssensor Dragino
Fits Suzuki P/N: 38850-47000, #27 in the parts list. I printed in ABS, but PETG or anything with decent resistance to the elements should be fine. Don't use fiber reinforced, as it needs some flex. Print with supports for the tabs. It's a…
Cover for the knobs on a Uniden MHS75 marine radio.
that is a holder to keep you handy over the Copit console of your boat
the lid becomes loose after several years of usage
Dieser Deckel für einen 1000l Diesel Tank enthält eine Halterung für den DDS75 Ultraschall Füllstandssensor Dragino
