P
PrintablesGuym
Saitek Panel Cable Manager
Print in PLA without support Find all my Saitek accessories in my dedicated collection
- Downloads
- 93
- Likes
- 20
- Rating
- 0
Search results: saite
86 models
P
PrintablesDratrik
Spring Mount for Brake Axis – Saitek Flight Rudder Pedals
This is a replacement part for the Saitek Flight Rudder Pedals – specifically, the spring holder for the brake axis. The original plastic part broke at the point where the return/centering spring is attached. This 3D printed model is a…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 39
- Likes
- 4
- Rating
- 1
P
Printablesmrusk
Twin Engine Saitek Throttle Quadrant Levers
Improved large levers and switch addons for the Logitech/Saitek Throttle Quadrant. Inspired by Diamond DA62. Print the levers twice for Twin Engine, Small Lever can be used for brake or speedbrake. Optional Switch addons (for flaps, gear,…
- Downloads
- 594
- Likes
- 56
- Rating
- 5
P
PrintablesGutBomb
Logitech Saitek Trim Wheel for Flight Throttle Quadrant
I've wanted a trim wheel for flight sim stuff for years but the old Saitek model isn't made anymore and examples on eBay are rare and cost a fortune so I decided to make my own. This is built with an Arduino Leonardo, some 3d printed…
- Downloads
- 537
- Likes
- 62
- Rating
- 4.5
P
PrintablesCanabalooza
Logitech/Saitek Heavy Equipment Side Panel Tablet Mount Bracket
Designed to work with the ARKON Drill Base Tablet Mount from Amazon located here, https://www.amazon.com/gp/product/B00PZZYR4K/ Extra hardware required 2 x M5x40mm Button Head Cap Screws and nuts 4 x M4x8mm Button Head Cap Screws and nuts…
- Downloads
- 502
- Likes
- 30
- Rating
- 5
P
PrintablesTycho Ordo
Saitek X52/X52 Pro Spring Spacers(various sizes) + Installation Tool
Wanted a Spacer for the X52 that did not touch the inner spring of my X52 Pro. Blechimmers version was the only one that did that for me, but it was a bit soft so I remade it in a few different sizes: 0.5mm 1.0mm(same as Blecheimers)…
- Downloads
- 465
- Likes
- 33
- Rating
- 5
P
PrintablesLamibi
Rudder Pedal gear for Saitek/Logitech G Flight Simulator Rudder Pedals
This was made for a friend who broke their rudder pedals. Successfully printed and used with ABS Pro with 0.1mm layers and 100% infill . It might make a difference to organise the infill layer direction to run parallel with the critical…
- Downloads
- 388
- Likes
- 19
- Rating
- 5
P
Printablessheldor
Logitech G Saitek Yoke Clamp
This is an alternative clamp for the Logitech Saitek G Yoke. It allows the yoke to be used on desks that may have an under frame that prevents using the clamp that comes with the yoke. Like the Ikea Kullaberg desk. You will need to print…
- Downloads
- 283
- Likes
- 14
- Rating
- 5
P
PrintablesRomain
Gear Saitek rudder pedals
============== Gear replacement for Saitek rudder pedals ============== Pièce de remplacement pour le palonnier de chez Saitek. La pièce d'origine ayant cassée, j'en ai redessiné une. Je conseil une impression en PETG - infil 100%…
- Downloads
- 279
- Likes
- 11
- Rating
- 0
P
PrintablesPrinter Fun-UK
Kasparov Chess Computer spare Knight / Horse (SciSys / SaiTek)
Spare Parts for the Vintage Kasparov Chess computers, made in the 80s by SciSys or later SaiTek. **UPDATE: I have remade this model more accurate, actual looks quite close to the original now. There is a version with and without the…
- Downloads
- 274
- Likes
- 14
- Rating
- 5
P
PrintablesGuym
Saitek Yoke Frame Support
A modular frame for Saitek yoke and panels for a fast installation on your PC after work: just us the yoke clamp on your desk. Three parts in 3 folders: The main frame The throttle frame (can be mirrored if you want it on the left) The…
- Downloads
- 211
- Likes
- 34
- Rating
- 5
P
PrintablesLafritz
Gitarre Saitenkurbel / Guitar Stringwinder
benötigt werden noch ein M3 Gewindeeinsatz und eine M3x16(-20) Schraube you need for Assembling one M3 threaded Insert and one M3x16(-20) Screw
- Downloads
- 173
- Likes
- 13
- Rating
- 0
P
PrintablesKrakka10
Piper PA-28 - Saitek Quadrant Lever Heads
Print Settings Resolution: 0.15 Infill: 5-10% Notes: Has some steep angles so recommend a fairly high resolution. Only the prop head requires support. How I Designed This I was inspired by internet pictures of Piper Arrow throttle…
- Downloads
- 145
- Likes
- 14
- Rating
- 0
P
PrintablesKrakka10
Luftwaffe pedals for Logitech G Saitek Pro Flight Rudder
Made for Saitek PRO rudder pedals. The standard pedals are to small and the angle dont fit a real simmers gamesetup. V1: For those who fly from an officechair, i pedals which just bolt on to the Saitek PRO, to get the bigger pedals and…
- Downloads
- 134
- Likes
- 24
- Rating
- 4
P
PrintablesEjas Mudar
Saitek/Logitech Yoke Mounting Screw - Shorter
This is a shortened mounting screw for the Logitech/Saitek yoke so that it fits under my table without hitting the keyboard drawer. This is based on Zerink's design, with smaller screw head and a larger bulb on top so that the mounting…
- Downloads
- 128
- Likes
- 7
- Rating
- 5
P
PrintablesCptDelay
Behringer X-Touch Mini Stand for Saitek and Honeycomb Yokes
A Stand for the Behringer x-Touch mini that can be mounted on Top of a Saitek or Honeycomb Yoke using their mounting screws for instrument panels. 2 pcs needed. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
- Downloads
- 127
- Likes
- 3
- Rating
- 0
P
PrintablesOliver Roy
Saitek(logitech) throttle quadrant 45 degree tilter mount
allows the Saitek throttle quadrant to be mounted at an angle.
- Downloads
- 126
- Likes
- 4
- Rating
- 0
P
PrintablesCheechSascha
FLAPS SPOILER Panel für Saitek Throttle Quadrant
Flaps Spoilers und 6 Tasten Panel für einen zerlegten Saitek Throttle Quandrant zur Motage an ein Holzbrett oder Ähnlichem. Die beiden Potis kommen in die rote Halterung und werden doch befestigt. Der 3. Poti bleibt frei. Die Platine aus…
- Downloads
- 117
- Likes
- 10
- Rating
- 0
P
Printablesmm0070
Logitech/Saitek rudder pedals carpet gripper
Carpet gripper for Logitech/Saitek rudder pedals. Print 2 or 4, goes into mount holes (the fit is rather loose). Attach with double sided tape.
- Downloads
- 112
- Likes
- 5
- Rating
- 0
P
Printablesblecheimer
Saitek X52 Spring Plate - Soft Remix
This is a very soft version of the great X52 Spring Plate. RabidRedRabbit, already made a soft version: https://www.thingiverse.com/thing:2405980 But I still want it a little bit softer. So I reduce the overall height thus compressing the…
- Downloads
- 109
- Likes
- 12
- Rating
- 5
P
PrintablesSvejseko
Luftwaffe pedals for Saitek pro flight rudder
Made for Saitek PRO rudder pedals. The standard pedals are to small and the angle dont fit a real simmers gamesetup. Angle is raised 15 degrees, but im about to increase that to 20. For those who fly from an officechair, there will be…
- Downloads
- 108
- Likes
- 8
- Rating
- 5
P
PrintablesPostfach
Saitek X52 Magnet Mod
This part makes the magnet relocation mod for the Saitek X52 Pro (and regular) easy - simply print two of them, remove the base from your stick, remove the stock parts, install the stock magnets into the parts and reassemble. Print…
- Downloads
- 107
- Likes
- 12
- Rating
- 5
P
Printablessmitty
Saitek Quadrant Bottom Stop
This is a travel limiting stop for the Saitek flight simulator quadrant. Prevent accidental thrust reversing at bottom throttle! With a light pull of the tab you can bump the lever down to hit the switch. I used this spring kit:…
- Downloads
- 101
- Likes
- 17
- Rating
- 5
P
Printableswolffman
Side panel for the Logitech Saitek Trim Wheel for Flight Throttle Quadrant
A simple side panel for the trim wheel so that the part can be closed off and it is also stronger with the panel. It can be glued on. just make sure that it is pressed against the curved part for extra strength.
- Downloads
- 97
- Likes
- 7
- Rating
- 0
P
PrintablesIsa
Logitech/Saitek Throttle Quadrant Angle Adapter
This design adjusts the angle of the throttle quadrant 30 degrees to a more comfortable flatter angle. I designed it to match the angle of the throttles seen on airliners and other aircraft. For easier storage it is printed in multiple…
- Downloads
- 96
- Likes
- 13
- Rating
- 0
P
PrintablesRANPETEL
SAITEK yoke connection mounting device
SAITEK yoke connection mounting device You can find out more on my CULTS page .
- Downloads
- 95
- Likes
- 5
- Rating
- 0
P
PrintablesRambo
Support / strain relief for the cable connector in Saitek X52 Hotas
I've always been a bit scared of bumping the din-connector and breaking something, now it's secure. For other format downloads (including original Fusion design) go to https://a360.co/2RA1wIP Designed for M3 machine screws, I used 2.5mm…
- Downloads
- 91
- Likes
- 19
- Rating
- 5
P
Printablesnyom
Saitek/Logitech X52 - IKEA Svartasen HOTAS Holder
I just bought 2 IKEA Svartasens and finished my HOTAS Setup with it. This is just a compilation of usefull things for the HOTAS itsself. What you get: Platform for joystick and throttle for installation IKEA Svartasen pillar Joystick…
- Downloads
- 89
- Likes
- 22
- Rating
- 0
P
PrintablesSalty0n3
Saitek x52 Desk Mount
This deck mount was remixed for the Saitek x52 HOTSA. I have also added the twist stays and washers, use 3x10mm screw to secure the arms to the desk bracket. Printed with 5 walls 20% infill
- Downloads
- 83
- Likes
- 9
- Rating
- 0
P
PrintablesTorbi@Orbi
Universal Saitenkurbel/Stringwinder
Zur Montage werden 1x M4 Schraube mit 20mm länge, 1x selbstsichernde M4 Mutter und zur Reibungsminimierung zwischen denn teilen eine Unterlegscheibe (ideal aus Teflon/PTFE) benötigt.
- Downloads
- 83
- Likes
- 5
- Rating
- 0
P
Printablesblecheimer
Saitek X52 Pro T-Switch Cover
When I am using my X52 HOTAS together with my Oculus Rift I have to find all switches blindly. For me it is difficult to distinguish between the three T-switches at the base of the joystick by just touching them. So I made a clip-on cover…
- Downloads
- 80
- Likes
- 14
- Rating
- 0
P
PrintablesHoschi
Airbus inspired throttle lever for Saitek throttle quadrant
This is a throttle lever inspired by the Airbus A320 throttle lever for the Saitek Pro Flight Throttle Quadrant. My design only uses one single slider for both engines since its only for fun. This lever is very light weight so it doesn't…
- Downloads
- 78
- Likes
- 5
- Rating
- 0
P
Printablesmmarv74
Logitech/Saitek X56/X55 4 way hat cover
Designed as an alternate option for the 4 way throttle button. Slip on fit. Printing: Minimum/no infill should work No supports needed when printed from base. Shrink/enlarge to get the fit you want. Print Settings Printer Brand: Creality…
- Downloads
- 73
- Likes
- 9
- Rating
- 0
P
PrintablesLucid effex
Saitek/Logitech Yoke KB Mount
I needed a better and more convenient place for my keyboard when i had the yoke on the desk. It sits at 15 degrees. I printed @ 0.2 - you can go higher. 10% infill a no supports. I used a brim and printed on end (widest end ;) ) standard…
- Downloads
- 68
- Likes
- 9
- Rating
- 0
P
PrintablesCommissar_Squid
Saitek X52 Buttonbox with Frame
Much like the designer of the original Thing I was looking for extra buttons for VR flight sims. Since i play in an Obutto R3volution simpit , there is only a small throttle support plate rather than a desk for the throttle, so it was…
- Downloads
- 66
- Likes
- 19
- Rating
- 0
P
Printablesvaeron
Saitek / Logitech Flight Yoke iPad Mount
This is one file, just mirror the object and print a second one. I found printing it on the side to be the most functional. I used 3 shells and 15% infill with PLA. came out perfect, plenty strong to hold the iPad in place. You can either…
- Downloads
- 65
- Likes
- 7
- Rating
- 0
P
PrintablesZaku
Logitech Saitek Throttle Quadrant Slim Switch
slim version of switch attachment for Logitech Throttle Quadrant
- Downloads
- 62
- Likes
- 6
- Rating
- 0
P
PrintablesJan möller
Stringwinder Saitenkurbel
Mit dem Stringwinder Saitenkurbel kann man beim Saitenaufziehen schneller die Stimmflügel drehen. Eine M5 x 40 Schraube rein - fertig.
- Downloads
- 59
- Likes
- 6
- Rating
- 5
P
Printableswolffman
Saitek Quadrant Lever Replacement v2
This is a remix in which the the cylinder at the base of the lever is offset more towards the potentiometer, the original was slightly in the wrong location. It now actually works. Some improvement could be made on the 5 curved grooves,…
- Downloads
- 57
- Likes
- 4
- Rating
- 0
P
PrintablesGuym
Saitek Throttle Cable Management
A Saitek throttle cable management box. Print in PLA without support. You'll need 4 Ruthex M3 inserts and 4 m3 * 8mm screws Find all my Saitek accessories in my dedicated collection
- Downloads
- 57
- Likes
- 17
- Rating
- 0
P
PrintablesIxman
Screw Pad - Logitech G Saitek Farm Sim Controller
Screw Pad for Logitech G Saitek Farm Sim Printed in ASA
- Downloads
- 57
- Likes
- 4
- Rating
- 0
P
PrintablesSeymour84
Saitek Pro Throttle Quadrant Dust Cover
Made a quick dust cover to avoid future cleaning of Saitek Pro throttle quadrant. Added a little hole for the appropriate “Remove Before Flight” tag. To ensure it doesn't fall off I added a couple velcro dots to the cover and the top of…
- Downloads
- 57
- Likes
- 2
- Rating
- 0
P
PrintablesPrinter Fun-UK
Kasparov Chess Computer spare Queen (SciSys / SaiTek)
Spare Parts for the Vintage Kasparov Chess computers, made in the 80s by SciSys or later SaiTek. A friend recently bought a Kasparov Chess computer after watching TV show "Queens Gambit", and wanted extra queens for when a pawn gets to…
- Downloads
- 51
- Likes
- 4
- Rating
- 0
P
PrintablesMNTrailBoss
Piper Rudder Pedal for Saitek
This pedal has a similar look and feel to the real deal, but was modified to fit over the standard pedals that come with the Saitek system. Simply remove the toe pedals on your Saitek assembly by pressing the center button. Unscrew the…
- Downloads
- 51
- Likes
- 5
- Rating
- 0
P
Printablesmarkusbart
Saitek X52 Pro Hotas Ikea Poäng Holder
This mount fixes a Logitech / Saitek X52 or X52 Pro onto the armrests of an Ikea Poäng chair. Mounted with standard M5 screws and nuts - two for each hinge and three for each clamp - and with two holes for a zip-tie to organize the cables…
- Downloads
- 47
- Likes
- 9
- Rating
- 0
P
PrintablesPrinter Fun-UK
Kasparov Chess Computer spare Castle / Rook (SciSys / SaiTek)
Spare Parts for the Vintage Kasparov Chess computers, made in the 80s by SciSys or later SaiTek. This was knocked up in TinkerCAD and stands 30mm high, made on request. There is the "Castle / Rook" model, and a "magnet cap", which serves…
- Downloads
- 39
- Likes
- 1
- Rating
- 0
P
PrintablesLayer By Layer
Saitek FS - Movable Jaw
Movable Jaw Replacement “movable jaw” or “pad” for Saitek clamps - there are 2 different versions: ORIGINAL: Designed as a replica of the original, please note that I didn't have the original part during the design process, so there might…
- Downloads
- 37
- Likes
- 5
- Rating
- 0
P
PrintablesDreamHazard
Saitek/Logitech X52 Spring Preloader - Large
Simple design for fast print - measured the spring and stick dimensions and designed the biggest compression block I could fit while still having movement in the spring and being able to fit the block over the stick. requires a bit of…
- Downloads
- 34
- Likes
- 0
- Rating
- 0
P
PrintablesMax_Bayer
Saitek Throttle Quadrant Reverse
Idea from srbarlow3 made it so you only need one ramp in the middle.
- Downloads
- 33
- Likes
- 3
- Rating
- 0
P
PrintablesNopileus
Saitek Luftwaffe Pedals Grip Plate Addon
After printing the Luftwaffe style pedals from Svejseko https://www.thingiverse.com/thing:2739648 i felt that the hole at top end bothered me so i made a little addon to fix it. Print two of each part and glue the barrel to the plate with…
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
Printablesgibson2142
Logitech Saitek Rudder Pedals Replacement PUSH button for pedal adjustment
I broke the push button on my Logitech rudder pedals for pedal adjustment and needed a new one. This is just a simple replacement button. It's not the prettiest thing, but it works.
- Downloads
- 33
- Likes
- 1
- Rating
- 0
P
PrintablesAkxe
SAITEK ECLIPSE II keyboard leg
This is a replacement leg for the SAITEK ECLIPSE II keyboard. The leg does stick to the closed and opened positions.
- Downloads
- 33
- Likes
- 2
- Rating
- 0
P
Printablesbbrks
Logitech/Saitek Panel LED Glare Shield
A glare shield that fits Logitech/Saitek flight sim/radio panels using the original screws, just take the washers off. Designed to block glare from LED strips mounted underneath the panels. Print Settings Printer Brand: Creality Printer:…
- Downloads
- 32
- Likes
- 5
- Rating
- 0
P
PrintablesTadeas.Grohmi
Logitech saitek yoke hall effect sensor upgrade
! IMPORTANT ! Logitech saitek 90° mod is required for this mod (https://www.thingiverse.com/thing:4596632) I used SS495A hall effect sensor with a arduino pro micro (USB-C version) The sensor is attached with a hotglue and it could be…
- Downloads
- 28
- Likes
- 1
- Rating
- 0
P
PrintablesT-omi
Logitech / Saitek x56 throttle top hat extension
This model is designed to provide better reachability for top hat switch on x56 throttle. This also helps with distinguishing between different switches, adds traction and helps remove possibility of triggering multiple controls at once.…
- Downloads
- 28
- Likes
- 2
- Rating
- 0
P
PrintablesMike
Saitek Pro Flight Throttle Accesories
A few things to help organize my flight sim stuff. The rack allows for a handy place to store spare throttle handle tops. I might redesign as its a pretty tight fit, but it works for my needs. The couplers allow you to join side by side…
- Downloads
- 27
- Likes
- 7
- Rating
- 5
P
PrintablesPantsManUK
Saitek X52 Pro toggle switch cap
Working the toggle switches on the Saitek X52 Pro (and I would guess the X52 as well) when you're wearing a VR headset can be a bit of a pain (Elite: Dangerous Commanders using the default profile may well know what I mean). So, I really…
- Downloads
- 26
- Likes
- 5
- Rating
- 0
P
Printablesemin3403
Tablet/screen holder For Saitek Flight System Panels
Saitek Flight System Panel için tablet ekran tutucu Tablet/screen holder For Saitek Flight System Panels
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
Printablesm m
SAITEK CALCULATOR CHESS BATTERY COVER
Saitek Chess Calculator battery cover from 1994, i recreate it as much as posible like to orginal. not the best but does the jop.
- Downloads
- 21
- Likes
- 0
- Rating
- 0
P
Printablesemin3403
Saitek Pro Flight Yoke Kelepçe pedi
Saitek Pro Flight Yoke Kelepçe pedi
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
Printablessmitty
Playseat Challenge bracket for Saitek Quadrant + gear/flap buttons
Bracket for Playseat Challenge to mount Saitek throttle quadrant. Print in orientation provided. Uses M4 hardware Also included little flap/gear thingies to sick on the buttons with VHB tape. Print Settings Printer Brand: Prusa Printer:…
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
Printablesfalken_gt4
Saitek Combat Rudder - Pedal Shaft Repair
For the Saitek Combat Rudder Pedals - Repairs the main plastic shaft and slide piece of each pedal and adds strength. For when you have braked too hard trying to stop an aircraft sliding off the runway. This repair strengthens the shaft…
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesJack Fire
Logitech Heavy Equipment / Saitek Heavy Equipment
Logitech Heavy Equipment / Saitek Heavy Equipment Ich muss darauf hinweisen das der Umbau/die Reparatur auf eigene Gefahr gemacht wir. Ich übernehme keine Haftung für Schäden oder sonstigen Mist den man selber anstellt. Wenn man einen 3D…
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesRobert Graf
Saitek Throtle Quadrant Double Mount
This can be printed rather roughly (printed mine in 0.28) as long as the screw holes are supported properly. You can decide which holes go through the table or used double sided tape to mount it. I used the 4 in the cornes, the inner 4…
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
Printablesjpfranca
Flight Simulator Stack for Saitek Yoke
Flight Simulator For the flaps, add this behind the “faceplate - right - bottom - flaps” part https://www.printables.com/model/506564-cessna-172-flaps-panel More info about hardware and software on https://github.com/jpfranca-br/flightsim…
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
PrintablesGTT
Saitek/Logitech Flight Yoke Dual LCD Mount
This system is designed for the Logitech G PRO Flight Yoke System. The brackets and face plates are 2 separate pieces that are press fit together using cut 1.75 filament. For various instructional videos I referenced Captain Bob's (no…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesDamián Sládek
Class Echo stand for Saitek yoke
Class Echo stand for Saitek yoke Printed from PLA
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
Printablesfoam.blasted
Replacement Parts compatible with Saitek Cyborg
made some replacement parts for my 20 year old Saitek Cyborg. Armrest right- and lefthanded thrust controll and wheel
- Downloads
- 16
- Likes
- 4
- Rating
- 0
P
PrintablesBoopidoo
Saitek X52 Extra Buttons
IMPORTANT, THIS DESIGN IS NOT ALLOWED TO SELL! Once I began flying flight simulators in VR I quickly realised that hitting the correct key on the keyboard is a challange when you can't actually see the keyboard. My HOTAS setup just…
- Downloads
- 15
- Likes
- 6
- Rating
- 0
P
PrintablesFreddehMcTeddy
Saitek / Logitech x52 X-Axis spare part
Ono of the plastic mounting brackets on my x52 broke, so i created a model to replace it. Figured i would post it in case any of you encounter the same issue. Note: I just created the smaller piece as i was able to epoxy the larger one.
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesGraeme
Saitek X55 / Thrustmaster X65 HOTAS spring tensioner
Simple spring tensioner for the X55 and X65 HOTAS from Saitek and more recently Thrustmaster, just slots under the spring if you've lost the original spares that came with the stick like me! Print Settings Printer Brand: Creality Printer:…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
Printablesbeandev
Saitenhalter - Tailpiece
You can change the parametric Fusion 360 model to configure it for your musical instrument. Instead of a high infill, please use a wall thickness of 3. Then it's enough to have 10% to 20% infill. PLA+ is ok for the model, but please add a…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesBenFranklin
Saitek Combat Rudder Pedals Spacer
Spacer to place Saitek Combat Rudder Pedals away from wall. Sets the pedals around 220 mm away from the wall. Very sturdy - except pins, but they are not really mechanically stressed. Complete with anti slip or felt pads on bottom and…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesRedstonePrints
Avatar Saitek/Logitech Rudder Pedal Spacer
This Spacer (Remix) is for the rudderpedals from Saitek/Logitech to bridge gap between ur pedals and the wall. The Original Model from PDrill used printable plastic pieces for it, which took, if u had a long gap to bridge quite a lot of…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesTruckTurner
Janod Kindergitarre Saitenspanner Adapter
Passt für diese Gitarre hier: https://www.janod.com/de/238-gitarre-konfetti-holz.html Muss leider mit Supports gedruckt werden - was bei mir leider die Optik der Oberfläche ruiniert hat. Aber ging um die Funktion nicht die Optik \_(ツ)_/
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesRuzu FSD
Custom SAITEK Table Clamp
Support me and Check out the model at: https://cults3d.com/en/3d-model/gadget/custom-saitek-table-clamp 3D model description This is a custom-designed, 3D-printable replacement mounting clamp specifically created for the Saitek Throttle…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
Printablescataprintsthings
Saitek X55 Joystick X&Y Axis Replacements
Saitek X55 Joystick X&Y Axis Replacements
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesGoggen
Saitek/Logitech X55 X56 flightstick pin holder
The original pinholder has a tendency to break with age. A simple fix for an expensive piece of gear.
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesRuzu FSD
ATR 72-600's PARKING BRAKE (Saitek TQ fit)
Support me and check out the files in Cults3D https://cults3d.com/en/3d-model/gadget/atr-72-600-s-parking-brake-saitek-tq-fit This is a highly detailed 3D-printable parking brake flight simulation device designed specifically for the ATR…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesRuzu FSD
ATR 72-600's gust lock (Saitek TQ fit)
Support me and check out the files via Cults3D Link: https://cults3d.com/en/3d-model/gadget/atr-72-600-s-gust-lock-saitek-tq-fit This is a 3D-printed gust lock simulator specifically designed to replicate the behavior and look of the ATR…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
PrintablesAlteRob
Saitek Throttle Quadrant Repair Part
The arms on the Saitek / Logitech throttle quadrant are easy to break at the point the arm enters the main box. Replacement parts are unavailable, so this is an alternative. It doesn't replace the whole arm, but if you cut back the broken…
- Downloads
- 0
- Likes
- 1
- Rating
- 0
P
Printables
Logitech/Saitek Throttle Quadrant Angle Adapter
This design adjusts the angle of the throttle quadrant 30 degrees to a more comfortable flatter angle. I designed it to match the angle of the throttles seen on airliners and other aircraft. For easier storage it is printed in multiple…
P
Printables
Saitek/Logitech X55 X56 flightstick pin holder
The original pinholder has a tendency to break with age. A simple fix for an expensive piece of gear.
P
Printables
Saitek Combat Rudder Pedals Spacer
Spacer to place Saitek Combat Rudder Pedals away from wall. Sets the pedals around 220 mm away from the wall. Very sturdy - except pins, but they are not really mechanically stressed. Complete with anti slip or felt pads on bottom and…
P
Printables
Avatar Saitek/Logitech Rudder Pedal Spacer
This Spacer (Remix) is for the rudderpedals from Saitek/Logitech to bridge gap between ur pedals and the wall. The Original Model from PDrill used printable plastic pieces for it, which took, if u had a long gap to bridge quite a lot of…
P
Printables
Universal Saitenkurbel/Stringwinder
Zur Montage werden 1x M4 Schraube mit 20mm länge, 1x selbstsichernde M4 Mutter und zur Reibungsminimierung zwischen denn teilen eine Unterlegscheibe (ideal aus Teflon/PTFE) benötigt.