47 models
Adam-M 's Catapult Card is realy great and the only missing peace are the right projectiles. So I resized the best flying projectiles from SteveJohnsen and put them into the Catapult Card. They are even flying faster know! One print,…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for PETGSource material: PET
2x sheet holder for 3D printer Prusa Mini/+ Print instructions PETG, need rotate 45°C, (at. picture)
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for PETGSource material: PET
This scrap bin is hold in place by powerfull magnets, so it is very easy to remove and install. It snaps into place by itself.. There are two small (Ø10x3mm) magnets embedded into the print, and two round magnets (Ø20x3mm) with…
Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant
I designed this model to understand the charactoristics of each infil by watching. Name of the infil can be found. The body is printed in PETG and the charactors are printed in PLA. If you'd like to change materials, please modify on…
Print approx. €5.15–€6.29 excl. taxPreliminary estimate for one variant
Are you also tired of guessing which side of the USB stick has to go which way into the printer? Here is the solution: a housing for you default PrusaMini USB flash drive. The fun thing is, you might test some new technics: printing with…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
made it easier to take out by shifting the sheet a little. It is recommended to fix it with double-sided tape.
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant
These are Samiel's shoes that I resculpted as a sculpting and printing exercise. Samiel wears similar shoes in the play Freischütz at Staatstheater Kassel in Germany. They were made as a premiere gift and could be used as various…
Print approx. €1.98–€2.43 excl. taxPreliminary estimate for one variant
Athena Asamiya From the Seven Deadly Sins: Grand Cross
Print approx. €4.15–€5.08 excl. taxPreliminary estimate for one variant
Why a new model? The original model has the limitation to be at minimum 4 units wide (otherwise the parametric model breaks). Therefore this model is not fully compatible with it and thus decided to be a separate static set of models.…
I made this design for me samick electric guitar, so i can hang on the wall. If you want to make some changes to the design, you can copy my Onshape model here:…
Converts the samite circuit breaker mounting to a a din rail compatible mounting. This model is a remix that moves the breaker so that it is located in the middle of the DB cutout. Simply resize in the Z direction to fit your circuit…
You can find all other parts at the original project: https://www.printables.com/model/48589-modular-stand-for-electronic-microscope
Samira League of Legends Figure (With Stand)
X-Small board for testing printed design mounts. Fits on Prusa Mini. Remix of : https://www.printables.com/model/282684-ikea-skadis Printed in : PLA Polyalchemy Exilir Alpha Brass In Fill : 15% Supports : No. If you PRINT it and you LIKE…
This pack includes: • High-detailed STL files (13 pieces) • Simplified design for FDM printers (06 pieces) • Instructions to help printing/assembling • High-quality photos of the model If you like my work, feel free to subscribe to my…
This is a work in progress for the prusamini motherboard to atach it on 2040 aluminum extrusion. https://www.prusaprinters.org/prints/36473-prusa-mini-mk3s-smokistyle-upgrade Please comment if you have a suggestion Cheers Print…
This is a housing for the RaspberryPi night-and-day cameras that typically come with two IR lights. Also part of this publication is an articulated arm with ball joint to fine adjust the camera angle. In my case the articulated arm is…
Here's honeycomb key organizer-remix. It has been prepared for smaller bed print so you can print that on PrusaMini. Key organizer is attachable to wall using dedicated hidden holes in the back.
This bed level test is for the Prusa Mini(or mini+). It is just under the 180x180 build plate size and prints one layer at .20mm layer height with a 4mm nozzle. It prints very quickly and easily with input shaping on.
Use the hexnut for alignment. The pipe is just for the render and the hole for it is 6mm so you can use any other pipe or straw.
Parametric model for a shiribasami tsugi, a japanese woodworking joint. Most parameters are adjustable. Two identical copies of the joint come together and are secured by a rhombus-shaped pin (this can be made square traditionally, but…
Samira's style rank S from league of legends Modelled in Autodesk AutoCAD and Fusion 360 Category: Art
The original plate was broken (it seems quite common). This model is made for a Samick Les Paul, might work on other generic Les Paul guitars. Printed in PETG, 100% infill, on a Satin sheet for a nice finish.
i printed it with 0.12 layer height but you can print from 0.2 with adaptive layer for a perfect overhang and no supports. you can adapt the base hole with a simple extrusion and use it on other non Samick guitars (Should go well for…
Remix of Original Prusa Mini to mount a Raspberry Pi 3 Model B+ for using eg Octoprint or Klipper.
This THING is a holder for 6(!) spools of tesa film. To be honest, I have no idea why you would need 6 spools at once, at least as long as you are not Santa Claus. But a good friend of mine requested this some time ago, so here it is...…
Popis v příloze *.pdf
Unleash the fierce spirit of battle with this stunning warrior goddess 3D printable STL model that commands attention on any shelf display. This intricately detailed figurine captures every flowing fabric detail, ornate armor piece, and…
The King of Fighters - Athena Asamiya
You can change from original data to OrbiterExtruder direct drive. The Extruder fixing part is a separate part for easy printing. The hotend is also V6 compatible so you can use a lot of parts. I use REDLIZERD. Parts required for assembly…
I made a model with holes for fixing screws. We also provide a SEPT file so that you can process it yourself. Considerin
Unos aritos o colgantes que podés usar para llevar con vos siempre esta épica pelea. Category: Art
After friendly advice from my neighbor, i wanted to decouple prusa mini from sideboard for its night jobs ;). For shure there are a lot of great anti vibration foots designed for prusa mini here. But i wanted to bring some extra mass in…
Boitier pour Raspberry 4 avec fixation pour la Prusa Mini + et support de la camera Raspberry réglable en hauteur et en orientation 2 vis M3 x 8 mm 4 vis M3 x 8 mm tête fraisée 2 écrous M3 avec notice…
A while back, one of my PrusaXL filament guides' coupler started popping off, and I saw someone posted a version that used PC4-M10 couplers (instead of the cheap metal Bowden collets). Around the same time, my PrusaMINIs had issues that…
I wanted to use the same spool holder for different brand. I use spool from prusa, but also from Eumakers and they have larger spools. Nothing fancy or new, but I find nice to have a parametric model in hand. Hope it will be usefull for…
This is a base for attaching your excellent Mini spool holder inside or outside your enclosure. Prusa Mini spoolholder is an excellent holder and I wanted to attach it on my printer enclosure. Installing the spool inside the enclosure it…
About this project: Coming in all different colors, this 6x13x0.15cm ghost clip is a multifunctional and easily accessible addition to your office supplies, whether your sorting papers or hanging supplies, this clip is there to help. This…
El busto de Oswaldo Guayasamin The bust of Oswaldo Guayasamin
Kondo Isami Samurai is a historical samurai warrior figurine STL for 3d printing, designed for collectors searching for edo period samurai model, japanese historical soldier, and tabletop samurai character. Use it for display, wargaming,…
Kondo Isami Samurai Classic is a historical samurai warrior figurine 3d model for collectors, display, and wargaming, made for anyone searching for a kondo isami stl or classic japanese samurai statue. Use it for tabletop miniatures,…
pan jajko jest zły bo nikt go nie drukuje. Będzie zły do puki go nie wydrukujesz...
Print It at base layer height 0.16 mm and a layer height of 0.08 mm. For Sparse Infill density of 100%. And 2 wall loops
A while back, one of my PrusaXL filament guides' coupler started popping off, and I saw someone posted a version that used PC4-M10 couplers (instead of the cheap metal Bowden collets). Around the same time, my PrusaMINIs had issues that…
La pieza es única y no requiere montaje adicional; simplemente asegúrate de limpiarla después de la impresión para eliminar cualquier exceso de filamento en los detalles más finos.
This pack includes: • High-detailed STL files (32 pieces) • Instructions to help printing/assembling • High-quality photos of the model Alternative Piece: • Thunder hand -The head can be printed in 3 pieces, this may help when painting…
