Counting matching models…
My 1997 Scalextric Escort Cosworth's wheels were looking a bit tired and wer loose on the axle, so I designed these 8 spoke replacements. The standard slick tyre fits straight on. NOTE: They're a tight fit. Now my Gossie is back on the…
To be printed upside down. I printed with PLA and PETG. Might be best printed with PETG on a textured sheet. You will get the texture as a surface. Was inspired by this design from Jezric on thingiverse that did not match my track height.…
Soporte para puentes de Scalextric, mismas dimensiones que el original. Imprimir tumbado. Relleno 15% o superior.
3D models given on the printing orientation, no supports are needed. Humans I printed with 0.1 mm layer height, full infill.
Break the guide holder on your Scalextric Sport car in a crash? Repair it with this replacement. Remove the old guide holder and make a hole in the chassis that is 18.85mm in diameter. You'll probably need to do a bit of filing, but don't…
Thanks to Terry for pointing out my measurements were inaccurate. The original kerbs were one of my earliest projects and the CAD was absolutely terrible. I ended up completely redrawing pretty much all of the kerbs, using things I've…
Soportes de elevacion de puente en diferentes alturas y con angulo, para pistas Scalextric Digital. El mismo soporte vale para la subida y la bajada dándole la vuelta :) Comentarios bienvenidos, si los utilizas en tu circuito, pon alguna…
this is the base for the scalextic car that I made. all you need is a motor and connect it to the base then you can drive it on a scalextric track or just have the car by itself.
A good friend switched from SCX Digital slot cars to Scalextric Digital, but had a large collection of SCX NASCAR cars, including several that he customized the livery on. He didn't want to give up using those bodies, but converting an…
I printed some of these in PLA and work ok and I did some 100 Laps without breaking them. Printed with the blade down and support on a Prusa Mk3s. Can be found on onshape here .
Scalextric Carrera digital chip door replacement. I wanted a cheaper option than the corson chip that you can get. you will need to rewire the wiring but it saves you ½ the amount. Added a file so you can glue a plate to a chassis and…
This is my version of camber for the new Scalextric with gray tracks. Provides an elevation of 2, 3 or 4 centimeters to make the climb smooth. They must be made pairs except the central one, which can be only one. I have separated the…
A good friend switched from SCX Digital slot cars to Scalextric Digital, but had a large collection of SCX NASCAR cars, including several that he customized the livery on. He didn't want to give up using those bodies, but converting an…
Modelo sencillo para dejar colocado el mando de Scalextric/SCX Advance con enganche en flecha para las pistas grises. Un mismo STL con 10 soportes numerados de 1 a 9 y una unidad sin número. Solamente debes partir en varias piezas una vez…
Inner border for 90 degree Scalextric classic track. This is for a 90 degree turn not a full hairpin. Print Settings Printer Brand: Creality Printer: Ender-3 v2 **Rafts:** No Supports: No **Resolution:** 0.2mm Infill: 20% **Filament:**…
This model is made to fit Scalextric tracks, it goes underneath the track and stands it off the ground. Each stand took just under an hour to print. They are perfect for creating bridges. Hope you enjoy them. I used Black PLA to print.
To replace or enhance your 1/32 circuits, inspired by the barriers of old scalex buildings There is two files, barrier post, and barrier (20cm) Enjoy your printed !
This old version doesn't work as well as the new ones I just designed from scratch. The new ones also have tiling for you multicolor printers out there! https://www.printables.com/model/754536-scalextric-flat-kerb-inserts-v2 Did you miss…
This is a replacement wing for the Team Rahal Hogan black Indy Car (# C522). I didn't have the original so this has been designed from photos that I could find. Print Settings Printer Brand: Up Printer: Up Plus2 Rafts: Yes Supports: Yes…
wheel rim insert like classic fuchs for use in scale racing slot cars.
These holsters will hold your Scalextric controllers so they don't lay on the floor or your track. They are designed to be screwed into a vertical surface, with countersunk screws. I printed one set in green and another in red to match…
This is a simple clamp and screw that fits the unsimple shape of the Scalextric Digital Controller, so that you can hold and adjust the throttle position to run a car on your track unattended. These were made with a .6 nozzle using PETG.…
For trying different layouts before you go out and buy track. Scale is 1:7
This piece was made to raise up the Scalextric pedestrian bridge to fit over a 4 lane slot car track. There are two files, the first is for a color print if you have dual color printer. The taller file is for more clearance. I would…
These are the 3D-printed tire barriers I use on my track. The dimensions of the tires in these files are based on the rear tire size of the NASCAR NextGen ZL1 tires and are stacked four tires high. Each barrier (based and unbased) has…
Camber for classic Scalextric with black tracks. Provides an elevation of 2, 3 or 4 centimeters to make the climb smooth. They must be made pairs except the central one, which can be only one. I have separated the support piece from the…
This is a reverse engineered (with permission from Kevan, aka CaptainKev, who invented them) design for the Lex-Lox track attachment system by TraxPert (Kevan). Read more about them and how they work here (old forum thread) and watch the…
I have some Scalextric models on a display shelf. I needed a display base that looks like tarmac. I printed this on a textured sheet.
A replacement wheel for the classic Scalextric Mini Clubman 1275 GT C122 Category: Toys & Games
drop in guide for Scalextric car guide. You can put it on once and run it for a while but if you take it off it has a tendency to break. So print many. Also make sure you Arachne settings on the walls. use .4 or .2 nozzle.
I used the original wing as a reference, but made some changes to make it lighter. idela to print at 0.05 or 0.10 mm with tree supports Weight 2.6 g
Perfecto para unir dos puentes y pasar la via por medio.
This is a cool scalextic car that fits the base that I made.
This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/gOD9dpKZDO7 Scalextric 1:32 rear wing WIP Not perfect but a very good start Print Settings Printer Brand: Anycubic Printer: All-metal Mega Infill: 100…
A holder for mounting a Scalextric C8515 rev H in Revoslot cars. To avoid electric contact to the metal chassis. Tested in Porches and Marcos, but should fit others too. Remove the DPR door from the chip. Use double-sided adhesive tape,…
A simple wheel hub for 2.5mm D shaft motors. I'd recommend a drop of superglue to hold them on the shaft
Based on the simple design slot.it had sold on Shapeways that is no longer available. Modified for easier printing on filament printers. Hexagons are the bestagons! Print as is in any material, and discard the little triangular support…
I've made this as a school project a few years back, now I got back to it to readjust the size a bit to fit the scalextric wheels better. It's about 1.04% scale of my originally 1/32 sized model. Printing at 0.1 mm layer height helps to…
I prefer slot car controllers with two-finger triggers. After using an ARC Pro for oXigen racing, I knew I needed to make one for this controller as well. Print in whatever material you like in the provided orientation with supports for…
Based on the simple design slot.it had sold on Shapeways that is no longer available. Modified for easier printing on filament printers. Hexagons are the bestagons! Print as is in any material, and discard the little triangular support…
A simple wheel hub for 2.5mm D shaft motors. I'd recommend a drop of superglue to hold them on the shaft
