Search results: scut

Sort order

106 models

P
Printablessteffanders

Crosscut Fence Stop (Mafell)

I originally designed this crosscut flipstop for my Mafell Erika table saw, but with a few modifications of the slider it can also be used with other fence profiles or even other machines like a drill press or a crosscut saw. Feel free to…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
5
Rating
0
P
PrintablesAdam

Pipe flange (escutcheon plate) in various sizes

This is a decorative pipe flange (escutcheon plate) that fits around a water or drain pipe and conceals the larger diameter hole it goes into. It prints in two parts that fit together for a clean look. Note that the connection is not…

Downloads
404
Likes
40
Rating
5
P
PrintablesFeday

Bosch easy grasscut 23 compatible cap

I use a wire grasstrimmer to remove the weeds from between the pavement. Of course that wears out the protective cap that holds the wire spool in. Print this replacement, and keep on weed-wacking! It is highly recommended to print this…

Downloads
338
Likes
25
Rating
4.5
P
Printablesinno3design

Pipe Collar - 22 mm Escutcheon - Rosette Cover Ring for Wall or Floor

These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…

Downloads
210
Likes
52
Rating
0
P
PrintablesArea51

Radiator Pipe Collar (escutcheon ring)

Well, I needed some radiator collars (escutcheon rings) for the new kitchen floor - the sizes available in the nearest hardware store would not fit, and I have a 3D printer, so... There are models for 17, 27 and 34mm pipes - If you have…

Downloads
210
Likes
32
Rating
5
P
Printablesrogerquin

Shaving Lather Scuttle

This shaving scuttle is a variation of my Lather Bowl Design https://www.thingiverse.com/thing:3392930 . It was designed to be printed without supports. The stopper can be printed with TPU. Please post your makes. Happy Printing. 12/04/20…

Downloads
204
Likes
35
Rating
3

Dremel Crosscut Table saw & Sled

This model remixes the main table from https://www.printables.com/model/456310-transformable-dremel-table-saw-disc-sander-shaper, so you'll need to download and print that model as well, potentially skipping the main table from there…

Downloads
197
Likes
55
Rating
0
P
Printablesfranpoli

Parametric escutcheon generator

The file escutcheon.scad can be used as an OpenSCAD library to generate single pipe or double pipes escutcheon. This model has been designed to be printed with ease in FDM printers. Have a look at the documentation for further details on…

Downloads
162
Likes
68
Rating
5
P
Printablesknallaff

Replacement insert (sacrificial board) for METABO KGSV 72 Xact SYM crosscut miter saw.

Replacement insert (sacrificial board) for METABO KGSV 72 Xact SYM crosscut miter saw. As a spare part or as a tuning, because: No sacrificial board required in contrast to the original, a tear-free saw cut as this insert is closed.…

Downloads
148
Likes
23
Rating
0
P
PrintablesRnd

Radiator Pipe Collar (escutcheon ring/rosette) 15mm

A simple 2 piece ring with an inner diameter of 15mm.

Downloads
133
Likes
13
Rating
0
P
PrintablesStobbart

Metabo: guide lame / Table insert for Metabo Crosscut Saw

Remplacement du guide lame. Imprimé en deux parties. Scie à onglet Metabo KGS 216 M. Visitez mes trois autres modèles de pièces de rechange pour cette scie: Cover lighting Bouton/poignée Extractor channel

Downloads
113
Likes
20
Rating
0
P
PrintablesAced8567

Escutcheon

Escutcheon with a ~1/2" pipe clearance and 4" ouside diameter. This was created to cover an abnormaly large hole that was created when installing the toilet fill line.

Downloads
108
Likes
7
Rating
0
P
Printablescmh

Stepped ogee escutcheon for radiators (pipe cover)

Radiator pipe cover thingy - also known as an "escutcheon". (I learn all types of stuff researching for when I upload) Covers the larger hole in the floor to make the installation look cleaner. Most escutcheons are simple designs, I…

Downloads
106
Likes
16
Rating
0

Scuttlefish Submarine

The Scuttlefish - a submersible steampunk vehicle designed for a crew of 2. I originally designed this for MakerBot and Bold Machines under the name Gowanus Monster for the Margo Series back in 2015. This is the updated version with open…

Downloads
102
Likes
27
Rating
0
P
PrintablesImAndrewPons

Stout Scutoid

This is a scutoid, a naturally occurring shape I first learned about from this 3D Printer Academy video. There didn't seem to be many scutoids on Printables, so I created this model by following this tutorial in Fusion360. You can print…

Downloads
102
Likes
8
Rating
0
P
Printablesdav88

scutoid remix

this a remix to get rid of the artifacts in mathgirl's hollow model;. Category: Math Art

Downloads
101
Likes
8
Rating
5

Scutosaurus Karpenskii

Parieasaur featured in Walking With Monsters.

Downloads
97
Likes
16
Rating
0
P
PrintablesTenPuklona

Wrench holder for stihl grasscutter / držák na klíč pro křovinořez

🏗 no supports ⚖ 1 gram of filament each ⏱ printable in 10 minutes each

Downloads
95
Likes
17
Rating
0
P
Printablesswoozle

Wider stepped ogee escutcheon for 1/2 inch pipe

Needed a little more coverage than the original escutcheon, and needed scaled to fit a 1/2 inch pipe for a toilet supply. Might need even a little more coverage, old bathroom walls get a little grungy. And jeez, that valve is furry in…

Downloads
88
Likes
15
Rating
0

Peugeot, Ducato, Jumper X250 scuttle panel drain filter, sítka odtoku torpéda

Hlavní velké sítko stačí zasunout z vrchu do odtokového otvoru. Malá sítka s redukcí na hadičku se instaluje do předem předvrtaných otvorů v místech, kde je pouze malá odtoková dírka. Doporučuji předvrtat vrtákem průměru 10mm, následně…

Downloads
88
Likes
2
Rating
0
P
PrintablesKraxelAxel

Radiator Pipe Collar Escutcheon

Idea I always disliked the looks of the two semi fitting pipe collars around the pipes of my radiators. During my last home improvement project, I decided to make the covers more attractive. They consist of three parts: The frontplate,…

Downloads
75
Likes
31
Rating
0
P
PrintablesStormCrow 13

Scute Bugs from MTG

Based on all available evidence Zurdi's survival rules 1-780 are all “There are always more scute bugs.” Unfortunately none of my D&D group were traumatized by Scute Swarms so these will probably going to wind up just as generic Bug…

Downloads
72
Likes
20
Rating
0
P
PrintablesStobbart

Extraction channel for Metabo Crosscut Saw

Remplacement du déflecteur de la scie à onglet Metabo KGS 216 M qui n'est plus disponible comme pièce de rechange (n° 41 Extraction channel selon liste de pièces Metabo pdf). Visitez également mes trois autres modèles de pièces de…

Downloads
67
Likes
14
Rating
0
P
PrintablesWyldesyde007

1/2" MIP Pipe Escutcheon

This piece was made to fit a unique situation where the elbow fitting was protruding through the wall (pictured), The flange has a 7/16" recess to accommodate this. There are two versions included, a threaded version which fits 1/2"…

Downloads
65
Likes
11
Rating
0
P
PrintablesMartasSan

Bosch easy grasscut 23 compatible cap

Tweaked cap to fit better and last longer

Downloads
62
Likes
3
Rating
0
P
Printablesinno3design

Pipe Collar - 15 mm Escutcheon - Rosette Cover Ring for Wall or Floor

These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…

Downloads
62
Likes
4
Rating
0
P
Printablesinno3design

Pipe Collar - 18 mm Escutcheon - Rosette Cover Ring for Wall or Floor

These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…

Downloads
62
Likes
11
Rating
0
P
PrintablestheRatchet

3/4" Escutcheon Plate for Starlink

This is a escutcheon plate that I made to fill the 3/4" hole I had to drill in house to get the Starlink cable through the wall. The shoulder is designed to go inside of a 3/4" hole. The inner hole for the cable is 3/8" diameter. The…

Downloads
57
Likes
4
Rating
0
P
PrintablesPantstorm

Stargate Glyph Magnet - Scutum

Fifth symbol of the Earth address from Stargate, requires two 4mm x 5.5mm x 18mm magnets

Downloads
53
Likes
14
Rating
0
P
PrintablesStillwave

Keyhole Escutcheon

Modelled from existing Escutcheon, no idea where original escutcheon is from, so modelled to create spares. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No Resolution: 1mm Layer Height…

Downloads
53
Likes
8
Rating
0
P
PrintablesGuido

Dust collection bag insert for Makita crosscut saw No Supports

Perfectly working dust collection bag insert for Makita crosscut saw. Self designed. Secure the dust collection bag with a cable tie. Maybe it also fit other brands. No supports print.

Downloads
48
Likes
10
Rating
5
P
PrintablesMario M

Crosscut saw 90° angle template

Most dry cutters do not have industrial quality and therefore adjusting the cutting corner may be hazardous. The most used corners are 45° en 90°. The template has a rill that fits in the blade crevice. If you fasten the guard against the…

Downloads
44
Likes
9
Rating
0
P
PrintablesJohn Holbrook

Crosscut sled for small bandsaw

This is a crosscut sled for a small bandsaw. I originally designed this sled to be made from ⅛" laser cut plywood, though the parts could also be 3D printed. The attached PDF file includes a layout of all parts for laser cutting. To…

Downloads
40
Likes
12
Rating
0

Scutellasaurus

Basal thyreophoran from the Kayenta formation.

Downloads
39
Likes
4
Rating
0
P
PrintablesPrebbsit

Scuttle Drain Filters (set of 3) – Fiat Ducato / Citroen Relay / Peugeot Boxer X290

Three drop-in debris filters for the windscreen scuttle drains on X290-era Fiat Ducato, Citroen Relay and Peugeot Boxer vans and motorhomes. These sit in the top of each drain and catch the crud where you can see it. Pull one out by the…

Downloads
39
Likes
0
Rating
0
P
PrintablesMario M

Crosscut saw 45° angle template

Most dry cutters do not have industrial quality and therefore adjusting the cutting corner may be hazardous. The most used corners are 45° en 90°. The templates has a rill that fits in the blade crevice. If you fasten the guard against…

Downloads
39
Likes
3
Rating
0
P
PrintablesKevin Wells

MG Midget Window Crank Escutcheon

3d Printable Replacement for the MG Midget Window Crank Escutcheon. I recommend printing it in either ABS or ASA for longevity.

Downloads
39
Likes
7
Rating
0

Escut del Barça

És un clauer del Barça, fet amb 2 colors

Downloads
38
Likes
2
Rating
0
P
PrintablesDragonArtist15

Scutosaurus Figurine

1:18 scale model of an Scutosaurus. The model features detailed scale texturing along the model. I created two variants of the model: standing, and posed. I recommend printing it at a finer layer height or with a resin printer. The files…

Downloads
37
Likes
11
Rating
4
P
PrintablesBen Sutton

Escutcheon pipe flange

The inlet pipe to our water heater leaked, causing water to run down into the heater's casing and rust it out from the inside. After replacing the heater I made this to deflect water in the case of any future leaks. Printable as one piece…

Downloads
36
Likes
9
Rating
0
P
PrintablesRobdanig

Scuttle Bug kids folding trike footrest, topology optimised, generative design

Footrest for Scuttle Bug brand fold-able trike for infants. I used generative design simulation to remove some material with approx. 3kg load on each side. Footrest has to be removed to fold trike. A small amount of thin foam tape can be…

Downloads
36
Likes
4
Rating
0
P

Door Peep View Hole Escutcheon 14mm

So I might have maybe possibly accidentally mis-drilled my pilot hole crooked for my new peep hole. I had to make the hole egg-shaped to fit the viewer in the door so a sliver of hole was showing past the viewer on the inside. I made this…

Downloads
35
Likes
2
Rating
0
P
PrintablesKJ.

Jaguar ESCUTCHEON SCREW COVER GJA1108ACLEG

Jaguar ESCUTCHEON SCREW COVER GJA1108ACLEG inner door latch screw cover for Jaguar XKR/XK8(X100) 96-05, this is a replacement for the original, it will come off after installation if you so wish(the original most of the time will not…

Downloads
35
Likes
2
Rating
0
P
Printablesthelanlegend

Tablesaw Crosscut Sled Blade Guard

A blade guard is important to prevent accidents when using a crosscut sled but they make the sled itself clunky and awkward to store. The blade guard attaches to the fence using the same T-Track you might already be using for your stop…

Downloads
35
Likes
12
Rating
0
P
Printablesmbs

Double pipe cover (escutcheon) for 1/2 inch pipe / Doppelrosette für 12,5mm

🇺🇸 English This double pipe cover (also known as an escutcheon or trim ring) is specifically designed for approx. 1/2 inch (12.5 mm) heating pipes. It is used to neatly conceal the gap in floors where two pipes emerge. Pipe Diameter: 1/2…

Downloads
34
Likes
3
Rating
0
P
PrintablesSki3d

Vevor / UScutter Vinyl cutter USB strain relief

Strain relief for a Vevor or UScutter vinyl cutter for the usb port. Cutter brace - Little thinner and should work the stock nuts and bolts Cutter brace V1 - is just little thicker and moved the usb port to the right a little bit. When…

Downloads
34
Likes
8
Rating
0
P
PrintablesDaniel Ryan

Stop Block for Table Saw Crosscut Sled, compatible with fulton and others

This stop block was designed, after the table saw found the stop block that came with my crosscut table saw sled...don't do that. After a few moments of sadness, inspiration struck and in a flash and a very fast mad dash…plus a few days…

Downloads
34
Likes
1
Rating
0
P
PrintablesAti_

Tap pipe plate / cover / collar / escutcheon

Since I thought the backplate of my outside tap was ugly I made this print to cover it. Not sure what the wallplate + pipe is called, but I added a picture on what I used it on. You don't need to detach anything in order to fit the cover.…

Downloads
33
Likes
3
Rating
0
P
Printablesjjg

Escutcheon

This is a two-piece cover used to hide the ugly parts of plumbing. I never knew there was a word for this until I went looking for some to fit the oddball fixtures we used to renovate our bathroom. Of course I couldn't find anything that…

Downloads
30
Likes
3
Rating
0
P
PrintablesRoland Goller

Wallmount GrassCut - Rasentrimmer or other Tools

Wenn dir mein Modell gefällt, würde ich mich über ein like freuen If you like my model, I would be happy about a Like

Downloads
30
Likes
3
Rating
0
P
PrintablesWilliam Sparrow

Toyota Celica 6th gen scuttle cover

Replacement for the screw access panel for the scuttle cover for a sixth gen Toyota Celica. I need to reprint this some time in the future so will update the model or give some printing instructions then. Otherwise PETG or some other UV…

Downloads
29
Likes
6
Rating
0
P

VW Beetle Metal Dash Conversion Latch Escutcheon for Glove box Door

I am doing the metal dash conversion on my padded dash 74 Standard VW Beetle. To do this, you take the back of the existing padded dash door, remove the front of an old metal dash door, and join them together. The catch is the latch holes…

Downloads
26
Likes
10
Rating
0
P
PrintablesMartinD

Pipe Escutcheon / Decoration Collar / Rohr-Rosette

Pipe decoration escutcheon for 10 mm Pipe Spitted with snaphooks for assembly on existing pipe installation.

Downloads
25
Likes
0
Rating
0
P
PrintablesCVokey

Taylor of Old Bond Street Scuttle

Shave scuttle to keep your lather warm. It was designed to attach to Taylor of Old Bond Street shave cream tubs for travelling. Makes a decent spot to carry some fresh blades. It has fit on similar tubs. There are two versions of the…

Downloads
25
Likes
3
Rating
0
P
PrintablesRogue Bean

Crosscut Sled Guard

Blade guard for a table saw crosscut sled. The guard can be installed in either the long or short direction, depending on the blade size and height of the sled. Category: Parts

Downloads
24
Likes
5
Rating
0
P
PrintablesSeglschorsch

parametric escutcheon fusion file

Parameters for height width diameter distance round_off Prints great with PETG, 0.4 nozzle, 4 walls (probably less is enough), 2 layers (top and bottem)

Downloads
24
Likes
2
Rating
0
P
PrintablesMrSpaceman

Magnetic Crosscut Saw Jig

I bought a hand tool woodworking book called "Woodworking Joinery by Hand" and it detailed a number of very simple magnetic jigs to help sawing wood and keep the saw at the correct angle. This is a simple version of the crosscut jig from…

Downloads
24
Likes
4
Rating
0
P
PrintablesOttaRoss

Replacement clearing-teeth for an Omnitech (or similar) crosscut paper shredder

This type of paper shredder has moulded teeth that keep the rotating drum clear of the paper strips it is generating. Those teeth are part of the housing, so when they break there is no practical replacement part available to keep the…

Downloads
23
Likes
1
Rating
0
P
PrintablesSanbab

Karcher vacuum to crosscut saw 30 mm binnenmaat, 32 mm buitenmaat

Karcher vacuum to Ferm crosscut saw 30 mm binnenmaat, 32 mm buitenmaat

Downloads
23
Likes
2
Rating
0
P
PrintablesJacob Desforges

Escutcheon for 1/2" Toilet Shutoff Valve

This is a fairly specific ellipsoidal escutcheon for my particular situation. The valve bonnet is not centered in the hole in my tile, and the rotation is off by a few degrees relative to the back wall. I have included the .f3d AutoDesk…

Downloads
23
Likes
4
Rating
0
P
PrintablesWeared3d

Bosh EasygrassCut 18 - 230 Cup Blade

i print it at 10 perimeters in petg, not tested Yet, Test it before use, at your own risk. Nylon CF is the best solution.

Downloads
22
Likes
3
Rating
0
P
Printablesvastempty

Dewalt491RS and Rockler CrossCut Sled Support Clamp

The Rockler Crosscut sled needs support along ¾ of its base, the Dewalt491RS does not provide enough table length for that support. This clamps to the Rolling stands' handle to provide that support, at least for the center of the sled.…

Downloads
22
Likes
2
Rating
0
P
Printablesdherb

200mm Magnetic Crosscut Jig

This 200mm crosscut jig provides a secure 90° guide for handsaws, improving cutting accuracy and consistency. It is designed for 12mm diameter, 3mm thick magnets, but smaller magnets with enough strength will also work. The reference face…

Downloads
21
Likes
5
Rating
0

Crosscut saw spider gauge + Felling saw lengths

I got bored and decided to make my own spider gauges, while these are fairly plentiful in the US, it may be a fun way to make your own tools when working on crosscut saws! I am working on a long jointer and possibly a short jointer/raker…

Downloads
20
Likes
2
Rating
0
P
PrintablestheSecond55

Replacement Drawer Pull and Escutcheon

One of the 4 handles on an old cabinet we've used for years broke; finding a matching replacement was pretty much impossible. I came up with this solution. Regretfully, the old thru-holes have wallered out, making perfect alignment…

Downloads
20
Likes
3
Rating
0
P
PrintablesJay Steel

Smith & Locke Euro Escutcheon Insert

I was fitting a lock but thought the Escutcheon I fitted left too big a hole so I created this insert piece to tidy up the hole The Escutcheon I used was bought here:…

Downloads
20
Likes
1
Rating
0

Shower Escutcheon, Moen

I printed this with thick walls (~1.8 mm) and light infill (5% gyroid) using PETG. ~0.6 mm bottom layer ~0.9 mm top layer Also made a spacer to fill the gap back to where the mounting screws attach so it's less likely to deflect under the…

Downloads
19
Likes
6
Rating
0
P
PrintablesPat

Aston Martin Windscreen Scuttle Bung

This bung replaces rusty bung fitted in windscreen scuttle.

Downloads
19
Likes
1
Rating
0
P
PrintablesRiotOne

Keyhole escutcheon

Printed in PLA due to fine tolerance of hinge. Can be screwed into place. Option with no screw holes to stick on. Version which only hinges to the left. Version which only hinges to the right.

Downloads
18
Likes
3
Rating
0
P
PrintablesBecca

DM542T Stepper Motor Driver DIN Mount with SCUTTLE Binder Clip Retention

This is a modification of the SCUTTLE robot v3's battery DIN mount to fit a DM542T Stepper Motor Driver. The mount is held to the din rain using part of a 1 ¼" binder clip. Remove the binder clip handle, then bend it out slightly to make…

Downloads
18
Likes
3
Rating
0
P
Printableskrazyderek

4" [100mm] Laundry Faucet Cover Plate Escutcheon

Model can be edited directly in onshape.com Multiple mounting options possible threaded nuts washer under faucet clamp Print with ABS, PETG, PC or other similar hard & tough plastic. Print the optional tiny gasket out of a soft filament…

Downloads
17
Likes
0
Rating
0
P
PrintablesRancatron

Door Knob Escutcheon

We ran into some issues trying to use a door knob like this one: https://www.amazon.com/gp/product/B0CGNHJBG8/ Our doors were a bit too skinny hence this spacer.

Downloads
16
Likes
2
Rating
0
P
PrintablesQwiktune

USCutter SC2 Weeding Tool Caddy

UPDATE I added a version 2 that's actually the exactly the same just +.1mm longer for (hopefuly) a tighter press fit although I have no tested it yet, so let me know. I also put a slight fillet on the edges I made a tool organizer that…

Downloads
15
Likes
5
Rating
0
P
PrintablesMrSpaceman

45 degree crosscut jig for frames

I bought a hand tool woodworking book called "Woodworking Joinery by Hand" and it detailed a number of very simple magnetic jigs to help sawing wood and keep the saw at the correct angle. This is a 45 degree version of the crosscut jig…

Downloads
14
Likes
2
Rating
0
P
PrintablesSteveJohnsen

Plumbing Cleanout Wall Escutcheon Plate (cosmetic cover)

This escutcheon has two purposes. First, it is designed to make a plumbing cleanout wall access cap a little better looking; and second, it provides a wider diameter cover to hide possible wall damage or sloppy workmanship at the hole in…

Downloads
13
Likes
2
Rating
0
P
Printableselectricyoshi

T-Track Slide Stop for Crosscut Sleds

This is a printable stop that fits in standard 0.75" T-track and can be used to set the cut distance on a variety of crosscut sleds. It uses two embedded magnets to raise and lower the stops, which allows you to keep this in the same…

Downloads
12
Likes
7
Rating
0
P
PrintablesStobbart

Protection laser et LED scie à onglet Metabo/Cover lighting for Metabo Crosscut Saw

Il s'agit d'une scie à onglet Metabo KGS 216 M. Le cache qui se trouve sous la lame et qui protège le laser et la lampe LED était cassée. J'en ai profité pour remplacer la LED OEM par un modèle plus puissant:…

Downloads
12
Likes
2
Rating
0
P
PrintablesMakerzzz1

Escutcheon 0.5-in -ID

1/2" Pipe Escutcheon — Two-Piece Snap-On (2.25", 2.75", 3.25") Remix attribution This is a remix of Abschlussrosette für Rohre (pipe escutcheon) by pits , licensed under CC BY-SA 4.0 . Released under the same license. The original…

Downloads
12
Likes
0
Rating
0
P
PrintablesMarkus

Crosscut miter insert for portable work bench

Disappointed with other options (difficult to attach to a workbench, durability, lots of material/print time) I made a basic crosscut guide to fit those portable workbenches that have a clamping function. 10x10cm (4"x4") opening for your…

Downloads
12
Likes
2
Rating
0
P
PrintablesOldCoder

Escutcheon and Grommet for Pepwave mimo antenna wires

Escutcheon and Grommet to tidy up hole and antenna wires from Pepwave mimo antenna I mounted on our RV

Downloads
12
Likes
2
Rating
0
P
PrintablesChris Hargraves

Plumbing Supply Escutcheon (Cover)

When reflooring my bathroom, as a rookie DIY tiler, the cut was a bit larger that I should have done, but didn't fully realize the implications of that as far as hiding said hole as the all of the escutcheons I could find weren't big…

Downloads
11
Likes
0
Rating
0
P
PrintablesZeussa

Euro Cylinder Escutcheon Blank Cover

Designed to fit door escutcheons and cover unused keyholes. The model uses small retention tabs on the cylinder body for a secure fit without glue. Prints quickly and requires no supports. Feel free to scale or modify to match your…

Downloads
11
Likes
2
Rating
0
P
PrintablesThomas Riesel

Atika KGSZ 210 chop and crosscut saw lever was broken

The lever from the Atika KGSZ 210 chop and crosscut saw was broken. No new part from the Manufacturer was available, so

Downloads
11
Likes
1
Rating
0
P
PrintablesZilver

Bosch UniversalGrassCut 18V Wall Mount

Place part slanted and print in a high strength material of your choice!

Downloads
10
Likes
4
Rating
0
P
PrintablesMihai-Gabriel

Second handle for electric scuter

Second handle for electric scuter

Downloads
10
Likes
1
Rating
0

Pipe Collar (escutcheon ring) on click

Pipe Collar 10-40 mm (escutcheon ring)

Downloads
9
Likes
3
Rating
0
P
PrintablesThatVolvoGuy

Shower Escutcheon plate

My brother needed a custom plate for a cheap shower faucet that needed a thick spacer

Downloads
8
Likes
2
Rating
0

Fiscutter

Just a fshhhh cookie cutter

Downloads
7
Likes
2
Rating
0
P
PrintablesGIVEMHEVN

"Scut Farkus – The Yellow-Eyed Menace"

"Scut Farkus – The Yellow-Eyed Menace"

Downloads
6
Likes
3
Rating
0
P
Printableslayerbound

Radiator Pipe Protective cover 20mm (escutcheon ring)

This is a protective cover to protect a 20mm radiator pipe. Taking up approximately a 45mm volumetric space. Prevent damage from sources such as handheld vacuum cleaners, as well as robot vacuum cleaners that will potentially bump into…

Downloads
6
Likes
0
Rating
0
P
PrintablesBik_Craft

elbow connector for Hikoi crosscut saw

elbow connector for hikoki crosscut saw type C8FSHG

Downloads
6
Likes
0
Rating
0
P
PrintablesArkovski

Bathroom escutcheon thumbturn spindle (rectangle with hole)

Really simple model to be inserted onto the spindle.

Downloads
5
Likes
0
Rating
0
P
PrintablesMike

Back-up Temporary Use Crosscut Saw Handle

This is a lightweight back-up/limited use crosscut saw handle. These parts will have limited life, but will work in a pinch. I print using PETG and 100% fill and the Saw Handle Part 4FW is a version that accepts 1/4 flat washers at a…

Downloads
5
Likes
1
Rating
0
P

Deep Escutcheon

I used this for my shower rain head to cover a large gap. see pics below.

Downloads
5
Likes
0
Rating
0
P
PrintablesDan Rogers

Nitro Boat dash escutcheon (master power panel) replacement part

A customer had a dashboard panel that was in poor shape so he took it off and sent it to me. I duplicated it and printed him a few to fix the problem. This is the dashboard panel or the master power switch on a Nitro bass boat. In the…

Downloads
5
Likes
1
Rating
0
P
PrintablesFloatingBoater

Eurocylinder escutcheon plate handle eurozylinder

This is a simple cover plate (escutcheon) for a eurocylinder gate lock with a small handle to close it when locking. The FreeCAD design is included for modifications - or just mirror it in your slicer.

Downloads
5
Likes
2
Rating
0
P
Printableskijeen

ebike battery key/lock escutcheon/bezel/trim

really basic and primitive model made in tinkercad

Downloads
4
Likes
0
Rating
0
P
PrintablesGIVEMHEVN

Christmas Story Scut Farkus Keychain / Pendant

Bring your favorite designs to life with this high-quality, layered keychain! Designed with 3D printing in mind, this model features distinct height levels for each color, making it incredibly easy to achieve a vibrant, multi-colored look…

Downloads
4
Likes
0
Rating
0
P
PrintablesRobert West

Escutchion - European door handle plate -- dverní štít -- shorter version

There are two distances between the handle hole and opening for the lock. This is the shorter / smaller version.

Downloads
4
Likes
1
Rating
0
P
PrintablesJamay

Service fuse escutcheon plate

Escutcheon plate for service fuses, fits pretty much every brand, have yet to find one that doesn't fit. Have printed out of petg and pctg, needs to be flexible enough to bend into the fuse.

Downloads
0
Likes
0
Rating
0