180 models
Poseable hands for Dummy13. You will need the fingers from Alioth's poseable Lucky 13 hands. They are currently scaled for 500%, but should function down to about 200% (40% of this model size) scale if your printer is dialed in. If you're…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant
Decided to add the 3MF for the popular robot hand model by Make-a-print to make printing easier in different colours. Files have been separated according to the original design colours. Two folders of files are available, one for the full…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
Keep your cat fascinated with this design of a roll-around-and-chase cat toy that uses threading, allowing you to take the two halves apart and swap out treats or other objects inside. The two parts are designed so that they can be placed…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
Henry snaps together and his eyes can be posed. The gcode for his eyes contains a pause to facilitate the color change. All my models are free to download and remix. If you appreciate them, please leave a download and a like!
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This is a simple rack to store reuseable straws. It has slots for up to 10 straws and 2 hooks where you can hang the brushes used to clean the straws. It's easiest to hang this using command strips. Print instructions Print with the large…
Print approx. €2.84–€3.48 excl. taxPreliminary estimate for one variant
Robot based on the excellent Youtube tutorial by SouthernGFX. Sculpted and optimised for 3D printing: added thickness, split into easily printable parts. The gcode files are split up into “body+head” and “eyes” so you can do a multi…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
be careful when peeling it off after printing. It is made thin to maintain flexibility adaptable to different supports
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
🇮🇹 Italiano Perno di ricambio stampato in 3D per il coperchio del bidone carrellato da 240 litri della JCoplastic, il modello utilizzato da SEAB per la raccolta differenziata in Alto Adige. Il perno originale in plastica tende a rompersi…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
Build your skeletal army! This model features a highly poseable skeleton figure as well as an imposing suite of weapons. Printing and assembly For best results, print the skeleton parts in ASA. PETG is all right too. PLA for the skeleton…
***Update: 15.07.2024 - Add STL data*** Hello print enthusiasts, here you can find the first version of my robot hand. The hand is assembled from several parts: When assembled, the hand can still move freely. The hand holds its position…
This is my first attempt at an articulating hand model. It will do most poses that a human could do with their own hand. It might be useful as a drawing aid, but really I just think it is fun to play with. All the parts work for the left…
Bring some playful holiday magic to your home with this adorable Flexi Christmas Lizard — a fully poseable 3D-printed toy with smooth segment articulation and a charming festive look. Designed in a bright green color with oversized…
Hello print friends, as some people have requested, you will find now the “ right hand version ” of my robot hand. The hand is assembled from several parts: When assembled, the hand can still move freely. The hand holds its position…
The other dummy 13 posable hands and fingers didn't work well at 200 percent scale, the fingers were too spaced out, and you couldn't reliably print them with a .4mm nozzle. I used an older model as a guide but I designed these fingers…
Printable model of the Prusament spool for Prusament Refill system. If you cannot use your old Prusament spool, it is possible to print this reusable spool and put the refill on it. The model is made to fit the Prusament Refill spool . -…
I design the model based omnidroid v08 in the movie. Obviously its not 100% replica since I had to modify few part to make it the model reasonably movable. The legs, claws and ball shoulders and head are movable. There are five parts in…
Instructions & Tips Print SF2 SB2 and SB3 parts using brim Printing the bones out of PETG gave me better results, PLA also does the job Use exploded view of skeleton and assemble 4. Glue fur parts on the skeleton start with the big pieces…
I used silver PETG to print it, and added black paint. Since paint does not adhere to PETG well, I covered it in Modpodge. For the wires I used bits of filament and hot glue.
Designed to be a visually attractive desktop display for a doctor friend. Bones have a duct inside for a thin wire (~0.6mm) to be inserted, forming an armature that can be used to pose the skeleton. Skeleton is CT scanned - though minor…
spider-man super poseable
Introducing: Omega-Man! The fully poseable action figure! Omega-man features 14 points of articulation, and can be made from mostly PLA. The Omega connectors should be made from something more wear-resistant like PETG, ASA, or ABS to…
Inspired by ishikawats Articulated Roach: https://www.printables.com/model/1435384-articulated-roach I wanted to make a less...controversial insect. I recommend: Good bed adhesion! 0.25 layer height is fine Fresh filament (old ones might…
This is a minimalistic model I made in Tinkercad for a poseable dragon. I was inspired by Dragon action figure and Stormcleaver Dragon . If you want to print the parts individually or make changes you can find my V1 Tinkercad files here…
This is a fully articulated 3D printed fox with flexible joints that allow smooth movement of the body, legs, and tail. Designed for easy printing without supports, it can be printed in on piece. The model is perfect as a fidget toy, desk…
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The special feature is that the buckle can be mounted without having to cut the loop band. Due to the screw used as a retaining pin, the buckle…
It's a printed toy that the arms can be moveable
Reuseable Cable Tie / Zip Ties. 3 styles (wide, skinny, screw mount).
A faithful recreation of the cute player characters from Big Walk. Broken down into individual color pieces so no multi-material capabilities are required. The character stands at 10cm tall at 100% scale. **This is a work in progress. I…
Here you have a heartwarming little, addition to your holiday decor – A charming ornament, perfect for your Christmas tree. This cute little bird features movable wings and head, allowing for lifelike movements that make each bird look…
this is based of the minecraft enderman and it its made to be a toy or a statue to just have in your office
Eye holes, pivoting jaw, and segmented into parts for assembly
Just Go On Tinkercad And Look At The Model, Idk How To Describe Or Post A Picture On How To Build Certain Figures!
Modifications -slots for moving ears -choice between eyes and no eyes -remade jaw mechanism -thinner model print faster
This is my first attempt at making a poseable action figure starting from an xps file and ending up with a printable stl. I am a big fan of the Resident Evil series and I decided to make this just after Resident Evil 2 remake was…
My daughter wanted a new pencil case. She is quite keen on 3D printed objects, and so we designed this one together. The OpenSCAD file allows you to easily change the size, as well as the text on the lid/ruler.
MODULYR - a poseable action figure built on the thought of modularity in customization and ease of remixing. It has 26 points of articulation for pose-ability and display. Using an attachment key system to attach armor pieces to the base…
A Jackson Rhoads guitar for the poseable skeleton model found here and elsewhere. Use supports for neck.
I couldn't find any design for a printable hairbrush that works well so I designed one myself. The bristles are printed sideways to give them strength. This model will take roughly 10 to 12 hours to print and only about 70 to 80 grams.…
I created this model by hand using Blender 3D, with the help of two reference images! Also, yes, you are definitely free to modify this model... just do not sell it online, only in real life, as a toy or model, etc.
My best iteration yet. The connections pop into place and have a firm connection, no accidental disconnects from swiveling like in my early figures. Joint movement is smooth like butter, (if only somewhat tough in a few areas) and will…
Create your own articulated figures for 3D printing by incorporating these proven & tested articulation parts. Dany Sánchez of OpenFigure3D developed these in 2020 for the first OF3D figure, Iron Man MK3 , and are also used in Samus from…
Thinned the walls and made it flat on the bottom to make it easier to print and use less filament.
I mirrored all the parts and saved them to separate files for easier printing. I recommend using the supportless versions and using generated supports instead. I'd like to create my own custom supports for the body sometime, but that's a…
Master Chief armor and MA5B accessory for the MODULYR figure system. The armor was adapted from Marcus Lehto's MkV redesign. This design uses the same system as my original:…
This is my wooden coffin I made for Halloween. It has wooden tectures on outside, so it looks like real wood. I printed it in PLA brown, but woodfill would be even more realistic. The skeleton has movable joints, which makes it fun to…
When I printed the original Carbon 13 poseable hands there were two problems with it: 1, the pinky finger joint isn't connected to the hand so it just falls off. And 2, I couldn't attach the thumb to the hand. I decided to fix it up a bit…
Remix of the reusable spool for the Prusament Refill System with enlarged holes for the Bambu Lab AMS Lite. The new holes have a diameter of 53 mm, as the original 51 mm holes were not large enough for the Bambu Lab AMS Lite, which…
This is a simple poseable banana figurine, it is a PETG print and takes about a hour and a half and twenty grams of filament. Print two of the arm pieces and and two of the leg pieces. The banana body needs supports. make sure that you…
Meet the Flexi Baby Cow, a charming little cutie that’s both playful and flexible! This adorable farm model is designed to move freely, making it a perfect fidget toy or display piece. ✨ Features: ✔ No supports needed – Print-in-place…
Poseable hands for Carbon-13. They are currently scaled for 500%, but should function down to about 200% (40% of this model size), as long as your printer is dialed in. I got a lot of 'What scale of this for my <Percentage> Dummy 13?'…
This is an extremely detailed scale model of the M/V Seabed Prince (IMO 9489651) , a real subsea research and support vessel, originally built in 2009 by Båtbygg AS, Norway. The vessel's design is specialized for exploration operations,…
Remix of the Poseable Robot Hand.
This model is almost a remake of DarkMemeGod
I wanted to test a new (to me) method for hinges. In addition, I received feedback on storage ideas on one of my other models. So I settled with this design. It is a model (or several combined ones that can also be used separately if not…
cabeças do spiderman e venom
I created this clock face for my Uncle who is a retired Navy Seabee. I created it in Fusion 360 then exported the 3mf and painted it in Orca Slicer. There are probably better ways to accomplish this but in the end it turned out really…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
Monster from the horror-themed, now barely functional MMORPG Requiem: Bloodymare / Memento Mori / whatever. Multi-part kit with variations. I didn't manage to import working animation files, but I wanted to have a bunch of different…
Jack Skellington poseable/articulated hands from The Nightmare Before Christmas I made these to replace my wife's originals, which were made out of PVC and elastic (and which were awesome and held up for like 10 years). I've included…
Bumblebee (assembleable and poseable) with a new design. It is recommended that this model use the color scheme of the original generation, with only the tail seam and head being movable. It is suggested to use FDM printing; no testing…
Conch was easily my favorite character of Gundam GQuuuuuuX. He's just so damn cute, and I needed to have a little 1:1 scale version in my life. The only other models I could find were some AI slop, so I decided to make it myself. Conch is…
It's a simple poseable clock design. It can be used just about anywhere and is really inconspicuous (if you print it in black and white ;-) ). It is highly customiseable (change the supportplate or the faceplate with your own logo or…
Just a remix of the base that I think prints in a better orientation. See the original model for the lid.
This box is used to store knitting needles. The lid is snapped-on the base, and it features latch, so the box can't open by itself. Best printed in PLA using 0.4mm nozzle. Included 3MF file contains prepared text positions for customizing…
Robotic knight I made as my final project for a solidworks course.
a dummy 13 version of Commander Monnk from the clone wars animated series.
Plane used in James Bond movie The Man With the Golden Gun Category: Vehicles
Diplodus sargus — The White Seabream 🐟✨ The white seabream (Diplodus sargus) is one of the most familiar and iconic fish in the Eastern Mediterranean. I’ve seen it countless times while snorkeling — it’s everywhere, yet somehow never…
An improved wall sign which allows rounded ends, the radius of which is specified as a percentage of the signs height, 100% being completely round ends, lower values allow stepped in lobes to be created. Added support for left, right or…
A small box in which you can store things.
Fancy creating a fun light? Well look no further! I saw a similar wooden lamp and thought, as many of us do, I could print that… so I did. Main Body 1x Body Left 1x Body Right 1x Head 4x Leg If you wish to make a dear or a floppy eared…
These were a great help for putting up thin SlateLite tiles, for which the regular leave-in-place spacers are too thick. First attempt was the 2,4 mm thickness, but these looked too thin for large (600 x 300) tiles and so I adjusted to…
Customizable Reuseable Spool My solution to the plastic spool waste once you have a filament addiction. I only use refills but I don't have any BambuLab spools or Masterspools laying around. This is a spool that allows you to easily load…
Fully Posable Batman Using Magnets. There are Two Sets of Heads Including, Masked Batman and UnMasked Bruce Wayne. There is also two Sets of Hands being Open Palm Hands and Closed Fists. Assembly is Required. I believe the entire figure…
This was created to mount hand soap at The Little Cardboard Cafe (Melbourne) and is OpenSCAD based so easy to customize for your specific bottle It supports by default bottles up to 75mm in diameter and has a hole in the middle for easy…
Reuseable filter cartridge that replace Marina Slim filter cartridge s10-15-20 This is a cost effective cartridge that i've been working on for my fish tank. You can use Filter wool or cut piece of a filter pad. Approx. 1cm thick ( 3/8…
Based off the Aranea Membri from kane pixels the backrooms, this is a super easy to assemble poseable figure of said monster( planning on eventually adding more detail and adding skull variations)
Inspired by the work's in Brian Sum's AFTRMRKT, I just wanted to design an articulatable robotic hand to help grow my CAD skills. Not in love with the final result - but I learned alot. Feel free to use however you like. I printed the…
Meet the Flexi Baby Opossum, a charming little cutie that’s both playful and flexible! This adorable model is designed to move freely, making it a perfect fidget toy or display piece. ✨ Features: ✔ No supports needed – Print-in-place…
A 3D printable elf rising from a seashell pedestal, with wave crests curling around her. The water arcs are thick, designed to print solidly in one piece. Model was tested in Orca Slicer for printability. Just scale it up to reach the…
This is my solution to a re-useable spool. For more information, photos and print details please visit.... https://logicalplanet.com/ I really appreciate any comments and feedback on how it prints for you and if any revisions are needed.…
This benchy sunk to the bottom of the ocean floor, split in two, and now lays there. Happy printing!
Not poseable hands for Dummy 13 500% and bigger
This is a set of coasters with a matching base designed with the Navy Seabees logo. The standard profile includes a set of 4 coasters printed with a 0.4 nozzle. There is a separate print profile with the base on one plate and the outer…
Originally designed to be a 30mm to 75mm one,but fel free to customise it!
Gridfinity IQOS holder, charger useable, 2 packs
This was meant as a practice piece for myself to learn learn the basics of creating 3D-Models for printing. It is a poseable figurine of the Player Character of the videogame Noita. https://noita.wiki.gg/wiki/Min%C3%A4Printed at full size…
US Navy Seabees Coaster Set With Holder 100mm
This case perfectly fits a Roli Seaboard Block, a Lightpad block and a smaller block- perfect for keeping these little modular things together on your desk/during transport. Too big to print on most printers, you might have to split it…
Android™ is a trademark of Google LLC. and Dead Zebra created the figure that I based this model on. You absolutely MAY NOT use this model for personal gain ($$$). The Android robot is reproduced or modified from work created and shared…
This is a wall mount for LED pucks with a diameter of 79mm. PETG or PLA etc. with 0.4mm nozzle and 0.2mm layer height, infill 15% We wanted to use the wonderful designer Lithophane Moon Lamp by Frank Deschner…
Works in all regular doors inside your house.
I wanted to create something similar to the mechanic from a hiking pole, but wanted it to be fully 3D printed. Thus I came up with this model. The height can be cut to your desired length. I upload the tested STL files. Assembly: Start…
Meet the Flexi Baby Unicorn, a charming little cutie that’s both playful and flexible! This adorable magical model is designed to move freely, making it a perfect fidget toy or display piece. ✨ Features: ✔ No supports needed –…
Poseable Figurine with stand to show off Stand and figure are not connected, so the figure may fall if not positioned well. Thank You!
A spool that uses universal mesurments to be able to use refils, print the 2 sides and then the 3 middle parts, screw in the first 3 parts with one side then place the refill inside then add the second spool part and screw in 3 more…
poseable dummy 13 hand for scale 345%
