170 models
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Summary This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE Additional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stl Assembly (See Pictures): Adhere Frame Base Pad TPU to Frame.…
15 and 23cm metric ruler with "transparent" letters and digits.
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
I created the 3d printable Prusa Research logo to make my Prusa i3 MK3 IKEA Lack enclosure by user Cisardom. look better than it already does. We all know i did not design the logo but i could not find one to print so i made one myself. I…
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
Let's go on another search and rescue mission. To support this task, I present SAR that is optimally prepared for it. It swims very well and has a small dinghy for direct support which can be quickly lowered into the water. So that there…
3 side panels: 440mm x 460mm 2 door panels: 220mm x 460mm
A simple stamp with logo of Prusa research.
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
I created the 3d printable Prusa Research logo to make my Prusa i3 MK3 IKEA Lack enclosure by user Cisardom. look better than it already does. We all know i did not design the logo but i could not find one to print so i made one myself. I…
This gcode will help find the correct z offset for a 3D printer's nozzle. It is a back and forth square (hence “oxplow”) that begins at -0.1 mm below the current nozzle offset and raises it each row until it ends at +0.1 mm above the…
--UPDATE-- I realized in my initial upload I only included the latest version of the lid, which has dividers between the samples holders. I have now included the original flat lid that has no dividers in case this is useful for you. This…
Prusa Research logo in 3D. 5mm high.
Would you like to know, how to create your own puzzles? Read the article: https://blog.prusaprinters.org/print-your-own-3d-puzzles/
I did not like the base meeples and research tokens. Please feel free to use them. Each meeple, I like to call them meepologist, comes in two parts, hat and body. Makes printing easy. The research tokens I also print in two sections, a…
Printed CORNERS for the hexagonal shelf we had on Prague Maker Fair 2018. We used it to display printed models. 10x10x160mm Aluminium sticks are used for prisms. Prisms are secured by hot glue sticks (of course, what else...). All the…
Company welcoming wall mosaic. The original piece is placed on the wall in Prusa front desk / Prague. It is fully 3D printed from white and black PLA material. Postproduction was made by filling spray and iron look color spray. I scaled…
This model is compatible with the lego system.
Lost Ruins of Arnak is a fun game but I have no clue why half of the game materials are amazing (arrows, jewels, tablets) and the other half is trash. Thanks to Virral for his great replacements for the cheap resource card board tokens .…
The origin is from @Maxim7745_280394 This is a test print to help fine tune a printer nozzle's Z offset. It prints squares that range from -0.05 mm to +0.05 mm in height. See picture for the square layout. All gcode files are meant for…
Designed this print to help me dial in each location in a 25 point manual mesh bed leveling grid (individual offsets can be edited). It is an improvement on my previous test pattern as it now searches for the correct Z height when…
This gcode will help find the correct z offset for a 3D printer's nozzle. It is a back and forth square (hence “oxplow”) that begins at -0.1 mm below the current nozzle offset and raises it each row until it ends at +0.1 mm above the…
Immediately when I saw this maker coin for the Prusa Community's December print contest I knew I wanted to print this with my MMU2.0. Boba Maker was kind enough to share the files so I could do just that! This should be a very easy print…
This model is compatible with the lego system.
I printed in PLA at .2 layer height.
No level 3 dormitory is complete without a Black Mesa Beverage Podium and Containment Tool (B-PaCT)! Currently available in Lambda Orange and Hazard Course Green, coming soon in Calhoun Blue. Contact Black Mesa Manufacturing to get yours!…
Pro všechny milovníky KCD2 jsem vytvořil model králíka, kterého pravděpodobně znáte ze hry. Pokud byste chtěli model zmenšit, doporučuji tisknout jej s 0,2mm tryskou, ale nemusíte nutně.…
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. While the current diagnostic…
I was looking for a good injection pen stand and was checking everywhere, what was available for printing, but felt like nothing was satisfying my interests. I wanted simple stand, that would hold majority of injection pens, will not flip…
Im thinking about designing my own Noozle Cooler for the Nextruder V6 Nozzle Adapter. This way i can use it in my MK3s
Buck Rogers in the 25th Century - The Searcher - 1979-1981 3D printable model.
The two parts for the 2.5uL ejector can be assembled in your slicer by importing one as a “part” of the other. The ejector model can likely be modified to fit the 10uL Research Plus pipettes by removing some of the “middle” section of the…
Cover per bobine in cartone per filamenti KIT RESEARCH. Supporto stampabile per bobine in cartone.
Prusa Research Callibration Cube
This is a fully detailed model of the German polar research station Neumayer III , operated by the Alfred-Wegener-Institute in Antarctica ( https://www.awi.de/en/expedition/stations/neumayer-station-iii.html ). Built entirely on ice, it…
Simple insert to organize the box for The Search for Lost Species. The timing tokens can be left in the boat and covered with the BoatCover, which friction fits quite well. Print one of everything except for 4 of the player boxes. I laser…
Tray to quickly search through assortment box contents and pour back. The opening is designed for 49x49x70 box with 45x45 opening (Festool FES-498038). Desgined to fit on 180x180 print bed like my Prusa Mini+ Onshape document:…
3D printed coil and case for the (slightly modified) Clone_Pi_W metal detector. Design from : http://meandr.org/archives/3900 , originally from Andrey F. (fandy.front.ru). Added a potenciometer for volume control, and the 12V battery is…
These are storage trays for Award tokens, Citation tokens, and Research tokens found in the board game Weather Machine. While the box comes with a nice storage insert, the loose tokens themselves can be hard to get out of the insert.…
ATTENTION: BATHROOM CAMERA IS FOR RESEARCH PURPOSES ONLY, novelty sign Category: Signs & Logos
A remix of the Prusa Whistle… Added a loop to attach a ring so that it can be added to a lanyard. Also modified to have an open side with a lid that can be glued on. This allows for a “pea” to be added to change the tone and resonance. In…
PRUSA Research Rocket Edit - 19.09.2022: IMPORTANT - After realising that there were some issues with the mechanism's functionality. I have uploaded files with a “Rev.” (with subsequent revision number) in the file name. If you have…
JN-66 : Jedi Temple Research Droid
I was looking for a new cover for my Samsung Galaxy A7 and obviously had to create one with the Prusa Research by Josef Prusa logo to fit with all my other stuff. Update 5/24: I replaced the design with a new and improved version. The…
A diving line spool for among other things SMB, search, navigation and soon. suitable for aporx. 30 meter (100 feet) of nylon line. Edit: Included the step file, by request, for easy modifications of the design. Print Settings Printer:…
200x200x400mm Trash can. Probably not the cheapest trash can but i wanted to try something with big volume and needed a new trash can. Printed with Verbatim Black and White PETG 0,30mm 3 Layer and Handle with 0,1mm 3 Layers. The handle is…
layer 0.2, first layer 0.2 at a height of 1 mm (layer 5) pause or change the material to another color. I used a combination of yellow in the background and blue for the information graphics/text It is of course possible to change the…
ATTENTION: BATHROOM CAMERA IS FOR RESEARCH PURPOSES ONLY, novelty sign Category: Signs & Logos
This is a realistic model of the German polar research station “Neumayer III”, operated by the Alfred-Wegener-Institute in Antarctica ( https://www.awi.de/en/expedition/stations/neumayer-station-iii.html ). It is mainly created based on…
Thought it would look good with the Prusa Research Logo embedded in the lid. First test print I had some z-axis issues and aborted, recalibrated and tried a small section of the logo/lid part as a test, and had some issues with adhesion…
Hello all, When I got my first MK3 printer with MMU2. The first think I printed was the Prusa Service Parts Box by Tomson ( https://www.printables.com/de/model/66338-prusa-service-parts-box ). So I was able to store all my service parts…
I created a 3d print Prusa Research by Josef Prusa logo for you, the color combination is up to you from 1 color to 3 color combination. MMU2S you don't need I am very much looking forward to your printed colour combinations. (•‿•)
I couldnt find a dual color logo that printed on the same layer. This is my take on the logo and the best print settings I've found for the mmu3 on the mk4 Hilbert curve on the letters, arquimedes on the plaque. Change to your desire. 3mf…
Hello, this is BRRDS, (Best Rocketry Research Determination System), a high-power rocket developed at NCSSM over the past 3 years from 2019 and launched in late 2021. The purpose of the rocket was for research but really being able to go…
Get the whole set! https://www.printables.com/social/336804-triple-g-workshop/collections/450223 Quick Guide to changing filament~ Have some paper to push away extruded filament. That's why I always set up the models on the left. When the…
This is a remix of Nevzat778's nifty player box for The Search for Planet X . I adapted the model to have a lid to help keep everything in place better, and I made the area for the pencil wider so it can accommodate a dry-erase marker. (I…
PLA 0.15 ~ 0.20mm 210°C 4 perimeters gyroid 15%
Hello everyone, Here is my design for a simple scent box for a dog. It is meant to fill with a desired smell and teach the dog to find it. Ideal to provide mental activity for your dog on rainy days ! Here are a few tips to learn your dog…
Description This is a spool holder with buffer wheel. No filament load/unload error and easy to use. Version 5 - Update 2023 02 02 Fix and upgrade bearing stop, which will improve the stability. Version4 - Update 2022 09 13 Benefit: No…
Several people in the comments of the original model requested an STL file instead of only the gcode. No changes were made to the original model design.
Search Token for Mansions of Madness 2nd Edition. Print Settings Printer: Prusa I3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Games
A design for a lake sediment trap. For more info: https://www.cartesiancreations.com.au/a-3d-printed-diy-lake-sediment-trap/
This organizer is meant to be used with the great tokens designed by PEZ_FPV over at Printables. https://www.printables.com/model/219421-the-search-for-planet-x-game-tokens/ It also holds your player token, 2 target tokens (download…
Search and rescue basket in 1:48 scale for the fellow modelers Print Settings Printer Brand: Anycubic Printer: Photon Mono Rafts: No Supports: Yes Category: Model Furniture
Dog Sniff and Search Tool, abbreviated DSST If you have a dog that loves to sniff out and search for anything like mine does, I'd like to introduce you to the DSST. This tool allows you to fill and hide a spice of your choice (I use…
Just a little adapter to allow a Televue Sol-Searcher to sit in the finder dovetail on a Sky-Watcher telescope. Mine is an Esprit 100 but this will likely work in other models. All pretty obvious except that the F360 source references a…
Buy me a cup of coffee if you like what I do : paypal.me/DavidBashaw992 You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. Design Concept The…
Search and rescue basket in 1:48 scale for the fellow modelers
Update 11/5/2022 Added "round three fingers", "round four fingers", and "round five fingers". These are not parametric, but they are now easier to grip and less slippery, so I consider these models to be the final form. 「round three…
I made a remix of the awesome Mandalorian and The Child Ear Saver by Dude! My design is slightly bigger and is best suitable for adults. Print instructions I printed mine in Plasticz PLA Flex Black and Prusament PETG Orange in 0.15mm…
Z offset search remixed for Ender 3 with UBL (M420S1) and a the post print cleanup from Cura
Some upgraded tokens for the Tleilaxu tracks in the DI: Immortality expansion. I printed these with a .02mm nozzle - I don't know how the fine detail will come out on a larger nozzle. Print Settings Printer Brand: Bambu Lab Printer: Bambu…
The Face shield is designed by Arbi Design, Inc. (Manufacturer of Cookie cutters at CookieCutz.com, inspired by Face Shield design of PRUSA RESEARCH). The shields are designed, manufactured, and donated to HELP doctors, nurses and medical…
This just removes the crossbars from the spacer in Isaac Rattey's The Search for Lost Species insert.
A simple, elegant, and functional keychain inspired by the world of 3D printing. This compact design features the Prusa Research logo embossed on a clean rectangular base—perfect for fans of the brand and RepRap technology enthusiasts.…
This is a remix of the corners used to join the Lack tables together. The corners have the slots for plexi-glass and the hinges removed so they can be used to stack additional Ikea Lack tables under the enclosure. This way printed parts…
My son borrowed my whisper stove and melted my plunger. This replacement works. Try to save the plunger cap and seal from your old plunger. I use a .2mm nozzle with ultra high detail and PLA. I am not sure which material is best with the…
Privesek Na klice Prusa Research
A mechanical key cap with a magnifying glass icon that I use for search. Print Settings: Print the 3mf file for correct supports.
Prusa Research by Josef Prusa phone cover for the OnePlus 3. Print instructions Print with logo side up! The cover is slightly bent so can't be placed flat. It's also recommended to set the infill to 100% for extra strength. The test…
Im thinking about designing my own Noozle Cooler for the Nextruder V6 Nozzle Adapter. This way i can use it in my MK3s
Prusa plate, ideal for dual color printing can be used as testing file
A prusa research tag for your bear conversion 2040 aluminium extrusion that just clips in place, I remixed this from Tomson's endcaps :) Printed in PETG but PLA etc is fine if not in a warm enclosure. Thanks all
Show a little Prusa Love with this handy desktop tray. Full size version will fit on most MK3S+ and similar sized printers, Mini version is scaled to fit on the Prusa Mini.
My daughter has the Search 'N' Protect Eve figure, but the clear mount was broken that allows EVE to appear to float in air. This model connects to the figure and holds it up, so it appears to be floating once again. It needs to be…
Benefit for this upgrade: 1. Support 9 filaments 2. Compatibale with original MK3/MK3S/MK3S+ extruders 3. Easy TPU Multi-Color printing 1000 TIMES FILAMENT CHANGE TEST & A MUMMY PRINTING(PLA & PETG) TPU MULTI-COLOR PRINTING IMPLEMENTED IN…
Gizmonic Institute - Research & Development License Plate Frame, MST3K Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 25 Category: Signs & Logos
this is a Prusa Research bed scraper that u can use to scrape off bed support or other debri on the print bed of your 3D printer.
Waiting for the day Prusa Research releases a spool holder? Well the amazing researchers at prusa reasearch have not been given enough gummy bears to make one yet, so this will have to suffice! Original design by MMDK, thought the no-logo…
Furniture Handle - Prusa Research Ornament - I recommend color change printing: orange , white, orange, black Ornament - I recommend color change printing: orange, black, orange, black You can strengthen the mount, handle and ornament…
Start the bookmark with the prusament orange then switch to black after 1 mm. The Nozzle might need suports to be succesfully printed.
Replacement battery cover for guitar Sonic Research Turbo Tuner strobe tuner, model ST-122. I recognise this is a niche design but perhaps someone out there will find this useful if their cover breaks. I strengthened the locking tab…
Deck box for the search cards in Mice and Mystics. Designed to hold all 71 search cards sleeved in Ryker sleeves . Interior Dimensions : 67mm (W) x 57.6mm (D) x 93.4mm (H) Extras: 4x D3H1 Magnets from K&J Magnetics
My i3 MK3S+ didn't seem to sound consistent as it ran full travel so I decided to do a little experiment. How does the motor noise change based on the speed. I have added a pdf of my findings as well as the 3 G-code programs I created in…
The tip ejector part on Eppendorf Research Plus P20 (20 μL) micropipettors tends to break quite easily. I designed this replacement part. Fit perfectly right off the printer when “Hole Horizontal Expansion” was set to 0.0 in Cura.
Ladies and gentlemen, fanboys and fangirls, I present to you the ULTIMATE Prusa Print for your office! Beautiful (I mean Josef's face is on it, duh), aesthetically pleasing and extremely functional! To give a bit of a background to this…
Search Engine Spam Awareness Coaster I love these contests, but I fear they will spam the Printables Search Engine with so many search terms that only describe coaster motifs to make it virtually useless. (Replace “coaster” with the flash…
