The source marked this model as adult content.
- Downloads
- 391
- Likes
- 113
- Rating
- 5
183 models
Albert-Ernest Carrier-Belleuse was a prominent French sculptor and ceramicist of the 19th century, renowned for his eclectic style blending realism, naturalism, and decorative elements. His works often incorporated mythological and…
This 3D printed Selfie Stick is 99% printed, with the only additional components necessary being a bluetooth remote shutter (The model is sized for this one:…
Upgrade selfie stick v2 for Radiacode102/101. This spacer-joint allows a smooth change of the RC102 mount. https://www.printables.com/cs/model/552255-radiacode-102101-selfie-stick-v2 Installation: if I already have version 2 printed and…
Prints in place, it has a hole in the bottom for an LED tea light, should hold in place by friction. I recommend printing with 4 walls (so the lithophane part is solid) and drop the model 2 mm below the build plate for a flatter bottom…
This is feet (legs) for the Insta360 invisible selfie sticks, remixed from Mini Tripod 150mm by DiAleksi. With this, you can give your invisible selfie stick (monopod) feet so that it can stand the Insta360 camera upright. I use this for…
Dummy 13 needed it's own phone to take selfies of it's poses. You'll want to use Tree supports for the hand. Clean them out and a very light brush with a file might be needed. Then the phone should slide right into place. All print…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
A version with a longer coat. You can modify the .blend-file with blender to achieve arbitrary poses. All the poses of the Remix-original ( https://www.printables.com/model/80597-customizable-woman-with-coat-187-scale-h0 ) are available…
Minimalist Female Sculpture – Contemporary Home Decor
Razítko může být vícebarevné. Stamp can be multi-coloured. Razítko je vytvořené z pěti snadno tisknutelných dílů s minimem podpěr (doporučené podpěry a orientace při tisku jsou vidět ve fotogalerii). Netisknuté díly jsou dva - a to…
This 3D printable model offers a playful and modern reinterpretation of the Statue of Liberty. Featuring a confident young woman in a stylish outfit, striking a selfie pose, it blends classical symbolism with contemporary culture. Perfect…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 130.42x180mm in size The Max Depth is 2.2mm Filaments Used: PLA Elegoo Black Transmission Distance: 0.3 PLA Anycubic dark grey Transmission…
Update Jan '26 Originally, this design was meant to be printed standing, no supports required. However, one of the remixers found that this print orientation made the mount body too weak. While the mount never failed in my testing, I only…
This collapsible print-in-place phone selfie stick is designed for ease of use. It prints in three parts, that are all print-in-place. When you swing it out, it doubles in size for wide-angle shots. The selfie stick also has a rotation…
Quick release holder for Insta360 Selfie Stick. I use it to carry my Insta360 X3 with Selfie Stick attached on my backpack.
I use a little bag with a bunch of mollo attachments on them to carry around my action cameras and accessories. I needed a good way to easily access my selfie-stick without it being in the way and taking up space inside the bag. Decided…
I needed a pipe mount for my selfie stick (Insta 360 X2 One). So I designed one for pipes with a diameter of 50 mm. It's prepared for two M3 Screws an nuts. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter…
Designed this for .1mm layers, you can use my color bender for assistance with the shading. I included 2 sizes but it can be scaled just be mindful of the Z height. I would keep that at 100% Filaments I used IIIDMAX Black PLA+ Repapper…
print this with 20-100% infill and you are going to need a little bit of super glue but other than that everything should work great :)
Cats Taking Selfies Wall Art
This is a remix to fit the base of the older "monopod, made in china" printed selfie stick. I did a fairly shoddy job joining the two parts together so please don't look too closely. Should be perfectly functional though ;) will update…
Insta 360 Selfiestick auf ¼ Zoll Adapter von EngeneerNick. Leicht verändert. Verändert wurde: -Insta360 Logo hinzugefügt -Klemmschrauben für m5 Muttern angepasst -mehr Klemmung (Spalt größer) Insta360 Selfie Stick to ¼ inch Adapter by…
RC102 and mobile phone holder. Necessary material: Selfie stick from Aliexpress - Ulanzi MT-58 120CM Mobile phone holder - any suitable Threaded rivet M5 - 2 pcs Screw with collar head M5 - 2 pcs Threaded reduction tripod thread 1/4" to…
selfie stick ski pole mount (insta360) with 5 mm nuts and compatibility with ski poles with triangular section. Print with PETG, ABS or similar materials. V2 reinforced. Included stl: clamp body Collet and cover must be downloaded from…
Made to support the slefie stick with additonial gopro mounting Category: Camera
If you like my work and would like to see more, please consider buying me a coffee As a teen I loved my digital camera and would take pictures of everything! I really enjoyed low light (amateur) photography and got a tripod to get even…
I made these simple hooks for the IKEA Skadis that fit for the selfie-stick of the Insta 360 X3.
My Gopro Accessories Tripod 3 broke and I had to find solution :D
Statue of Liberty taking a selfie. Feel free to scale it to your liking or to fit your printer. Let me know if you'd like another model, and I'd be happy to design it. More models on my profile. If you like it and leave a like, you make…
Transform your workspace into a contemporary art gallery with this striking modern woman figurine STL file that captures the essence of today's digital culture. This detailed 3D printable statue depicts a stylish figure in a confident…
Introduction The new Insta360 Luna Ultra is a fabulous camera with one outstanding feature (other than 33MB stills and 8k video), a detachable screen/remote control pad! To achieve something like drone shots (where there are frequent bans…
These parts upgrades your simple selfie stick to a two-dimensional gimbal, without adding significant weight to your travel language. I have made it to use my GoPro Hero8 for recording running videos of scenic routes when I am out on…
This collapsible print-in-place GoPro selfie stick is designed for ease of use. When you swing it out, it doubles in size for wide-angle shots or group photos. The selfie stick also features a rotation mechanism when collapsed by turning…
This is a tripod for e.g. the Insta360 invisible selfie stick or any other camera mount with a standard ¼ inch screw mount. It's a remix of @OurAngryBadger very good remix. Required Parts 3× M3x16mm screws 3× M3 nut 1× ¼ inch screw,…
You may need to alter the geometry for a good friction fit with your trekking pole. This takes a 1/4-20 bolt and a trekking pole and combines them as a monopod/selfie stick. This is specifically designed for the invisible selfie stick…
I recently crashed my bike and broke the plastic bracket for my MSW "Selfie" handlebar mirror. Typically, a bike mirror is junk after a crash because the mirror shatters. The MSW mirror is made from metal, which makes it worth salvaging.…
The OnBelt Camera Stabilizer has been updated for taking selfie videos. It takes the camera weight off the wrist for better comfort and reduces the chance of injury. An additional tripod column is attached to the free moving ball joint of…
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE FUNNY SIGNS FOR SELFIES AND PARTIES Add a touch of fun and originality to your selfies and parties with our 3D-printed funny signs! Our signs are designed to make your photos even more…
I saw this model when looking for some backpacking accessories. I like the idea, but I did not want soo much sticking off of the pole as well as giving up the basket, so I designed this from scratch. This mod allows for pictures on the…
This is bobblehead version of my own 3D scan. It was not easy as it sounds. Behind the original model of my head are many hours of sculpting in Nomad3D on my iPad. In the picture below you can see progress from basic shell over model wit…
-layer 0.2 -3 walls -no brim -wall generator arachane and a did whit top surface pattern hilbert curve because a like the effect.. -print in place and scale it how do you want..
This is a selfie stick which can be functional or scaled down to become a decoration
This holder can support 360 camera with selfie stick on backpack strap for traveling. It is designed for aliexpress selfie stick ( https://www.aliexpress.com/item/1005005708969078.html ). Not sure about original insta360 selfie stick - if…
Print without support. Assemble with the springs and nuts of the original selfie stick.
Telescoping selfie stick! For getting those perfect shots on holiday! Super fun and easy print! Place supports under the phone holder portion but not in the telescoping part.
This is a iphone holder for a selfie stick. It allows the iPhone to stand up right to record. I designed it for my iPhone 6 Plus and 7 Phone phone with case to fit in it. Selfie Stick:…
The Phone Prop Fob is a fast and easy 3D Print that will prop up your phone for viewing or taking pictures. The great part of this is that it hooks onto a large keyring allowing you to always have it on the go. You can also use it as a…
A adapter fot the Insta 360 Power Selfie Stick with a 1/4-20 thread insert to adapt the stick to tripods or other camera gear. BOM: -cnc kitchen threaded incerts: 1x ¼-20 thread, 2x short m5 thread -2x m5 screw 10 to 12mm long hope you…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Pro Blue PLA+ Esun Magenta PLA BambuLab Basic…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to White for the rest.
Keychain from selfish machines I made because my friend wanted it so if you are a fan you can make this please like it i need those points for sum free filament 😎
This model is the first (as far as i know) 3D printet selfie stick for an instant camera. It has a mechanism that allows you to press the shutter button at the handle of the selfie stick. The selfie stick can also be adjusted in length,…
This is a picture of Ghostface, better known as the main actor from the Scream parts, doing a selfie after he kil*** someone, created with Hueforge. This Hueforge requires 4 colours and was created with the following swap instructions:…
This is my first posting it was created in Fusion360 and imported into BambuStudio. Easy way to attach Insta360 Selfie stick to a RAM mount. Print it with the ball mount on the top it imported upside down…
Tento model je plně tisknutelný, případně je možno teleskopický mechanismus nahradit kovovými dily. V tom případě jsou potřebné tyto díly: trubka 10mm vnější průměr, 8mm vnitřní pruměr, délka cca 150mm trubka 7mm vnější průměr, 6,2mm…
This is a very robust and practical selfie stick holder for the Radiacode 10x radiation detector / gamma spectrometer. For easier storage and transportation the detector can be folded against the stick to make the package as small as…
Designed a replacement mounting point for my Spigen Bluetooth selfie stick. The 17mm ball mount for easily attaching and detaching compatible attachments, like my Magsafe phone mount. Ball attached with an M4x25 screw, washer, and nut. If…
I just changed the base to allow the screw/bolt to be screwed into place. I also made a recess in the base to hide the screw/bolt head. Use the original feet from the original model.
Capture the essence of modern confidence with this stunning 3D printable STL model that brings contemporary style to your collection. This elegant female figurine showcases a fashionable pose with flowing dress details, perfect as desk…
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below. Filaments Used: PLA SPARKLE BambuLab Slate Gray Sparkle…
Best printed lengthwise for strength
Capture the perfect moment with this stunning 3D printable figurine that brings modern charm to your collection! This elegantly posed female figure showcases beautiful flowing hair and a graceful dress, making it an ideal desk decoration…
Capture the essence of modern beauty with this stunning 3D printable female figure STL model that brings artistic elegance to any space. This gracefully posed statue showcases a contemporary woman in a classic selfie pose, perfect as desk…
Capture the playful spirit of modern culture with this stunning 3D printable STL model that brings contemporary charm to your collection. This detailed female figurine showcases a dynamic pose with smartphone in hand, perfect as a unique…
This is a system to hold a Selfie Stick / Telescope Monopod with a 1/4inch screw mount on a backpack. It is designed to stick transversal outwards of the backpack to achieve the “Angel View” on 360° cameras. You can see an example here…
DESIGN This playful design features two frogs captured in the joyous act of taking a selfie, highlighting humor and camaraderie. USAGE Perfect for home or office decoration, this piece brings a touch of whimsy and personality to any…
Always taking the photos ? feeling left out ? use the new phone mount to velcro to posts, polls, tree branches, and set the timer, or use a bluetooth controler :) Well after design my first phone holder, I starting to thing of ways to…
Designed to fit into the standard honeycomb wall inserts. These are my first 3d designs. Both clips give enough clearance to store the stick with or without the camera attached. The clip for the stock I360 stick holds securely and…
Wanted to mount my Insta360 Selfie-stick to my motorcycle's crash-guard. I designed these mounts to fit my Honda CB500X/NX500 crash guard, but it should fit any other crash-guard with standard 1 inch tubing. The mounts clamp both guard…
Hear ye, hear ye! And see my sparable skills in close up photography... But ignoring this the thing might help you out, if you're having issues with a selfie stick. It's simply to have another base for a selfie stick. I just designed it…
Capture the essence of modern digital culture with this stunning 3D printable figurine that brings contemporary style to your desk or shelf display. This beautifully detailed female figure statue showcases a confident pose in casual…
I made it with PETG, you need about 1inch(2-3cm) 1/4 threaded rod or cut a bolt.
Printing settings layer height: 0.2mm perimeter: 4 infill: 20% cubic
Tired of getting wet for collecting your water sample? Too many shoes ruined by the mud? Scared of drowning in a ditch? Fear no more with the long sample collector stick :D This is a small selfie stick adaptor for 50mL falcon tubes. 20min…
In the USA, brooms, mops and paint rollers use ACME 3/4 - 5 screws (handle male, attachment female). Likewise, camera tripod mounts use 1/4 - 20 screws. This model provides an adapter that allows small cameras with standard tripod mounts…
Layer strength is needed for this to work well. Print on edge and not flat. That makes the layers provide strength to the clip and the forces of the phone will not break across a layer. No supports are needed. Printed in black PLA for…
modifica para poder usar un inserto de tuerca M6 el cual es el estándar para los soportes cámaras y palos selfie
I lost my back scratcher so i adapted one to a generic chinese selfie stick i had lying around. It works perfectly but is dangerous…. it will probably get your leg going crazy lol
This is a little hand with a pointing finger, it has a tripod thread at the bottom so you can screw it to a selfie stick (like this https://s.click.aliexpress.com/e/_c4tlmwon or on amazon https://amzn.to/42tDvZZ ) and use it to point at…
Replacement part for selfie stick from amazon (SelfieShow / Gritin)
Mein Kopf des Selfiesticks ist kaputtgegangen und hir ist der Neue man sollte ihn auf dr Seite Drucken.
Double your Insta, double your fun! This bracket will mount an Instamic to the Insta360 selfie stick; should also work with any other stick with a 22mm diameter. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Replacement paddings for the BlitzWolf BW-BS4 selfie stick. Print with soft TPU with the front face lying down. NinjaFlex worked great. You may add some flexible glue into the sockets before inserting these to get them to stick really well.
Selfinking rubber stamp and stickers holder / organizer
Introducing the (Unofficial) Gameboy Camera Selfie Stick Adapter! Take hilariously poor photos, now farther away! Can't quite get everyone in the photo? With a little ingenuity you now can! This original selfie stick adapter cradles your…
Nothing fancy, print at: .20 resolution, at least 3 perimeters. PLA or PETG works just fine.
To replace the rubber part on the top for preventing the stick sliding of. Print in TPU or TPE with allow thin walls in the Slicer. Category: Camera
The glue in my model was weak, and I missed one side. I created a new one that fits perfectly without glue, and I printed it with Flex A95.
Reuse your old cellphone selfie stick clip with GoPro