Counting matching models…
The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…
now you can make the best gun in the game. uses a 1/4 in dowel as support .may need sanding and gluing. Category: Props
Gunners! Thanks to https://www.printables.com/@TurboPL_2127373 for noticing the error with the original. I made v2 with less color swaps then the original Filament changes to achieve the desired result. Standard coaster size and 7mm…
Can be a Christmas decoration or scaled down to be a keyring for Arsenal fans.
Welcome to Emirates Stadium, Home of Arsenal The Emirates Stadium (known as Arsenal Stadium for UEFA competitions) is a football stadium in Holloway, London , England. It has been the home stadium of Arsenal Football Club since its…
A simple version of the Arsenal canon made to be a desktop or shelf ornament for fellow gooners
Dyson V15 accessory holders can be mounted on a vertical wall or under a shelf, allowing you to create your ideal cleaning station. You have the freedom to position your accessories vertically, horizontally, or at a 45-degree angle, all…
My Schuberth C5 came with a Schuberth SC2 Sena compatible bluetooth kit mounting slot, but I already own a Cardo Edge bluetooth kit and I want it installed properly. As an engineer and owner of a 3D printer I did the most sensible thing…
◾ Size: 20cm / 7.9 inches in width, 20cm / 7.9 inches in height, and 0.3cm / 0.1inch in thickness. If you want to increase the size of the model, you can take it apart and print it separately. ◾ If you want to paint your model with a…
This case plunger design will allow the plunger to retract into the case column with a case in the plunge and not damage the case. NOTE: Currently only available for 9mm. However, I plan on offering plungers for other calibers as requests…
SENA Docking Station for 50S & 30k. Others could work but I'm not sure Fot the 30k you have to put in a micro USB cable for the 50S you need a USB C cable.
This is a simple wrench I have created to assist in opening and closing the Frankford Arsenal Tumbler. It utilizes 2x m5x50mm bolts to fasten the handle to the wrench. There are two different handles for your choosing: Slim Handle - if…
another remake of an older model. used 1/4 rod/dowel for the cylinder and support and some 6mm x 4mm magnets for the cylinder's bullets so that it snapes as you rotate it. Category: Props
TL;DR Print your own socket covers. Motivation Needed some and didn't like the cheap looking white plastic trash optic while good looking ones are extraordinary expensive. I started with the dual one i needed and it was done in less than…
Adding a cone like this to the center increases vortex action and cleaning efficiency. Similar concept to the commonly used funnel mod. Printed in PETG with 3 perimeters for strength, though printing in TPU would make for better…
Shoulder armor parts for making custom royal guards/shadow guards/senate guards from the Force Unleashed game. Included are 2 versions, v1 with no raised ridge and v2 with raised ridge to give you options for how you wish to customize the…
This model is compatible with the lego system.
A simple remix of “The SENATE” (amS feedEr buttoN And proTEctor) printable as one piece. It is basically an overlay that is placed on top of the Bambu Labs AMS feeder button, making it easier to press and protecting the filament chute…
A remix of yzfdmeier's Frankford Arsenal X-10 Case Feeder Shuttle Block . I cleaned up some details that improved the overall fit and finish. Also, added a maker's mark to differentiate mine from his. To use, push the case shuttle towards…
leg and foot armor for making custom royal guards/shadow guards/senate guards from the Force Unleashed game. Included are shin plates, foot armor plates and shin plates combined with boot legs to give you options for how you wish to…
Wrist armor parts for making custom royal guards/shadow guards/senate guards from the Force Unleashed game. Some re-scaling may be needed depending on the size or thickness of your chosen figures arms. 1:6 scale files are for 12 inch…
This amounts to nothing more than saw it being reviewed and said that's a great idea and I can make it. So I've included two versions of it with and without a top cap so you can choose which one you want. Print Settings Printer Brand:…
Keychain versions of the Arsenal Cannon made from Vector images
Arsenal FC shield with flexi legs. Find others shields in my collection https://www.printables.com/@PipodV3D_2293483/collections/1979805
See it lighting up: https://www.youtube.com/watch?v=oOsjZG98mmU (link is fixed now) This is a 3d Arsenal badge complete with a kickstand and light-up letters. You can turn it on and off by simply pressing the back of the badge. It has 3…
Reproduction fidèle de l'emblème d'Arsenal FC, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5 / Dessous…
This is the back plate and shoulder straps for making custom royal guards/shadow guards/senate guards from the Force Unleashed game. Included is the back plate and optional straps (hard to tell if the guards have straps or not) to give…
The support on the Jura E8 is too small for a cappuccino cup Die Auflage der Jura E8 ist zu schmal für eine Cappuccino Tasse It would be nice if you post your make. Thank you
Escudo del equipo de soccer del arsenal para imprimirse en una sola pieza no necesita soporte
This model allows you to mount the Mr. Bullet Feeder collator to the Frankford Arsenal X-10 using Mr. Bullet Feeder bracket, rotated downward, and the stock mounting holes on the extrusion for the Frankford Arsenal Bullet collator. Print…
Hi Amowil, Hope this was what you were after ; ) Cheers Jace
red until 6mm green until 6.6mm white until 7mm finish with gold
I needed a place to put the shell plate and tool head while taking measurements to design and build accessories for my Frankford Arsenal X-10. So, I whipped together this handy caliber conversation stand… The stand is comprised of two…
This beer mat can be printed as a whole using an MMU or similar or print the parts individually and glue them together afterwards. (A well adjusted printer is necessary as there are no tolerances between the parts) I also have coasters…
Anyone who's has spent any period of time with an X-10 press knows all too well that jams that can occur as a result of the shell plate retainer loosening up and rotating counter-clockwise every so slightly. This rotation repositions the…
One of the heartaches of the X-10 Powder Measure is to remove the hopper and drum assembly from the lower part that attaches to the tool head, requires removing 3 M4 cap head Allen bolts. These bushings along with these thumb screws ,…
Das Teil wurde mit PETG gedruckt. Stehend mit ein wenig support. Teil ist Spiegelbildlich. Passt nach dem spiegeln auch auf links. Drucker: Anycubic I3 mega S Sun PETG 0,2 Schichthöhe.
I hated how difficult it was to load straight walled cases like 44, 38, and 357 and I kept trying to lose the included collets. So, I designed collets with a beveled mouth that I can re-print whenever I inevitably lose or break one. I…
On Frankford Arsenal X-10 presses equipped with their bullet feeder, this tool disables the bullet feeder by preventing bullets from being feed to the case and bullet seater die in station 9. To use the feeder block, hold the ridged…
For those that have the FA X-10 bullet feeder, but either don't need the collator or have the collator but wanted a coinvent place to store your case simulator, this is the model for you. You'll need four M5x30mm socket head cap screws.…
Belly armor and belt parts for making custom royal guards/shadow guards/senate guards from the Force Unleashed game. Included is the belly plate and then there are 2 versions of the belt, split with attached buckle as standard then also a…
Hi Maxim this is from an old PDO I have form Pepakura.com I assume this is what your after. But I realised Killonius did a great job here on his one if that helps Cheers Jace https://www.thingiverse.com/thing:2325640/#files
I refused to buy the Sena SC2 Intercom. I already bought a Sena 60S and want to use it with my new Schuberth E2. So I did the only sensibel thing and printed my own. It uses the exzellent Schuberth SC2 replacement Cover from guidosenff .
Ich war von meinem alten Anschlag leid, deshalb habe ich in den originalen Anschlag von Festool ein M5 Gewinde geschnitten und Langlöcher in den Anschlag vorgesehen. Bitte siehe Bilder I was tired of my old fence, so I cut a M5 thread in…
Cookie cutter for Arsenal Logo. The Manchester United is also on my Profile.
requires the precision disc requires adding weight between the disc and the topper. I used 2 quarters requires removal of the left factory clear plastic (I think, haven't tried to put it back on) Do not try to print the STL with the whole…
Printed 0.2mm, 3 Walls on it side with tree support and a brim.
This wall mount works for the Sena 20, 30 and 50 series as they all use the same cradle style. Most will want the double mount but I needed a triple so it is included. I printed it laying down and used no supports on my Creality CR-6SE.…
Explore and use this detailed 3D model of a full set of Cuisenaire rods , complete with a storage box. This educational tool, also known as number rods , is perfect for use in math education and visualization projects. The set includes…
I do a LOT of reloading and just purchased another single stage press, the Frankford Arsenal M-Press to supplement my progressive presses. So far I like the press and the ability to easily swap dies in a matter of seconds. What I don't…
Mounting a Sena 10S to a Nolan N87 without reaching for the 3M double-sided tape The Nolan N87 has a quite elaborate outer shape and no allowance to mount a Sena 10S in any sane manner with the provided Brackets. This Adapter fits the…
I got a second hand Sena SMH10R headset that was missing the battery clip so I made my own. In this case fitted on an i90 helmet, but it should fit any HJC helmet that is prepared for use with Smart HJC. Keeps the battery for the Sena…
Bullet feeder plates that fit the Frankford Arsenal Bullet Feeder. Rifle bullet plates are not available from FA, and each of the pistol calibers are purchased seperately (with a bullet dop and seater). I built these to fit the collator…
Adapter for Nexx X-Com 2 Intercom Slot (Helmet) to Standard SENA Intercom This adapter allows you to mount a standard SENA intercom to the dedicated Nexx X-Com 2 slot on your helmet. Designed for a secure fit using 2x M3 screws and 2x…
This stand is universal for the Sena 50S Lineup. It's made for showing off or just storing the Sena. Place it on your desk, on your shelf, etc.. It sits nicely, doesn't fall or anything. I printed this in Polymaker Polylite grey, and it…
Lego wheel 30.5mm with the style for the McLareen Sena original wheels
Díl je velmi jednoduše tisknutelný s minimem podpěr, dej alespoň 5 perimetrů. Kamerka drží a pro vycvaknutí je potřeba použít sílu, ale mám na modelu přípravu pro budoucí zajištění, aby nemohlo dojít k samovolnému vypadnutí. Kamerku lze v…
This is the back plate and shoulder straps for making custom royal guards/shadow guards/senate guards from the Force Unleashed game. Included is the back plate and optional straps (hard to tell if the guards have straps or not) to give…
This Holder is made to mount the SENA RC4 remote on a 22mm Handlebar like BMW uses (modification possible, step file included). Use PETG or similar not suitable for PLA.
Ottawa Senators Oversized Necklace Logo that I designed. I hope you enjoy!
Spent primer bottle adapter for Frankford Arsenal X10. Print with 100% infill to get needed stability. Fits standard U.S. sized bottles.
Desk Stand for Sena 50S Remix of the Sena 50s Wall mount by Sebi_Wilhelm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .20 Infill: 20 Filament: Creality PLA Grey Category: Automotive
A meticulously redesigned 3D-print-ready version of the iconic Arsenal Football Club logo. Crafted with precision for high-quality printing, this modern reinterpretation captures the spirit and heritage of the team while offering a sleek,…
Powder Check Die for the FA X10. Plugs into the head and sound the alarm if the charge is not correct. Case activated Uses magnetic reed sensors and some basic wiring. Reed Sensors: $10 - (…
TL;DR Print your own socket covers. Motivation Needed some and didn't like the cheap looking white plastic trash optic while good looking ones are extraordinary expensive. Let's get started This model is very easy to print with any…
Frankford Arsenal kinetic bullet puller wall mount. Use to screws to fasten it to the wall. Category: Other
This is a really fun Ottawa Senators hockey puck that you can display in your house or even play hockey with! Print Settings Rafts: No Supports: Yes **Resolution:** any Infill: 30-50% **Filament:** any pla/any red and black Category:…
This is a Sena product The Sena 50R To be used for bracket, transport case or other.
Simple Arsenal Marking for fun for Russian arms factory famous for AK firearm
Sometimes cast lead buckshot doesn't come out perfect. At trick to get them more uniform is to tumble them in a rock tumbler. However I didn't want to pay for somethin I'll only use once or twice a year. I also didn't want to coat my…
Linsenabdeckung für den Xiaomi Smart Projector L1. Gedruckt in TPU.
Complimentary to Armor Set - here i pulled Large sword and shield. As i used it for MOC skeleton - it seems the best fit is when you print at around 96-99% size - for nice fit i had to shave off a bit of axle with deburrer, hence cant…
The Square Funnel for Frankfort Arsenal Rotary Tumbler (F.A.R.T) fits snugly into the drum. However, it didn’t cause any brass loss from the square box during the filling process. The funnel is printed in PETG, but PLA should work as…
Senana the centipede is your best friend. She has tiny little pointy legs.
English: This 3D print model is a unique shopping cart chip, specially designed for lovers of the Marine Arsenal. The chip is the size of a 50-cent piece, making it compatible with most shopping carts. Please note that a 3D printer is…
Logo Arsenalu na klíče bez nutnosti multimateriál tisku. V Gecode, již nastaveny pauzy tisku. Tisknuto s 20% výplň
I lost my Sena 10S on the highway once when I gently hit the unlocking tab. To prevent this from happening again I designed and printed this. It prevents the tab from going down and unlocking. Printed in Ninjatek Black TPU. Print Settings…
This is a simple, one-piece 3D model inspired by the Arsenal Football Club logo, featuring a built-in ring for use as a keychain. Designed as a single solid print, it requires no assembly and is sturdy enough for everyday use. The clean,…
Outer clip for the Sena headset mount on a motorcycle helmet. works with the SMH5-FM, I am not aware if other models have the same clip. The ruber from the old clip can be removed and placed within the printed model, The thread inserts…
A charging station for a Sena30k and a Sena SMH5 Just put 2 Micro USB cables inside. Ignore the Broken Antenna on the Sena30k
This model is a stick-on wind-screen that works for the Sena R1, R2 and R2 Evo Smart BlueTooth bicycle helmets. It may also work for other Sena helmets but I have not been able to try it on them. Background: My wife and I took up e-biking…
Print Settings Printer Brand: PRUSA XL Supports: Yes Resolution: 0.2 Infill: 15% Filament brand: Overture PLA Filament color: Black Filament material: PLA
Remix of Frankford Arsenal X-10 Case Ejector Guide
Whisk-adapter for powerdrills. Although Bosch also sells mixers, they did not realize that they already made the perfect mixer when releasing their 18V powerdrill series. Maximum diameter of whisk handle: 26mm Requires 6x M3-Heatinserts…
Hockey pucks of Ottawa Senators. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection: https://www.printables.com/@m_collectable/collections/2703845
So I have included bother version of this, with and without the pegs attached. I have taken to printing the begs and the holder separate simply because it makes for a nicer print. As I recently picked up this set I built this to get it…
Need replacement intelidropper tube look no further. Mine came in broken in the box. instead instead of returning i hopped in F360 and whipped this up.
This strainer cap allows you to pour water in one side (using the stock large-gap strainer cap) and wash out all the filth, water, and bubbles through the other side into a sink or similar without losing your stainless steel pins.
