Counting matching models…
Settlers of Catan replacement parts(city, settlement and bridge) I create this things during the last jear. The models are close to the original parts. Print instructions print settings: LH: 0.1mm Nozzle: 0.3mm
Spare part for settlers of catan desk game Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.05mm Ultradetail Infill: 15% Filament: Prusament PLA Wanilla White Category: Games
This is a full set of the roads, settlements and cities that comprise the game tokens in the Settlers of Catan board game. Yes, there are other options out there, but the problem is, that if you want to print a whole set, then doing so in…
Longest Road Trophy - Settlers of Catan
Dakanzla is da' man with his awesome multicolor printed design. Unfortunately, I only have a single nozzle printer and I cannot paint worth a damn, but I still wanted some artistic oomph to my set. I really didn’t like the monotone sets…
These shells have magnets so that Settlers of Catan hexes stick together and the board doesn't get shuffled around. I was heavily inspired by the model this is remixed from, but I made these models from the ground up with the following…
This is a simple upload of https://www.thingiverse.com/thing:4153125 , the Catan boat seafarers by ghostcoconuti . Das ist ein einfacher Upload von https://www.thingiverse.com/thing:4153125, dem Catan Seefahrer Boot von ghostcoconuti .
This is the my print-assembly of the multicolor-prints to store 5-6 Players. Its part of the Catan-2.0 series. STL files are on thingiverse. 2024-05-07: Uploaded repaired 3mf files.
This is a simple upload of https://www.thingiverse.com/thing:2865138 by Dakanzla . From cities & knights 2.0 only the knights and their activator token was taken. Das ist ein einfacher Upload von https://www.thingiverse.com/thing:2865138…
This model is based on the orginial walls of the German 3rd Edition of the expansion Cities and Knights for the game Catan . Its purpose is to protect a city against the robber. Every player can have up to three cities protected with city…
This is a whole set of catan pieces, 4 cities, 5 settlements, and 15 roads. NO scaling or rotation required. I measured a couple pieces and averaged to size. These will match the original catan game with no modifications. Print Settings…
This tray fits cards ~68x45mm which you can find in the german version (Kosmos). Not sure about other versions. It's a remix of thing:4703126, which was made for slightly wider cards from international versions (had to find it out the…
Please like, share, download, follow, rate and all the amazing good stuff! This is the PolyPanel version of my Catan Globe. This prints and assembles easier than the magnetized version, but it has some finnicky friction fits for the play…
UPDATED 2025-04-07: I made a hybrid of this design and the one listed below. The new design is the lightest of the three designs and incorporated positive elements of the other two. Here is the link: UPDATED 2025-04-03: I completely…
Bridge-style roads for use with Dakanzla's Catan tiles. I couldn't get the roads included in his version to print cleanly so I made up my own with easier to print details. I also liked the bridges created by Kakoritz so I designed these…
Please like, share, download, follow, rate and all the amazing good stuff! This is my 3D rendition of the settlers of Catan which uses A LOT of magnets. Warning , this is a project and then some to assemble! If you want something easier…
A metropolis upgrade for the player cities in the German 3rd Edition of the expansion Cities and Knights for the game Catan . In the German third edition the players have 3 metropolises in their player color. However i find it useful to…
This in a simple upload of https://www.thingiverse.com/thing:1360866 , the Catan road spare part by egrojyos . Das ist ein einfacher Upload von https://www.thingiverse.com/thing:1360866 , Catan Ersatzteil: Straße von egrojyos .
IMPORTANT! Watch the slicing tutorial if you do not have a dual extruder or something similar! Description Cards that are roughly the size of the original Settlers of Catan resource cards. The cards, when printed in PLA, feel and handle…
These shells hold the original tiles together with magnets. Each shell requires twelve 3mm cubic magnets, for a total of 228 (19 hexes* 12 magnets) to complete the original game set. If you also want to print the port shells , note that…
I have designed harbors for the 3d Settlers of Catan game that fit into the shapes of the border.
Settlers of Catan is easily one of my family's favorite games. So I set out to create some game piece and card holders as well as desk holders and extra piece sets (just in case something got lost). There are a lot of different sets out…
Please keep in mind → European / German Version → Please check the size ! Box: 290mm x 290mm //Tiles: 79mm wide // Cards 44mm x 67,5mm This is a organizer for all Settlers of Catan pieces. The parts can be connected to one another by…
Wheat tile variation with windmill, Settlers of Catan. Added a windmill and changed the structure. Clint Boyle Holly Springs, NC Category: Games
The original board pieces are numbered in a sans font using a .2mm cutout starting with the upper left section. The expansion board is numbered in a serif font using a .2mm cutout, also stating with the upper left section. Bonus half…
I was making one for a friend, but I was having problems because the original number tray was too solid. Once the original cap was on, I could not remove it easily. Thus I remade/remixed the cap - I added some ledges, which keeps the cap…
Catan board game frames and settlers set.
Wood port for Settlers of Catan. These work well for placing wherever you want. I used a resin printer to maintain the high detail. Clint Boyle Holly Springs NC Category: Games
I created my own figures for the game Settlers of Katan. These figures can be used as a replacement for the original wooden pieces. However, you can use them as a replacement for figures from the reworked edition, if they have become…
Ore Port for Settlers of Catan. These work well for placing wherever you want. I used a resin printer to maintain the high detail. Clint Boyle Holly Springs NC Category: Games
These are small, with nice detail. I used a resin printer that keeps a lot of that detail. Enjoy. Clint Boyle Holly Springs NC Category: Games
These tokens fit into card slots of the Catan Storage set ( http://www.thingiverse.com/make:270114 ). The knight model is from http://www.thingiverse.com/thing:1239437 . The bridge/road model is from…
Largest Army trophy for Settlers of Catan. Have fun hand painting this. Recommend using a resin printer for extra detail. Have fun! Clint Boyle, Holly Springs North Carolina Category: Games
Print Settlers of Catan Pieces -- all of them or just one!
Matterhorn Switzerland tile (ore tile for Settlers of Catan) Designed to be joined to a base. Clint Boyle Holly Springs NC Category: Games
I used Numbered Tokens designed by tvputten as my source to create this set. This is the full 28 tokens for Settlers of Catan 5-6 player expansion. The token letters are on the bottom of the token. A chit tube for storage is available.…
I liked the house-themed settlement piece by Hawk73 but wanted it to be a little larger so I placed it on a pedestal that maintained the 14mm footprint used in Dakanzla's designs and scaled up the rest of the model. Print Settings Printer…
Grain tile for Settlers of Catan, Castle, Clint Boyle Holly Springs NC Category: Games
Hey there, So I found this awesome model of a UFO robber at Thingiverse and decided it was the perfect opportunity to play around and try some transparent filament. I had to edit the stl to break it into separate parts and to add the…
The first three editions of the classic Euro-boardgame “(The Settlers of) Catan” came without a frame to hold the board tiles in place. When the 2007 edition came out with a frame, an adapter kit was also released that's no longer…
Edit_5 09-15-2019 I've added a STEP file for all of the boxes. That should make altering them much easier. Description: I didn't like any of the boxes for JAWong's Setters tiles so I made my own. This is setup for a 3-4 player set but you…
Simple print 2-3 walls 10-15% Infill 3 or 4 Top / Bottom layers Designed to fit these lids:…
Inspired by the 3D Catan board by Dakanzla @ https://www.thingiverse.com/thing:2525047?fbclid=IwAR2PBeg0i4jX0EP-Hk1zYV997yUldjJ_imLfsVrO9ouTlrcakD_cRDQrUhI this is remix of this designer's magnetic base to accept cylindrical 3mm x 3mm…
This is my model of a complete game set for Settlers of Catan in 3D. The only thing you will need other than these prints is a set of cards from the base game, 2 d6, building cost tiles, a robber and longest road and army markers. All the…
Settlers of Catan Player Piece Case
Case to fit the 6 player 3d printed version of Catan. (Dakanzla files) 4x 3d printed inserts to hold the terrain pieces for settlers of catan in the 6 players case I built. Each is sized 143mm x 182.5mm x 84.6mm No supports needed in the…
Case to hold all the player pieces for a 3d printed Settlers of Catan base game set. ( I also have a version for player pieces with the expansions) Player pieces in the case are from Dakanzla's 3d models.…
Case to hold all the player pieces for a 3d printed Settlers of Catan base game set. ( I also have a smaller version for player pieces without the expansions) https://www.prusaprinters.org/prints/124952-settlers-of-catan-player-piece-case…
Grand and Middle Teton tile for Settlers of Catan. Designed to be joined to a base tile. Clint Boyle Holly Springs North Carolina Category: Games
I love "settlers of vatan", but i hate to sort the little tiles of the city improvement every time we play this boardgame. That's why i made this organizer. The bottom is provided with a small groove, so if everything fits, the top should…
Pairs with the Watchurm city model – myminifactory.com/object/3d-print-towers-of-catan-variations-37540 . I made this years ago for my 3D printed Settlers of Catan with custom player pieces. The Tudor settlement was printed with a 0.35 mm…
Printed in PLA, blue to mimic the water. Careful removing to not bend them, a textured sheet works well for this. Print the pair of pieces three times to make the full border.
Remixed to make the hole sizes larger, as mine didn't fit in several ways. Road pieces now 5.7x5.7mm Town pieces now 15mm wide Castle pieces now 42mm long Category: Toys & Games
Me and my family and friends have always loved spending long nights playing Catan, so I set out to make my own 3D board. When I started making this design, I did not have my MMU printer, so everything can be in the right colors using…
These are elevated card trays for the Settlers of Catan game. They stack the cards at an elevated angle for easy access across the table. They are made for 54x80mm Catan cards, but can easily be used for other sizes. The tray is 84mm…
Teton mountain range Settlers of Catan tile- I used it for a gold resource. Clint Boyle Holly Springs North Carolina Category: Games
I designed this broder based on mraisers design for sublimes 3d printed game tiles. Like mraisers mine interlocks using dovetails, My border however is thinner and has a nicely beveled edge. Future design changes will include integrated…
This model is a replica of the dice for the Settlers of Catan dice game. The dice were designed with a side length of 10mm. In this size, the dice may be too small for most FDM printers, so it's best to scale them up in your slicer…
This design is a carrier/organizer for 3D printed Settlers of Catan sets. All tiles, cards, and dice and be fit inside of the original game box. This fits just the general base set. Unfortunately there is not space for the player pieces,…
In my Seafarers expansion pack the ships made out of plastic and not wood. Therefore I did a remix and created a modified version for the plastic ships.
Instead of cards you can use these coins, there are multiple versions of wood, stone and sheep available, choose which ever you like best.
Insert pro všechny, kteří vlastní základní hru Settlers Zrod impéria. Rád tuto hru hraji v sólu a už mě nebavilo všechny komponenty mít uzavřené v pytlíčkách. Chtěl jsem tedy urychlit přípravu a hned si po otevření krabice zahrát. Proto…
Simple coasters I made to match the 3D catan terrain pieces I printed. The idea is for each player to have a coaster in their own color. Print settings shouldn't be a big worry here. Consider enabling ironing for a smooth top surface. I…
Spielmarken für das normale Hauptspiel ohne Erweiterungen. Vorn sind die Zahlen drauf und hinten nichts. Durch Farbwechsel in der richtigen Höhe kann man die Zahlen auch in einer anderen Farbe drucken.
3D printed numbers for settlers of catan. These have the letters to help you organise them & the dots to show the probability of that number. I printed the base of them in a transparent filament so could see the terain underneath them…
Kartenhalter für “Die Siedler von Catan” und das Erweiterungsset “Städte und Ritter” + dazugehörige Aufbewahrungsbox. Der Kartenhalter ist für die deutsche Version ausgelegt, bei der die Karten eine Größe von 46mm x 72mm haben. Gedruckte…
After a game of Twilight Imperium where the map tiles kept getting pushed around slightly and making the map a mess, I wanted a solution to keep the map together neatly. So I learned some basic Fusion 360 and made this design to hold TI…
This is a carry case designed for Mystik738 's version of Catan over on Thingiverse. (https://www.thingiverse.com/thing:2416602) I designed it to fit the base 4 player set perfectly but if you print the extra variants of the board pieces…
Printed on Prusa MK3S+ Layer height : 0.3 mm Infill: 5 % Top layers: 5 Brim: 3mm for the big part
Imperial Settlers is one of the games that we regularly try to get to the table. The original insert is not much good, and it quickly becomes small as soon as one begins adding expansions. We currently own the Aztecs and “Why can't we be…
UPDATED 2025-04-07: I made a hybrid of this design and the one listed below. The new design is the lightest of the three designs and incorporates positive elements of the other two. Here is the link: These are baskets/carriers/boxes for…
If you want, you can help me with designing inserts by donating here: https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8 or joining my club, where I will be posting regular updates and exclusive models:…
A border to be used with the original game tiles (not the printed ones) for Settlers of Catan and the Seafarers expansio
A replacement frame for the board game ‘The Settlers of Catan’ The frame is for the old version with wooden game pieces of 'The Settlers of Catan Cities and Knights' Print it more stable so that it lies flat on the ground and doesn't…
one more box for settlers of Catan Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 0.2 Infill: 20%-30% Category: Playsets
This is a 4-player 10 point game score tracker. Set it out while you're playing Catan (or any other 10-point game with 4 or less players). Advance each player's respective pawn down the row as the game progresses until one reaches the…
settlers of catan board piece holder place holder for catan pieces, holds game card on back
This Remix exchanges the 12x2mm and 10x5x2mm magnets for much cheaper 6x2mm magnets (and M3 nuts), while still being usable without any problems. This remix provides 2 different variants : one using only 6x2mm Magnets, which results in…
This is a model of the new Knight pieces from the 6th edition of Settlers of Catan: Cities & Knights. They are much easier to distinguish than the old round "token" pieces while still being simple and abstract. I've replaced my 5th…
settlers of catan bord rim with cutouts for trading ports they adapt to the existing cardboard Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.12 Infill: 20% Filament: 123 3D Jupiter PLA Blue Notes: settlers of catan bord…
The box is designed for all resource fields for up to six players including the Seafarers expansion. However, the model can be adapted according to your own needs: width of the resource field (hexfield) cardboard thickness angle (from 45°…
This storage solution is designed for the classic wooden game pieces of Settlers of Catan and also provides additional space for the pieces from the Cities & Knights expansion. The box consists of a top and bottom half, which are securely…
number tokens settlers of catan no letters
Magnetic shell for Settlers of Catan special floor card for expansion Cities & Knights
To extend the beautiful set by MioPrint, 3d reference cards/cheat sheets that reuse the same models as the resource tokens. The Cities and Knights recipes are on a separate card so they can be removed if playing without the expansion…
Custom Robber for Settlers of Catan game. Dark. Ominous. Full of attitude. Watch your sheep! 49mm - perfect size for your Catan board game, or scale it if you want to. There's a hole in the bottom for a 10mm x 2mm magnet (for another…
Made a simple x-shaped raiser for the original 2000/2001 catan insert which makes it flush with the upper edge of the box. Also designed a cover/tray for the tiles compartment. Can be used as an additional tray. Haven't tried yet, if the…
I have put together a Settlers of Catan Tournament at work. The prize for winning the tournament will be this trophy shaped like one of the game pieces. The one in the picture was printed without a heated build platform with 30% fill. I…
Card tray with lid for cards from Settlers of Catan, 4th edition. I included a picture of the box so that you could see what edition I have. The trays fit the cards from that edition of Catan plus the cards from the Cities & Knights…
A container to hold the additional tokens from the Catan Seafarers expansion. Very similar to the source number holder, it just has a cut out to show that these tokens are for the seafarers expansion.
Insert pro hru Settlers: Zrod impéria a všechna rozšíření vydaná česky. Settlers: Zrod impéria Amazonky, Aztékové, Atlantida, Rozvět impéria, Síla trojice, Proč se nepřátelit, My jsme si nezačali.
Settlers' Sanctuary: The Ultimate Catan Dice & Card Hub We’ve all been there: a high-stakes roll sends a die flying across the board, obliterating the Longest Road and causing table-wide chaos. I designed the Settlers' Sanctuary in…
A friend of mine lost some pieces and i decided to make him some replacement have fun printing
The normal infill for the box was to small for our settlers of catan card game. So i wanted to create an infill which has - enough room for the extensions - to keep sets separated while stacked Print tips - for 0.42 wall width: 3 wall or…
See my other Gamebound Collection Storage Books here . Note before download: The original boardgame and additional hardware is required . This is a replacement storage box for Settlers of Catan, sized to also fit the 5–6 Player Expansion.…
Compatibility This set of inlays is compatible with the recent box version of the game. The box has a dimension of 29,5 x 29,5 x 70mm . Please check before printing, i made the same mistake :) Also check out my inlays for the basegame…
Since MosaicManufacturing was amazing in their creation of the remastered Catan board game, I thought their creation deserved more realism. That's why I designed these game stones. I hope you feel like you're walking through your hubs…
This Remix exchanges the 12x2mm and 10x5x2mm magnets for much cheaper 6x2mm magnets (and M3 nuts), while still being usable without any problems. This remix provides 2 different variants : one using only 6x2mm Magnets, which results in…
UPDATED 2025-04-07: I made a hybrid of this design and the one listed below. The new design is the lightest of the three designs and incorporates positive elements of the other two. Here is the link: These are baskets/carriers/boxes for…
![Siedler von Catan Marken [Settler Token]](https://media.printables.com/media/prints/155505/images/1457152_7919592a-006f-4b0b-a630-9341bef81297/img_3189.jpeg)
