Counting matching models…
Dimensions (LxWxH) 186,9 x 66,7 x 33,8 mm (100% scale) Basic information The model is divided into 7 movable articulated segments, which grant the model with lifelike movement, and a high range of flexibility. The model was designed to…
No supports required. Just slice and print!! 4 Versions available: Shark_v4_A.stl: Original design, movable jaw Shark_v4_B.stl: Friendly face, movable jaw Shark_v4_C.stl: Original design, NON-movable jaw Shark_v4_D.stl: Friendly face,…
Dimensions (LxWxH) 164,5 x 65,75 x 42,7 mm (100% scale) Basic information Print in place articulated Hammerhead shark. The model was inspired by the Great hammerhead shark, the largest species of all hammerhead sharks. It can grow up to…
ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, there are two different versions available: a “Hard to press in” and an “Easy to press in” version. Choose whichever you prefer, one…
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Clamp your knife in place, fix the wet stone on the slider and just sharpen your blade. This fixture is ready to go with only 3D printed parts and therefore needs no extra hardware. You might add a couple of M3 bolts later (or similar)…
Fishing Rod “Sharky” — THE Perfect Beach Companion for Fishing Enthusiasts 🖨 100% printable – no extra hardware required (except for fishing line and hooks of course) ⏱ Fast print – ready in around 2 hours 🧵 Material efficient – under 50…
If you liked this model and want to support me in creating more like this, consider subscribing on Patreon ! For just $10 a month you will get: All the other other versions of this whale shark including a non-keychain and spotless…
Important! The multicolor version is not designed to be printed in separate pieces and later assembled. If you don't have access to a multi-material capable setup (MMU, AMS unit or similar), please avoid printing the multicolor version of…
My son turned 16 and loves Mcgybeer's "Articulated Shark." So I made him a keychain version of the model. I scaled the design and added a loop to attach your keys to. I also attached the tail to the last body segment and made it so that…
I printed this model on my Bambu Lab P1S using eSUN PLA+ filament, 0.4 mm nozzle, 0.16 mm (0.2 mm for low-poly) layer height, 2 wall loops, 15% infill, automatic slim tree supports at 25 deg. threshold and on build plate only. Since…
Dimensions (LxWxH) 170 x 69 x 37mm (100% scale) Basic information Prints in place, no assembly is needed. The body is divided into 5 movable segments, which allow a wide range of motion, and grant the model with lifelike feel and…
Low Poly Wall Shark Low poly shark with wall mount. With the original scale and spacing, once placed, it measures 395mm. You can use the template to test how it looks on the wall and to easily mark the drilling points while keeping the…
About the tool A simple whetstone knife sharpening aid. Helps when getting started sharpening blades using a whetstone. 4 Different angles for different types of blades. 14°, 17°, 20°, 25°. Common Sharpening Angles: Pocket Knives- 20°…
If you like this one, check out the crocodile version too. Recommended print settings: The tolerances were designed for 0.2mm layer height printing and for the original size of the model. Please use my shared print file since using a…
If you want keychain version of Shark, any of above 3D models, exclusive/new/upcoming models or need commercial license, please visit my Patreon . By joining, you'll gain permission to sell my models, exclusive designs and receive early…
---2024/4/22--- V2 has been released. The strength of the jaw connection was corrected. And, Free 3mf file released!! Cults and Printables for Bambu Studio and Prusa Slicer are now available. This is Flexi Whale Shark. In addition to the…
An articulated shark with moveable body sections, jaw and pectoral fins. It has a hidden slot (as shown in the picture) for adding a keychain. Original size: ~4.9 cm × ~9.6 cm × ~3.1 cm Upper teeth require support materials (see…
🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈 🦈 Articulated shark 🦈 🛠 Print Settings & Recommendations Nozzle: 0.4 mm Layer Height: 0.2 mm Infill: 5% Supports: ❌ No supports needed! 🎨 3 Ready-to-Print Profiles Included: I’ve prepared three…
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…
[Update] ---2023/05/10--- Version 2 with stronger joints has been added. ---2023/05/26--- New Type released!! https://www.thingiverse.com/thing:6046050 ---2023/09/25--- Fixed a defect in version 3 where the joints of the tail and tail fin…
The Bookshark - the bookmark that bites! Be carefull, you bookworms! There is a predator hiding in your books… Easy print, just 0.2mm layer height. Use ironing to get a smooth surface. See my settings in the 3mf file for details. If you…
Description If the “pen is mightier than the sword”… why not have both for insurance? This simple mod to the classic Fine Point Sharpie adds a new aesthetic sure to please your medieval enthusiasts. This does not replace the existing…
ENGLISH Introducing FlexiScraper : the ultimate solution for effortlessly accessing low-profile prints and stubborn support residue. Engineered with precision, its sharp edge glides seamlessly beneath prints straight from the bed. With…
[Update] ---2025/10/07--- Reduced the memory size of the body model. ------------------------------------------------------------------- This is a Flexi Tiger Shark. It can be assembled simply by inserting the head part into the main…
A low poly remix of McGybeer's Articulated Shark, one of the best articulated designs that exists. Like this model? Check out my other low-poly remixes below! Low Poly Articulated Octopus Low Poly Articulated Lizard
A knife in the shape of a shark. You can also use it for unboxing or you can reduce it in a slicer and use it as a key ring. Here is the whole Sharkie family. :-) Enjoy and happy printing!
🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈🦈 🦈 Articulated shark 🦈 🛠 Print Settings & Recommendations Nozzle: 0.4 mm Layer Height: 0.2 mm Infill: 5% Supports: ❌ No supports needed! 🎨 3 Ready-to-Print Profiles Included: I’ve prepared three…
Fun little shark pencil holder! There are 2 different files, one for the mouth and one for the body and they get glued together. The mouth prints with supports on the back side but the body prints without supports. The model pictured is…
All credits to @ Dlpoling onThingiverse | https://www.thingiverse.com/thing:5170258 Easy Print in Place Flex Hammerhead Shark.
Dive into the Depths: Captivating Articulated Shark WITH MOVABLE JAW – A Dynamic 3D Model 🦈🌊 Immerse yourself in the wonders of the ocean with our Articulated Shark, an exquisitely detailed 3D model that brings the awe-inspiring world of…
UPDATE: I created a new, simpler chisel sharpening jig: https://www.printables.com/model/520488-better-chisel-sharpening-jig ORIGINAL POST: My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of…
The original Articulated Shark was a little to wibbly wobbly in the up down articulation for my little nephew to play with. I added some additional parts to stiffen the shark out quite a bit. It is still just as wibbly wobbly going side…
Better Cleaner overhangs! Teardrop shaped hole with horizontal ring edges. Stronger parts! Weak point at the top eliminated. Rounded edges on contact surfaces! Helps reduce friction between the tool and working surface reducing wear and…
Dimensions (LxWxH) 150 x 74,86 x 51,67 mm (100% scale) Basic information The original Articulated Hammerhead Shark gets an update! Thanks to its more stylized and exaggerated appearance, it's even cuter and more eye catching than the…
Meet the Articulated Skeleton Shark – a spooky print-in-place shark created especially for Halloween! 🦈💀 This flexi shark features a dark body with exposed skeletal-style details running through the fins, spine and tail, giving it a…
This remix has been run through Quadratic Edge Collapse Decimation in MeshLab to reduce the number of vertices while retaining the most true geometry. This was done to shrink the file size to under 25Mb, as Tinkercad has that upload size…
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
Remixed Whetstone block, to be used with knife to slide along the block maintaining the correct knife angle. 4 x different angled sliders to get suitable angle. Common Sharpening Angles: Pocket Knives- 20° Hunting Knives- 25° Fillet…
I had made a few of these(original non-reinforced version) for my son and his friends, and was annoyed with the tail popping out. Looked for a remix that was fixed, and found this stable version. Reading through the comments I saw that…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. Waveshare 7inch HDMI LCD (H) Mount…
Baby Shark Clay character kawaii 3D Model
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Knife sharpening helper / guide for 60 x 180 mm whetstones. Remix of "Whetstone sharpening helper" by Rejd (thingiverse.com/thing:2493459). Sliders, slider angles and base plate shape were modified. Max stone height: 30 mm Angle…
Minimalist, timeless bowl in a clear and sharp design. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for…
Support me & Join Printables Club Assembly list of non-printed items for pencil case 2 pcs - metal axis 26( 25 )mm x 3mm 1 pcs - sharpener blade aprox. 6mm x 23mm with screw 2 pcs - M3 12 - 18mm screw If you looking for a bigger version
Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023
Toy suitable for children from 4 years old
Useful tool for getting proper angles during knife sharpening on whetstones.
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Sharpie fine point pens. Print upright with thin part of the adapter touching the build plate. No…
PLEASE USE GCODE FILES ATTACHED IN OTHER FILES SECTION G-codes.zip G-codes were generated using Cura 3.1.0 slicer and tested for Original Prusa MK2S printer, but we also achieved comparable results with a cheap Chinese printers Infitary…
It's that time again. This cute little buddy is available for personal use for a limited time. Find this little sea critter and more of its sea friends in my Thangs , Patreon , or MMF Tribes memberships, happy printing! Follow me on…
It is possible to print the model without supports though results may vary. Some parts of the model can be quite brittle if printed in smaller sizes. The shark in the photo was printed without the use of supports, 80% of original size, in…
No supports required. Just slice and print!! 2 Versions available: Shark_v2_B.stl: Friendly face, movable jaw Shark_v2_D.stl: Friendly face, NON-movable jaw Teeth are quite sharp. Best results if you use a thin layer resolution (0.16 mm…
This was remixed from McGybeer's Articulated Shark I split the file for two color printing and made a few changes to the link connecting the pectoral fins to the body (third link). The same four versions are available: Shark V3.0 A Part 1…
This Shark Head is an easy print. It can likely be printed without support; at most a few teeth will require supports. It is a single material print (it has been painted in the cover photo). For similar models see my Collection of Animal…
(Summary consolidated/updated 01/15/23) This is a mini belt sander design intended primarily for sharpening knives though it may also be OK for some light duty grinding/jewelry making/polishing, etc.). It uses commonly available 3/4" x…
Drill Bit Sharpener for Dremel with true Relief Angle. This jig is using a Dremel Cutting Disk for Sharpening. The 2 Parts are held together with a M3 Screw and Nut.
Ready and Painted for Multicolor printers !!! Print in Place no Supports Required It works on Filament & Resin. / Can be scaled up and down Don't add extra supports to the files, they are not needed and it will cause troubles. If you want…
Just slice and print, one-piece print-in-place. Might need to play with it a bit in order to free the joints. Don't print smaller than 50% of the original size, joints won't work properly.
A simple hammerhead shark model that also comes with different hole sizes for magnets. It comes in different versions: Circular holes cut in the bottom side with diameters of 10-18.5mm and a depth of 3mm or 5mm and a clean version with a…
(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Waveshare 7inch HDMI LCD (C) ) Mount options: My desktop mounts (45-degree / 60-degree) with Pi…
Quick and easy Visor Sharpie/Pen universal clip. Great for field workers who need to scribble quick notes occasionally, and can't get caught without a pen! Printed in Prusament PETG.
I really liked CNCKitchen's sharpener design, but I wanted some extra refinements, making the construction a bit simpler, using not so many different types of screws. So here's my remix. Changes from V2.1: redesigned handle for quick…
This adorable shark is designed to print in one go without any supports! It prints best at a lower layer height but I printed it at 0.2mm and it came out just fine. It can be scaled up and down as much as your printing accuracy allows and…
🎨Try KOGI LAB for free at kogilab.com ! Meet the newest little creature joining the KOGI3D collection - the Mini Articulated Shark! I wanted to keep this one small, cute, and fun to play with , with a chunky stylized shark design and a…
This is a wall mount for a Shark hand held vacuum with a charge port. This should fit the following models CH901, CH950, CH951, and CH955. I was surprised to find that this model does not come with the wall mount, same issue with the more…
My first time trying to make an articulated print and I decided to make a zebra shark. They are really cute and I need some more 3D sharks that aren't the classics like great white, hammerhead and whale shark. Model size: 219.4 mm x 88.5…
You shoul use a 4 M3x10 screws to secure a screen to the case.
Because who doesn't want a sharkfin, especially if it means you don't have to kill a shark to get it. Round bottom has a slot that fits a 2.5" web belt and a curve so it should sit flat on an AL80 tank. Flat bottom has no slot and a flat…
Update 20240718: added HD version. Tips: It stands pretty well when printed with 20% or higher infill density! This is the fan art of Sharkboo from Zenless Zone Zero. The item is .stl files for the figure, designed for 3d printing. I…
Overview Flexible shark made from letters. You can use it as a keychain, pendant, bracelet or just play with it. It has holes to attach it anywhere you want. Printing Tested with Bambu Lab X1 and Prusa Mk3: 0.4 mm nozzle, 0.2 mm layer…
A tool for sharpening the tip of a drill bit. The angle of the tip of the bit is 121° degrees. If your angle grinder has
Simple angle guides for knife and tool sharpening. These are not designed to clamp to the knife or hold the angle for you. They are designed to help if you are learning to freehand sharpen. Just rest the knife against the guide, lock the…
Just remixed this to be a key chain Category: Toys & Games
Silent Swimmer or Savage Shark? Original design for the 2023 Christmas Community Print Drive . A couple of support-free sharks for playtime or decoration. Enhance an ocean scene or surprise a friend for Shark Week. Two versions included:…
Насадка на точило с абразивным кругом для заточки свёрл , угол при вершине 130°. Насадка подойдёт для сверла диаметром до 10 мм, угол 130° может быть использован на свёрлах по дереву и мягкому металлу. Насадка крепится к точилу болтом М6…
I see a lot of articulated stuff floating around. I'm new to sculpting in the 3d workspace but I like a challenge and so I thought I would take a stab at my own version of a shark. I gave him more of a cartoon big human teeth smile…
I needed an angle guide for sharpening bigger drill bits on my bench grinder. With this I can move the bit on the grinder table from side to side and tilt it around the table edge. For now I have added only 118 degree tip angle files.…
Bigger joints made to last, and easier to break free when using a larger nozzle. Or it can be made smaller with standard nozzles and still work. The earlier comments may be correct about some of the gaps being too wide, when printing…
The arm of the Work Sharp has a tendency to deflect or sag as you apply pressure when sharpening a knife. This simple but effective support block prevents that from happening.
Inspired by a print Sharkz: https://www.thingiverse.com/thing:910216 But I completely redesigned it from scratch (so I don't really think of it as a remix). I wanted it to be a Chip Clip (Crisp Clip in British). Here is what I added: Be…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I think this is a beautiful scan put out by the Auckland Museum, I just wanted to try and make it more printable and the edges and delicate jaw cartilage strong enough, was fun trying to get it to work with remeshing and other trial and…
HardPrint co. best-selling Tiny Shark Flexy Keychain has been released! The design is super cute, print in one piece, without support and easy to print. In order to make it easy for everyone to print, we modified many model details. In…
To scale model of the shard of Narsil. You will need to print 2x of the crossguard, blade, and pommel as it is cut through the XY plane for easier printing. You then need to glue the two halves together.
No matter what I tried, PrusaSlicer 2.4.2 insisted on unsupported bridges for the roof of the sharks mouth. I added a cylinder support enforcer to the unsupported section, and after printing, simply removed the supports.
I scaled down cyclenut's flexible shark, made it thinner, and moved the eyehole to the corner to turn it into an earring. Now you can celebrate Shark Week all year round! No rafts or supports are necessary. 0.2mm resolution and 10% infill…
All credit for the initial design goes to Printin'Monkey . The initial design was a great start, but it didn't work for me 100% and my setup. My Galaxy s24 in a rokform case was too thick so I expanded the cradle to 18mm to accommodate…
This is a chisel sharpening jig. It accommodates chisels as small as 0.25 inch and as wide as 2.25 inch. There are 2 holding positions which I'll call the lower vise and the upper vise. Place the chisel into the vise so that its flat side…
I added text to it so you can remember the use. PLA, 0.15 mm layer height , 10%infill.
This is the fully revised Version 2.1! Watch how to make and use one: https://youtu.be/IM2il-zT2fA Bill of material: Suitable sharpening stones set(aff): https://s.click.aliexpress.com/e/_onjGrqw OR Individual sharpening stones (aff):…
While there are several wall mounts for Shark stick vacuums, the Rocket Pro doesn't appear to be one of them. This vacuum has a thin hook behind the canister which is clearly meant as a mounting point and so from this I reverse-engineered…
I know I said I wanted to make models of less known species but one of my best friends said they would love to see a hammerhead shark, so here you go. The last joint is a bit rigid, but it's actually not that bad since the segments before…
Sometimes sharpies write a little too sharp. This airbrush mod fixes that by makes sharpies able to draw nice noisy airbrushed lines. Simply attach a straw that you can get with a drink at any fast food place and blow through it. The…
I liked this model a lot, but the first print I noticed the scraper edge wasn't as clean and sharp as id like. I found it to be the bottom edge of the model was slightly beveled and as such, the first layer of the scraper was printing…
I think the Sharrow MX-1 is pretty cool looking and if it lives up to the hype perhaps a new standard in marine propellers. Print Settings Printer Brand: Creality Rafts: No Supports: Doesn't Matter Category: Hobby
The Sharp Branches Vase is a captivating fusion of nature-inspired design and modern aesthetics. Its deep matte black finish showcases intricate, sharp branch-like patterns carved into its surface, creating a bold and sophisticated…
This guide is used to get the right chisel and plane projection lengths when using an eclipse style sharpening system. Its pretty similar to the original that it's remixed from except I added a lip to use it on the edge of the bench and I…
