Counting matching models…
I didn't have room on mine to mount it up and down so I designed this sideways mount. It does not need any supports if printed in the orientation I have pictured.
An ethernet RJ45 repair clip with a snap lock that locks the plug in the socket. This model is optimized for sideways print so that the snap lock prints with the layer lines to increase the strength. Use: 3 perimeters (walls) supports To…
I needed to store my angle grinders better and all the models for mounts I could find fit them flat against the wall, which takes up a lot of space that I didn't have, so I made some that fit sideways with the handle pointed out. There…
A modular rack for pegboards with sideways orientation to save space. You can add the individual holder parts based on your needs: one big hole to hang a pair of pliers in, many small holes for allen keys, a small slot for calipers, ……
Overview This headphone hook holds your cans perpendicular to your desk, and beneath the surface to reduce the overall footprint. The clamp is fixed with a large printed thumbscrew to ensure there is a sturdy connection to your surface.…
Designed this bracket to use in my Jonsbo D32 mATX PC case, but works with other cases as (see list below). The CPU cables provided with my Corsair SF850 power supply were relatively short and struggled to reach between the motherboard…
This is a new variation of my equipment box that I made back in March of 2020 for the Anycubic Mega I3 Mega. You can check out my older design here: https://www.printables.com/prints/33156-anycubic-i3-mega-clip-on-box This one is a bit…
This version is modified to be built on its side, with supports. A small amount of material was removed to ensure it lies flat. Placing it in this orientation makes it stronger due to where the layer lines form. It will not print without…
Just a simple divider for sideways game card boxes. I specifically used these boxes and they work great. I have two versions, 69x94 is the same size as these official BCW dividers and 69x100 is what I used in the pictures as it forces the…
You're using a Makita or other Battery Adapter for your Dyson Vacuum and you wonder how to mount it to the wall now? Here's the solution, the sideway wall mount for Dyson Vacuums. Should fit most of the different Dyson models. With a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a bracket to mount a MeanWell LRS-350 power supply on it's side vertically. I designed this mount to be simple and conscious of the vent holes. The two brackets for one power supply are identical. it has countersunk holes for…
This model is compatible with the lego system.
This is version 2: Original model here . I really liked scrat82's “ j1772 plug holder with cord management for EV cars and chevy Volt ”. Specifically I liked the way the handle was sideways, rather than perpendicular to the wall. I was…
This model is compatible with the lego system.
Please read the in station guide for the X-stop housing on the original model. It's essentially the same. I have added 4 holes for threaded inserts in the original X-stop housing to be used as mount points. I wasn't able to find any cable…
Same as original, but the grove now has slanted sides. This makes printing sideways (U-shape on print bed) possible. This way the layers are along the U-shape and any occurring forces are evenly spread out in the x-y direction, which is…
A wall mount to hold a Dyson DC44 (or similar) equipped with a battery adaptor.
This is a bracket with 4U server cases like the Rosewill 4U Server (RSV-R4000U) which come with the front panel I/O mounted horizontally preventing insertion of a 3rd Rosewill RSV 4 x 3.5-Inch HDD Cage RASA-11001 . By mounting it…
Two models are provided, the one shown in the picture with holes for less material usage where it matters the least but has steepish overhangs, and a solid version
i came here looking for exactly this and didnt find it, so as per usual here it is. For either myself in the past, or anyone who already as a bunch of 8" long sideways boxes like i do. if you want it for bigger sleeves a scale up by a few…
I redesigned this part to fit the HDMI5 V1.1 from BTT. The housing is screwed onto the printer first, then the screen is screwed into the mounting. You need: 6x M3x8mm screws two M3 nuts that slide into your aluminium profile feel free to…
As long as I love my AirPods Pro, I've never been happy with existing protective cases. They may protect from scratches. But when the case is dropped with the AirPods still inside, the case opens as it hits the ground, and the AirPods…
A mount bracket for a standard FRC radio
This is the fan duct for the EVA3 print head. This duct has the dual 5015 fans laying flat to stay closer to the gantry instead of side by side. This gives more clearance in the back.
A DC tile with keys removed so it can only be placed laterally.
Maybe you want to mount your SSR to din rail sideway? Well, look no further cos i have the mount for you! Uses 2x M3 4.6x4mm heatset inserts. Thanks to the Voron guys for the Din mount thing.
I need to mount my case sideways due to cables.. so changed the layout a bit
See details here: Fixing the issue of the filament tube guide I encountered here: https://youtu.be/ACI2cUQDgfg?t=455 Printed in PETG
I really liked scrat82's “ j1772 plug holder with cord management for EV cars and chevy Volt ”. Specifically I liked the way the handle was sideways, rather than perpendicular to the wall. I was unable to find a version for the Tesla…
I needed my IKEA FÖRNUFTIG (or FORNUFTIG, as it might need to be spelled to be found by those of you without the accents on your keyboard :-) )to stand on its side to fit where it was going to be placed, and hanging it on the wall was not…
This Filament roller should work for any spool with an inner diameter between 50-64mm No bearings needed just print the two parts, stack them and put a Filament spool on top.
lightweight holder for soda stream cannisters. There are little nubs that let them stack. Not sure how many I would stack, but three seems to work quite well
GoPro Compatible Box for the ESP32Cam. It Clips together due to the design of the bottom Part. Its just a minor adjustment to this Model by phantase : https://www.thingiverse.com/thing:4363115 Print Settings Rafts: No Supports: No…
Remix of the customizable license plate frame by @ChildsPlay3DP_205392
I needed an improved version of my previous clamp to avoid catching and tearing the shading net of my bonsai greenhouse with the tightening screw. To do so I rotated 90° sideways the tightening screw. Now I can hang my…
THIS IS A WORK IN PROGRESS MODEL There is one Model that holds your phone upright and one sideways.
Simple bracket to hold Silvercrest powerstip from LIDL. It is parametric, and it is oriented sideways as I needed to mount it under a shelf but still having the outlets facing towards me.
Hello there, this is a gridfinity compatible bin capable of holding one bottle of kraftprotz glue. It uses 1x3x6 units in the standard gridfinity system but sadly nothing can be stacked on half of it. Its my first somewhat self designed…
Sideways honeycomb storage wall secure holder for iFixit's Mako driver kit, engraved. My exact settings are embedded in the 3mf file, I used OrcaSlicer. The low filament version is also included, without presets.
These outlet strips clip directly into the Brennenstuhl power strips and turn them sideways so if you mount them to the bottom of your desk, heavy plugs don't fall out. For the regular one, you will need some metal clips (as pictured)
Store cylinders (cans, etc.) on their sides and be able to pull them out easily with them rolling around. These shelves fit the cylinder and stack so you can build up multiple levels. Put a label on the end of the cylinder if you want to…
The Sky Moves Sideways - 1995 "We lost the skyline. We stepped right off the map. Drifted into blank space, and let the clocks relapse." I love Steven Wilson and Porcupine Tree's music, so I created a set of 3D printable abstractions to…
Enhance your Profitec Pro 300 with this custom water tank cover, modelled to efficiently vent steam and humidity to the back of your machine while keeping dust out. It also creates additional storage space on top of the unit for a…
Hello, I can design models for 3D printing or CNC Machining. DM me on what's app (+90 551 985 16 90) for custom quote. I have a product development business in Istanbul/Turkey. This model is free to use and works wonders if you follow the…
Great thanks to FourMix for the mod kit which I largely used, especially for the electronics. Some edits made to accommodate extra touch sensor wiring and different cable routing. I also did have to redesign the PSU bracket attachment…
This bracket allows the Qidi Box hub for the Max 4 (likely the Q2 and Plus 5 also, maybe Plus 4 idk) to be mounted sideways. I have two QidiBoxes and with 8 PTFE tubes, the hub was becoming a mess. It looked like it would be easier for…
Sideways Mounts for Funko Pop wall mount by Polan for mounting your pops sideways on the funko pop wall by polan. also fits funko pops sideways with cases (not tested with the hard cases only foldables) Rails and other Mounts can be found…
Designed to fit the BentoBox v2.0 by ThrutheFrame , posted with the designer’s permission. You’ll need the main project for everything else. Why: standing the BentoBox in an IKEA LACK enclosure, the standard duct blew warm air across the…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a wall mounted hook that will hang things horizontally from the wall, great if you have a flat object. Adhesives are required to stick this to a wall.
Holds your bottles - Prevents them from rolling off the table! Print time: ~7 minutes Supports - Not needed Raft/Brim - Not needed Print-in-place - Yes Material - PLA or PLA+ Easy Filament Swap - Not applicable Print difficulty rating:…
This model is compatible with the lego system.
The Sky Moves Sideways - 1995 "We lost the skyline. We stepped right off the map. Drifted into blank space, and let the clocks relapse." I love Steven Wilson and Porcupine Tree's music, so I created a set of 3D printable abstractions to…
Underdesk headphone holder originally made by Twogz. His design was far too large for my desk so I adjusted the hook.
my first attempt to fix the size issue with the clamp for the headphone holder. This is about the max length you can use for the neck length to the holder. It still failed for me though. I'll be shortening this for my shorter hook version…
This spool mounted holder was made up for my Bambu P1P to mount the filament on the wall next to the printer.
This model is compatible with the lego system.
A friend needed a funnel that has a curve to lead what's poured into it to the side. So I constructed it. A funnel, that is rectangular with a flat surface and a sideways curved outlet. Oddly specific and purpose-made. May it help you…
I made a power supply mount for a voron 2.4 psu, if you need more space use this. I only made the first model. print 2 clips, one mount and one stabilizer. this is the stabilizer VVV…
I prefer to print with supports on the digital side mount, but likely not required depending on speed. See sliced image. Refer to the original model if you prefer the easier slip-in hex mount or are connecting it to an existing…
This phone holder is designed to sit on the edge of a table or desk. You can also get more angle on it if you push it off the lip. The files are included to make it the length you need for your phone and the depth with a case or without.
This model is compatible with the lego system.
This is a wall mount charger plug holder but it mounts sideways Category: Automotive
A can holder, made sideways for the fun of it, fits small cans, so you only sip a lil at a time! Made on tinkercad by me! took an hour and a half roughly with tree supports. You can fit bottles too!
Just open and close it a couple of times, and it should work like a charm
This is a wall mounted hook that will hang things horizontally from the wall, great if you have a flat object. Adhesives are required to stick this to a wall.
Holds your bottles - Prevents them from rolling off the table! Print time: ~7 minutes Supports - Not needed Raft/Brim - Not needed Print-in-place - Yes Material - PLA or PLA+ Easy Filament Swap - Not applicable Print difficulty rating:…
This model is compatible with the lego system.
A remix on a cool badge holder design, made solid so it can be customized with a logo. This should hold two badges. Feel free to remix!
Just got our Age of the Primes Sideways and while he is quite the fun bot, his missiles are a little on the short side. So here's our take on re-creating a close to original missile set for him! These were 3d printed in clear and then…
Save space on your Skadis Board with these pliers holders . They fit securely onto the pegboard, reduce unnecessary movement, and keep your tools at an angled position for easy access and quick placement. Available in three sizes to fit…
This project started when I got into printing flexible materials. Apart from reworking my extruder with this excellent design by Petehagoras , it also required a low friction, straight path feed of the filament into the extruder head. It…
Remix to mount from the side. Hole distance is exactly for IKEA Platsa on the backside. But don't ask me for screws, I had some screws left which fit somehow. Lay it down to the side (yeah I know it would be better if it's already on the…
By mounting the H3 extruder sideways (gear facing outwards parallel with backplate) , the form factor is more compact and still fully functional! Insert two M3 nylock nuts and use M3*25mm screws to secure. Can be fastened to the Ultimaker…
Simple E3D Revo nozzle holder for z axis top mount. Can be installed in two positions prints under 1 hour holds up to 5 nozzles Happy printing! NK
I printed the original hook without considering my desk setup and found that it would not fit my desk. I have a drawer in the way of the hook's opening on the left side of my desk where I needed to place the hook. I also have a much…
This is a small piece to allow you to mount the filament spool holder sideways. There are many adapters out there already, but I couldn't find one that easily fit past the Z rods (if you have dual Z rods) and didn't require unscrewing the…
Wanted a flag-holder that is not obvious on the outside of our balcony - so made my own design. One side provided - just mirror in you slicer if you want a mirrored version. Build so no support needed (I used PETG) - but could be that…
singular Wii game holder sideways. print as many as needed then glue them on top of each other
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
This hook is sized perfectly to slot into a Stanley wooden-scale utility knife and hang it from a HSW panel, but can also be used to hang anything else that fits the dimensions.
My line trimmer has to be mounted with the handle perpendicular to the wall. This hook solves that problem.
Bottom chamfers are at a 30 degree angle and the holes have teardrop cuts. Should require 0 supports to get a great print. My clip was strong enough to bend it back completely instead of snapping off.
I wanted a phone holder that would be stable on my bed, so i designed this. its got 10.5 mm on the bottom and the back goes up 65 mm. its 100 mm wide, i freehanded the curves in Cad and filleted all the sharp angles.
Dies ist eine einfache Führung, um das Filament bei einem Anycubic Kobra 2 Drucker an der Kante des Druckers vorbei zu leiten, wenn man die Spule oben montiert. Ich habe einen Spool-Holder gedruckt und montiert, um das Filament oberhalb…
I noticed that with a single fan, the air is concentrated in the 4 vents that all blow to the right side of the nozzle. I changed the path so that the other two vents, which cool the nozzle from the front and back, get more air.
I took the USB Cable Storage Organizer for Gridfinity and turned it sideways
This model is compatible with the lego system.
This model is compatible with the lego system.
