Counting matching models…
Update on 2/10/2023: I added a different “Rastered” set that has only one registration ledge to accommodate people who may have situations where they cannot use the bottom ledge in the original design. These 3 new designs are the same…
Siding flush mount for the Ubiquiti Unifi G4 Doorbell Pro. V1 is the original model that works/worked with the G4 Doorbell Pro when it was first released. V2 is for the later changes to mounting pattern / holes that works with the newer…
I came home last night to find a few sections of my vinyl siding had separated from their neighboring runs of siding. I hopped up an a ladder and quickly realized that I would need some type of tool to pull open the plastic lip on one…
Turns your Metabo coil roofing nailer into a siding nailer.
Due to the included adapter being only flat I've created a siding adaptor made for standard 4" vinyl siding. It keeps the sideway angle of that included spacer. There are two models included depending if you want to install the doorbell…
This is a Cable clip designed to hold the Starlink Dishy Mcflatface cable to vinyl siding, no tools or drilling required. These simply slide up and snap into place just like the vinyl pieces attach to each other. They could of course be…
I made this to be able to mount some lighting and a camera on the front of my house. I have vinyl siding and needed a 'filler' to make it look flush. I designed this but have not found the time to print it and test it out. I still wanted…
Compatible with almost HO scale truck. Use a .2 mm nozzle
UPDATE 2023-12-06: There was a slight measurement error in the base notch spacing of many of the originally uploaded models. I replaced them all with corrected files. If you downloaded and printed the old designs, they will still work,…
Blink camera mount for Dutch lap siding (Menards)
This mounting bracket is designed to be a form fit for both the aluminum siding as well as the black metal back plate of the G4 doorbell. It is a right-hand mount, but is designed to be mirrorable in PrusaSlicer to get a left-hand mount.…
This model is a Reolink RLC-811A Camera Mount for 5" Dutchlap Vinyl Siding. It will print with no supports. I needed a sturdy mount for outdoor use so I printed with 4 perimeters and 4 top and bottom layers out of ASA. Mounting hardware:…
Mount for a Blink security camera for vinyl siding. Modeled after the clips I use for Christmas lights so I don't have to nail or screw things into the house. They are removable so you can change the location of cameras easily. I ordered…
This model forms a solid base that will allow you to mount lights on a specific pattern of corrugated metal siding. See the pictures in order to understand how this is used to hold the light and the pattern of metal siding that it will…
Customizable mounting plate for vinyl siding. Refer to DimKey image. First two values PeakToPeak and Section depth refer to siding. Remaining values are used to create the plate. The cutout can either be round or rectangular and is…
No more damaged Extension cords! No more "good Neighbours" damaging your expensive extension cords with snow blowers! Prolong the line of your cords from damage of the elements! Just pop under a seam on your siding and friction does the…
Parametric model for mounting the Unifi G4 Doorbell Pro POE at odd angles, on either the left or right side of the door. Intended to be used with the metal backplate that comes included with the doorbell. The POE version comes with angled…
i haven't found a 4.5 inch dutch lap siding yet and spent awhile designing this one actually kind of very proud of it just find where u need a hole for attachment purposes aka light ,dryer vent, camera and cut out as necessary i printed…
I need an angled spacer so that this would fit on my house's siding.
Version 1 (red print in photos) I created based on a similar design I found, but I made mine based on the type of siding I have, dutch lap. I printed it with a 4mm nozzle and 20% infill out of PLA. The plate is 3/8" thick. The triangle…
This is an easy to print mounting kit for a Ring Doorbell. Works with Ring Doorbell models 1 and 2. I designed the mount myself to custom fit my siding on my mobile home. The angled mounts and rain cover are altered versions (original…
This inserts in between vinyl siding connections to mount your Wyze Pan Cam v3. Assumes you still have the original right angle mount. Let me know if you attach it to a print, I'd love to know about it! If you would like a 90deg rotation,…
These are two angled spacers to be used to mount a basic 2021 wired Ring doorbell to cedar or vinyl siding. One of the spacers will have the doorbell facing straight out from the face of the siding and the other is angled 15 degrees to…
My home needed a more robust method of mounting my front door light fixtures to it's vinyl siding. Previous owners would change lights and drill new holes to the point where things were pretty bad and I could no longer get a snug…
clips to hang holiday lights on vinyl siding. Print Settings Printer Brand: Creality Printer: K1 Rafts: No Supports: No Resolution: .2 Infill: 100 Filament: Inland Tough PLA White Category: Outdoor & Garden
Update: Added a wall plate with NO channel for wires. My house I and the doorbell wired come out below where I wanted. The updated one just has the hole in the middle of the plate. Update: Added a V2 for the plug. I thickened up the…
I finally got around to putting new vinyl siding on my garage and could not bring myself to make holes in it with screws so I whipped these up so i could re-hang my garage decorations. They have a surprisingly good grip & are super-simple…
Reolink Doorbell 4.5" Dutch Lap Siding Mounts These mounts fit on 4 ½" Dutch Lap vinyl siding and provide a mounting surface for Reolink's video doorbells. Two versions: POE/Wifi and Battery. You can mount the angle mounting bracket onto…
Was having a hard time hanging outdoor lighting from the vinyl siding so I made a hook to help me and everyone else out. This hook just pushes in to the siding trim and has notches to holds it in place. Print Settings Printer: CR-10 S4…
Simple clip to mount Christmas lights on siding
I was looking for a commercial made vinyl siding bracket to mount an Arlo wired video doorbell but could not find one. So I made one. I’m including a step file for anyone that wants to mod this, should make it easier. I used 4 perimeters…
Slides in between the horizontal vinyl siding connections via friction fit. Easy to move. Easy to remove. I printed at 1.0 layer height to give the posts the best chance of not breaking. I added a Support Enforcer just over the posts I…
Updated (April 2026): I have updated the file as I cleaned it up and made some slight modifications (thichness, wire opening). V1 and V2 are the same width and heigh but the back is slightly different to try to stay flush to my siding.…
Allows the Ubiquiti U7 Outdoor (U7-Outdoor) and U7 Pro Outdoor (U7-Pro-Outdoor) to be mounted on corrugated metal siding, specifically with a 2-2/3" spread and a 7/8" rise (see photo). This mount is compatible with both the Ubiquiti U7…
print on bottom with no supports. no enclosure needed.
4" Siding Mount for 2 Ubiquiti G4 Bullet or G5 Pro Cameras and others that use the same mount. Big thanks to user PHOENlX for providing mount on Thingiverse. https://www.thingiverse.com/thing:4930947 Print Settings Printer Brand: Prusa…
I'm running some Cat6 outside for a camera, but I have fiber-cement siding (commonly known as HardiPlank) and couldn't staple the network wire. I noticed the siding planks had small gaps where they overlap, and upon further inspection,…
This adapter works with the TP-Link Kasa KD110 doorbell on standard 4" double siding.
I created a Ring 4 camera mount for my Ring doorbell after mounting it haphazardly to my siding. This ended up warping it slightly and just not allowing for a nice clean install. We also had issues with debris and whatever else ending up…
3 degree and 6 degree spacers for Reolink doorbell camera, corrects the level of camera when mounted on older clapboard siding. Blender file included. Category: Household
Wedge for the Arlo Doorbell to accommodate siding. Fits under that stock Arlo mount perfectly and has passthrough that matches stock for wiring and screws. The angle of the wedge is 5 degrees which is .5 degrees off level which was…
The original model wasn't the right size or had the holes for the brass inserts I needed so I remade the same idea from scratch. You will need some 6mm deep M4 inserts. These will work with the provided M4 screws that come with the…
This is a an adapter to allow a REOLINK 2K Battery Video Doorbell to mount to siding. In my case it's staggered Hardy Board, but it will work for any siding with a 12mm thickness and a ~7 degree angle…
This is a bracket to mount an outdoor thermometer or other small item without drilling holes. The bracket slides onto vinyl J channel and has a hole for a #5 or #6 screw. Versions for both screw sizes are included as well as the native…
The Ubiquiti Smart Floodlight comes with two backplates, one that holds the light parallel to the wall and the other that tips the light down at an angle. It is the latter angled bracket that is most useful (in my opinion) since you can…
This is just a bracket that I designed that hooks onto my shelves to create shelves for the filament that I have on hand. These brackets require 3/8" dowels. The length of the dowels depend on the size of the thickness of your shelves.…
Spacer to fit Reolink POE Doorbell to Siding I installed a Reolink POE doorbell, but my doorbell was located on vinyl siding such that the doorbell can't fit flush to the mounting surface. Functionally, that works fine, but it looks ugly.…
If you happen to have outdoor vinyl siding with inside corner trim like mine, this thing will easily clip your Wyze Cam to it. Just slide the camera base into it and then clip it onto the trim. I was able to tuck the cable under the rest…
Please print in PETG for thermal robustness. This was necessary for my home because the angle would not constitute good draining. You may need longer screws than are included with the install kit.
Ring doorbell mount for old 2" wood siding. Print on flat face, no supports required. Not intended to replace the stock ring mount but rather add support for the original mount for 2" wood siding on older houses. Can be mounted with #8…
I learned a few things on this design. The biggest lesson what that despite how it looks, siding is not make a flat bends. From one “slat” to the next, there is a slight curve. That drove me nuts. The other is sometimes, you're just going…
For my lean-to greenhouse from Vente Unique, I created multiple adapters and add-ons for fitting a rain pipe. Printing notes: I printed the clips (white) in PLA and the rain pipe bits in grey PETG. PETG is more UV resistant and should…
A track for Ethernet cable to run in that should clip under hardiplank siding. Will print soon. Edit: Tried printing the original version and the slight overhang of the ‘tab’ parts caused issues… and it was a bit skinny which made it hard…
This is a remix of Escarjoe's model. The cut under the siding overhang was extended, and the overall shape trimmed to an oval to better fit the aluminum mount that comes with the doorbell.
This is a J Block for an outdoor hose bib. It's the flat surface type, not the recessed variety commonly sold in hardware stores. I use a piece of 6 inch cellulose PVC as a backer (It's 140mm wide, cut to 150mm long). This looks far…
Makita AN611 Siding Nailer Valve Sheet, print in TPU like material. 0.1mm layer height, all perimeters and i bet this will last longer than the cheap rubber ones as it was designed to be a little thicker in some parts. Category: Tools
Mount for 5" shingle siding to use with Ring Wired camera.
Blink Doorbell 2K+ 5" Dutch Lap Vinyl Siding Adapter This is a modified version of the Blink Doorbell 5-inch Dutch Lap Vinyl Siding Adapter (Normal Flush Mount) originally designed by Jamminator on Thingiverse . The original design was…
I created this because I bought a Google Nest Doorbell battery with no mounting hardware for cheap on eBay and a 3rd party mounting hardware that still needed the original mounting hardware to work. It was too long and skinny for the…
I used the GayPN's design as a guide to create a new model that fits my 3.15" vinyl siding corner. Like GayPN's design this is cut in half (you will need two of these) and uses M4 heat inserts for both the camera mount and to hold the…
A mount for the Nest Hello doorbell. This is specific to the siding we have. Georgia Pacific Shadow Ridge 5" How I Designed This Fusion 360 - here is the link to the files for your improvement. https://a360.co/2TfSwco I cut a thin strip…
I needed a hook for light hanging that fit the short edge of our siding. The model fits 8mm or 5/16" hardiplank. Scale it if you have something a little different (thicker or thinner). These have only been out for a few weeks, but are…
A way to allow the siding to be installed.
Soft no-mar nose caps for the Metabo NV65 series Coil Siding Nailer. Print in TPU for no-mar The RoundShoe_1-25 puts the nail 5/8" from the edge The RoundShoe_1-50 puts the nail 3/4/" from the edge The square shoe has a 5/8" or 1" or 1…
I originally was trying to make anti vibration feet due to low Hz rumble I could hear with my U-Shaped AC. I ended up making feet that are a lot more gentle to my plastic siding. Unfortunately they do not help with the rumble. I fixed…
To mount, follow the instructions that came with your doorbell while adding this bracket under the one that came with your doorbell Only works with 4" Dutch lap vinyl siding Print in PETG or ASA Printed on a Bambu Lab A1 with black PETG
These camera mounts were made to work with a 4" Clapboard Siding. They require no fasteners. I have mounted mine in areas I feel are very protected from high winds. They slide into the already existing seam between two pieces of siding.…
Designed an OEM Replacement Cover for a Low Profile Weatherproof InBox For Retrofit Siding Construction. I printed mine out of PCTG and cover is in durability testing in an extremely sunny location. Testing began 7/28/2026. It can be…
For directly mounting the UniFi G6 Entry to 4" vinyl siding. I have models for 4.5, 5, and 5.5" as well. Message me. Printed in PETG.
I used the GayPN's design as a guide to create a new model that fits my 3.15" vinyl siding corner. Like GayPN's design this is cut in half (you will need two of these) and uses M4 heat inserts for both the camera mount and to hold the…
This model provides a bracket for mounting a Ring Gen 2 Wired doorbell on siding with the common 1/2" step every 4" of height. The model fits between the siding and the bracket the comes with the doorbell, allowing the doorbell to remain…
This is a an adapter to allow a REOLINK 2K Battery Video Doorbell to mount to siding. In my case it's staggered Hardy Board, but it will work for any siding with a 12mm thickness and a ~7 degree angle…
Spacer to fit Reolink POE Doorbell to Siding I installed a Reolink POE doorbell, but my doorbell was located on vinyl siding such that the doorbell can't fit flush to the mounting surface. Functionally, that works fine, but it looks ugly.…
UPDATE 2023-12-06: There was a slight measurement error in the base notch spacing of many of the originally uploaded models. I replaced them all with corrected files. If you downloaded and printed the old designs, they will still work,…
Updated (April 2026): I have updated the file as I cleaned it up and made some slight modifications (thichness, wire opening). V1 and V2 are the same width and heigh but the back is slightly different to try to stay flush to my siding.…
My old doorbell was mounted on my siding. The new WYZE video doorbell would have been mounted angled down without an adapter. So I whipped one up. This one has two sets of holes. One for the new doorbell plate and one to mount the adapter…
There is a “wedge” version which has a 5% downward angle of the mount so that you can see packages closer to the wall. The non-wedge version does not include the 5% downward angle. You can download the model or edit the model directly in…
Print out of PETG. The ring fits over the stock mount to hide the gap. Should fit over it fairly tight. Adjust accordingly.
This is 3D printable and interlock-able siding. I printed this in PETG you can print with ABS or other outdoor materials that you prefer. I will upload a picture of the fully sided shed when it is finished in the spring.
This clip easily snaps into PVC siding joint allowing you to route cables horizontally when there is no other way to hide them.
Remix for the Wyze Cam v3 - Indoor & Outdoor camera. Siding mount to slip between your siding panels for a non-destructive mounting option. I really like this mount as it is easy to move around and does absolutely zero damage to anything.…
Prints with supports. I printed in petg and so far it has been holding up well. I did not need to screw into the siding or use adhesive though that would be more secure. I used 3mm screws and tapped the holes, but there are recesses for…
The camera metal support came with the screws which I used. You will need your own screws to install the composite support to the siding. I used ABS with 5 walls and 15% infill. I hope it helps you out.
I designed this to mount the doorbell to the front of my house which has 4.5" vinyl siding. I didn't need any extra screws; just used the hardware that came with the kit! Printed on an MK4S in PETG: Printed on its side with organic…
Needed a vinyl siding adapter to be able to attach the google nest 2nd gen battery doorbell to the side of the house. The only one i found on here was for the wired version only. This adapter is for the battery version (Which can also be…
I designed this for a very specific problem with doorbell wiring. We have angled siding, where our doorbell is located, and the egress point for the doorbell wiring is directly underneath one of the edges of the siding. This model is…
While renting a place with no doorbell wiring this worked well by using a tight fit with the vinyl and vinyl flashing.
I create mostly utilitarian functional models. Generally addressing the need is the primary concern and looks come secondary, if considered at all. Please leave a comment if you print this and find it useful! I needed to run a garden hose…
I made this to hold a strand of lights tight to the underside of the windows on my house. The store bought vinyl clips are expensive and go under the large main panels. I couldn't find anything for the really short trim around my windows.…
Small hook that slides between Vinyl Siding to allow for hanging lightweight objects. PLA 0.20 Layer height 2 perimeters 15% Gyroid infill
For directly mounting the UniFi G6 Entry to 4" vinyl siding. I have models for 4.5, 5, and 5.5" as well. Message me. Printed in PETG.
This is dimensionally accurate for the Doorbell Lite outline, screw holes, and ethernet pass through. Adjust parametric model to fit your siding. The model and step file shown here are for the common siding size 4" x 1/2". So if you have…
Printed with PETG for outdoor use, with 0.12 layers and no supports. Could still use some improvements, slots are a bit long but it worked for what I needed.
This model provides a bracket for mounting a Ring Gen 2 Wired doorbell on siding with the common 1/2" step every 4" of height. The model fits between the siding and the bracket the comes with the doorbell, allowing the doorbell to remain…
I made this Eufy C330 2K Dual Camera shim for the Hardy Plank siding on my house. I have included the STEP file for CAD and the STL for printing. I have it set for a 1 degree angle on the wall.
Tired of your Ring doorbell sitting crooked on vinyl siding? This mount is designed specifically for 4" vinyl siding to give your Ring Doorbell Pro a clean, flush, professional install —no awkward gaps, wedges, or shims. 🔧 What it solves…
A simple wedge adapter to install your Ring Video doorbell at a proper angle on lap siding. Now with 3 and 5 degree versions. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: .1 Infill: 100 Filament:…
Adapter for the original Ring Video Doorbell and 2020 rerelease to allow it to mount nicely against 4" siding. I couldn't find anything that fit my needs, so I made these. They should print with no supports if you print it with the bottom…
