Counting matching models…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Check updates at the bottom The print files only contain my modified parts, so you'll need to print these plus parts that the original battle axe has, the original…
While we don't sell a full hardware kit, you can get other nerfy hardware available here: Frontline Foam Overview video here: Remix made and published with permission from SillyButts (original fileset from…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice 20250607 Update: MuzzleA (1) wrong file, correct version updated This will need two sets of SLAB hardware (12 in barrel) and will need the following additional…
Talon magazine block for nerf blasters that allows easier single loading of a dart in blasters with mag wells that have a right side cutout. I remixed this so I could single load my slab easier and faster. You could probably mirror this…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Updates: 20260813 Model fix Thanks to user Twubble_4362118 for reporting this Interference found at the base of the pump grip Model files updated with PrimingGrip_V4…
No hardware required Fusion 360 and STEP file are provided if modifications are needed ISSUES: The cheek rests do are not aligned properly leaving a channel between them, but the 3d model does not have the channel, so I don't know what…
Want your Alchemist to be that much better ? Look no further! Linear rails offer buttery smooth motion while restricting all forms of wiggle and rotation. As an added bonus, this means that nothing ever touches your barrel, so your…
Thanks if you want to buy me a coffee :) https://buymeacoffee.com/methanejuice This is a battle axe made upside down, and takes on the look of the TF2 Widowmaker that uses sillyshells Thanks to all the beta testers' feedback :) Hardware:…
This is a barrel collet for the zius bk1s/2s that uses the sillybutts collet design.
Here is my custom Sillybutts Cynthia with 45cm barrel. It uses the following: Fudd Front end https://www.thingiverse.com/thing:6035519 Swoopy Magwell, PT cover, and Grip.…
features an open and closed version, in case you're concerned for darts hitting the shroud from the inside
I really like Mighty Shrub's pivoting shell catcher on my Firefly so I remixed it for the Battle Axe by SillyButts. Fits very nicely alongside my Battle Axe top rail shell holder:…
Designed for a Sillybutts' Excalibur built using Out of Darts hardware kit (12" barrel, K31 spring). Each sight uses a single M3x25 socket head cap screw, to be driven directly into plastic (no tap or heat-set insert required, but be…
By request. A one piece slide for the Foxbat that has been lengthened a bit to be flush with the duck tail. I also spaced out the front and rear sights for a longer sight picture. The slide is 302mm long so you will need to have a printer…
I like the springy arms of the PBR holder by TheSockCollector (especially in PETG) and wanted to use it on the picatinny top rail of my SillyButts Battle Axe like the one Ready made for the Wildstyle… So I mashed them together really hard…
This is the Chimera Plunger Head for the latest Sillybutts blaster designs. It is compatible with the Alchemist , the Wildstyle , the Foxbat and the Battle Axe . It uses the same hardware as the plunger head of the above mentioned designs…
This is a trimmed model for adding the Sillybutts collet to any suitable design. On a recent revisit of the files I remixed this from I found Silly had included a version of this as well. I'm unsure if I missed it or if it was a later…
Extended front handguard with rails that interfaces with the Swoopy furniture top back rail and railed muzzle. Hopefully the holes line up. The holes should be aligned, but if not use a 3/32 drill bit to make new ones. it shouldn't affect…
My lifter had a bit of an issue that when i racked the pump back too fast that it would fall down too fast and bounce a lot. the bouncing lifter would then quite often be in the way of the shell that gets released from the tube and result…
I modded the original Cynthia to utilize heatset inserts as well as a few tweaks here and there.
Adds an iron sight to the SMILEY picatinny rails using Sillybutts style/geometry sights. You can use a piece of filament and melt the ends to put the ‘dots’ in the holes. Rails still have enough space to put extra things on, but would…
Silly Shells won't feed properly in magazines if the dart heads stick out past the rim of the shell. Cutting an MXL down to 63mm cuts the foam into two even halves. The 63mm dart sits about a quarter inch below the shell's rim and the…
This design is very human. Bring a long screwdriver.
my o-ring had a bad seal so I slightly increased the o-ring stretch
This is a drop-in replacement barrel end-cap of the Dart Zone Pro Mk 4 blaster extended barrel. Open three screws, pull out the old cap mount and barrel, drop in the new cap, and close it up. Now you can use any length barrel you like ( I…
I didn't care much for how the original trigger looked, and I also felt that this would be more comfortable. I printed it with the same settings that Sillybutts used, but I did raise the infill to 25% which probably doesn't make much of a…
A new version for the “Lifter Roller” with ball bearings. I had the problem that the screw thread had eaten into the lifter roller (see pic), causing a lot of friction and making it very difficult, or even (if I pushed slowly) impossible…
Stand for Sillybutts Alchemist pump action blaster. Fits in Talon magazine loader.
A triangle grip spacer that fills the triangle hole in the old caliburn grips. Uses 2 4-40 3/8 screws for assembly. I believe the "hook side" goes towards the spring hook. This part was created by Sillybutts as a request from me. I cant…
This is a custom handguard I designed for Sillybutts' excellent Alchemist nerf blaster. The front and rear barrel shroud sections are functionally identical to the original, but with different cosmetic cutouts. The muzzle section is…
I modded Silly's Alchemist files, to be able to have side picatinny rails on the Alchemist. Minor changes were made following the original design and hardware pattern.
Thanks if you want to buy me a coffee :) https://buymeacoffee.com/methanejuice You need the original Foxbat kit , plus the following: https://docs.google.com/spreadsheets/d/1KOiNNJb-DsYRX4Xing8HacSmP-WwXPeXNfO9-ASy6mA/edit?usp=sharing…
Model 1: Priming lip Added a lip to the rear slide Model 2: Iron sight Relocated the rear iron sight to the back of the slide All models have symmetrical ribbings to match the front slide.
Always wanted a Rival Lug for your Battle Axe? No? Well that's ok. Here it is anyway. If your Battle Axe was waaaay too short for you, add a few inches to it for some intimidation factor. I even included an EVEN LONGER muzzle. I also…
This grip attaches to the front slide of the Foxbat nerf blaster and slides on the bottom picrail, aided by a few rollers for smooth operation. I have remixed the default front slide to include mounting holes for 4-40 plastic screws.…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice This is a project with Dr Flux, and featured in his video :) Beware: The mod reduces the capacity to 3+1. That and this blaster is almost a meter long and ~6 kg…
-Intended for use with Lone Wolf 052's Brilliant Shikoku - Strike Handguard as an extra reinforcement between the two muzzle sections of the SLAB . Original Handguard Found Here: https://www.printables.com/model/524590 Silly's SLAB:…
What if you could pop a magazine into your SLAB with four or five short darts ready to go and ALSO single-loaddarts directly into the chamber? Here's my attempt at a hybrid loading system, based on Studio_Revoct's Zeal mag and using their…
Shotgun slide foregrip designed for a Sillybutts' Excalibur. May need to be modified for other Nerf-style blasters. The foregrip requires: Three #4 (3/8" long) self-tapping screws (you will have some left over from the Out of Darts…
A modern looking comfy trigger for the Breacher by Sillybutts. Metric! For imperial measurements you can modify the .step file :)
Extends original Alchemist mag release into a knuckleduster type monstrosity. As of 7/19/23 has not been game tested so use at your own risk. Vigorous shaking with Talon mag inserted did not lead to any unscheduled mag drops so should be…
This remixes Sillybutts collet nub with Meaker's N-Strike lug… for reasons.
Remixed from my original model, which uses 2 screws and was quite a hassle to assemble. That's the one in the picture, but they look the same. Now, the only hardware it needs is one M3 by either 8 or 12mm Allen head machine screw for…
This is the buttstock from SillyButts' Deuce Pro pump action mods. I modified it to include a nerf nstrike butt stock lug. The part needs supports but I didnt print any under the peg (used to tie into the existing screw hole at the back…
This is a simple jig to help mark the location of holes for SillyButt's Alchemist 19.5 inch bars. The jigs are printed in two pieces and friction fit / glue together. Make sure you slide your aluminum flat bar all the way to the end of…
Print with the same profile sillybutts provides. Both parts shown in the photos were printed without supports on a Bambu Lab A1 and work just fine.
Sillybutts made a great remix of the Smiley ram base that improves upon the geometry of the -123 o-ring grooves so that they're easier to print without supports. However, the ram base included with the Talon remix of the smiley has…
I designed this 10-degree BCAR to fit specifically on the Foxbat, with the stock barrel from Out of Darts. If you use a longer barrel, just about any BCAR with a 16mm fitting will work. 10 degrees is ideally suited to ~150 fps. To get a…
The Excalibur Threaded Breech is a replacement breech part designed to allow the Sillybutts Excalibur to accept 16mm threaded-breech barrels. Featuring a brass threaded insert in place of the barrel-retaining O-rings, this drop-in…
Put an insensible barrel of warcrimes onto your Marshmallow Extreme Blaster. I accept no responsibility for friendships lost from using this inappropriately. Visit…
This mod addresses the tolerance issues of the original Breacher QD sockets being too small, while adding stops to limit the rotation of the sling loops (which lock securely into position every 45 degrees). This includes the files for…
Very simple modification of the PBR t pull to let you add mega dart foam. Cut a mega dart by removing the tip then bisecting the remaining foam into equal halves, slip over the t pull on either side then add the discs/covers with x2 4-40…
Print a FRONT and a REAR unit and slide them onto your top rail. Each is a stout, full-wrap clamp that grips the whole rail profile — not a shallow lip (the real reason cheaper clamps pop off when you sling the blaster) — locked down by…
do you have the original bearings from a hardware kit laying around cause you made the linear rail alchemist instead? do you want your alchemists prime to be EVEN SMOOTHER? well LOOK NO FURTHER! this remix uses 6 of the original 7 POM…
need an additionnal two 8mm chc/conic hexaconal centered M3 screws. planned upgrade path: working easy AND sturdy independent calibration for both scope dual honeycomb lens hider (bc why not) side picatinny rail and maybe more will post…
Adjusted in Snapmaker Orca and printed for my project using the Snapmaker U1 (Used Bambu Labs A1 for the rest). I have set the part settings (walls, infill etc.) the same as Sillybutts used on his original model but I would check them…
Based off the real life SureFire Warden Direct-Thread Blast Regulator. This is the SCAR barrel that fits on aluminum barrels that is the “Exact” size of the original Warden. inside is the Spigot SCAR from Sillybutts.
The Sillybutts Cynthia Threaded Barrel Breech is a printed breech part that accepts any M16x1mm threaded-breech barrels using Out of Darts' custom brass threaded insert. Featuring a gently tapered hole, this part allows you to thread…
This grip attaches to the front slide of the Foxbat nerf blaster and slides on the bottom picrail, aided by a few rollers for smooth operation. I have remixed the default front slide to include mounting holes for 4-40 plastic screws.…
No hardware required Fusion 360 and STEP file are provided if modifications are needed ISSUES: The cheek rests do are not aligned properly leaving a channel between them, but the 3d model does not have the channel, so I don't know what…
Print with the same profile sillybutts provides. Both parts shown in the photos were printed without supports on a Bambu Lab A1 and work just fine.
Thanks if you want to buy me a coffee :) https://buymeacoffee.com/methanejuice You need the original Foxbat kit , plus the following: https://docs.google.com/spreadsheets/d/1KOiNNJb-DsYRX4Xing8HacSmP-WwXPeXNfO9-ASy6mA/edit?usp=sharing…
A new version for the “Lifter Roller” with ball bearings. I had the problem that the screw thread had eaten into the lifter roller (see pic), causing a lot of friction and making it very difficult, or even (if I pushed slowly) impossible…
A modern looking comfy trigger for the Breacher by Sillybutts. Metric! For imperial measurements you can modify the .step file :)
Sillybutts made a great remix of the Smiley ram base that improves upon the geometry of the -123 o-ring grooves so that they're easier to print without supports. However, the ram base included with the Talon remix of the smiley has…
