Counting matching models…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
remixed https://www.thingiverse.com/thing:4905821 to have 4 racks and removable base for flat printing. Have not tried to print, hope it works. Holds 40 pairs of earrings or 80 individual earrings.
The original STL from Creality K1 pendrive that came with printer. Reuploading if anyone needs it. Could not find a website source so I had to mark this as OC (although it isn't!!!)
Gohan adolescente SSJ traje Piccolo sin capa. Saga Celula (Cell)
Mittelkonsole für Suzuki Samurai sj413 mit supports gedruckt auf Ender 3 V3 Plus
Support me :: Please consider donating any amount as you see suitable to help me create more content and keep sharing it for free. Info :: This was a request from Koppa to (re-)create a model of the Mosby stasjon in Norway. We give this…
Adapter for Bosch GCM 8 SJL Mitre Saw to vacuum hose 37-38mm. Printed with 4 perimeters. No supports Infill 25%
After 4 years rubber bands on my Sjopenna Lamp got stretched to a point that it was falling apart. I found this model , but it was for the table lamp, so I created a set of similar clips in Fusion 360. To replace all rubber bands you'll…
Update 2019-06: v2 with improved clip flaps. Looking for a way to connect my non-Bosch workshop vacuum to the GCM8 SJL miter saw I came across Ruperts design, which looked appealing but was angled, which I did not need and which is…
⚡ Limited Edition: Goku (Super Saiyan) - Low Poly Geometric Figure ⚡ Elevate your collection with this unique fusion of modern digital art and iconic anime history. This isn't just a toy; it’s a minimalist masterpiece.
The sjrc f11 pro drone has a very low rear propeller, therefore it has problems with landing on grass and rocky terrain. Mounting the landing gear solves this problem (If you do not have a landing pad), because it raises the drone…
Designs to use with thin (1.2 mm) rubber pad for tighten fixation on the handlebar (ø22,3mm) Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: Doesn't Matter Supports: No Resolution: 0.2 Category: Camera
The otherwise very practical IKEA lamp, for clipping onto a shelf, has unfortunately broken. Both parts of the clamp broke after only a few years and the whole lamp could no longer be used. In FreeCAD I designed a replacement part for it,…
A shade for the IKEA JANSJÖ / Jansjo lamp to keep the direct side light out of your eyes if the lamp is mounted at eye level. Print instructions Licence: Creative Commons - Attribution Category: Household
Adapter to fit the Bosch Professional GCM8SJL to the osVAC platform. Remix of original Thing ID 3734911. Fitting to the osVAC M32 connector 4671596 and therefore can be used with the complete osVAC setup. To have smooth surfaces on both…
This is a Insert for Bosch GCM 8 SJ. They are no longer deliverable, so we made our own. It's a zero tolerance insert. You have to print it and cut slowly into it. A little bit of sandpaper gets rid of the fringes. Made by Q-tec GmbH…
🌌 ¡La forma definitiva del Saiyajin original desata su esencia salvaje! Este diseño captura la transformación más brutal de GT: pelo rojo furioso, ojos delineados de rojo y cola dorada que desafían toda lógica. 💡 EL CLÍMAX DE LA EVOLUCIÓN…
Oryginalny model od destjus Bestia jest wygłodniała… to znaczy wygładzona… Chodzą plotki, że drukowanie zawsze zajmuje 21h i 37minut niezależnie od ustawień druku i skali, drukarka zacznie grać Barkę po zakończeniu wydruku. Druk można…
This should print without supports, and can be scaled however you would like.
🌌 ¡El momento que cambió Dragon Ball para siempre cobra vida en estilo Funko! Capturamos la primera transformación Super Saiyajin: pelo erizado dorado, aura eléctrica y mirada de pura determinación que hizo historia en Namek. 💡 EL ICONO…
Adapter to fit the Bosch Professional GCM8SJL to the osVAC platform. Remix of original Thing ID 3734911. Fitting to the osVAC M32 connector 4671596 and therefore can be used with the complete osVAC setup. I printed it with PLA and it…
Splitshuisje voor het leren splitsen tijdens de rekenles voor leerlingen van groep 3, eind groep 4 in het reguliere onderwijs. Gooi 10 blokjes of balletjes etc in de schoorsteen van het splitshuisje en ze komen verdeeld in twee vakken van…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 100% infill Start with Black At layer #10 (0.88mm) swap to Blue At layer #13 (1.12mm) swap to Orange At layer #21 (1.76mm) swap to Jade White for the rest.
🌌 ¡El Saiyajin Legendario desata su ira en estilo Funko! Capturamos la esencia destructiva de Broly: músculos hipertrofiados, cabello verde esmeralda y aura de energía salvaje que domina cualquier vitrina. 💡 COLECCIÓN DE PODER BRUTO: 💥…
Based on layershifter's adapter , remixed in Tinkercad. If you want to customize it, head over to Tinkercad :)
MASJID AL-HARAM _ MECA ..para un gran amigo Category: Scans & Replicas
🌌 ¡La transformación más épica de Dragon Ball capturada en estilo Funko! Este diseño celebra la forma SSJ-3 con su icónico cabello dorado hasta los pies y aura sobrehumana, perfecto para dominar tu colección. 💡 EL REY DE TU VITRINA: 🏆…
🌌 ¡El momento en que el príncipe de los Saiyajins alcanzó la gloria dorada! Capturamos la transformación definitiva de Vegeta: pelo erizado, mirada desafiante y aura de pura arrogancia que congeló a Cell en su camino. 💡 EL COLECCIONABLE…
3D model of Gohan SSJJ. This model is allowed to assign different colours to each piece. The 3MF is very detailed. I hope others can have fun printing their very own Super Saiyan
The original very nicely clips on to the end of the Z-axis rail. This version adds a small clip for the IKEA Jasjö USB lamp which is very cheap but quite effective, shortens the arm and strengthens it where it joins to the base clip (as I…
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- This adapter is compatible with the Ikea Jansjo…
Adapter for the Bosch GCM SJ miter saw. The adapter is rotatable and equipped with a stop, allowing the hose to be fed in from all sides without touching the guide. Cut open the small tabs on the Bosch connector with a utility knife; they…
I wanted away to use 14500 lipo battery's (AA sized) with my SJ4000 clone action cam. I also added a gopro style mount to the bottom. Requires AA spring and dome plates plus some wire and female headers. More info at the blog post below.…
I designed this frame for necessity. Maybe I'm going to improve it, for example with a camera block system. If you have some ideas let me know that. There is also the Autodesk Fusion 360 file if you want to do some adjustment. Let me know…
Voor mensen die veel tekenen is dit wel een hulpmiddel. Rondjes tekenen zonder passer. Voor mensen die aan meetkunde doen. In 2 kleurern afgedrukt. This is a tool for people who draw a lot. Draw circles without a compass. For people who…
Seal rubber of iker Domsjö Atlant Print Settings Printer: Sidewinder X2 Rafts: No Supports: No Resolution: 0.15 Infill: 20% Gyroide Filament: Transparent 95A Premium TPU 95A Translucid Notes: No. Category: 3D Printing
Print Settings: Material: PLA Layer Height: 0.12mm Infill: 15% Supports: Tree Supports (Organic) Creation Process: This model was created using a hybrid workflow combining AI generation and manual 3D sculpting: AI Generation: The base…
english home battery case design for sjrc f11s is compatible with other f11 models, i recommend printing the main body vertically and the side flaps putting print holders is the only place needed project for those who want to mount their…
osVAC Adapter for Bosch Professional GCM 800 SJ
I've created this case model with openings on both sides because I couldn't find batteries for this camera, so I've decided to power it with a power bank. The tolerance is low, and the square hole in the front helps to remove the camera…
Kan je gebruiken om cirkels enzo te teken om wenskaarten, Can you use to draw circles etc on greeting cards
Jedná se o lokomotivu RC6 švédské železniční společnosti. Model je v měřítku "0" (1:45) s rozchodem 32 mm a je vytvořená jako součást OS Railway. Součástí jsou i soubory pro tisk jednotlivých částí a zdrojový kód pro arduino (ten ovšem…
This high-detail bas-relief wall sculpture features a Super Saiyan 1–inspired warrior dramatically emerging from a cracked stone frame. The design captures intense facial expression, dynamic spiky hair, and muscular anatomy carved in deep…
Headphones (or anything else) hook for Ikea's VITTSJÖ shelf unit . Decided to design my own hook, that is shaped to better match headphones overhead shape. Bent form provides a bit more strength for the hook too. Now my headphones won't…
The church of Själevad is widely regarded as one of Sweden's most beautiful churches. Scale models in plaster where made as Christmas decoration many many years ago, but are now few and far between. I therefore recreated the church as a…
This model is a high-detail bas-relief wall sculpture inspired by anime-style warriors. The character emerges dynamically from a fractured stone frame, accompanied by an Eastern dragon wrapping around the composition. The design…
Om een silhouet van ballons te teken op kaartjes, To draw a silhouette of balloons on cards.
Modelo base para crear monturas para camaras de acción (incluye proyecto FreeCAD con ejemplos). A partir de esto podrás crear diferentes monturas según tus necesidades. Incluye dos modelos, con hueco para tuerca y liso para palomilla, y…
Struggled to a find a commercially available fascia to adapt a 2DIN Sony XAV-AX1000 to suit a Subaru Forester SJ 2013-2014 with the Harmon Kardon headunit. This one does fit these exact models, unsure if it would fit other models or…
English: I created a spacer to mount the new measuring tool from Parkside (Lidl) on the Bosch GCM8SJL. It works with it. It is best to place it very centrally. Printed with Anycubic Kobra 2 max. Maybe it is better if you print the infill…
If you are having trouble with the transfer case being stuck in neutral, you may need to replace the shifter bush. To remove the shifter bush, remove the boot on the inside of the vehicle, then remove the boot on the transfer case, then…
Air turbine Hilti WSJ 110 Print instructions Category: Parts Summary Air turbine Hilti WSJ 110 Print Settings Printer Brand: Anet Printer: A6 Rafts: No Supports: Yes Resolution: 0,35 Infill: 100%
This is a Dash Cam mount for a 2013 Toyota Tacoma. It mounts a SJ4000 camera (may fit GoPro's) discreetly up behind the rear view mirror. The mount clamps to the rear view mirror post and uses a few 4-40" Screws and Heat-Set inserts for…
90 degree adapter for the dust extraction port of the Bosch GCM 8 SJL miter saw, allowing for a tighter placement towards the back wall. Fits the 41mm dust port of the Bosch saw without “quick click” system. Releases 2024.05.29 v1.3…
Tight fit to hold the weight of the LED-Lamp. No support needed Gcode: 250°C, Bed 70°C, first layer 20/mm/s Print instructions 15% infill, PETG,. No support needed.
This is my second derivative work from Rupert's original already - and, although there is not much left of his original design I want to give credit where it is due. If you really want to max out the throughput and cleaning power of the…
Since the original model always broke when putting it on the lamp I remixed it. Increased size to 102% to prevent breaking while putting the shade on the lamp doubled the wall size added screws for the diffusor as a design element → use…
Model This is a drawer and/or basket with a honeycomb decoration for the IKEA NYSJÖN high cabinet. Ideal for bathroom organization such as those pesky loose towels, deodorant cans, cotten wipes, tubes of toothpaste, dental floss.. You…
These retainer clips go on the bottom of the rocker panel.
Pencil holder for IKEA Jansjö lamp. Includes an opening for the cable.
I have created a quick remix of the original JANSJÖ shade that is closed and has a little bit thinner wall thickness to let more light shine through. I have printed it in yellow PLA to create a warm light. I am using the lamp as a night…
Stitch Super Saiyan (SSJ) Mashup Figurine Fully painted crossover figure combining Disney's Stitch with Dragon Ball's Super Saiyan aesthetic. Features a muscular blue body, wide toothy grin, spiky yellow hair, orange martial arts gi, dark…
Hood / Shade for the USB version of IKEA Jansjo. push-fit (snug fit) clips onto head of USB Jansjo Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No Resolution: 0.2mm Layer Height Infill: 30%…
Fits either 1 or 5 batteries. Designed with a lip so the batteries don't fall out but are easy to remove. Can make versions with less/more batteries upon request. Print instructions Category: Camera Print Settings Printer: Anet A8 E3D v6…
Lichtgevende meisjes naam Eva, Luminous women's name Eva
Tren de aterrizaje para el SJRC F11 Imprimir dos veces cada archivo con un relleno del 50% La colocacion es sencilla,la parte curvada de la pieza va en en angulo inferior del brazo tal como se observa en la imagen
Use a doble sided tape to attach it.
A sturdy double airbrush holder for your Neoeco NCT SJ83 airbrush
This is a zero-tolerance insert for the Bosch GCM 8 SJL. You must print it out, assemble it, and saw through it carefully.
Uchwyt boczny na dwa magazynki do AR15 lub do CMMG (.22lr). Uchwyt mocowany na magnes główny D20 (śruba M4 o długości ~25mm) oraz magnesy boczne płytkowe o wymiarach 20x10x1 mm (opcja 1: dwa magnesy boczne, opcja 2: cztery magnesy).…
Broly SSJ Pose 2 escala 1.6 Dragon Ball Z com cortes e encaixes
My wife uses an IKEA Jansjo light on her bedside table for reading, and it's a little too bright for that task. This dims the light to your preferred level and narrows the beam so the room stays nice and dark. Works great! Thanks to…
Designed a camera case to mount on one leg the Ikea Lack Enclosure. You can tilt it left / right, up / down. You need: 2x M4x16 Srew 2x M4 Nut 4x M4 Washer 2x 5.0x20 Wood Screw or similar Suitable glue to stick on the hinge parts (i used…
This is a guard that you put at the end of this saw
This is the rear scan of a 1988 Suzuki Samurai. Should be the same as a Jimny and a Sierra. I took this to design a bumper for it, and it should work for other needs as well. If you design something cool with it, share a pic!
I made the original a little bigger and added a Diffusor. The Diffusor was printed in transparent PLA and with no bottom skins. Hope you like it, pls post a make!
This is an attempt to design as compact as possible 3 axis brushless gimbal for SJCAM and gopro cameras. Gimbal is designed with RCTimer GBM2804 motors in mind and targets (with the current frame mount) a flamewheel like frame with 37mm…
Subaru Forester SJ Cover Catcher Subaru OEM PNs: 94053AL100; 94053FJ000 Print inclined with organic supports, using the print post in the model itself. This reduces supports and keeps visible surfaces clean of support remains. Print post…
Naked frame for sj4000 action camera 28.3g weight. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Solutech PLA Black Notes: PLA and .2 layer makes the face lock to…
Kan je gebruiken om cirkels enzo te teken om wenskaarten, Can you use to draw circles etc on greeting cards.
🌌 ¡El guerrero que viajó en el tiempo para salvar el mundo revive en estilo Funko! Capturamos la esencia del Trunks del futuro: pelo lavanda electrizado, espada legendaria y mirada determinada que enfrentó a los androides. 💡 EL SALVADOR…
Zenmuse H3-3D Gimbal SJCAM adapter (based on SJ5000+) The cable can be made by removing the USB connector from gopro hero3 USB cable supplied with the gimbal and soldering the SJCAM/XIAOMI micro USB to AV cable instead (2nd photo).…
its just the game
Approximately 1/6th scale model of an Olson SJ acoustic guitar I created for my brother for Christmas. The guitar is most famously played by James Taylor. This is non-playable and for display purposes only. I'm also including files for a…
Both fit 3D printed Shock Proof Plank ( https://www.printables.com/model/908818-laegendary-sonic-116-scale-rc-replacement-shock-pr) as Shock Proof Plank is same for front and back. Only front fits original front Shock Proof Plank.…
Printed in Ender PLA 0.16mm layer height with 30% infill and zig zag supports in cura. 1hr 38 min print time and 10g 1.75mm PLA (3.42m)
I shortened vertigo235's JANSJO shade so that it wouldn't block my C270 webcam (mounted with this clip ), and added notches to hold a thin diffuser that was inspired by this Thingiverse model . Print the shade in a dark plastic that won't…
Lichtgevende meisjes naam Millie, Luminous women's name Millie
This flat mount for the Ikea JANSJÖ lamp acts as a mounting base for the lamp. There are four chamfered holes that can be used to securely mount the JANSJÖ. Support If you'd like to support me for the 3D models I distribute for free, you…
Handle that works for SJCAM C100+ and also probably any GoPro. Simple, but buoyant, as it isn't solid. This makes it perfect for filming, as its light, and perfect for things like snorkeling, because it is buoyant enough to float the…
Fits very nice on Eken H9, and also added a little support behind for power button and shot button. Probably fits on SJCAM xxxx and many other chinese action cameras. I printed it on TPU with supports just on floor Category: Hobby
This is a complete replacement for the SJÖPENNA IKEA lamp beside the lampshade. It includes an LED rail on which an led strip with a width of 12mm or less can be placed (Like APA102, ws2812b) as well as a controller housing on which a Pcb…
Ther wrapping paper holder is designt for IKEA VITTSJÖ shelf. You need all three parts for one paper holder.
A mount to attach a Logitech C270 to an IKEA Jansjo light. I started with this design by sthone: https://www.thingiverse.com/thing:1691549 But it was quite long for my purpose (I use the clamp Jansjo version) so I decided to turn things…
Uchwyt boczny na trzy magazynki do AR15 lub do CMMG (.22lr). Uchwyt mocowany na dwa magnesy główne D20 (śruba M4 o długości ~25mm), dwa boczne magnesy oraz magnesy boczne płytkowe o wymiarach 20x10x1 mm). Standardowe PLA, wypełnienie min.…
Update: Removed the wire cutout as it seemed to weaken the part and was unnecessary. My son broke the front Shock Proof Plank (Part Number SN-SJ12) on his LAEGENDARY Sonic 1:16 RC car and they have been out of stock for a long time (maybe…
![Rzułta Bestia z Wadowic Cerber / Hydra 3 Głowy wersja wygładzona [Remix] Papież Jan Paweł II 2137 Papaj](https://media.printables.com/media/prints/34a40ceb-d849-4b04-b5d5-f337baa87813/images/10127601_fbb6c14b-4c5a-47f6-99f6-77b2e6689dca_c2c24bb1-8a36-47db-bfd8-e1373e6ecc9b/img_20250620_125203.jpg)
