Counting matching models…
I took a game model and posed it in blender. Supports are a pain, and the hat is really thin. BE CAREFUL. I think I used 30 or 40 percent infill. Enough to be solid on thin parts but not ridiculous. There are some modeling errors, but…
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…
Here ist my Box für Skipbo Cards based on “Rugged Box” by Whity. I used the inner box from “UNO Card Box” by Markus_p. You need the inner box 2 times. Use 6 M3x30mm cap screws to assemble the box.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I didn't like the existing models, so I designed my own. You…
My interpretation of Skippy, the AI assistant of the Iconic variant of the Arasaka HJKE-11 Yukimura in Cyberpunk 2077
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- This tool was designed to make the bed leveling easier and safer for Creality K1 and K1 Max 3D printers. It's made…
I present a full size replica of the pistol from cyberpunk 2077 with a lots of details. It has a detchable magazine attached to magnets All parts should fit in a regular 220x220 mm 3d printer Print Settings Printer Brand: Creality…
Your kids will know this. from a youtube meme type thing.. please share your makes.
This model was designed to solve the age old problem of messy Skip-Bo games. While many card trays are already available to download, none of them seem to have thought about storage or transport of the cards, meaning you'd have to store…
This is a remex of the Skip-Bo Card Box from Markus_p (Thank you very much for providing your model data!!). I had the problem that not all cards are inside of the inner box and I wanted to put the instructions in the box. So I made a 5mm…
I remixed the top part of this design, I tinkered some Skip-Bo elements and 2 pairs of recesses on top and on the sides for better handling to it. The locking tabs of the bottom part are modified slightly. The bottom was really a tight…
I call this the Skippy Oak boomerang because it has kinked wings like the Janetzki Brothers' Skippy, and because one specimen I have made of wood consists of oak scraps. Should fly a nice midrange circle. Throw rather low and with a bit…
UPDATE: 1/6/26 Added a scaled top for a better fit with newer printers. Added complete top with top and letters that can easily be colored in slicer for Multiple Material Prints Skip-Bo Card Box - This box is designed to print without…
This is a remix of dergogo's original box. The bottom part is as dergogo's original design. I modified the top lid with the following additional features: Added finger cutouts so that you can access the locking tabs more easily if they…
Based on the original model of JuL. I made a box to hold the SkipBo card deck. Since the orignal design had the wrong logo I replaced it with one from the web. I used a logo from the internet to add the specific touch. The original…
So the anycubic kobra s1 bed comes terribly leveled out of the box lot of times. This simple tools helps manually level all there bed point ( front left and right and back middle) where frame is connected to z motion system by the way of…
This Skip-Bo Card Rack is an essential center piece to help keep your game night on track! It features a unique Vonoroi pattern in the center that shifts depending on your viewing angle! To create the model that I photographed, I used the…
Remixed the Monster8 DIN mount from Clee to accept the wider footprint of the MKS Skipr. Uses 4 heatserts (M3x4x5)
Inserted the letters for multi color printing
I always had a soft spot for boomerangs with extra kinks in their wings, such as the Janetzi brothers' "Skippy" . So here's my take on that idea. As always, if the boomerang flies to low, just add a little dihedral, i.e., bend the…
This remix features a SkipBo logo more suited for multi-color 3D printers. I have also included a fixed version of the No-Logo lid. Better for placing custom SVGs on to.
I used to have a toy called a skip disc but it eventually fell apart, so I designed my own version, the Skipbee. It is kind of like an upside down frisbee. Print flat side down in TPU or some other flexible with only 2 perimeters so that…
Skips from the Regular Show
This multi-color 3D printed box is designed specifically for storing Skip-Bo cards, combining practicality with a touch of nostalgia. It features a retro-style "Skip-Bo" logo, adding vintage charm to your card game collection. The box has…
I've designed a ski pole mount compatible with my Insta360 invisible selfie stick. i used TPU inlays. Let me know if you prefer a version without. Additionally, you can adjust the diameter by modifying the .step file. the stl is for…
This case holds a full Skip-Bo card deck. After the first print I noticed the case was just too small to hold the card deck uncompressed (as you can see in the picture). I added 2 mm to the model, but was too lazy for a reprint of my own.…
Object Description: This SkipBo box is easy to open and close. But the closing mechanism reliably keeps the box closed. The box also offers old, thicker cards enough space. The hinge-pins are designed to have a slight press-fit. This…
Requested by someone, you can make all these changes and your own remix by using the original files and changing up the specifications (per instructions) in FREE* onshape account.
I'm so tired of klipper over heating, so I make this model. you can use "fan generic" in klipper to controll the 5010 turbo fan if it is too noisy.
This is a for the SKIP-BO card game. The lower part of the box is a very simple print. No supports or anything special. The lid is printrd facing up and requires supports to allow for the color changes that form the logo. The included…
Print from PETG or ABS/ASA or other higher temp filament who can survive 80c, but not PLA. Back plate can use studs or just glue. Im include step file to future edit if need.
Steam locos need coal. This skip truck is an add-on to your coaling station and is used to replenish the steam locomotive's coal reservoir. You need also 2 H0 gauge axles which fit to the small tracks of the coaling station. I used…
This a model of a typical German rowing boat . It is intended as a model on a RC boat. You can downsize it to about 4cm. The platforms are from mahonie wood veneer and cut with a laser engraver.
This cute kangaroo card is a perfect gift from the land down under! It's a quick little print and simply slots together after the pieces have been cut loose. Print instructions The card is designed to be printed at a 0.2 mm layer height.…
If you've even played Skipbo, the card situation can get out of hand. This is an organizer and a storage solution for your cards. Design features include slots to easily remove the piles when they're complete. Grooves for rubber bands to…
Remix of the Rugged Box (Parametric) from Whity
Description Skipper—Barbie’s adventurous younger sister—has always had her own playful, modern sense of style. These heeled sandals are designed specifically for the modern Skipper doll foot, giving her a fashionable accessory that works…
3Dsets Skippy Boats ESC switch holder for QuicRun WP 16BL30 req. 3x M2x6 socked head screw 10.11. 2023 - added holder WP 16BL120
My grandfather used to make something similar using wood. While I would love to do the same, I don't have the expansive wood shop that he did, so I took a more modern route and designed this model to accomplish the same thing. Print 1…
Designed this to help my friend's OCD on constantly adjusting the piles as we play. I decided to create a smaller version that can be printed in a smaller foot print
Re-design of the inner box to have the additional chamfer and marking on the narrow side so that the lid can close without catching on it. Everything set up ready to print in the 3mf (import as project), just change the printer and the…
Ja moin, Hier ist ein Spielbrett für Skip-Bo, das etwas von den originalen Spielregeln abweicht. In der Mitte befindet sich der übliche Kartenstapel und rechts sowie links jeweils zwei Ablagestapel. Im Gegensatz zum Original sind die…
Hi 3D printing friends! This is a ball joint that fits the Skip Hop Baby Backseat Car Mirror. The ball is larger and more sturdy than the one that comes with the mirror, and has the ability to tighten and clamp down on the ball so it…
Salut, Voici une boite de rangement pour les cartes du jeu Skip.Bo. Les cartes font 87mm x 56mm
Simple Skip-Bo storage box with embossed lid. No AMS required. 🖨 Printing: (This is all taken care of in the provided 3MF file) Print the lid and the box separately to avoid a slight layer shift due to the lid finishing earlier than the…
A more powerfull 3 bladed Prop for 3D Sets Skippy
Needed a good universal motherboard tray to suit the Makerbase MKS-SKIPR board along with their new UTC CANBUS board. Print from anything you like, but I would avoid PLA unless the environment is cool, otherwise, ABS at a minimum, You can…
You can replace the stock QIDI mainboard with a Makerbase SKIPR using this mounting plate. There is also a bracket to install three 40x40 cooling fan. The MKS-SKIPR can be installed horizontally or vertically as you prefer. Tested on my…
This is version 2 of my custom electrical wire fastener/clip. I've added a countersink to support an additional type of screw while leaving a large flat area for the ¾" #8 lath screws I'm using. The large flat head screws are ideal for…
This is a slightly modified version of this design . I changed around the angles of the wingtips and distorted the elbow slightly. The intention was to make the boomerang fly a little bit higher, which seems to have worked.
All the parts are new, so no recycling of other prints. This die and inserts can be printed without a multi material unit. I tried to make a die that was easy to print with multiple colors without a multi material unit. Size of the die is…
for MK4 users , keep the speed down and without input shaper increase Temp. a bit for better layer adhesion printed wit Prusament PLA
How to print (in accordance with #3DBenchy license): - Open your Prusa Slicer - Import the Benchy and the Rabbit (with custom support for one ear) - enable supports «For support enforcers only» - Merge them - Delete the helper_disk…
This is a box used to store playing cards. The lid/hing part is a print-in-place part. The hing is then glued to the box (I just used crazy glue). The SkipBo part is a multi part file, just in case you have a multi filament printer.
Starting my journey into 3D printing coming from a VFX background. I decided to work on something with a relatively simple shape, complex textures and some usefulness. After a rewatch of Star Wars Ep4 - The Lars homestead stood out.…
SkipBo - Box + Lid with specific hole to see the name of the game
Skip-Bo card box for old version of game with card size of 87x56mm. The lid is embossed with the name and has a snap shut on each side.
The print-in-place hinges have a .3 mm tolerance, a test print for the hinge is included if you wish to check if your printer can handle them. You will need to print 2 "top" pieces. .step files for top and middle included
This U-Skip is based on pictures from a 1920's Hudson catalogue. The skip is designed to 16mm:ft scale to run on 32mm gauge track. You'll need print four wheels and bearing parts, two ends and supports and one chassis and body. If you…
This is a trial version, I still don't have the ship fully assembled. Adjustable trailer stand for Skippy boat. The center of gravity can be set according to the equipment. For a separate trailer, the center of gravity is marked on the…
Hi, Have you guys ever seen those skipping ropes from Rogue fitness and are over priced for having beads take a look: - https://www.roguefitness.com/rx-frevo-jump-rope So, i decided why not make them using 3d printer and the design is…
You can fit 2-3 decks of cards in this holder. Print instructions I have printed this holder in PETG and PLA with ease.
Finally, a place to store your cards. Also suitable for small printers Endlich eine Ablage für die Karten Passend auch für kleine Drucker
A tray and case for Skip-Bo. It also fits older cards that have worn a bit more. There is a small tab on the inside of the case so that the tray doenst spill out during storage/transport. It will not be enough for rough handling. The case…
Hate watching those pesky video ads that play before your favorite cat videos on Youtube? You can easily skip it with one tap on the “>>” key on this mini keyboard. Those small ad banners that pop up at the bottom can also be quickly…
This design is kind of similar to this one , the main difference being that this one was made in Onshape (as opposed to Blender for the other one). Throw not too high with a bit of layover. Should do a nice mid-range (35-ish meters)…
It's a beautiful day, I think I'll skip my meds and stir things up a bit, sign Category: Signs & Logos
This box has space for the Skip-Bo card game. It is nicer to look at and more robust than the original cardboard version. The box is printed from PLA and requires 6 M3x30 screws.
Shortened the basket. Pieces by .5mm each so the instructions would fit under the bottom, added the skip bo logo and add
I printed this holder on my ender 3 v2 because the old box was bad. it is in 3D and in multiple prints so you can choose any color you want, I had chosen the traditional colors but I also made one that is completely gold.
Handles for skipping rope with 606 ball bearing. 2 x 606 ball bearing required for each handle (4 in total). The outer bearing is press-fit, the inner one is loos-fit, you can pull it in using the rope itself. Supports are required for…
Here is the original box design by Jujumo (Thank you!) https://www.thingiverse.com/thing:5217074 I just updated the logo on the lid with the actual Skip-Bo logo. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
The only a simple holder for skipping rope. Print instructions Category: Sport & Outdoors Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 20 Infill: 15 Filament: prusament PLA galaxy black
Only one of my skip trucks has a bracket to hook it to the crane. Therefore I created an additional bracket for the second truck. May also be used as a replacement part. Please note that original POLA G spare parts are available from…
A printable skipping stone that I think will work. I have not tested it yet so I will probably update this and say what infill works the best for reusable.
Prints relatively fast so you don't have to wait forever to change the filament. ;) Also added the recent design with the elliptical hypen. At 0.2 mm layer height change the filament after printing the 4th layer.
Part of the Classic Games Collection Remember the Skip-It? How about the Lemon Twist? Footsie is a classic game that has allowed both kids and adults to have fun while exercising for over 100yrs. As universal as jump-rope, and with about…
Eine Kartenbox passend für SkipBo Spielkarten. Gedruckt mit einem Anycubic Vyper.
Printable handles for creating a skipping / jumping rope. Every part is needed printed 2 times. Additionally you will need 2x Bearing 2x m2 brass nut 2x short m2 screw (I have cutted mine with a side cutter) 1x rope, max. 5mm diameter.…
[v0.1.1] Wir haben einen Skip-Bo Kartensatz in einer Blechdose. Der originale Pappeinsatz war uns weder haltbar genug noch besonders gut im handling. Dieses Druckobjekt ist unsere abhilfe.
Boîte de Jeu de cartes Skip.Bo avec sabot
Printed in PLA, without skirts or supports.
Handles for skipping rope The ball bearings on the handles of the skipping rope were rusty. Doubbel unders are no longer suitable for fast rope jumping. The 2.5mm thick rope can still be used. So decided to construckt a handle with a…
It's a beautiful day, I think I'll skip my meds and stir things up a bit, sign Category: Signs & Logos
I initially printed a pair of handles in PLA. PLA tends to be brittle, which made the model break after a few days. I then printed a new pair in TPU, and it turned out to be much more durable and resistant. If you need extra strength and…
I have removed the existing logo and exchanged the new Skip-Bo logo for the older version to suit my Skip-Bo deck from the 1993. 3MF uploaded for convenience with colour painting and MMU printing. The box colour is painted #1, The Skip-Bo…
Skipping Rope or Jump Rope Handle It features a standard 608 skateboard bearing. It is held together using four self-tapping wood screws. Each handle consists of three parts, the front and back of the handle and the knot holder. The…
This is basically the same shape as the Skippy Oak , only with a slightly tighter included angle. Throw not too high and with a bit of layover. Print instructions Print Settings Resolution: 0.2 mm Infill: 30% </div> Notes: I usually use…
Separated the files for more convenient printing (original link not providable). Also added a version with the text cut out of the lid instead of being embossed. June 2022: added blank lid
Hang your skipping rope / jump rope on the wall with a removable mounting strip. Printing with a 0.8 nozzle in draft mode with no supports seems to do the trick. Scale the 200mm wide part as desired.
This is a 2 piece box for Skip-Bo cards. Our old, cardboard box just wasn't cutting it anymore. I have included the .3mf from Fusion 360 of the top and bottom of the box, as well as the .3mf saved from Orca so you can just upload it and…
This box has space for two Sets of the Skip-Bo card game. It is nicer to look at and more robust than the original cardboard version. The box is printed from PLA and requires 6 M3x30 screws.
Skippy the Scout Ai Hi-Res -squirrel- (scale it) i didnt test it on printer.
I upgraded to a MKS-SKIPR with Klipper. Didn't like any of the available mounts, so here is my own for you to use. I made the M3's only 3.1mm and it was a tight fit so you may need to drill them out or put hole compensation on, but it…
