Search results: sour

Counting matching models…

Sourpatch kidss

15% infill or more Scale to preference Supports on

Downloads: 1,988
Likes: 511
Rating: 5

Hirth Joint with Source Files and Documentation

This is a geometrically CORRECT Hirth joint. It includes SOURCE files and DOCUMENTATION. There are a lot of Hirth joints out there. Some are completely wrong, some are very close, but almost none of them are geometrically correct. If you…

Downloads: 1,340
Likes: 138
Rating: 5

Order a print of this model

PrintablesRack Robotics Official

WT-01 V1.1 | Opensource Wire EDM Tool

Introducing the WT-01 V1.1, the world's easiest wire EDM conversion! Designed for all desktop 3D printers, the WT-01 easily converts your FDM machine into a metal cutting powerhouse! Electrical discharge machining, or EDM, vaporizes any…

Downloads: 294
Likes: 25
Rating: 4

Order a print of this model

PrintablesTheTrain

Open Stick Modular - Mini (OSM-Mini) Open Source 3D printable arcade stick

# 3D Printable Open Stick Modular - Mini (OSM-Mini) --- ## Attribution The following text must be included in any distribution of derivatives of this board. All links must also be included. Copyright 2024…

Downloads: 254
Likes: 44
Rating: 5

Order a print of this model

Printablessalveo

Macro Photography Slider - Open Source Project

I created this slider for macro photography. It uses widely available 3D printing hardware for the most part, and it's fully open source! You can see the design workflow and the slider in action here: The best part of using a 2020…

Downloads: 221
Likes: 134
Rating: 5

Order a print of this model

PrintablesBrett Crouch

TBS Source One V6 Camera Bumpers

Use TPU filament at 100% infill density and normal supports (no tree). Lay the outside surface down on the plate. Mirror the part in slicer for the other side. As always, I recommend to use the .step file over the .stl file if possible.…

Downloads: 127
Likes: 7
Rating: 0

Order a print of this model

PrintablesJens Friedrich

Source Deuter Bladder Dryer 3l

Dryer for Source Deuter hydration bladder 3l Version 1 as shown in the photos without step at the dryer's foot. Verision 2 with step at the dryer's foot for stabilized standing and better ventilation. Print Settings Rafts: No Supports:…

Downloads: 125
Likes: 13
Rating: 5

Order a print of this model

PrintablesFang-Pen Lin

TinyRack - An open-source modular customizable mini server rack

As a software engineer, I run and maintain a bare-metal Kubernetes cluster on my mini PCs. I used to stack them on top of each other, and they would get extremely hot under heavy loads because there was almost no room for airflow. I’ve…

Downloads: 122
Likes: 35
Rating: 0

Order a print of this model

Printableshihoberry

Resource trays, tile/token containers, & mini commander trays - remix - Dune Imperium Uprising + Bloodlines

Replaces the token containers from the original insert

Downloads: 95
Likes: 15
Rating: 4.5

Order a print of this model

PrintablesBewhaman

Sour patch Bite Me

As I was making a set of these for my grandson to play with, I realized I hadn't tested whether they were sour then sweet. So I had to take a bite and test it.

Downloads: 88
Likes: 7
Rating: 0

Order a print of this model

PrintablesRob @ OpenSourceEV

OpenSourceEV NACS Adapter Dust Cover

OpenSourceEV Parts designs, produces, and retails 3D printed parts for Rivian EVs. We're Open Source because we post the STL files for every single product that we design so everyone can remix or 3D print them at home for little to no…

Downloads: 69
Likes: 3
Rating: 0

Order a print of this model

PrintablesSpace

TBS Source One v5 XT60 cable mount

Downloads: 57
Likes: 4
Rating: 0

Order a print of this model

PrintablesSpace

TBS Source One v5 Bumper

TBS Source One v5 Bumper made out of TPU

Downloads: 26
Likes: 3
Rating: 0

Order a print of this model

PrintablesSpace

TBS Source One v5 Capacitor Mount

TBS Source One v5 Capacitor Mount made out of TPU

Downloads: 25
Likes: 2
Rating: 0

Order a print of this model

PrintablesMatiasV

FR-SourceOnce - VIFLY Buzzer & Cap Mount

Quick Edit with Tinkercad adding a mount for a VIFLY buzzera 13mm Capacitor with space for a Skystars ELRS RX under the cap https://www.tinkercad.com/things/8fE27xkF3Dk

Downloads: 22
Likes: 0
Rating: 0

Order a print of this model

PrintablesKaktus_4

5x12 Resource Cubes Holder Grid

5x12 grid cube holder for board games resource cubes 8x8 mm.

Downloads: 17
Likes: 2
Rating: 0

Order a print of this model

Printablessecv

Source Files: "Potbelly" Sci-Fi Blaster Prop

Source file for the “Potbelly” sci-fi blaster. The grip attachment is compatible with AR-15 pistol grips.

Downloads: 15
Likes: 3
Rating: 0

Order a print of this model

PrintablesKurtineczDesigns

WLED Open Source Project Case and Mount

This is the case and mount for the WLED open source project. Mount currently designed for RatRig vCore4 backpack. I only designed the case and mount ALL other credit goes to the original designers and developers of WLED. Parts List One…

Downloads: 11
Likes: 2
Rating: 0

Order a print of this model

PrintablesTito B

Open Source Multi-Purpose Super Awesome Really Useful Cube

Ever needed a cube for various reasons? Well, here you are! You can use this cube for a test print, a spacer, or maybe feeding a Lego dinosaur... I have included four different files: there is .stl AND .step files, and both of those file…

Downloads: 7
Likes: 3
Rating: 0

Order a print of this model

PrintablesRickJ19Zeta8

RatPack Large US Sourced Filter Adapter

An adapter for the large Rat Pack filter assembly to the readily available Hunter 125x125x29mm charcoal HEPA filter. Hunter F1715HE5 True HEPA Replaceement Air Purifier Filter 2-Pack for Model HT1715

Downloads: 4
Likes: 1
Rating: 0

Order a print of this model

Printables

Tension Buckle for 38mm Straps - Source Files Included

Heavy duty buckle used to level up my laptop bag with a more industrial look. The buckle is super strong, easy to install on an existing bag without the need to sew. I'm using it on my daily laptop bag and it works well. Straps are easy…

Order a print of this model

Printables

Wilma Tüftelbausteine - Open-Source Prototyping Kit

Note: All content on this page was translated in collaboration with an assistant. The original website is in German, and you can find all details and information in German on Wilma Tüftelbausteine . What are the Wilma Tüftelbausteine?…

Order a print of this model

Printables

My Open Source Motorized Bionic Hand

With just some nylon threads, 6 motors, and an Arduino, you can build your own hand. I'm also sharing the code. It’s more of an aesthetic solution, and it's also intended for robots. Here in action: When printing the fingers, set the…

Order a print of this model

Printables

Dishwasher status (multi-language + source files)

This remix is heavily based on the design from Seth Kampa but with some differences/improvements: The sources files are available in FreeCAD format. Feel free to remix and make new modifications. 4 M3 screws and nuts are required for…

Order a print of this model

Printables

Shoe Stretcher Repair Kit and Addons (Thread, Big Toe, Longer Heel) - with FreeCAD source

I always wonder why they make narrow shoes. Are there people who don't have big toes on their feet? I've bought a shoe-stretcher to widen space for the big toes, but it also has non-anatomic shape (the left and the right foot is the…

Order a print of this model

Printables

OpenSourceSDR Lab AMP case

H4Mのアクセサリーとして同梱されている50MHz〜6GHz20dBアンプのケースタイトに作成しているので、AMP基板によっては入らないかもしれない。 Case-AとBの固定は爪以外にボスの0.05mmのオーバーラップを利用している。基板をCase-A,Bのボスで挟み込みガタツキを防止している。一旦ケースを組み合わせると分解は困難。開封にはCaseの天板と側壁の隙間に薄い板を差し込み、こじりあける。…

Order a print of this model

Printables

Gridfinity Fine Source Caliper Holder

This is a split gridfinity holder that can hold these cheap chinese 6 inch calipers. I'm sure other cheap chinese calipers can fit in it as well. It has 6 battery slots. It also features a couple other holes for things that I had in my…

Order a print of this model

Printables

Earth + Abundance Resource Holder

This is replacement resource holder (print 2x) for excellent insert to hold the premium upgraded components and Abundance's seeds as well as separately printed currency tokens.

Order a print of this model

Printables

CR2032 dummy battery for alternative power source

This is a simple and effective CR2032 dummy battery designed to let you power 3V devices using alternative power source, for example rechargeable AA or AAA batteries instead of disposable CR2032 cells. It’s an ideal solution for smart…

Order a print of this model

Printables

BD1 "Chimera" - Open source FPV 2.2" drone

BD1 “Chimera” Made in Poland Chimera is 2,2" freestyle cinewhoop type drone, for 3S batteries, with fully 3D printed construction Ready-to-flight mass(with lamp, battery and wings) : <200grams Carry weight : Can fly with light action…

Order a print of this model

Printables

Open-Source Storage Caddy

A modular system with simple yet effective caddy system.

Order a print of this model

Printables

Resource trays, tile/token containers, & mini commander trays - remix - Dune Imperium Uprising + Bloodlines

Replaces the token containers from the original insert

Order a print of this model

Printables

TinyRack - An open-source modular customizable mini server rack

Order a print of this model

Printables

ToolBox with handle and sections - Open Source and fully parametric

This is a toolbox with two main sections. One of them is divided into smaller sections. Main model: 220mm width Mini model: 180mm width But it's fully parametric, you can use FreeCAD to edit the whole ToolBox Here's my shorts video about…

Order a print of this model

Printables

Landing gear for Playmo plane (Fusion 360 source INCLUDED)

Landing gear for Playmo plane

Order a print of this model

Printables

Samsung S25 Ultra Stylus Adapter (Fusion 360 source INCLUDED)

Stylus Adapter for Samsung S25 Ultra to ease usage.

Order a print of this model

Printables

Simple replacement for Resource Tray for Puerto Rico 1897 Special Edition

This model is a direct swap replacement for a vacuum molded tray from Puerto Rico 1897 Special Edition published by Alea and Awaken Realms. The stock tray is excellent and fit for purpose in storage. I prefer this on the table as it is…

Order a print of this model

Printables

Parametric Fingerboard Molds Generator - DEMO SHAPE & CALIBRATION (Source Code Included)

🚨 CRITICAL UPDATE: THIS FREECAD VERSION IS OFFICIALLY DEPRECATED 🚨 This legacy version is dead and will no longer receive updates. I have written from the ground up MOLD F.O.R.G.E., a 100% Free, Standalone Desktop App (Windows, macOS,…

Order a print of this model

Printables

Boitier avec de Gros Boutons Intégrés pour Telmi, la conteuse opensource.

Plus d'infos sur www.telmi.fr Mise a jour aout 2026: -HP plus volumineux (ce modele: https://fr.aliexpress.com/item/1005008267342362.html ) Le seul HP offrant un vrai bon son en shuntant le HP d'origine! (sur la douzaine de modeles…

Order a print of this model

Printables

Soul Source Dilator Stand

Simple holder for the four standard sizes of Soul Source dilators. Inspired by a design by @delecti_246185 . I got tired of the random plastic tray I was using to hold mine and wanted something a little nicer that also saved some space on…

Order a print of this model

Printables

Handle for the Chute clearing tool created by "kaje" as listed in the original source

I lost the original clearing tool for my snowblower and found the Chute Clearing Tool ver 2 by "kaje". It follows the same design concept and completes the set. The handle has a rough texture for better grip. I hope this is helpful to…

Order a print of this model

Printables

Flamecraft Player Resource Organizar

This is a player resource organizer for the board game "Flamecraft". It holds a players resources and cards in a compact, easy to use package. The slanted coin slots are easy to fill, count, and remove with just a thumb and forefinger.…

Order a print of this model

Printables

Resource and Coin Trays for Puerto Rico 1897 Special Edition for Table and Storage

I created this set of models to replace the stock vacuum molded tray that comes with the Deluxe Edition of Puerto Rico 1897 Special Edition published by Alea and Awaken Realms. It is comprised of a 'stack' of three parts (Coin Tray, Shim,…

Order a print of this model

Printables

Trays for Tainted Grail Upgraded Resources

These models provide storage and game-play trays to hold Upgraded Resources for the Tainted Grail board games. They are sized to allow for storage in the main game boxes (Fall of Avalon and Kings of Ruin) without other modifications (see…

Order a print of this model

Printables

TBS Source One V6 Camera Bumpers

Order a print of this model

Printables

Flick 19X With MODS! - A shooting toy pistol. Fully open-source (CAD file Included)

⚔ Flick 19X - Print-Friendly Toy Pistol ⚔ 📦 The Project Files: Inside the ZIP archive, you'll find: Pre-oriented STL files ready to print Assembly manuals in both English and Russian My OrcaSlicer settings for optimal printing Free…

Order a print of this model

Printables

Sourdough Core One

Prusa CORE One – Sourdough Proof Box (25 °C / 12 h) This G-code configures a Prusa CORE One as a controlled proofing chamber for sourdough and other long fermentations. It is designed to hold the printer enclosure at approximately 25 °C…

Order a print of this model

Printables

TBS source one v3 tail with SMA, GPS and XT60 mount

A combined mount for a GPS (TBS M8-2 size), SMA connector and a XT60 plug. Designed for the TBS source one v3 frame, intended to be used with Crossfire antenna mounts underneath (25mm standoffs) Printed in Sainsmart TPU

Order a print of this model

Printables

Drop & Run Cobalt 60 Source Cylinder

I like to use the cylinders to compare my filament with each other's colours and not have to print new test parts every time for colour combinations.

Order a print of this model

Printables

Granulate tray for Humydry moisture absorber (+ OpenSCAD source for customization)

This model replaces the original granulate tray for the Humydry moisture absorber in case you've lost it or something, it does not provide additional features. There seem to be different models, this one is suited for the 12cm x 12cm…

Order a print of this model

Printables

Otovent - Adult Autoinflation Device - Clinically Effective Treatment for Glue Ear (FUSION 360 Sources included)

Clinically effective, drug-free and non-surgical treatment for glue ear or otitis media with effusion Reduces the symptoms of glue ear by opening the eustachian tubes allowing the fluid associated with the condition to safely drain away…

Order a print of this model

Printables

Open Source Logo Shades

There are two copies of the arm, so you do not need to duplicate or mirror it. The Arms can be printed on the large flat side but if your layer adhesion is weak the holes can break. You can print the arms on the top thin edge, using a…

Order a print of this model

Printables

Improved magazine clip (rubber band powered) for "Flick 19X With MODS! - A shooting toy pistol. Fully open-source (CAD file Included)"

Thanks Many thanks to @myuto_675467 for not only making this design, but allowing this Labs category version of it that allows remixing. Original open-source CAD files are over there: Why this listing? The problem with the printed springs…

Order a print of this model

Printables

Resource tokens

To add these to a slicer, select a "coin" model, and a "resource" model at the same time, and import them as one object. Then in the object menu, change the resource model's type to modifier, and set it to a different color than the coin.…

Order a print of this model

Printables

Dig-Quad WLED Enclsoure

Features: Wife approval factor... many options I found didn't look good enough for the significant other to let it in the living room. This is more discrete. High voltage wiring is fully enclosed in separate section of the enclosure, thus…

Order a print of this model

Printables

Open-Source Hardware logo AD5X spool adapter

Order a print of this model

Printables

Eve Online: War for New Eden Vase Mode Resource Trays

Vase mode trays for holding War for New Eden resource tokens in the stock organizer. Two versions are available, a short version for storing both resource cards and plastic resource tokens, and a tall version for storing only tokens. Both…

Order a print of this model

Printables

Sci-Fi Gas Vent Resource

A Sci-Fi Gas Vent Resource for your tabletop RPGs and Wargames. This Gas Vent Resource measures 132mm x 125mm x 39.8mm and comes with a separate gas/steam cloud that can be added onto each of the vents if you like. There are multiple…

Order a print of this model

Printables

TBS_Source_One_V6 - WalkSnail Antenna Mount Single_with_Receiver_Antenna

For single Avatar VTX Antenna and RC Reciever such as ELRS module with antenna. mounts at the rear, slides over pillars

Order a print of this model

Printables

Parametric Snap-Apart Seed Trays (F3D + Open Source)

🌱 Parametric Snap-Apart Seed Trays (F3D + Open Source) Fully parametric seed trays designed specifically for 3D printing — clean, functional, and customizable. These trays print without supports* and feature perforated side walls so you…

Order a print of this model

Printables

Flamecraft Resource Token Bank

This is a resource token organizer for the board game "Flamecraft". It holds all 6 kinds of resource tokens plus the larger golden coins in a compact, easy to use package. The bottoms of each compartment are rounded so tokens are easy to…

Order a print of this model

Printables

IQOS Heets stick stand/shelf/box (with Openscad source)

Хранилище стиков для IQOS сделано по мотивам https://www.thingiverse.com/thing:4755166.Модель настраиваемая, есть исходный код для Openscad Две модели готовы для печати - для 10 пачек и для 5. The IQOS stick storage is based on…

Order a print of this model

Printables

Arme bumper for the frame source one v5

A bumper made for freestyle and bando. The triangle shape help to prevent damage of the arme and motor. Is heavy but solide. Print with 6 wall, 15 % infill at 0.2mm.

Order a print of this model

Printables

Macro Photography Slider - Open Source Project

Order a print of this model

Printables

RatPack Large US Sourced Filter Adapter

An adapter for the large Rat Pack filter assembly to the readily available Hunter 125x125x29mm charcoal HEPA filter. Hunter F1715HE5 True HEPA Replaceement Air Purifier Filter 2-Pack for Model HT1715

Order a print of this model

Printables

Harber freight Warrior forstner bit case source files

Model of forstner bits and a cutout case built in Fusion 360, fully parametrized, for use in other projects. This was initially designed as a variant of the rugged box case. The original Rugged Box (Parametric) license is highly…

Order a print of this model

Printables

Paraspool: Open Source Parametric Spool Adapters

There are a lot of great spool adapters on Makerworld. A LOT. Too many. To the point that I wondered why everyone has a model for “<this brand> spool adapter” and “<that brand> spool adapter." @PhilthePrinter has a great model for…

Order a print of this model

Printables

Sci-Fi Crystal Terrain / Resource

A Sci-Fi Crystal Terrain / Resource for your tabletop RPGs and Wargames. This Gas Vent Resource measures 98mm x 98mm x 99mm. There are multiple other sizes of Sci-Fi Crystal Terrain / Resources over on our Tribe this month. If you like…

Order a print of this model

Printables

Underwater Cities: Data Era Board Game Expansion Disk Resources

I didn't like the card board chits for the Data Era expansion for Underwater Cities, so I made these.

Order a print of this model

Printables

Silverling resources for the Castles of Burgundy board game

I love the game Castles of Burgundy by Stefan Feld, but I don't love the cardboard chits for the silverlings, so I decided to create these silverling resources. I printed out 16 to replace the 16 chits.

Order a print of this model

Printables

Worker Resources for Castles of Burgundy by Stefan Feld

Printed these upside down, so that the +/- symbol is better printed.

Order a print of this model

Printables

Cable Spool Holder Gridfinity - M3 Heat Inserts, Label, Press Fit Magnets, Thin/Wide Clamps, Cable Start Pinch (Source included)

Combination of several remixes made of the awesome Cable Spool Holder Gridfinity of @firstgizmo into one model. Plus some quality of life updates and fixes. Also STEP and Fusion 360 sources are included to make it easy for everyone to…

Order a print of this model

Printables

Hegemony resources box

4 of these replace the two resource boxes from this excellent Hegemony insert . My husband preferred to keep each resource separate, so he wanted 4 slots, not 3. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…

Order a print of this model

Printables

Open Source Sign

This is a flat 3D printable sign (badge / plaque) for open source enthusiasts who oppose the closed policies of big tech corporations. The design features: Crossed out logos of Apple, Google, and Microsoft (represented as generic…

Order a print of this model

Printables

Sourdough 3D scan

This was 3D scanned in York University Makerspace for a project in a grad class on Media Technology - I am looking at Sourdough as a Medium - and how it has gone through McLuhan's laws of Media. This was exploratory work with a 3D printer.

Order a print of this model

Printables

HGLRC M100-5883 GPS Mount – TBS Source One V6 (5")

GPS mount for HGLRC M100-5883 + Source One V6 Print in TPU. Use 0.2 mm layer height, 30% infill, tree supports ON, build plate only OFF, remove small overhangs OFF.

Order a print of this model

Printables

Cheese grater pane Fusion 360 parametric source

I've been obsessed with the cheese grater pattern and enjoyed the process of creating it using fusion 360. And it's fully parametric ! I'm happy to share the sources with you so you can tinker with it and use it in your projects. How to…

Order a print of this model

Printables

2dBi Rubber Duck Antenna (SMA) — Shapr3D Source Included

2dBi Rubber Duck Antenna A clean, print-ready 3D model of a standard 2dBi rubber duck antenna with an SMA connector and cable pigtail — the kind you'd see on WiFi routers, LoRa gateways, handheld radios, and IoT builds. Modeled from…

Order a print of this model

Printables

Mini Shelf in a shelf (shelf organser), Open Source, FreeCAD parametric

A parametric mini-shelf designed to be placed within existing shelving as an organizer. Features Fully Parametric: Easily customize the height, width, depth, and the number of shelves. Expandable Design: For widths exceeding your build…

Order a print of this model

Printables

Shoe Organizer (ultra-thin, opensource)

Introduction Despite having a reasonably sized shoe cabinet, family footwear often spills into the entryway. To solve this problem, I designed a shoe organizer that allows you to stack shoes vertically, effectively doubling your storage…

Order a print of this model

Printables

Wide Cable Spool Holder Gridfinity - M3 Heat Inserts, Label, Press Fit Magnets, Several Clamps, Cable Start Pinch (Source included)

Combination of some remixes made of the awesome Wide Cable Spool Holder Gridfinity of @firstgizmo into one model. Plus some quality of life updates and fixes. Also STEP and Fusion 360 sources are included to make it easy for everyone to…

Order a print of this model

Printables

Cozy Stickerville resource organizer

Simple resource organizer for the four resources in the game. Fits in the box

Order a print of this model

Printables

16mm/110 Film Carrier for Full Border DSLR Scanning + Riser Kit for CS-LITE Light Source

Remix of Evan Dorsky's 35mm holder modified to accept 16mm/110 format film. Gap reduced in Carrier Top and Carrier Base, and a plate added to the base to interface with the original riser. The following parts are unmodified from the…

Order a print of this model

Printables

MOSPAS - Modular Open Source Picatinny Attachment System

MOSPAS, short for Modular Open Source Picatinny Attachment System, is a free to use modular series of 3D models, meant for creating custom 3D printed attachments for a rail integration system (RAS) such as Picatinny or NATO rails. You may…

Order a print of this model

Printables

VRChat Name Tag + toggles + source

This is a complete 100% remake, but its from the idea https://makerworld.com/en/models/2536740-vrchat-name-tag and https://makerworld.com/en/models/459425-vrc-nameplate-hanger-tag This model includes a source code, and easy in the slicer…

Order a print of this model

Printables

TBS Source One practice rig camera mounts

Included are camera mounts set to 43° which will be used in some of our upcoming spec races. I run the foxeer predator nano with a 1.7 lens or a digisight nano camera. I also have a Session mount and a mount for Hero 5,6, and 7 cameras.

Order a print of this model

Printables

Everdell Player Resource Tray

A small token and worker tray for the Everdell board game. It sits nicely against the main board and has a spot for all the workers at the back. I use the right side for point tokens. Due to the varying curves of the board, I made two…

Order a print of this model

Printables

OSWW - The Open Source Watch Winder

The Open Source Watch Winder (OSWW) is an open source high quality, modular, watch winder. For $40*, you can build yourself a 3 watch, watch winder, with user-replaceable parts. Key Features Quiet belt drive Bi-directional winding; winds…

Order a print of this model

Printables

SVG2PLATE.scad : How to Make Multicolor Plates Using Open Source Software (SVG to STL converter with openSCAD)

Create awesome art panels using this (very simple) openSCAD script and your favorite SVG editor. Using an online SVG to STL converters are inaccurate, produce geometry errors and exposes your files. Converting by the slicer is very buggy.…

Order a print of this model

Printables

Flesh and Blood (FaB) Resource Token

FaB resource token to indicate the remaining points from pitched cards.

Order a print of this model

Printables

Everdell ressources container lid

When transporting the box, the many small parts fell out of the otherwise very nice container designed by @Fabmaszter. That's why I designed this lid. I took the dimensions and designed the lid so that it is flush with the inlay. It sits…

Order a print of this model

Printables

SUMO Enclosure by 3D SOURCERER | Made for Prusa XL

IF YOU ARE ENCLOSING A PRUSA XL PURCHASED BEFORE JUNE 1, 2024 AND YOU ARE PLANNING TO PRINT WITH HIGH-TEMPERATURE MATERIALS, PLEASE FOLLOW THE INSTRUCTIONS OUTLINED VIA THE LINK BELOW CLICK HERE FOR PRUSA XL ENCLOSURE PREPARATION THERE…

Order a print of this model

Printables

Feet for: OSWW - The Open Source Watch Winder

Smaller one clips over the mounting dowel. Larger one goes on the mounting dowel sleeve. Print on the side out of TPU. Print two of each. I printed with .2mm and 25% infill. Support isn't necessary.

Order a print of this model

Printables

5x12 Resource Cubes Holder Grid

5x12 grid cube holder for board games resource cubes 8x8 mm.

Order a print of this model

Printables

Garry's Mod Error / Source Missing Model

Modeled and printed this as a gift for one of my best friends who I met through Garrys Mod many years ago. I wasn't a fan of how the existing models on Printables and Thingiverse connected the letters together; this one has a slight…

Order a print of this model

Printables

TD-1 Case for Self-Source and "PCB Kit" by AJAX-3D (Individual STLs)

EDIT 7/19/2024: Some have commented about the difficulty disassembling the top from the bottom. A User suggested simply CUTTING OFF the nubs, which also seems to work well. This works really well! EDIT 7/17/2024: From AJAX: Made the…

Order a print of this model

Printables

CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5

CaddxFPV Walksnail Moonlight VTX Mount for TBS Source One V5 Made possible with @Dtuned_2160698 Features: Full protection of the Moonlight Support dual antennae setup Cutouts for port access Slit and zip tie step for easy and flexible…

Order a print of this model

Printables

Immortal T V2 for TBS Source One LR side mount

Immortal T mount for TBS Source One V3 Frame with locking mechanism that secure the mount from rotating on standoff. It's made for V2 Immortal T antenna.

Order a print of this model

Printables

Game-easy - Card and Resource/Token holder

New version - V2 and V3 - slanted card slot on one side. V2 and V3 have a 1mm different in the slot width. Simple to print card holder with token/resource trays. Designed for a modern printer bed, these are approx. 20cm x 6cm x 1cm in…

Order a print of this model

Printables

Game-easy - DUAL LAYER Card and Resource/Token holder

Dual level card holder based on my single level design Simple to print card holder with token/resource trays. Designed for a modern printer bed, these are approx. 20cm x 6cm x 1cm in size so multiples can be printed on a single bed. Easy…

Order a print of this model