P
PrintablesJuke11
SPAMTON G. SPAMTON
HEY EVERY !! IT ' S ME!!! EV3RY BUDDY ' S FAVORITE [[Number 1 Rated Salesman 1997]] Spamton G. Spamton!!
- Downloads
- 666
- Likes
- 77
- Rating
- 4.86
Search results: spam
58 models
P
PrintablesSome_Guy
Musubi Press (SPAM, egg/tamago, etc...)
This is a basic musubi press that I modeled up to become better at FreeCAD and to make some musubi. I've included both printable stl files and the original FreeCAD files if you want to make some modifications to the press. The Kanji for…
- Downloads
- 623
- Likes
- 54
- Rating
- 5
P
Printablesanonymous
Dummy 13 Fortnite Weapons Pack #4: "dang spammers"
Dummy 13 Fortnite smgs Print with supports. photos are coming when I print Enjoy:)
- Downloads
- 415
- Likes
- 54
- Rating
- 0
P
PrintablesDonkey Jon
Spam musubi press
Press for musubi. chamfered the handle so it doesn't need supports.
- Downloads
- 324
- Likes
- 20
- Rating
- 5
P
Printablesshoelesshistorian
Super Spamf Folding Stock
Super Spamf folding stock. You'll need the original Spamf kit, the Super Spamf kit, and then Telcon's top rail set. One of the rear pieces for the top rail kit is replaced by the adapter piece here- default, it folds to the left. Mirror…
- Downloads
- 160
- Likes
- 50
- Rating
- 4.25
P
PrintablesBrianchenito
"SPAM" Airsoft Non-Suppressing Muzzle Device
An airsoft muzzle device that covers up and protects either a barrel extension or a tracer unit. Does not reduce sound in any way, cannot be threaded onto real firearms, and is entirely dog friendly. Does not filter oil. Will, however,…
- Downloads
- 138
- Likes
- 43
- Rating
- 5
P
Printablesracerethan
Printed M3 Hex Standoffs For SPAMF
Printed 20mm and 12mm hex standoffs for the SPAMF homemade nerf blaster. I have not physically printed this yet, but I have used the same M3 hole dimension as my metric printed standoffs for the caliburn. I think it should be fine. I also…
- Downloads
- 126
- Likes
- 19
- Rating
- 0
P
Printablesbyron44
Holy Grail - Monty Python Spamalot
Designed from scratch to match the original film poster as best as possible but also to print without the need for support and to be efficient with filament usage. Made for a production of Spamalot but also a must for fans of Monty Python…
- Downloads
- 124
- Likes
- 23
- Rating
- 0
P
PrintablesTarpie_
SPAMF Paddle Magazine Release
I have always found the mag release of the SPAMF a bit awkward to reach with my thumb. I like paddle releases so I modified it a bit. I have made a version that has the original release part still intact, and one where i removed it. Not…
- Downloads
- 123
- Likes
- 22
- Rating
- 4.83
P
PrintablesT-MAN
SPAMF M3 STANDOFFS
Multiple other designers have tried these but I really wanted to make some that are tested and have pictures. I tried some on thingiverse but those were too tight so I just took caliper measurements and designed these directly off of the…
- Downloads
- 123
- Likes
- 35
- Rating
- 5
P
PrintablesDELTA 13 [deltarune figures]
SPAMTON G SPAMTON | DELTA 13
You can use the model however you like, as long as you give me credit.
- Downloads
- 114
- Likes
- 13
- Rating
- 5
P
PrintablesDELTA 13 [deltarune figures]
SPAMTON NEO | DELTA 13
You can use the template however you like, as long as you give me credit.
- Downloads
- 110
- Likes
- 7
- Rating
- 5
P
PrintablesMitch Bukowski
Spam Musubi Rice Press
I have been feeling nostalgic for my time in Japan, missing my nightly runs to Family Mart and 7Eleven. To counteract the crippling sadness I feel for leaving such a beautiful country, I decided to make this press to recreate one of the…
- Downloads
- 104
- Likes
- 14
- Rating
- 0
P
PrintablesAngry Potato
SPAMF Skinny Breech
Won't match the metal vanguard breech in performance, but should be a slight improvement over the original printed part, and of course allows for loading in mags when the breech is closed.
- Downloads
- 98
- Likes
- 16
- Rating
- 5
P
PrintablesRedCowl
Super SPAMF Barrel Collet
For this, you will need to have a Super SPAMF frontend, and this can work with the stock SPAMF barrel (about 4in) or any length you choose. To use the stock length barrel you will need the “Standard Length Collet“ file or the “Standard…
- Downloads
- 92
- Likes
- 22
- Rating
- 5
P
PrintablesToukejin
SPAMF Reverse Angled Talon Magwell
Posted with the permission of GavinFuzzy. This replaces the standard SPAMF magwell and magazine releases. Side-plates attach with two 4-40 screws each and the release is tensioned with a short length of elastic. Basically I started with…
- Downloads
- 91
- Likes
- 23
- Rating
- 5
P
Printableslaurent vdb
Spam musubi mold
Fill the mold and press down with the other part. You'll have a piece af spam musubi every 10 seconds!
- Downloads
- 82
- Likes
- 12
- Rating
- 0
P
PrintablesDvZ_Prints
Smoothed SPAMF / Falconfire Grip Scales
Herbmeister Created an excellent model for the falconfire grip scales, especially noteworthy is its breakaway support and printability features. Also big Thumbs up for Providing .step files. The fit was almost perfect for me and i only…
- Downloads
- 80
- Likes
- 16
- Rating
- 0
P
PrintablesKitsuname
Cooler SPAMF - A picatinny foregrip for the Super SPAMF
I designed this model because I got tired of using my stock Super SPAMF foregrip, but didn't like the aesthetics of the Super Special SPAMF foregrip. This serves the same purpose, but doesn't compromise the aesthetics of the design of the…
- Downloads
- 76
- Likes
- 20
- Rating
- 5
P
PrintablesJoe Printable
SPAM Can Divider
Hey I ate the yummy SPAM, and now what do I do with the cool can it came in?!? Here's a handy SPAM can divider to organize your stuff. Two versions have been included. A 4 section divider as pictured, and one that just includes the outer…
- Downloads
- 74
- Likes
- 8
- Rating
- 5
P
PrintablesHanabata
Spam Musubi maker
I printed it with PLA and 100% infill to give it strength to smash down the rice. Depending on your first layer, you may need to sand off the edges to make it slide easily.
- Downloads
- 70
- Likes
- 6
- Rating
- 0
P
PrintablesEccentriclulz
Semi-Super SPAMF Grips
Un-pump grip your pump grip SPAMF. Installs using existing hardware. Print as imported, no supports needed. Optionally add two strips of grip tape for more grip!
- Downloads
- 58
- Likes
- 19
- Rating
- 0
P
PrintablesGalactic_Felix
Spammy '97
Dummy 13 but it kinda looks like spamton
- Downloads
- 57
- Likes
- 10
- Rating
- 0
P
Printableskaje
SPAM Can Divider - Remix
SPAM cans have an interesting shape that just beg to be used for something once the SPAM is gone. Note : I also made a “stand” for the can to make it more stable - see the link below :…
- Downloads
- 50
- Likes
- 5
- Rating
- 0
P
PrintablesEccentriclulz
SPAMF Printed Standoffs for 3M Bolt
12mm and 20mm 3m through bolt standoffs for use in the SPAMF. Two of each is required. Sand to fit as needed. Recommended to print all 4 upright on a raft simultaneously.
- Downloads
- 47
- Likes
- 5
- Rating
- 0
P
PrintablesSFL_GinKz
Custom Super SPAMF Grip
Designed to be used with the Super SPAMF's Barrel_Super_2PC_Main & Barrel_Super_2PC_Tip_Compensated. Printed @ 0.20mm w/Barrel face down. Supports are optional as the lower portion of the grip was sanded down. Uses 12mm Nerf screws, and…
- Downloads
- 45
- Likes
- 8
- Rating
- 0
P
Printablesamango
Spam Yahtzee Sliding Lid
Just a simple slide-on lid for the Spam Yahtzee game, since ours didn't seem to come with one. The inner dimensions slide on perfectly, but I could have made the box a bit longer to extend an even dimension across the top. Maybe in the…
- Downloads
- 40
- Likes
- 4
- Rating
- 0
P
PrintablesSorrowspark
Another Super SPAMF Custom Grip and Frontend/Sight
Custom grip, requires 1 toy screw to retain the grip to the front grip keeper
- Downloads
- 39
- Likes
- 6
- Rating
- 5
P
PrintablesEvan Showalter
Spami (Slide Prime Action Mag Fed Ionfire)
BEWARE!! This is not very good, and lots of parts require heavy post modification and don't fit very well. Most everything it super glued in place Spami like the SPAMF but for the ionfire Fits Angled Talon Mags Non Printed Parts: Random…
- Downloads
- 33
- Likes
- 19
- Rating
- 0
P
Printableskaje
SPAM Can Stand! Two Versions!
Wondering what to do with that nifty can that is left over after you eat the SPAM? It looks like it would be useful for holding stuff like pens, pencils, markers, or whatever, but the base is a little too narrow to be stable. This "SPAM…
- Downloads
- 33
- Likes
- 1
- Rating
- 0
P
PrintablesCodeFuPanda
SPAM Lid Penny Drop
Penny (coin) Drop remix of Spam Yahtzee Sliding Lid by @amango_240854 . Save print time, filament, and spare change. Turn an old SPAM can into a Penny (coin) drop game. Takes just about 3.5 hours to print, and uses about 21g of filament.…
- Downloads
- 29
- Likes
- 2
- Rating
- 0
P
PrintablesSnowRat
Spamf SillyCollet
Sillycollet front ends for your spamf! Works with standard 16mm OD barrels and whatever silly collet you like!
- Downloads
- 28
- Likes
- 14
- Rating
- 0
P
PrintablesICBB
The Official SPAM Museum SPAM Star
I created the original SPAM star as a Christmas neighbor gift gag. After sharing with my manager, he requested one for his friend who works for Hormel and then he asked for another to send to the SPAM Museum. Designed to fit an actual…
- Downloads
- 23
- Likes
- 11
- Rating
- 0
P
PrintablesBike Cyclist
Search Engine Spam Awareness Coaster
Search Engine Spam Awareness Coaster I love these contests, but I fear they will spam the Printables Search Engine with so many search terms that only describe coaster motifs to make it virtually useless. (Replace “coaster” with the flash…
- Downloads
- 22
- Likes
- 5
- Rating
- 0
P
Printables3DZeBlate
Wingspam Organiser
I create this models to have storing and dice tower at the good side to be placed in the box of the game. No supports needed. I printed everything in WoodFill in 200 microns and 0.6 nozzle
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesDerpy Nate
Nerf Falconfire/SPAMF Plunger
I broke a plunger on my SPAMFed Falconfire, due to having too high of a springload, so I designed a replacement. It comes in two parts- the plunger, and the cushion, but only the plunger itself is required to function. The plunger should…
- Downloads
- 19
- Likes
- 4
- Rating
- 0
P
PrintablesKN16
Spam Printables Badge
I saw a bunch of Printables badges so I was inspired to create one. You can earn this by posting hundreds of inane corporate logos.
- Downloads
- 19
- Likes
- 10
- Rating
- 0
P
PrintablesAnimantur
Spamf Crown Muzzle
A muzzle i designed for the spamf with the shortened barrel by Eric1218 on Thingiverse: https://www.thingiverse.com/thing:5132605 This model does not require a brim or supports and is best printed at a 0.15 mm layer height. I have…
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
PrintablesKNUncle
Super SPAMF Compatible Geometry Priming Slide V1
I reverse designed a priming slide for the Super SPAMF based on the geometry of the priming bars and the SPAMF breech. With this piece and a few others you can find floating around the Internet, you will be able to build a Super SPAMF…
- Downloads
- 17
- Likes
- 5
- Rating
- 0
P
Printablesrallekralle
Epi 32U4 demonstration SPAM can
Little demo of the Epi 32U4 Arduino-compatible board as a USB input device
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesDerpy Nate
Super Special Spamf Shotgun-Style Pump Grip
I love the Super Special SPAMF by DetroitDartworks, which is based on the Super SPAMF by OldFusionDesigns, which is based on the SPAMF by Gavinfuzzy, which is an overhaul modification to the Nerf Falconfire in and of itself. I already…
- Downloads
- 16
- Likes
- 8
- Rating
- 0
P
PrintablesICBB
Christmas Tree Spam Star
*I'd recommend you check out my SPAM Star 2.0 in addition to this model. I personally see it as an improvement over this one. The Official SPAM Museum SPAM Star by ICBB | Download free STL model | Printables.com For your SPAM loving…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesXYZ maker
turbospam control 3d
coche del turbospam de Cesar Galera (control 3d)
- Downloads
- 15
- Likes
- 9
- Rating
- 0
P
PrintablesToukejin
FLAK Stock Adapter for SPAMF (Falconfire)
It's a little bracket that clamps onto the bottom of the Falconfire handle (beneath the grip scales) and has a slot for u-channel aluminum like on the FLAK stock. The grips I modified are not mine to share, so I'm not sure how useful this…
- Downloads
- 15
- Likes
- 8
- Rating
- 0
P
PrintablesYetiEngineering
SPAMF ex BCAR Muzzle
Allows you to connect ex bcars to the front of the spamf without needing a longer barrel, doesnt make it ugly when no bcar installed I recommend using a file or sandpaper on the inside of the bcar or last 15mm of barrel tip depending on…
- Downloads
- 14
- Likes
- 5
- Rating
- 0
P
Printablesmike hawk
Spamton headphones
Note that these probably wont work with whatever headphones you have, as they were designed for a random pair logitech headset i had lying around.
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
PrintablesBoostnboogie
spam musubi jibitz
spam musubi jibitz, print face down and and fuzzy skin to outer walls.
- Downloads
- 5
- Likes
- 7
- Rating
- 0
P
Printablessaltysparkles
Spamton Earrings (Deltarune)
LIGHT neR, ISN'T THIS EARS JUST [Heaven]LY? ATTACH YOUR [[Silly Strings]] AND [[Hyperlink Blocked]]. WHY DON'T YOU [[Show it off?]] HAEAHAEAHAEAHAEAH!! Earrings inspired by the character Spamton from the game Deltarune, complete with…
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
PrintablesJtaylor254
spamton's reupload of a spinnig top
spamton g spamton's re upload of a model
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
SPAMTON G SPAMTON | DELTA 13
You can use the model however you like, as long as you give me credit.
P
Printables
SPAMTON NEO | DELTA 13
You can use the template however you like, as long as you give me credit.
P
Printables
Nerf SPAMF Holster v2 (right leg)
Version 2 of my holster for the SPAMF. Uses velcro from velcro bundles in addition to straps that come from traditional holsters. I have not printed this myself yet, but it should work. I based it off of my older design. I use this…
