Counting matching models…
ASTM Standard Tensile Test Specimen Type I with 3.2mm thickness as defined by ASTM International's publication D638 (Standard Test Method for Tensile Properties of Plastics) version 14
Model of 1A tensile test specimens according to ISO 527-2 standard.
Made by ftc team fusion 18142
I needed a container like the fish store uses that can hang on the side of my tank. This will be useful for acclimating new fish as well as a place to hold fish while performing certain tanks maintenance tasks.
Need a stand for your sphere or mineral specimen? Try these! The sphere stands are in two sizes. Small is good for spheres up to about 2" diameter. For 2" or larger, go for the medium. The specimen stand is modeled after a carved wooden…
The attached STL file provides tensile test specimens conforming to ISO 527-2 standards, specifically Types 1A, 1B, 1BA, 1BB, 5A, and 5B. These specimens are essential for determining the tensile properties of plastics. The dimensions are…
Pollen grains from the 3D Printed Pollen Project by Oliver Wilson. https://3dpollenproject.wixsite.com/main I removed the species names on the files so that they are not identifiable by the file name. This way students who are looking at…
Here is the model for my Fairy Specimen a suitably gruesome addition to your Halloween Decorations. i printed the skeleton in a bone colour PLA lay on its back with a little organic support, then printed the wings flat on the bed in some…
Made by FTC 25016 screws in to 1908 series servo hub by goBILDA Holes are threaded, but you may want to add nuts.
Suitable samples for my tensile test . These can be printed standing or lying to determine the tensile strength in Z - or XY-direction as a measure for the strength of the material itself and layer adhesion. Here you can see it in action:…
Also Check out https://www.printables.com/model/1043084-gobilda-ftc-battery-mount-no-numbername For all Tetrix style batteries Print with supports and scale to 100.1 % With its lightweight construction and optimized grip strength, this…
Simple gripper for samples and specimens. Uses a single tetrix servo and can be mounted to tetrix channel.
The alligator clip adaptor fits Coder-tronc's fantastic Ball and Socket set . A set of arms and joints that enable flexible and secure placement. In addition, I've created a set of photography fixings that fit the same set 1/4 inch…
This is an ISO527-1A test specimen for determining stress/strain characteristics of plastics through a tensile test. Materials to be tested and updated are: Prusament PLA Prusament PETG HIPS Prusament ASA TPU Prusament PC Blend Prusament…
Uses print-in-place springs to keep tension on the rotating parts. Fill the hole in the wheel with some kind of clay and stick your pins in there. You may have to adjust the size of the rotating cylinders until it's smooth. Grease might…
A hardness specimen that is able to be used with the ASTM D2240 Hardness testing standard with a Shore D Durometer.
This is a unique take on handling specimens in the 2024-2025 FTC game Into The Deep. This took many iterations and many fails. I would love for others to use this design and iterate upon it themselves. It was printed in PLA with a couple…
Just some sticks for the radiomaster boxer. If printed in resin, they feel great and highly customizable !
This is an artwork made using HueForge, which realistically presents butterfly specimens. Suitable for this 150x150mm frame. https://www.printables.com/model/643762-frame-150x150-for-hueforge-and-other-150mm-artwork This artwork requires…
Different specimens for material testing. Details to follow soon.
This is the 10th version of the insect specimen holder me and my colleagues are working on. It needs one of each part to work, they are already scaled and need a precise and calibrated printer so they do not break. Settings: Filament: PLA…
Zugproben angelehnt an DIN EN ISO 527-2 von 2012. Die Probengeometrie ist nach Norm für Spritzgussproben modelliert, die Dicke der Proben wurde von 4mm auf 9mm erhöht um den Einfluss des Infills besser testen zu können. Wichtig ist die…
Prüfkörper nach ISO 3167:2014(E), Typ "A"
Foolproof assembly. Prints out of 3 identical pieces. I have made them in 15 different shapes and sizes. Scale up and down if needed. The pieces snap together, and the final assembly is surprisingly strong. Printing…
Simple blood sample container with threaded lid and inner insert . Can be used for shipping of blood/urine or as a sample storage. Lid have useful information that samples are inside 1 cu will hold 6 BD vacutainer vials or similars Cup…
This is a 3D fractal sculpture. Although it was created using some fairly simple math, it has a distinctly organic look and feel. In your mind's eye it could be an alien fossil discovered while trekking on a distant world, a curious…
These specimens adhere to ISO 527 standards but are uniquely designed for torsional analysis, allowing rotation around their longitudinal axis. Ideal for precise assessment of material properties under torsional stress, these models…
In the photos, you can see a print made with ASA filament at a bed temperature of 100 °C and 110 °C.
Specimen for mechanical testing in a hounsfield tester
This is a TPU compliant claw by team 16028 Mecha Knights. It is meant for grabbing specimens from the field wall and placing on the bar. It's supper simple, just needs to be added to a lift. We have gotten some very fast cycle times by…
Madagascan sunset moth ( Chrysiridia rhipheus ) drawn as geometric line art. Day-flying and iridescent in life, reduced here to a scalloped, many-tailed hindwing — the silhouette that survives as line work. The facet web follows the real…
Print: Printer: Anycubic Mega X Resolution: 0.1 mm Support: yes Material: PLA, Infill: 100% ____________________________________________________________________________________________________________ Druck: Drucker: Anycubic Mega X…
Io moth ( Automeris io ) drawn as geometric line art, built around the two oversized hindwing eyespots the species is known for. The facet web follows the real wing venation, kept deliberately sparse on the hindwings so the eyes stay the…
This is just the same but works with the rev robotics extrusion.
The "group" files (pct) originate from my bachelor's thesis and exclude 35%, 45%, 55%, and 65% (we decided in initial testing that we could skip these). They also exclude Support Cubic, as there is no difference between it and the…
Cecropia moth ( Hyalophora cecropia ), North America’s largest moth, drawn as geometric line art. The facet web follows the real wing venation, and a crescent moon sits on every wing — the mark the species is known for. One piece. Prints…
Specimen holder for polishing of standard specimens used at KMAT FJFI ČVUT. No special settings needed, printed on Prusa mini with PLA without any problems.
Luna moth ( Actias luna ) drawn as geometric line art. The facet web follows the real wing venation, and the hindwing tails keep the inner notch the species actually has — they do not taper to a point. One piece. Prints flat. No supports.…
Osteosarcoma of the Distal Femur — 3D Anatomical Specimen Aicha Laina Costa Dias — Lead author. Medical student, Federal University of Paraná (UFPR), Brazil. Digitization and 3D processing. Edmar Stieven Filho, MD, MSc, PhD — Supervisor.…
Osteosarcoma of the Distal Femur (Case II) — 3D Anatomical Specimen Aicha Laina Costa Dias — Lead author. Medical student, Federal University of Paraná (UFPR), Brazil. Digitization and 3D processing. Edmar Stieven Filho, MD, MSc, PhD —…
Hummingbird hawkmoth ( Macroglossum stellatarum ) drawn as geometric line art, caught mid-hover. Wings swept up, abdomen flared into its tail brush. The facet web follows the real wing venation, so the geometry reads as anatomy rather…
A unique 3D printable creation — this Alien Skull Specimen Display Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
Comet moth ( Argema mittrei ), the Madagascan moon moth, drawn as geometric line art. The facet web follows the real wing venation. Falcate, pointed forewings and swept ribbon tails — the longest of any moth — keep it clearly apart from…
Chondrosarcoma of the Pelvis — 3D Anatomical Specimen Aicha Laina Costa Dias — Lead author. Medical student, Federal University of Paraná (UFPR), Brazil. Digitization and 3D processing. Edmar Stieven Filho, MD, MSc, PhD — Supervisor.…
Chondrosarcoma of the Proximal Femur — 3D Anatomical Specimen Aicha Laina Costa Dias — Lead author. Medical student, Federal University of Paraná (UFPR), Brazil. Digitization and 3D processing. Edmar Stieven Filho, MD, MSc, PhD —…
Chondrosarcoma of the Scapula — 3D Anatomical Specimen Aicha Laina Costa Dias — Lead author. Medical student, Federal University of Paraná (UFPR), Brazil. Digitization and 3D processing. Edmar Stieven Filho, MD, MSc, PhD — Supervisor.…
Sclerotic Osteosarcoma of the Distal Femur — 3D Anatomical Specimen Aicha Laina Costa Dias — Lead author. Medical student, Federal University of Paraná (UFPR), Brazil. Digitization and 3D processing. Edmar Stieven Filho, MD, MSc, PhD —…
A 6 × 3 jar holder for 17 mm jars is a compact, grid‑style organizer designed to securely store small cylindrical containers—often used for spices, hardware, craft supplies, or lab samples.
Chondrosarcoma of the Proximal Humerus — 3D Anatomical Specimen Aicha Laina Costa Dias — Lead author. Medical student, Federal University of Paraná (UFPR), Brazil. Digitization and 3D processing. Edmar Stieven Filho, MD, MSc, PhD —…
Osteosarcoma of the Proximal Humerus with Pathological Fracture — 3D Anatomical Specimen Aicha Laina Costa Dias — Lead author. Medical student, Federal University of Paraná (UFPR), Brazil. Digitization and 3D processing. Edmar Stieven…
Osteosarcoma of the Distal Femur with Codman Triangle — 3D Anatomical Specimen Aicha Laina Costa Dias — Lead author. Medical student, Federal University of Paraná (UFPR), Brazil. Digitization and 3D processing. Edmar Stieven Filho, MD,…
Tensile Test Specimen Display Stand / Engineering Student Trophy A compact, 3D-printed desk stand designed to hold a cylindrical metal specimen after a tensile strength test. Features two notched cradles for stable horizontal display and…
This is just the same but works with the rev robotics extrusion.
This is the 10th version of the insect specimen holder me and my colleagues are working on. It needs one of each part to work, they are already scaled and need a precise and calibrated printer so they do not break. Settings: Filament: PLA…
A unique 3D printable creation — this Alien Skull Specimen Display Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
Zugproben angelehnt an DIN EN ISO 527-2 von 2012. Die Probengeometrie ist nach Norm für Spritzgussproben modelliert, die Dicke der Proben wurde von 4mm auf 9mm erhöht um den Einfluss des Infills besser testen zu können. Wichtig ist die…
