132 models
************************ UPDATE 7th February 2023 ************************ Due to requests from some people who have made the Awesome Bee Feeder I have now updated the design to have the bottle holder and base plate combined as one item.…
This is an addition to the 'Prusa Steel Sheet Holder 2er, 3er and 4er' to improve stability. Problem: the surface area of the 2 slot version of the sheet holder is small and the sheets are tall, this causes the holder to fall on the side…
2d image extruded and remeshed of a cat holding a knife with the text "i have Stability - the ability to stab" to be printed in 2 colors bambulab AMS version bambulab NO AMS with Preprogramed pause for manual filamet swap at layer 15…
Big shoutout to Oddworks for this amazing model! I remixed the God of War Leviathan Axe originally created by Oddworks and further remixed by SlurpeeMachine. Both creations have been improved for increased stability. It's important to…
I created a Remix, because the original have a possible breaking points. Two of 4 "Legs" for the Controller on the Top broked on the first usage. So I rounded some corners for a better stability, now it works fine for me! Thanks for the…
Designed to be printed BIG. When I was a boy I wanted big army men, and they didn't make any. The full size G.I. Joes were far too expensive for this poor boy. It's now the future and I can ensure my nephew has huge, giant army men to…
This add-on improves the filament retraction of the spool in Creality CFS, by eliminating the friction between the factory bumpers and the spool, which can become problematic as spools get lighter with less filament on them. Also no more…
Extended Stability Feet to connect 2 Prusa Steel Sheet Holder and / or Prusa MINI Steel Sheet Holder based on Angelo's model
I liked the design from the original model, but the mesh was poor resulting in an unattractive print. Found the original image online, and remade the extruded version from scratch using the image as a canvas. Included a version similar to…
also got this idea from https://www.printables.com/@Leo_1098206. i however don't have or can't find a 2.5kg spool which his what his particular remix is for. 5mm countersunk screws should fit fine.
My parents wanted drink holders for their SUP, paddle boards. But the strings on them was not very tight and on one of them you couldnt really adjust the tightnes. So I made them drink holders with extra stands for that extra stability…
I liked the idea of the "Stability Feet for Prusa Sheet Holder", but I wanted to screw the feet into the top of my enclosure. It makes the Sheet Holder removable but the whole thing is much more steady since it is mounted into the top of…
Made some bigger/modified pegs for more stability for the battery holder, for more stability.
A remix of https://www.prusaprinters.org/de/prints/42868 by Radmaster and https://www.prusaprinters.org/de/prints/41894 by Zelrick This is a mix as two pieces that i like on my Prusa Mini ;-) The pieces have the same position and cant use…
I personally found that the high mounting point of the official Biqu mount resulted in a fair amount of flex, causing layer shift on the y-axis, inconsistent prints, and the extruder head to occasionally hit the model during travel moves.…
This is my take on a tiny whoop canopy designed to accommodate the Flywoo O4 Wide camera. This is currently being used by FPV Manitoba ( https://www.instagram.com/fpvmanitoba/ ) for tiny whoop commercial shoots. It’s a derivative of my…
I printed with a 0.6 mm nozzle, so the text at the bottom is a bit harder to read than if I'd used a 0.4 mm nozzle. I also sized it up about 50% for printing.
This battery cover mod enhances the stability of the Futaba T10PX transmitter. Designed to replace the stock battery cover, which can cause the T10PX to tip over easily, this mod adds balance and prevents falls, making your transmitter…
This design is made specifically for a 1:43 scale model of an F1 car from Burago. The bottom of the stand is open for ease of assembly (1 screw) and makes it look like the F1 model is floating. I recommend printing in the orientation as…
The original feet fall off if you raise the sheet-holder. I added snaphooks to avoid this. Now they stay at the sheet-holder without use of glue. Works for 3x sheet-holder. I used PLA, but i am sure it also works with PETG. Fits perfect…
The model is easy to print without support. The orientation of the model is already the right one. The only model I could find could not be printed without supports. I printed it in ABS with a 0.4mm nozzle and 0.2mm layer height. You need…
Remix of this gameboy color stand https://www.printables.com/model/455808-gameboy-color-display-stand/files I found my gameboy sliding out of it too often when sitting on my desk so I added a lip and shortened the footprint to fit better…
This is a 3D printed handle for the 3DMakerpro Moose 3D Scanner. *For this print you will additionally need: 1x O-Ring 10mm Outer Diameter 4mm Inner Diameter 3mm Height 3x Ruber feet 10mm Diameter 2mm Height When using the Moose scanner…
Remixed from the Audio Cassette Winder from Ozmale. Changes: Increased the Base size to cover the full length of a cassette, and added a Frame to hold the cassette. Now when you hold it you hold the cassette firm to the winder. Seperate…
. Vertical Piece Dimensions : Height: 210 mm Width: 110 mm Depth: 6 mm Perfect for displaying and protecting your favorite frames with added stability and style!
This is a precompiled G-code file designed for motion stability testing on Elegoo Neptune 4 /Pro/ Plus / Max printers. There is no need to slice anything — simply copy the appropriate file to your printer’s SD card and run it directly. 🔧…
Fits 86mm foam cannon bottle. Resize if your bottle is a different size. Check my profile for other foam cannon accessories.
Print 2x Print resolution: 0,15 Supports: no material: pla Don't forget add photo
I printed and used the original, but when supporting a Google WiFi base station it ended up bending a little after several months. I made the support area larger to compensate. In the original, the position of the side support mixed with…
This is a small simple piece that attaches to the Festool FS-WA (or TSO Square) so it can stand on the cut material. It eases the handling of the track in my opinion. Requires a M6 knob to be secured to the square.
I was worried about tower stability with the original gear base from Wick3D's Rotating Hydroponic Tower so i updated the original base gear model to extend further past the reservoir base. I would have liked to add some type of locking…
Update 5 Jun 23: Added a new base foot with pin, so that there is no need to print the pin separately. However, fitment might be an issue for some printers, do a test print before mass printing. ***** I love this simple modular design by…
Description A remix of a remix of a remix! These stability feet are for those looking to join the four (4) sheet MK3 holder by iFreyz with the three (3) sheet Mini holder by Yoji. Yoji already designed some extended feet but those only…
A remix of simon_vance's Pop Socket Clip with an added layer of stability on the bottom. Stick your phone literally anywhere with this and some vhb tape! Apologies for no photos, I made this edit several years ago and all of my prints of…
This is yet another remix of the marvellously minimalist Spool Holder by filamentry but with a stability\mounting tab added. You will still need 2 bearings per assembly. I purchased mine here:…
A 50.5mm x 50.5mm input square for shaky Lack Legs with a disc (10cm diameter) whose surface area probably helps with stability. Mostly, I used this quick thing to boost up a leg that wasn't given enough turns before permanently…
The first thing that broke was the connection between ,,handle" and ,,Upper" part, so I combined it directly. Now the stability is improved and also the look. A must-have if you use the Mods.
I improved design based on the original. For me it was way too much flimsy, so I made improvements based on the original design. Printed with Ultramarine Blue PETG. 15% Infill 4 walls No supports
I like the minimalist design, but my Xiaomi redmi note 5 with a silicone case in portrait mode is too heavy (it overturns). So I modified the model and now it has better stability even for heavier smartphones.
This is a simple holder for fishing bait jars such as Gulp, PowerBait, Shoepeg corn, etc. Designed to clip onto the fore-transom (not sure if that's a real thing) and places them out of the cockpit and out of the way, but very handy and…
I've cut off the IKEA LACK legs to 10,5cm and have inserted these feet at the bottom of the legs. My printer might have been a bit out-of-sync when printing so the dimensions might have to be adjusted a bit. If you print it and it doesn't…
I made my Ikea Lack enclosure 3 Lacks tall. It means less bending to work with my printer, but it also allows for a lot of wobble. The enclosure sits in front of a stove mantle in our garage so I made a mounting bracket that could clamp…
Building the MPCNC Primo you typically get the effect, that the truck pipes (steel pipes on which the core is running on) are not exactly orthogonal to each other. Very often you get an angle of 89° to 90° between, which also results in…
Prusa Mini + Z axis horizontal top handle in combination with vertical handle, generate the two-points leverage support for ergonomics as a system to relieve tension on the ZY Axis structure frames, and provide balance support to the…
+2-slot Mini Stability Feet This is an upgrade of the 2er stability feet directed at both Prusa MK2.5, 3s+ and Mini Owners. It gives stability to the 2er sheet holder while adding two slots for the Mini sheets without the need of printing…
The cutouts can be filled with lead or steel shot, or plaster, etc. to give the base some extra weight. I used lead pellets and filled the remaining space with black tinted epoxy.
Bringe Struktur und Übersicht in deinen Kühlschrank! Dieser steckbare Organizer nutzt das vorhandene Stauvolumen optimal aus und sorgt dafür, dass Lebensmittel und Getränke übersichtlich und platzsparend verstaut werden können. ✨…
EN: Modular 3D Printed Shelf This shelf consists entirely of 3D printed modules and was designed for easy assembly and very high stability. The construction is based on a modular interlocking system that does not rely on individual…
To mount David Ds multiboard adaptation for the Prusa Enclosure on only parts of a side the snap fit STEP file provided by David D was remixed to allow increased adjustability. To be of any use you will need parts from the Multiboard for…
I designed this stand after testing different placement angles for the Sonos Era 100. Most desk setups either point the speaker too low or feel unstable, so I focused on improving both sound direction and stability. This version is…
This is a simple base you can add to your slicer along with the model. You can turn any object into a game piece, award, statue, or add stability to a tricky print. No need to edit your model, just layer the two files so the primary…
Update 29.04.2024 Added new parts which allow you to increase the height of the enclosure using the exsiting “connector_bottom” parts (excluded the acrylic panels which will need to fit the new height!): +30mm height (→ inner height =…
I needed an airbrush turntable for a project. Even though relatively lightweight, I wanted more stability for the platform so used two 608 bearings instead of just one. I also did not want to worry about getting an exact fit and fine…
stability feet for 5-6 sheet holder.
Have been using a variant of Bicycle and Car iPhone 6 Plus Mount family by dpc - Thingiverse for over a decade, but recently got an urge to try MagSafe charger / mount in the car. The car in question is a 2005 Mustang. Had an Apple…
This simple but highly effective system locks your office chair wheels in place without removing them. Just place the blocks under each wheel — the chair becomes instantly stable and won’t move, even under pressure.
The Braun LED work light is fantastic from harbor freight, but unless you have a metal surface, the light does not like to stand up. I created a base to make the light much more stable, and at the same time the magnet still works…
This simple 1x1 base allows any 1x1 Gridfinity module to be used alone. For a fancier 1x1 base, try the vanity base here: https://www.printables.com/model/511814-gridfinity-1x1-vanity-base The example was printed in Eryone Red/Green/Blue…
First, thanks to @tshelley for his great insert and all the work invested in it. I had an issue with the trays where minis kept falling out of place and every time I would grab a box I had to be super careful not to move it to harsh cause…
Core Adjustment Tool for the US Version (25.4mm tubes) Building the MPCNC Primo you typically get the effect, that the truck pipes (steel pipes on which the core is running on) are not exactly orthogonal to each other. Very often you get…
this is a handle for the hadly with a curved underside for stability
Needed a quick and dirty filament test to compare different filament types, variations or brands. Bend it! Break it! Stretch it! Do what you need to get an idea, how a filament works or feels.
Experience printing serenity with our Sorbothane foot adapters tailored for the Creality K1 printer. Crafted to diminish vibrations and mute operational noise, these adapters are designed to accommodate 1.25" (31.75mm) 50 Duro Sorbothane…
Remixed MagSafe phone stand with a 67.5° angle for better stability with heavier iPhones. F3D and STEP included.
An unnecessarily parameterized foot shoe / foot cup for the Ikea Skadis “feet” - the things that stand it off the wall. I mount mine against a brick wall, and I usually need the bottom to come away from the wall a bit to stop things…
As my old case broke so I created a new one. Picked up @NeoPrint3D's idea and integrated Josef Prusa on the back side. This version is much more rigid than my previous version as the phone push buttons are hidden, means no hole, means…
Print it with 15% infill. Print it in the orientation as shown in the image below and paint the support manually.
I added an overhang flange to the front and back of the adapter to help keep the telescope steady. The overhangs limit the front/back wobble of the telescope due to its weight. Suggested print orientation is on the side so the layers…
This foot is made to stabilize the Wahoo Fitness KICKR Indoor Cycling Desk Stand. Print two for each corner. Snaps on and stays in place with no extra pieces. No supports required.
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
ABS 0,3mm, infill 60% drží 3roky na člne, pripevnený bol skrutkamy, diery nie sú navrhnuté, každý motor má onú stavbu tak aby to sedelo všade si diery navrtas
Made some quality of life changes to this to better align it to my use case, you might find it useful. I liked the original but there were a couple things I wanted to change. Images attached here show my version in metallic brown, the…
The base of the clip gives a 3mm support surface which lays on the original Bambu front cover and, when assembled, the side covers. At least on my P1P the original design did bit bend down in the middle due to lack of support surface. The…
Stability base for holding the light when the magnet won't work.
Tired of the "Alzament Wobble" on your Mini? We all love the Alzament PLA for the good price, but if you are a Prusa Mini owner, you’ve likely noticed a slight compatibility hiccup. Because Alzament spools have a unique width and center…
My printer stand is built from extruded aluminium ftubes and plastic corner joiners. All available cheaply at Bunnings. When the printer gets up to speed the while stand sways back and forward. These brackets make a huge difference in…
Ich habe den Steel Sheet Holder für vier Bleche. Daher habe ich diesen Remix erstellt. I have the Steel Sheet Holder for four sheets. So I made this remix.
I designed an X-axis reinforcement for my CNC machine, 3D printed in PETG. The L-shaped structure enhances rigidity and stability, reducing unwanted vibrations during operation. Mounted with M6 screws, it ensures a solid connection to the…
I wanted to make a nice fridge magnet version of this, with a good surface quality. So I flattened the object and turned it upside down. This looks pretty good using a Core One with a textured printed sheet, but one needs a MMU to print…
Needed? Not really. looks cool? YES! I wanted an option that was connected to the front corners. Print all files in original position. Inner rod must be turned 45 degrees on plate or use auto. Be aware of the fitment direction. It's…
Remix of Wedgewood's (https://www.printables.com/model/617995-stand-for-milk-aerator-that-little-battery-powered) original design which adds a broader base. When glued together - the pair work together well for more stability when holding…
This add‑on is a cross‑brace that increases overall stability and rigidity. It reduces flex, keeps the mount firmly aligned, and makes the entire setup more secure—especially when the interface is under load or frequent use.
My cats kept knocking down the Catit senses food tree so they have easier access to the food. This print tries to solve that. I designed a cup that can be filled with small stones or sand along with a lid that can be glued on top of it.…
Stable feet for the room divider panel of VidaXL brand (https://www.vidaxl.com/e/vidaxl-5-panel-room-divider-anthracite)
Lighter kept falling down everytime I opened a drawer and it driven me crazy, so I made up this little handy adapter for better stability and problem is fixed!! ✔ 🙌
Enhance your DJ experience with this 15° inclined stand designed specifically for the DJControl Mix ! Made of 8 easy-to-assemble pieces, it provides perfect stability while securely holding your device, even during intense use. The design…
I purchased an inexpensive $25 clothing rack from Amazon . While it conveniently comes with wheels, any time I tried to roll it any where, it was very flexible. I created this design to slide on to the different sides during assembly…
I designed a small pen, pencil and caliper holder that I can move easily around the work bench and does not easily fall down. In my shop I like to have as much free work space on my desk as possible. Personally I do not like to have a lot…
An object topples over when its center of gravity (or center of mass) moves beyond its base of support. This process can be understood using concepts from physics, particularly equilibrium and stability. Here’s how and why it happens: ###…
Zde je přepsaný text s mírnými úpravami pro lepší srozumitelnost: Pro šroubovici o průměru maximálně 7,5 mm doporučuji tisk z materiálu PETG kvůli jeho odolnosti v zemi. Podpěry nejsou nutné, pouze je potřeba prorazit 2 vrstvy filamentu,…
Linux Tux bookend larger for better stability.
same base model, just added a triangle at the back for increased stability
Attachment for stability for the remote control Haier HTR-U27 When using PETG, the Y-axis can be reduced from 50 mm to 49.8 mm.
Three 6mmx1.5mm holes to each foot pad and a pause in printing. Add magnets to improve the stability. No glue needed
У меня часто возникало желание поставить данный шуруповерт. В связи с тем что площади для устойчивости у данного аккумулятора недостаточно я решил данный вопрос по своему. Надеюсь этот адаптер так-же подойдет под аналогичные аккумуляторы.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I bought some plastic glasses, special for dysphagia, the problem is that they weigh very little, I designed this support to be able to put the glass inside and improve its stability, so that the person who uses it is more independent.…
You want to screw your plate into somewhere but with gridfinity generator it is putting ALL plates a screwhole you don't need? THEN THIS IS FOR YOU You can put bins on top of this plate so it doesnt take any space but also its 1:5 ratio…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
![Stand for Burago F1 car model (1:43 scale) [Upgraded stability]](https://media.printables.com/media/prints/1073673/images/8123228_4a1075a1-224d-4ebf-83ea-3ee70d1c8b56_240b069e-fd60-4b1d-a171-138868fecf48/img_7889.jpeg)
![Pop Socket Clip (Added Stability) [Remix]](https://media.printables.com/media/prints/656280/images/5172625_8965487a-bea7-4836-9a98-da2031b4bff4_23837519-59c7-4dd4-bade-29174536a9c7/sprite-0001.png){kind=icon}
![Ikea Lack Foot For Balance/Stability [2-4mm offsets - w/ or w/o disc]](https://media.printables.com/media/prints/241987/images/2184337_fae8be31-65f0-4f36-a89b-3fbe2961d662/large_display_enclosure_foot_3mm_241987.png)
![Universal Ikea Lack Enclosure [High Stability from Scratch]](https://media.printables.com/media/prints/824688/images/6582939_120642eb-ebd6-4680-99d9-5c0d2e940c40_8beb1115-b5d8-414c-9894-edf9f2d5021a/20240424_194705.jpg)
