1,102 models
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
A model of standing owl. Original size is about 33 mm in height. The printed parts in the pictures are 50 mm height versions (about 150% in scale). Updates: 2022-09-13 - Overhangs fixed. Messy multi parts cleaned up .
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
I couldn't find this exact model here so I brought it over. https://www.thingiverse.com/thing:919475 Photos are Prusament Galaxy Silver PLA.
Print approx. €13.20–€16.13 excl. taxPreliminary estimate for one variant
Baby Groot Standing
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
Remix of Dom's Peanuts-Woodstock model for freestanding print display. Remix printed with Prusa Pineapple Yellow and Matte Black PLA; 0.20mm Layers; nice 15% infill; no supports. X and Y dimensions can be adjusted to fit display needs. A…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Hello fellas, standing Dachshund statue. Enjoy the print!
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
A convenient hook for your headphones that attaches using existing fixtures to FlexiSpot EF1/EG1 standing desks. How to Attach Remove both of the M6 screws from the top of the leg on either side of the desk. Then replace the screws with…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Standing letters 150mm (height), 110mm (wide). You can make them wider in your slicer.
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This is a cable management tray cover meant for an Fully Jarvis standing desk. It is mounted on the frame ends as Fully calls them. It has been heavily inspired by the great idea from MyStoopidStuff . Cover dimensions are 150x120 mm and…
Print approx. €3.40–€4.16 excl. taxPreliminary estimate for PETGSource material: PET
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Residents of Hawaii use the Shaka to convey the "Aloha Spirit", a concept of friendship, understanding, compassion, and solidarity among the various ethnic cultures that reside in Hawaii, lacking a direct semantic to literal translation.…
Print approx. €31.35–€38.32 excl. taxPreliminary estimate for one variant
Adjust the size acording to your needs.
Print approx. €27.18–€33.22 excl. taxPreliminary estimate for one variant
If you have a Flexispot standing desk and headphones, give this hook a try! It mounts using the existing bolts in the top of the desk leg (fits both left & right sides). The original model wasn't wide enough for the strap of my…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Another addition to your workspace/collection (scalable). Enjoy!
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A self-supporting spoolholder for normal spools with a maximal width of 85 mm. Print Setting recommendation: no supports. 3 shells 8-15 % infill PETG
Print approx. €5.93–€7.24 excl. taxPreliminary estimate for PETGSource material: PET
this is my first project. i drew and edited this myself. I hope it helps you as much as it helps me. The print file is the leg for the left side, you have to insert it twice into the slicer and mirror one of them
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
A storage solution to all those caulk tubes that we collect in our workshops/sheds/garages. I originally designed this to be wall mounted, but have also provided a modified version for free standing if that's what you require. (I haven't…
Print approx. €9.13–€11.16 excl. taxPreliminary estimate for one variant
Small standing fish printed with no supports, PLA 0.2 Quality and PRUSA MINI+ Curiosity: The whole model was designed with an ellipse for the body and a circle for the eyes.
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
A set of 10 different easter eggs designs to use as home decoration spreading springtime joy and festive charm. The models are approx. 10 cm high and 1,2 cm thick. Print Settings Print on the side (model files are already correctly…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for one variant
Adjust the size acording to your needs.
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Easy inserting system for easy print and attach cup holder and other things. There should be better angles to print this to have more durability while using, but this was design as an idea of having place for a cup near a Festool table.…
Print approx. €8.55–€10.45 excl. taxPreliminary estimate for one variant
Unless you come up with some extra complex option yourself, you really don't need a multicolor attachment! Four types of dials in two sizes. You can't do without these parts: (cifernik) four dial variants (A, B, C, D) 15 or 20 cm option…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Adjust the size acording to your needs.
Print approx. €14.88–€18.19 excl. taxPreliminary estimate for one variant
This item is no longer needed in my latest path design - https://www.printables.com/model/555238-mmu3-filament-path-design What this is: A single strong mount clip to attach the Prusa MMU2S Spool Holder trays specifically to the Home…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET
Description I designed this for a specific need, but wanted to share for other home labbers! This stand is designed to use minimal width and can hold 3x JetKVMs vertically (all pressure fit, no hardware need). It stands fine by itself,…
Print approx. €4.94–€6.04 excl. taxPreliminary estimate for one variant
standing initial: letter N
Print approx. €22.98–€28.09 excl. taxPreliminary estimate for one variant
standing initial: letter S
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
Two of my family members wanted the drying rack for their Bissell Crosswave parts, but neither one wanted to mount the wall. I redrew the holder from scratch and integrated a stand that just slides together. There is a 0.1mm gap on the…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
Standing Mount Sensy-one S1 Pro Multi Sense
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
standing initial: letter O
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Adjust the size acording to your needs.
Print approx. €15.41–€18.84 excl. taxPreliminary estimate for one variant
standing initial: letter N
Print approx. €21.28–€26.01 excl. taxPreliminary estimate for one variant
This frame is made to follow the 2 mm thick dial and completely cover the walls of the dial opening. If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
If you decide that the appearance of your clock needs to be improved, if you had an accident while printing and the layers shifted (for example, due to a power outage), the foot came off the base a little, or if you ran out of filament…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
standing initial: letter U
Print approx. €21.84–€26.70 excl. taxPreliminary estimate for one variant
Ice block mount for standing pedestal fan with rhomboid grid or similar. Printed with PLA+, without supports, 235º nozzle, 65º bed, 200mm/s speed. Ice block measures: width 80mm, length 151mm, thickness 26mm. Notes: Tighten the nut…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
standing initial: letter Y
Print approx. €13.91–€17.00 excl. taxPreliminary estimate for one variant
A simple printed part that lets you use an empty filament spool as a support for a shelf you can mount to your desk to serve as a standing desk. The supports can be screwed onto the desk and shelf board as needed. All settings used…
Print approx. €13.21–€16.15 excl. taxPreliminary estimate for one variant
standing Nespresso caffee capsule holder 2 line with cut out for easier use.
Print approx. €8.70–€10.63 excl. taxPreliminary estimate for one variant
This is a Heavy Duty storage case. Internal storage capacity is 83mm (width) x 132mm (length) x 21mm (height). Your contents won't get crushed. Best part it was designed to stand vertically. Now you can get your life organized the right…
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for PETGSource material: PET
This model is a specially designed blockage for the Songmics Standing Desk, created to prevent Roborock vacuum cleaners from becoming stuck underneath it. The design ensures easy installation and removal, making it a convenient addition…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PLA with a 0.2mm layer height. Minimal supports required. Link to Onshape model .
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
This is sliding rack fixing + end pcs for other end and end plug. this model should be 17mm pipe and 5 mm wire suitable. made small change after printing, since was little loose.
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
*I thought the MK3/4 were 250mm in height similar to most other printers in that size category, I will be working to add a version that fits the 210mm height build volume of those printers Scaled down to fit the bed of a standard 250mm…
Baby Groot Standing doesn't need any supports but you can add supports at the back of the head so its not better quality
I designed Bluey in Blender. One of her sitting and one of her standing. Models require supports.
A simple but effective freestanding 3D F1 logo. The logo is designed with a discrete backing to keep the lettering upright and spaced. The backing also means no base is needed as the logo is self supported. Perfect as a home decoration or…
Update 01/05/2023 Added “HSW Ez-V1 Foot Type 3 v1.0” Update 01/05/2023 “HSW Ez-V1 Foot Type-2 v1.0” added for better stability on taller walls and for double-sided walls. -------------- These feet use the Ez-V1 series clip and therefore…
A simple desk drawer I created for my standing desk to store small odds and ends that would otherwise clutter my desktop. The drawer is meant to have a small footprint and more or less match the dimensions of the standing desk control…
The messy cables under my desk were annoying me so I made a cable chain that fits in the existing cable grommet. Print instructions Category: Office Summary The messy cables under my desk were annoying me so I made a cable chain that fits…
Bugs Bunny, a fictional cartoon character in the Warner Bros. Looney Tunes/Merrie Melodies series. Bugs is an anthropomorphic gray and white rabbit who is famous for his flippant, insouciant personality. Due to Bugs' popularity during the…
used Onur horse scan to make a standing horse on pedestal, i printed it at 150%. if you print original or smaller the legs become quite thin and need to be careful removing the supports.
A customizable, freestanding desktop pegboard designed to organize your workspace, electronics bench, or hobby table without drilling holes into your walls. Compatible with standard slotted pegboard accessories (such as IKEA SKÅDIS hooks,…
I needed a free-standing spool holder for my X1 Carbon since I don't have room behind it to use the built-in one. Which honestly isn't that great anyway. It also was designed to go (aesthetically) with my filament storage rack Filament…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Model Description: A fully printable and extendable self-standing shelf that can hold more than 11 kilograms (on each plank). To extend, you need to print another leg and plank (the plank can be replaced by a wooden one). Helpful to have…
This is a piece from my series on cable management for standing desks. Added a longer Version for Apple Power Adapters. To manage cords without screwing into the desk was my goal. For tabletops with a 25mm thickness, use this solution.…
I wanted to print ezer's great low poly lion, but I found the model didn't have a flat base. So I went and flattened the lion's feet and the standing rock.
I designed this snap-on gadget for Norwegian (Idun) ketchup and mustard bottles earlier this summer. I use this snap-on lid a lot and it makes it so much easier to balance the bottles on its head so I can easily use all of the contents.…
A large, stylish desk or shelf ornament filled with good vibes only. I designed this sign in Figma and Fusion360 to learn multi-color workflows, and bring good vibes to my workspace. The finished print can stand on its own and looks…
3D dragon model created from an image generated using Meta AI and Backflip AI. Successfully printed on a Bambu A1 and an Ender-3 V3 KE. Print using: .2mm layer height 3 walls 5 top shell layers 4 bottom shell layers 15% Gyroid Infill (for…
baby groot without the base. see 3d view with music here: https://skfb.ly/6uzpK Category: Sculptures
Cute Baby Yoda / Grogu style planter in a standing pose, designed as a fun decorative pot for small plants. This version has a more expressive character look, with one arm raised and a tall standing shape that makes it perfect for desks,…
This is a free-standing filament rack that will hold 1kg (~200mm) spools. The holes are 20mm with set screw holes that can secure the dowels with M3XWhatever screws. Mine were a little loose because I had ¾ X 33-inch dowels, so the screws…
I wanted some free standing letters, so I used the Raleway font as a base, and expanded them to be 10cm high and 2cm deep. In addition, some letters have a curved base, which makes it difficult for them to stand upright, so I added a…
A new 3D figurine generated by AI, a wolf. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Gridfinity Peg or Standing Socket Holders - 1/4" Drive, Regular and Deep Sockets 1 X 4 Gridfinity Footprint Metric Includes Space for: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm sockets SAE Includes Space for: 3/16, 7/32, ¼, 9/32, 5/16, 11/32,…
A freestanding replica 3D NASA worm logo. The logo is designed with a discrete backing to keep the lettering upright and spaced correctly. This design is a replica of the NASA worm logo but has been tweaked very slightly to make the “N”…
Main features: Can accommodate any cable (endpoint size doesn't matter). Easy to print. Solid, but flexible connections. Easy to attach. Decent look ;). I recommend attaching the top mount with at least 1 screw, the bottom mount can be…
I needed a new spool holder that fit the following criteria: can hold a 2kg spool (or any really large or wide spool) spool can be slid off and on, no screws or caps or anything, yet will not fall off free standing So, I came up with…
Standing Man sculpture print it with supports
The 3mf file is including a modifier for changing infill. Because the anchor is leaning to the left the right side needs more infill.
A cute little Otter standing on its feet
Darts holder for 4 sets of darts. I initially edited thing https://www.thingiverse.com/thing:4459821 and removed one set of darts as well as the mounting holes. I added 2 foots so it can stand easily on a flat surface. You can find it…
This is a great model for those who love 3dprinting or are just starting. A beautiful sculptural art model that once printed will be great in your home or garden.
Check out all versions & support my work! HERE DESCRIPTION Santa is back in town! This cute christmas miniature will warm your heart and bring a smile on your face. Just make sure he doesn't steal your christmas gifts! Print santa in…
A freestanding 3D SpaceX “X” logo. The logo is designed with a discrete backing to keep the lettering upright and spaced correctly. If like myself you are a massive fan of SpaceX and everything they do then this is the perfect print for…
All of the other tree puzzles online had pieces that need to be sanded on all sides that touches each other/the tree. I did not want to go through that much effort, so I traced the puzzle myself in fusion 360 and made sure to double trace…
*SAE Models added Gridfinity Peg or Standing Metric & SAE Socket Holder - 3/8" Drive, Regular & Deep Socket Models 1 X 6 Gridfinity Footprint Includes Space for: 10, 11, 12, 13, 14, 15, 17, 18, 19 mm sockets SAE includes Space for: ¼,…
This is a piece from my series on cable management for standing desks. To manage cords without screwing into the desk was my goal. For tabletops with a 25mm thickness, use this solution. See also: Monitor Power Supply Holder and Power…
Print Settings: .30mm, 5% infill, No Supports. Rotate 45 degrees on print bed. I added a version with a thicker back ( Freestanding_Sunglass_Rack_4mm_back.stl )
Mickey Mouse model. Prepared for handpainting 0,16 layer, 5% gyroid infill, 2 walls, organics/tree supports
Instead of using a wood backing and nails, this String Art project uses a 3D Printed frame. There are two layers of holes so you can add extra depth to your design. I used a Size 24 tapestry needle with about 8 meters of embroidery floss…
Simple as it could be, just marvel studios
It seems that the provided version is giving a hard time to most users during assembly, plus not giving a sturdy impression. So I made an easy to use version. No assembly. And it holds a fair amount of weight without wobbling as can be…
I have a friend who is into chickens and has dogs and I'm sure this stuff happens. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Letter vary in height and width from about 65mm to 80mm and are 20mm thick. They can of course be scaled to the required size. For a nicer front finish, try flipping the letters face down if you have a smooth or textured build plate.…
A new 3D figurine generated by AI, a Sexy Standing Woman. I used a raft to print this model, and dod not scale it down too much, do it at your own risks ;-) I print my models on a slightly ageing printer. I try to find the best…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) SOME USERS ASK ME IF I CAN…
Standing Letters Package Volume 1 is the perfect package to add a personalized and fun touch to any children's space. This model includes all the letters of the alphabet, each designed in a charming, child-friendly style, ideal for baby…
Brown Bear Standing - Print-Ready Miniature by Mike Gyver Minis! ⚔🎲 Dominate the wilderness with this powerful Brown Bear , expertly sculpted with thick, shaggy fur and a heavy, muscular build. Striding forward on all fours, this titanic…
These T-Slot nut were made especially for the prusa mini aluminium extrusion (289mm) found on the official GitHub repository. The major advantage of these t-nut is that they are made to be freestanding, once turned 90° inside the…
