Counting matching models…
Economical and fast to print string test for quick iteration over different parameters that might influence stringing on your printer. Printing Parameters Print this in the layer heigth you want to use or a medium setting, something like…
If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower
The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
Print at 0.3mm layer height. Print without supports. You should be able to see the strings in your slicer preview If using Bambu Studio make sure your wall generator is set to Arachne. See a video of the artwork here:…
I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
Cute skull drawstring beads for your clothes.No glue needed, just slide them up the drawstring. Easy to print! Only 2g filament per set! Three sizes available (diameter of the hole): 4mm 6mm 8mm 4mm and 6mm are properly the most common…
Everyone's favorite low poly skull beads! Properly test-printed and optimized for the best results. Hole size is 3, 5, 7, and 9mm. Print settings: Filament: PLA Nozzle: 0.25, 0.4mm Layer height: 0.10 - 0.20mm Support Type: Organic (Tree)…
If you've ever needed to re-thread a drawstring for a hoodie, you know it can be tricky. After struggling with this once I designed these drawstring threader needles to make the process much easier. Simply pass the end of the string…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
A fragmented skull suspended in a string frame. Print at 0.24mm layer height without supports If using Bambu Studio make sure your wall generator is set to Arachne If using Cura make sure 'print thin walls' is checked. If you want to…
For STL user : You can print in full but to reduce support cut at horizontal below the stand with a support blocker on the stand side starting at 2mm (full plate) Experience the thrill of aviation with this meticulously crafted model of…
No fancy settings, simple design. You can Support me by making a small donation: https://www.paypal.me/sharad1209
This test part is optimized so that you can print it quickly to achieve many iterations in a short period of time without wasting too much filament.
Stringing Test für PETG mit unterschiedlichen Temperaturen. Von unten 260°C bis 235°C
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
Very good string test. It does not have problems with slicing it in Prusaslicer anymore.
File for testing retraction
This is a very long snake (over a meter long), which has a small hole in the head to insert fishing line through. I personally use this as a cat toy, but it could be used to scare some friends! In the pictures, the model is scaled down to…
You can show off your love for Peeps and add some Easter flair to your hoodie drawstrings! They make a perfect gift for your co-workers! Print a pair in every color! Print one pair in 30 minutes and uses under 5 grams of filament! They…
petit test pour le stringing Print Settings Printer: Alfawise U30 Rafts: No Category: 3D Printing Tests
I designed a 3D printable string action gauge/ruler that can be used to measure the string action on a guitar or ukulele. It features measurements in both millimeters and fractions of an inch. It can be optionally printed in two colours…
New Dual Colour version! I recently redesigned the text label to make the most of owning a multi colour printer. This prints well on a 0.4mm nozzle, just make sure you have good 1st layer adhesion. Set of 5 common radius, and some less…
A String Biplane model with spinning propellor and wheels. Print the Biplane file at 0.3mm layer height and if using Bambu Studio make sure your wall generator is set to Arachne. All parts are printed without supports I found a brim…
Remix to fit my EGO string trimmer better. The original mount worked well for a trimmer that had a round shoulder, but this fits better with trimmers that have a rounded off square shoulder.
A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644
Read the guide on stringing and oozing: https://help.prusa3d.com/en/article/stringing-and-oozing_1805 Test different retraction lenghts and temperature settings. About 8 minutes print time.
Heart suspended in strings artwork. Single and dual colour versions available Print at 0.2mm layer height If using Bambu Studio make sure your wall generator is set to Arachne. See a video: https://vimeo.com/860773935?share=copy
The Modular Fiddle is a platform for violin-family instruments. I make professional quality electric violins using the Modular Fiddle platform. The files listed here make the latest-and-greatest 4-string acoustic Modular Fiddle. V4 is the…
For handing your Milwaukee Quik-Lok string trimmer head. Print at .15-.2 mm and mount to wall.
Another stringing test, prints fast, requires little filament. Prints in 10-15 minutes.
A Star Wars String Artwork. Print at 0.3mm layer height without supports. Set wall generator to Arachne if using Bambu Studio)
NOTE: The STL of this model is free for non-commercial use - you are free to print as many as you want for yourself or friends, so long as there is no monetary exchange. Feel free to use this model as a basis for remixes to make grips of…
Updated to change print orientation along the diagonal axis and extend diagonal brace into holder cup for greater strength. Can also be printed along top axis with some support. Also fits EGO Power+ Powerhead PH1400 Printed 0.4 nozzle, 4…
Printed on my MK3S with a 0.4mm nozzle. I used the 0.3mm draft profile, the only changes I made were to check ‘detect thin walls’ and to change ‘seam position’ to rear. If when you slice the vase with the above settings it says there are…
Have you ever accidentally pulled the drawstring out of your favorite pajama pants? Trying to push a floppy string back through a long fabric channel just so you can keep your pajamas tight along your body can be incredibly frustrating.…
String art featuring an Icelandic horse. Print at 0.3mm layer height without supports. If you are using Prusaslicer check the 'detect thin walls' box and make sure the 'wipe while retracting' is unchecked in your printer settings.…
VANOCE | String Art Flat Ball, Christmas Tree The flat string art ball from my collection of Christmas Tree decorations . It prints 100% without supports , despite the strings floating in mid-air. Just make sure to check the recommended…
Circle String Art Print at 0.3mm layer height. If you are using Bambu Studio set wall generator to Arachne You should be able to see the strings in your slicer preview
MODEL DETAILS This Valentine's Day-themed model doubles as a stress test for your 3D Printer. If you liked this model, why not try our other stress tests too? Warning: This is meant to be extremely difficult. Keep an eye on your printer…
Guitar string winder drill bit (standard 1/4 inch) for use with accu drills / screwdrivers. The included f3d file uses user parameters if you need to adjust anything.
Guitar string winder tool. fit with bearing 608 without any tools. Manivelle pour mécanique de guitare se monte avec un roulement 608 sans aucun outil.
A twisty string decorative vase Print at 0.3mm layer height without supports If using Bambu Studio check that wall generator is set to Arachne.
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
*** Updated version with additional bracing for stability *** I had good success with my steel string guitar , but it required a huge printer. For folks wanting a more manageably sized project, I decided to try a mandolin instead. The…
Improves grip on string launcher handle. Can pull the loop or just hold as normal with some more surface area. Snaps on and off if needed. Let me know your thoughts or suggestions!
Beads for hoodie strings with Celtic symbols and a 5mm hole for the string to thread through. I printed them in black PLA and then used metallic Sharpie pens to colour the top and bottom. A small tree support was used for the top of the…
A small but effective Stringing test
J'ai eu besoin de changer toutes les cordes de ma guitare, et je me suis dit que c'était le moment de dessiner ma propre Manivelle pour tendre les cordes de guitare. Je me suis inspiré d'un modèle Dunlop adapté à mon besoin. Il ne…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Hardware requirement: #4 x 0.375in Thread-Forming Flat Head Screw, QTY 9 Two sections of 4mm elastic string Talon Magazine spring Secure the Magholder with one #4…
INFO: Instructions available as a PDF in the attached files. -------------------------------------------------------------------------------------------------------------------------------- Hello hello Nerfers! The Silica-5 is a massive…
A model of the golden gate bridge in San Francisco How to make: Print all STL files twice in the orientation provided, or print the objects in the .3mf file twice to get all parts. Connect the two roads with two pieces of filament (about…
Cute dog paw print bead for shoe lace or draw string Bead Size: 20mm x 28mm x 7mm Bead hole: 4mm Printed with PLA with no supports
This model is of a balloon dog I made but I've shrank it to mini size and added a perfectly fitted hole for a drawstring. The hole will fit any drawstring that has the plastic tip 4mm or smaller. 0.2mm layer height 10-15% gyroid infill…
Simple retraction and stringing test for your printer. Every step can be used to indicate when and what settings have been changed with a script you added and help you find the correct value. Can be scaled up, down, be printed with…
Tips are appreciated and go towards creating new designs Changelog: 2021-12-21: Added experimental male-male axis connector for use with an (experimental) separator for creating multi-spools 2022-05-07: Added a winding aid. Use an M6 bolt…
use a .2 mm layer height I also recommend scaling it up about 10 to 20%
Follow us on Instagram: https://www.instagram.com/sektor7_studios_3d/ Hello everyone :) Attention MERCEDES-BENZ fans. I have designed a very cool string art stand with MERCEDES-BENZ LOGO for you. Both the stand and the Venom string art…
A replacement for a common type of ball-shaped, spring-loaded stopper, for tightening drawstrings on clothes, bags, etc. You'll need: 1x print included “Body” model 1x print included “Plunger” model 1x spring +-11mm long, +-7.5mm outer…
Follow us on Instagram: https://www.instagram.com/sektor7_studios_3d/ Hello everyone :) Attention Marvel fans . I have designed a very cool string art stand with Venom for you. Both the stand and the Venom string art are very easy to…
For STL user : You can print in full but to reduce support cut at horizontal below the stand with a support blocker on the stand side starting at 2mm (full plate) Experience the thrill of aviation with this meticulously crafted model of…
This is just a tiny and simple stringer to put anywhere on your blaster to fire at roughly 60 fps, so nothing to write home about but probably highly useful for close quarters games against shields or special targets that require mega…
Pokeball jewellery Multimaterial
A nice sculpture of DNA Strings, and a nice challenge to print right. Enjoy! Show your makes please!
These unique gamepad-shaped beads are a great addition to any hoodie with drawstrings. Designed for gaming enthusiasts, they add a fun and geeky touch to your outfit. The hole allows for easy attachment to strings, and the minimalist…
Be sure to upload makes!
small and fast printer test with overhang, bridges and stringing tests…
Needs printing with supports.
A few different stringing test. Because models are different so this will help to test stinging. They can be used for any type of filament.
🌼 Daisy Drawstring Bead – A Blooming Cute Accessory! 🌼 Bring a touch of springtime charm to your hoodie, backpack, or sweatpants with this adorable daisy-shaped drawstring bead! Inspired by the classic Gänseblümchen (daisy) , this bead is…
Next time the drawstring comes out of your garment, instead of struggling to get it back in, print this model and easily fead it back through (almost like a giant needle!). This is very fast to print and uses very little filament. This…
Update 08/06/2025: Added a new version of the Muzzle (Hippo_8_Extended Muzzle). I extended the front of the muzzle so it gives more compression for the string and may give a performance boost. You can attach a longer Picatinny rail…
For STL user : You can print in full but to reduce support cut at horizontal below the stand with a support blocker on the stand side starting at 2mm (full plate) Experience the thrill of aviation with this meticulously crafted model of…
Valentines Heart - Levitující Valentýnské srdce pro Vašeho miláčka. Pro lepší efekt levitujících srdcí, doporučuji využít možnost změny vlákna, já použil čiré PLA od Nebuly. Případně můžete využít MMU či AMS, dle možností Vaší tiskárny.…
Battle stringiness by enhancing retraction and/or wipe, or eliminating Z-hop. At the end of the day, a good quality filament or a very dry one will just not string. The two white prints in the picture are simply befor and after a spool…
diameter : first circle:3mm second circle: 5mm square:4x4mm and last random shapes separated by 2mm the whole is 80x20x41mm (without a base 40mm)
Cute simple Animal Paw for your hoodie Drawstring ! I have made single colour and multicolour print profiles. These do not require supports! For easier instalment, using Allen keys help If you have any issues let me know and ill try fix…
There are already many calibration and test parts to get rid of the stringing of your printer, but this one is optimized so that you can print it quickly to achieve many iterations in a short period of time without wasting too much…
This is a candle mold container for 40mm diameter and max 100mm tall candle. Lock the mold container with a ziplock Put the candle string through the bottom lid and tape it to lid's hollow Attach the bottom lid to the bottom of the mold…
Update --------- LANKA Overhaul Mods for Leedle's cool Lanka stringer blaster. Thanks for making these files free and remixable. Changes made (shown in the pictures in green color): modified the mag retention to use angled Talon mags…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You can use these clips in conjunction with a trellis string…
I printed it in Bambu Lab basic PLA (one of the filaments that came with my P1S). Printed at 20% infill, 4 walls, and the base printed at 100% infill for resistance to flexing when loaded.
Also in the READ ME.txt file: This version of the Cricket has a slightly larger grip, modified lever with better handles, and a redesigned receiver that allows for low power or high power shots, depending on the elastic draw length. It…
Stringing Test Tower with notches every 5mm. Stringing Test Turm mit Kerben alle 5mm.
Instead of using a wood backing and nails, this String Art project uses a 3D Printed frame. There are two layers of holes so you can add extra depth to your design. I used a Size 24 tapestry needle with about 8 meters of embroidery floss…
🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…
Spool cap for Worx string trimmers. Should be compatible with various Worx string trimmer models (WG150, WG151, WG152, WG153, WG154, WG155, WG156, WG157, WG160, WG163, WG165, WG175, WG180, etc.) Suggested to print in ABS or ASA Fusion 360…
Drawstring beads with Straw Hat Pirates symbol\ 3 hole sizes - 4mm, 5mm, 6mm. If you need other sizes, drop a commen
Darth Hoodie Clip 🖤🎭 Add a powerful touch to your hoodie with this Darth Vader-inspired cord clip! Simply slide it onto your hoodie strings—no glue or sewing needed. 🔹 Simple & Functional – Fits most hoodie drawstrings 🔹 For Galactic Fans…
3D print this string art torture test for your 3D printer to make sure it is greatly calibrated!!! This model will make sure your 3D printer can print mid-air bridges, a key for successful string-art prints!!! PRO TIP: DO NOT ENABLE…
Most string winders make you move your hand in a circular motion (like cranking a bicycle pedal). This more ergonomic version has the handle axis tilted at 7 degrees which lets your wrist pivot rather than translate (like whisking an…
Print the same way the original was. I modified this to fit humbuckers (non-covered, only the open bobbins will fit and barely). No more screw holes, deepened the electronics cavity. Narrowed and tapered the neck pocket and got rid of the…
Meet Scyphozoa belonging to the kingdom Animalia and phylum Cnidaria and give him a warm welcome in your Christmas decorations. A completely different Christmas decoration this year! Simply slide it over an existing LED of the Christmas…
![Golden Gate Bridge [String Art]](https://media.printables.com/media/prints/573999/images/4590471_3f637853-6699-498b-9021-24fb5d417009/1693931560144.jpg)
