Pajama Waistband & Drawstring Threader Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easily replace or re-thread the waistband string in your pajamas, sweatpants, or hoodies with this simple, flexible tool
- Rating
- 5 / 5
- Likes
- 690
- Downloads
- 1,507
- Makes
- 12
- Views
- 5,625
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Have you ever accidentally pulled the drawstring out of your favorite pajama pants? Trying to push a floppy string back through a long fabric channel just so you can keep your pajamas tight along your body can be incredibly frustrating.
This 3D-printable Waistband Threader makes feeding cords fast and effortless. It acts as a smooth, flexible guide to pull your string entirely through the waistband tunnel without snagging.
Key Features:
Smooth Tapered Tip: The front edge is smoothly rounded to glide effortlessly through the internal seams of pajama waistbands without getting stuck.
Friction-Lock Eye: Instead of tying a massive knot that might jam in the fabric, simply weave your waistband string through the integrated rear loop. The friction holds it tightly in place while you pull.
Flat & Flexible: Designed with a slim profile so it bends easily around the curved waistlines of pajamas and sweatpants.
How to Use:
Pass your waistband string through the rear hole and loop it securely.
Insert the pointed tip into the garment's waistband channel.
Push the threader forward, scrunching the fabric over it, and pull it from the other side until the string comes out the opposite end.
Crucial Print Settings: To make the tool flexible so it bends without snapping, follow these specific settings:
Material: PLA, PETG, or ABS/ASA.
Infill Pattern: Concentric (This is the secret! Concentric infill draws long lines down the length of the tool instead of zig-zags across it, making it much stronger when bent).
Infill Percentage: 100%
Layer Height: 0.20mm
Supports: None required! Prints perfectly flat on the build plate.
Brim: Not needed.