Counting matching models…
Shorter LCD supports designed so that the MK3/S can fit inside an Ikea Stuva enclosure with a hole for the bed cables. There is one hole for each side, slightly smaller than the bolt. Use a m3x10 bolt to thread directly into the plastic.…
After my child did a pull-up, the clothes rail bracket broke. Unfortunately, this is no longer available at Ikea and so I designed it quickly. How I did it with a cell phone, Inkscape and Tinkercad, you can see in the video. Mehr…
Caliper holder for Stuva
Türgriff / Griffeinsatz für die älteren IKEA Stuva/Platsa Schränke. ============ Door Handle / Handle Insert for the older IKEA Stuva / Platsa cabinets.
This is a handle for the IKEA STUVA MALAD drawers. Originally, they are just a hole, but I didn't like that so I made this. I decided to print them black to make some contrast, although probably most people would want to print them white.…
Höhenverstellbare Füße für IKEA Stuva/Platsa Schränke. Das Druckteil selbst ist 7cm hoch und es wird eine M8 Schraube sowie eine M8 Sechskantmutter benötigt! Je nach Länge der Schraube ergibt sich dann der Weg der Höhenverstellbarkeit! In…
I wanted a mount that would hold my C270 camera securely but not get in the way. Designed to fasten to the pre existing holes in the Stuva Cabinet this mount means you won't damage the cabinet. You could also use this mount with any…
This is a spare IKEA 108903 - STUVA NORDEN HEMNES - Quermutter - Barrel Nut for an Hemnes bed. We lost one. So I designed, printed and used it succesfully. Just cut or press the M6 thread into it. Use the original bolt for pressing or an…
This is a mount for the Raspberry Pi Camera to fit with a nice IKEA Stuva mount I found on thingiverse. Please note that only the part that holds the Pi camera is included. Donload the additional parts from the original creator on…
Hey there, this is my strong design for a Wall Mount on top of the printer, using the IKEA Stuva Pole 17225 which is clipped into the wall mounts. Just print as much as you need and use the Stuva pole. UPDATE 13. Sep 2023 I added two…
Added hole with thread, to use the original support that comes with the printer. I needed a support to put specific rolls or small samples and not have to hold them. And what better than to take advantage of the original support part.
Español Percha para cama ikea stuva English Hanger for ikea stuva bed
The Stuva cabinet from IKEA is the ideal starting point for building an enclosure for your 3D printer. With most printers space is limited inside the enclosure so I designed and printed this mount to use the Ender 3's original spool…
This is a collection of parts I designed myself or found on Prusaprinters or Thingiverse that is used to place my Mk3s with MMU2 inside an Ikea Stuva with Sindvik doors. The filaments are placed on top of the Stuva. The following parts…
Safety First. Prevents the baby from reaching into the funny designed STUVA cabinet. Should fit perfect. In case it doesn't: Apply glue. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: Yes Resolution: 200…
Choose a printing setting that you prefer and print. Print instructions Category: Household Summary Choose a printing setting that you prefer and print. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
A remix of Tronnic's sheet holder to hold 6 sheets, allow for thicker sheets ( I have a garolite build plate that is a bit over 3mm thick), and to fit the shelf hols in the IKEA Stuva Cabinet. Category: 3D Printer Accessories
Thermometer Stuva Ikea / Soporte termómetro Stuva Ikea
The Stuva cabinet from IKEA is the ideal starting point for building an enclosure for your 3D printer. This mount allows you to attach your PiCam to the inside of your enclosure. Its designed to use two of the factory pre-drilled holes in…
our daughter got a new bed from the Ikea stuva line. At some point she was annoyed to get out of bed at night for a drink. "Dad, can't you print me something?" "SURE!" and then it goes on Print Settings Printer Brand: Creality Printer:…
I have build an enclosure for my Creality Ender 3 Pro inside a IKEA Stuva cupboard. Unfortunately the Stuva line is a little to small to comfortably fit the heat bed cable together with a cable chain so I made a hole in the back of the…
Original Prusa i3 MK3 ENCLOSURE - made from stuva parts Ikea work in progress... from IKEA part list norwegian numbers 1 x STUVA frame Artikkelnummer: 301.573.77 2 x STUVA GRUNDLIG Shelf Artikkelnummer: 001.286.97 2 x SINDVIK Vitrinedør…
Here is my spool holder system for a IKEA STUVA & BESTÅ Combo. First of all, Please note that these are primarly adapted for a BESTÅ cabinet with a replaced backplate. The original ikea one is very thin and flimsy. But I have also…
Without these, the Stuva backwall will vibrate and create noise when the printer moves quickly. Just print the side pieces 2-4x and the top/bottom pieces 4-6x, then just stick them in the gap between the backwall and the nut the wall sits…
It is a simple holder for a flower pot. The opening of the holder has an inner diameter of 130mm. This means that a conically shaped pot can be held perfectly and also easily changed. Great for climbing plants.
Print with supports. Use a support blocker for the upper section to save filament. I love the STUVA design but the new wall anchors are UGLY. So I made this to cover them up. Category: Household
Ikea Stuva hook with many variations of thickness. 10, 20, 30, 40mm You can use for the Stuva changing table, for the bed or any other application. There is also the step file in case changes are needed.
We couldn't fix the heating lamp for our baby on the wall so I designed a system to hold the lamp above the changing table. I used 40mm wood rods as base. The System is fully movable in all direction and is fixed on the STUVA changing…
Modified waldamore`s LCD mount ( https://www.thingiverse.com/thing:2029649 ), so that it attaches to the screen with M3 screws and nuts. Also made a "wall mount" which fits in the standard holes of the Ikea stuva cabinet (where you mount…
Ikea Stuva - Gancio Borsa per Appendi Abiti
This is a remix of ArcanePath tool holders. I have mixed them together and made it fit Ikea Stuva frame (holes are spaced 19.3cm apart). I have moved spanner holder and centered it between pliers and wrench. Print Settings Printer: Anet…
Ikea Stuva hook with many variations of thickness. 10, 20, 30, 40mm You can use for the Stuva changing table, for the bed or any other application. There is also the step file in case changes are needed.
A slightly shorter version of https://www.thingiverse.com/thing:2811985 . Edit 21.09.2018: Complete rework with chamfer on the cap. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.3 Infill:…
Yet another Ikea Stuva filament guide ! This one is made with OpenSCAD and fully customizable ! Not really a remix, but designed from https://www.thingiverse.com/thing:1895060 Print Settings Printer: Anet A8 Rafts: No Supports: No…
Holder to mount Ikea Räcka as a cloth rod in e.g. the Stuva cabinets. For more strength print on the side with support. If you don't need that much strength printing flat without support is good enough. I printed this in PLA. Top Layers:…
This is two tool holders for the IKEA Stuva cabinet. The magnets is 12mm in diameter.
As a bar I have used the "Stuva Grundlig" from Ikea. But you can also use another tube or rod with a diameter of 1.5cm. Should you also want to use it in Stuva cabinet I recommend a length of 55cm. you can also use the bracket for other…
I wanted a mount for the filament reel that went inside the nice new Ikea Stuva Cabinet but I also wanted it to leave the cabinet as undamaged as possible, so decided to use the pre-existing shelf mount holes. The mount fastens on with 4…
The Stuva cabinet from IKEA is the ideal starting point for building an enclosure for your 3D printer. With this part I help the filament flow from my spool to the extruder on the side of my printer. This is part of my project to build an…
The Stuva cabinet from IKEA is the ideal starting point for building an enclosure for your 3D printer. Unfortunately the box is too small to fit most common printers (I have an Ender 3 Pro). To mitigate some of the space issues I designed…
Modified maciejb´s Raspberry Pi case ( https://www.thingiverse.com/thing:685074 ). I added the ability to mount it in the standard holes of the Ikea stuva cabinet (where you mount the shelves). Print Settings Printer Brand: Prusa Printer:…
Door lock for IKEA Stuva box & Sindvik door. It's for the enclosure for my Prusa i3 MK2. Should print easily with no supports. You need 1-2 screws. [Update] Added another version where you can more easily control and adjust the lock…
Remixed tacotime666's stuva plug since mine didn't quite fit the printing cabinet. This remixed version fits, I just needed to round the corners a little and make the inside diameter slightly smaller. Category: 3D Printing
Hook for Ikea stuva bed with 3 optional decorations to clip inside (girl underwear, short and t-shirt). Design of the decorations from Flaticon: T-shirt icônes créées par Good Ware - Flaticon Un pantalon icônes créées par Good Ware -…
