Counting matching models…
There's two main variants. One with the classic long hair, and one with a shorter bob style haircut that granted makes her look more like Supermom, than Supergirl, which I'm fine with! She can be printed without supports in two pieces…
model of super girl Print instructions printing is straight forward . i printed mine with supports to bed only . assembly and finishing is tricky as the body is supported by pins in the leg. so the legs need to be installed or mounted…
A simple 1×1 Gridfinity Superglue holder made to store a 50gr bottle of Everbuild CYN50 Industrial Superglue but should work for any bottle of glue smaller than 38mm in diameter. Printing Nozzle size: 0.4mm or 0.6mm Layer Height: 0.30mm…
Superglue holder designed for small bottles, the bottle I am using have 35x24mm dimensions.
Replacement dust cover for the EXT Bus on the rear of the white PCEngine, CoreGrafx and SuperGrafx console. Those pins have a tendency over time to develop corrosion, so keeping them protected is important. If you don't have the ability…
Storagebox for bottles of super glue, diameter of the holes is 31mm. There is a box for one bottle, or you can have a box for three of the bottles. The box for three bottles have two extra holes for needles that I always need to push the…
This little 1x1x3 Gridfinity bin can hold up to 8 tubes of 1g super glue. I specifically made it with these UHU tubes in mind, but I imagine it can fit other brands as well. The fit varies per tube, so sometimes they jiggle around a bit,…
Designed to be refillable with the super glue gel tubes from harbor freight. I found the best print orientation to be as pictured above. Lay the squeezer on its side and sink it into the build plate 9mm (Thickness is 18mm) then glue the…
This is a highly controllable superglue applicator inspired by the Loctite "Control" super glue applicator. This design can be used with any regular super glue tube. V2 is now optimized for 3D printing by filleting all the sharp corners.…
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of blocks that can be used to recreate the Supergirl figure at…
After bringing my beads to various cons and having people make kandi bracelets, I realized I needed a better way to help people superglue the knots so that they don't accidentally have their kandi fall apart. This seems to do the trick.…
I printed with .4mm nozzle with .2layer heights. I like tight tolerances and modeled accordingly so that the glue bottles won't fall out easily.
Superglue tubes are annoying as they quickly go solid. They can last longer if stored upright with the cap on tight. Since the bases don't lend themselves to being easily stored upright I used the gridfinity plugin for Fusion 360 to make…
This is a fan-made 3D print model of Supergirl. It shows the heroine in a dynamic flying pose with a flowing cape and a strong stance. The statue is optimized for 3D printing and comes with a stable cloud-effect base. ⚠ Disclaimer: This…
The source marked this model as adult content.
This 1x1 Gridfinity module is 3u high. It holds four 3g tubes of superglue, two with the lid down and two with the lid up. Opened tubes should be stored lid up so they don't leak. This module is designed without any through-holes, so if a…
This part fits the Gridfinity system Gridfinity base sizes: 1x1x0,5
note 11th April - Significant improvemtne to grippiness! I accidentally had an older version of the legs - if you downloaded it, get the new version here. 📌 TL;DR: Your Bowden tube gets slowly pushed into the dryer during printing. This…
A holder that fits 2 bottles of Pattex superglue. 0.2 mm supports optional
Supergirl (en español : Superchica en las historietas publicadas por la Editorial Novaro , se llamaba Superchica ) es el nombre de varias superheroínas ficticias que aparecen en los cómics estadounidenses publicados por DC Comics . La…
can be printed without support
I spun up a quick model to colocate my favorite glues: Gorilla Glue Clear (my new favorite general purpose) Loctite gel superglue Loctite liquid superglue (Glue stick, accelerant, or what have you). The focus was the first two items, but…
Resizing of Miroslav K's excellent model, to fit an Everbuild 20g container, item 5029347900069 . FreeCAD users could adjust the fit using the included source model . Just edit Sketch001.
This high-quality fanart bust of Supergirl is a true eye-catcher for any comic or superhero fan! Featuring intricate sculpting with her iconic "S" emblem, flowing hair, and a heroic pose, it’s ideal as a decoration or collector's piece. 🛠…
Ikea Milsbo shelf support (corner) which double functions as attachment to the supergreenlab LED holder The model is designed to work in combination of the original shelf supports of IKEA - 10003241 (white) - 10003245 (black) The complete…
The source marked this model as adult content.
Wanted a holder for my Biltema superglue. Printed with PLA
The truth is that there are not many 3D prints of superheroines, girls were in the minority. To compensate a little, here is this design with three from the DC universe. The result is spectacular in 7 colors. For colors and layer changes,…
This is the wall cup / door frame socket / anchor (they seem to go by different names) that the child / pet gate slots into. We purchased a Northstates Toddleroo Supergate Explorer which comes with 4 wall cups and 4 self adhesive pads to…
Experience the power and grace of Krypton's last daughter with this stunning 3D printable STL model that captures every heroic detail. This meticulously crafted Supergirl figurine showcases her iconic costume and flowing cape in a dynamic…
Has your super glue ever spilled on your table because you didn't have a proper place to put it, where it wouldn't fall? This easy print tackles exactly this issue. It also has comfortable holes on it's sides for your fingers when you…
Works with the Loctite liquid (NEED SUPPORTS ON BOTTOM) **MAY HAVE TO MAKE ADJUSTMENTS** Length 3.61 CM - Width 2.1 CM
Added magnets - and adjusted the size to the original Gridfinity size (41.5 x 41.5)
The source marked this model as adult content.
Unleash the power of Krypton on your desk with this stunning 3D printable STL model that brings Superman's iconic cousin to life in bold detail! This curvy Supergirl figurine showcases the beloved DC heroine in her classic costume,…
I wanted to store a small packet of superglue in my backpack without worrying about it getting crushed. It fits a single-use packet using a snug friction-fit. Here is the glue I designed this case around:…
Bring the power of Krypton to your desk with this stunning 3D printable Supergirl STL model that captures the iconic heroine in a dynamic pose. This detailed figurine showcases the Girl of Steel in her classic costume, perfect as a shelf…
Systainer sys3 437 interior for Tormek SuperGrind 2000. Printed the bottom inlay in 4 quarters. Full size stl file also available. It doesnt't fit into a 337 systainer, so I added a cavity to store an additional grinding stone on the…
Gridfinity holder for x2 superglue tubes (0.14 fl oz). I have noticed some size variance within the tubes themselves, some may fit more snuggly than others. Link to the item: https://amzn.to/41Qxas6 Links provided may be affiliate links…
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
Made to hold common types of liquid SuperGlue bottles (with paintbrush application), this base will prevent the container from falling and spilling.
Based on this tiny image and my boundless imagination. Minimal supports required.
This Super Glue from Hornbach has been my favorite, mainly because it does not instantly dry out after a single use. Using it repeatedly has made the nozzle clogged and brittle though. Thus i created these replacement nozzles. Now it can…
A detailed 3D printable statue featuring Supergirl in a playful, stylized pose. Capturing a charming "shh..." gesture with a finger to her lips, this model brings a fresh and dynamic look to the iconic DC superheroine. Design Features:…
A set of pliers and a key to losen a stuck superglue cap. Pliers inner diameter: 12.5mm. No supports needed. Set kleštiček a klíčku na uvolnění zalepeného víčka vteřinového lepidla. Vnitřní průměr kleštiček: 12,5mm. Podpěry netřeba.
Magnet clip for Tormek SuperGrind 2000 water trough to trap steel particles. May also fit on older T-7 models. Has place to glue 10x2mm cylinder magnets in place. Model is slightly bent inwards to pre-tension the clipping force. Onshape…
Sekundenkleber für Kunststoff 25g - wasserfest, hitzebeständig & mit Nadel Verschluss
Unleash the dramatic power of this stunning 3D printable Supergirl figurine that captures raw emotion and strength in every detail. This expertly crafted STL model showcases the iconic heroine in a powerful pose with arms raised,…
I used to sell 3D-printed camera gear (GoPro parts among that) but found that I dont have time for it anymore. I decided to share my models instead. Print with ABS, PETG, ASA, Nylon or any other strong material. Insert a M5x25mm screw…
Simple holder for Loctite XXL Superglue (20g) As seen here: https://www.amazon.co.uk/dp/B07Q8N9ZVF Fits in very snugly, might even hold upside down if you'd rather have it that way. Fits into HSW insert.
A Simple Bin intended to hold up to four tubes of 3M Superglue. Easy, fast, and useful print. If you like the model post a make, and share any tips you have to help everyone else out.
Simple holder to store a “Kraftprotz” superglue bottle. Specific superglue: https://amzn.eu/d/fruOrak or https://www.3djake.at/arka/arka-kraftprotz-superglue
I used to sell 3D-printed camera gear (GoPro parts among that) but found that I dont have time for it anymore. I decided to share my models instead. Print with ABS, PETG, ASA, Nylon or any other strong material. Insert a M5x25mm screw…
Great tool for the work bench easy to print. Video link https://youtu.be/0iX3dObx8rU Purchase link https://teleportpod.com/portal/17ef0064-a8d9-4a06-9aa2-6bfa728948c5?item=1219 Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
Superguard meeple to use on the "Mist over Carcassonne" scoreboard ------------------------------------------------------------- Meeple Súper Guardián para usar en el marcador de puntos de "Niebla en Carcassonne" Print Settings Printer…
My last superglue bottles were all discarded because they were not stored properly. I recently switched to Gridfinity and designed this holder for the superglue. This holder fits 3 bottles of 20g. Slots for the bottles are 25mm deep.
I kept knocking over the glue box, so here is a stand for it. Printed in vase mode 0.6mm bottom and 0.6mm extrusion width.
After a great sugestion I combined two models and added som extra holders for small accessories.
Locktite Superglue has a really nice bottle that doesn't seem to clog up. But it does like to fill with air and make it hard to squeeze the glue out of. Because of this I tend to balance it upside down so it can drain, but it falls…
Dies ist ein kleiner Halter für die Top2Glue (Sekundenkleber und Granulat) Flaschen der Firma Langlauf Schuhbedarf. Ich bewahre den Kleber in der Kühlschranktür auf, die 20g Fläschchen bleiben so an ihrem Platz. Die Halter haben einen…
A few stencils and cooke cutter style stencils that are used to aid in cutting out Supergrips for the Zeromouse v34 This model should be able to be printed on any printer using standard settings. But I recommend 0.16mm layer hight. Link…
Druck ohne Support und Rand möglich
Made a simple two finger pull you can glue onto your superglue lids to make it easier to yank them off when they inadvertently get glued on… Bob Smith Industries Insta-cure Cyanoacrylate Enjoy!
If you bought the Inventables Dust Boot adapter for your Supergrade Z axis upgrade from TBD CNC and accidentally crack the plastic piece this is my measured up replacement. Luke from TBD CNC said it was OK for me to distribute this here…
Holds 7 Mini-Superglue (Harbor Freight “Future Glue”) tubes. Tubes are ¾" wide and 2" tall (0.03oz / 1g).
Simple holder for standard line of Bob Smith superglues for the hexagon storage wall (HSW).
If you ever used the small 3 gram superglue tubes, you know it can be messy and painfull to use. This is an attempt to reduce the pain. This design went though at least 8 iterations before I called it done. I packed it features I thought…
Lobo’s Hook (Supergirl Movie) Prop Replica This hook is designed after the McFarlane limited edition prop. That one is cool, but as with all collectables, it is really just another thing to catch dust on a shelf. This one is one you can…
You can print without infill. Revision 1 2023-08-06: Added 1mm diameter, 28mm deep pinhole to store a pin for when you need to unclog the tip.
This holds 3 Bob Smith Industries 1/2Oz Superglue bottles and 1 2Oz activator spray bottle in a 1x3 Gridfinity bin About Gridfinity: Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman License: CC BY-NC-SA 4.0…
A simple 30.5mm diameter hole with a 1mm bevel in a 1x1 Gridfinity Refined block.. suitable for a hole load of uses, but designed to hold a standard superglue bottle or a JT16 glue stick. I kept it a fairly loose fit so there was no…
Holder for 3 glue bottles (30.50mm) and activator spray (53mm)
3-slot holder for tubes of superglue Slots dimensions: 25x20x60 mm, 20x20x50 mm, 20x20x40 mm
1x1 bin with a cutout that's just the right size to keep me from knocking over that !@#$ bottle all the time :). bin is 2u high and has slots for magnets. Print with extra solid bottom layers to make it more bottom heavy/more stable.
A simple holder for Biltemas Art. 36-4831 superglue with activator I've made it for multiboard, but since it's standard multiconnect, it should work with HSW and Ikea Skadis too, with the right snaps 0.2 Layer Height No support 3 walls…
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. DC - Supergirl Art Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size You may print at…
This is a drawer organizer to help keep my magnets, decal solutions, Badger air brush oil and extra superglue sorted. These are all things that I use for Warhammer 40k. The brands that it is sized to fit are easily seen in the picture. It…
SuperGlue Holder - can be mounted directly to a wall or attached to other wall systems w/attachments (french cleat, multiboard, honeycomb). Please NOTE that it is slotted for the smaller CA glue set - bottle (.8oz) & activator (3.3 oz).
This is a quick model that will old any bottles that are up to 40mm in diameter. It was designed Zap a Gap and Zip Kicker specifically. It uses the Universal Peg Board system for mounting.
I made this little holder as I was fed up with my glue clogging up the nozzle. Then I improved it by making it compatible with Gridfinity. Both models are included here.
I created a holder for the Everglue set for the skadis wall. It includes the activator 200ml and three bottles superglue. Support is required for the hooks. Print settings: Infill: 15% gyroid Layer height: 0,2 mm Filament: Prusament PETG
Will hold two 50g bottles of cyanoacrylate glue. I made this for two bottles since I have glue in two different viscosity levels (liquid & gel). The bottles are 38mm in diameter and fit in there with .5mm of clearance around it. The…
Super glue holder for SKADIS pegboard with honeycomb texture. Bottle size: 43x22.5mm Use supports only for the two pegs. I used manual tree. Feel free to ignore slicer if it wants to put support around any of the honeycomb areas.
Küpper EU pegboard superglue holder for 38mm bottles. Print Settings Printer: Flsun SR Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: GST3D PLA+ Black Post-Printing ============= Category: Tool Holders & Boxes
I simply closed the hole in the center (i couldnt fit a long enough screw through it anyway) and added a chamfer for SUPPORTLESS printing. This part is a remix from the Bird Temple by JobSmolders: Bird Temple by JobSmolders
While looking to design something new in Fusion 360, I notice I had serval bottles of brush on type superglue. I created a simple holder to hold two bottles each of the brush on Loctite brand superglue (5g) and the brush and nozzle type…
Easy printable superglue and activator stand. 0.2-0.25 mm layer height with PLA works great. You can easily change the parameters in the .3mf file, for different size containers.
Small bracket / holder in PLA for Superglue tubes (3ml). ~1 hr to print. Example printed in Polyalchemy Elixir Bronze 6mm hole in rear for screw mounting. Double sided tape would also work. Enjoy. Ps. If you print it and like it. PLEASE…
It is well known that after you open superglue, the best position to store it afterwards is the vertical one. I've create this for my own need and willing to share to others. You can scale this model to fit your needs even for bigger…
Print settings: Spiral vase mode 0.8mm wall thickness (standard 0.4mm nozzle) Single wall Original design file here if you want to modify:…
This cable clip was designed to perfectly fit the SuperGlue brand Pre-Cut Foam Mounting strips you can find at Dollar Tree. They're sturdy, quick to print, and require no supports. Also works great as a plant guide/clip! Print on it's…
A simple 1 bin glue holder to keep the glue from geting knocked down so easily. Made In FreeCAD's Gridfinity WB.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Multicolor done in HueForge, does not require AMS for multicolor print. Use the following color changes in the slicer: Start with Black At layer #8 (0.72mm)…
This is a holder for 2 bottle of superglue. It is based on the "Pegboard Tool Mount System" by eric-anastas. You can get the proper hooks for your pegboard from his design. It is sized for the Loctite brand "Ultra Liquid Control" 4g…
Simpel feet for Biltema Superglue bottle so it dosen't fall. You don't have to be worried that the open bottle is going to fall and mess up your creative space.
Simple Stand for Creative Superglue container. Instructions said to store upright, but it has a curved base :-}
