Counting matching models…
This is a lightweight mod for the Logitech M720 Triathlon. I measured a 30g difference on my mouse, and aftermarket feet make it feel even better but are not required. A bit of sanding may be required in the base's battery compartment.…
WARNING: UNTESTED I haven't printed it as my mouse hasn't arrived yet, so I'd be happy to get some feedback in the meantime! I am by no means a designer, just a tinkerer, so this could be rough.
This gasket improves stability by replacing the hinge with a fixed element with added brackets for a soft strap. The current version (V1), was modelled for my face shape so the fit may not be ideal for everyone. I include 4 variations…
potenza di raffreddamento potentissima al 100% della ventola penso sia addirittura troppo piega persino il filamento mentre fa i ponti ..perciò va ridotta la potenza ,ridotto al minimo peso ( 9,61 gr. )e volume tolto tutto ciò che non…
The “normal' base weighs 3,5g - 51g with the mouse and the ”stiff" base weighs 5,1g - around 53g with the mouse. It's janky, sorry, but it works and charges and stuff. Obviously for GPX 1, not 2. Dot skates are kinda bad on it, even with…
Please keep in mind that this only fits the GPX 2. Enable tree support for cleaner screw holes and easy removal. Can be printed out of any material, preferably stiffer ones, but still very usable even with PLA. Base alone saves around 8g…
. Print instructions Category: Outdoor & Garden
See the original model for instructions.
I remixed the original model to include the handy T-Clip mounting that I liked.
See the write-up on Reddit for more info: https://www.reddit.com/r/MouseReview/comments/1ie9z2i/logitech_mx_vertical_g_pro_x_superlight/
FINALLY FINISHED I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! Background Story This Model was initially made for school and then continued in my…
Meine Hand ist größer als der durchschnitt und die Maus hat nicht gut in meine Hand gelegen. Da ich an meiner Hand nicht ändern kann musste die Maus angepast werden. Die Maus ist im ganzen länger und hinten unter der Hanfläche an den…
Enhance the comfort and stability of your MeganeX Superlight 8K with this custom-designed front harness. It slides over the front of the headset and provides mounting points to attach the default soft strap via side brackets, offering a…
Neue Version mit Daumenauflage!!! Meine Hand ist größer als der durchschnitt und die Maus hat nicht gut in meine Hand gelegen. Da ich an meiner Hand nicht ändern kann musste die Maus angepast werden. Die Maus ist im ganzen länger und…
Cable Support to prevent bending or breaking the USB-C Port on the Breakout Box. To avoid getting a loose contact.
A compact and functional magnetic puck replacement designed for Logitech wireless mice, especially the G Pro X Superlight. This puck enables seamless charging with magnetic docks, offering a reliable and secure connection. It’s designed…
This is a lightweight mod for the Logitech M720 Triathlon. I measured a 30g difference on my mouse, and aftermarket feet make it feel even better but are not required. A bit of sanding may be required in the base's battery compartment.…
Modified the 25mm lid from @Snehulak to add AMS print capability for printing the G logo in a seperate color. The .3mf file was made with BambuStudio and printed using a bambulab printer - not sure if it will work with other printer brands.
After slicing several files to print a paint rack, I realized that most of them used a lot of material. I decided to make a model based on a honeycomb structure, leaving only the support bars. This is capable to hold 24 bottles of paint…
I made adjustments for those who bought charger with usb c connector on middle instead.
Welcome aboard. Design inspired by Kanrog's Kobra S1 bed frame. Actively managed and updated by IDOLABS, also on GitHub . I only have basic tools to build this - Easy assembly guaranteed. It shines more when you swap the board. I am on…
Project Overview This project features a custom-designed PCB , a connector arm that links Akari’s Facial Interface to the AVP Solo Knit Band or AVP Dual Knit Band and a cable guide for clean cable management on the AVP Band. Connector Arm…
This is my take on building the perfect gaming mouse. Just 27 grams, without sacrificing ergonomics. It’s based on the Logitech Superlight 2, and in my opinion, it carries the legacy that Logitech has built over the past two decades far…
Note! Additional magnet hardware required! For a magnet free version, with better cooling ducts, see my new hinging design here: SM-33 Hinging Lightweight ECC Toolhead Cover - Updated - No magnets required What/Why: First of all, in…
I did some tweaks and rescale the original Superlight using blender and eloshapes
WARNING: UNTESTED I haven't printed it as my mouse hasn't arrived yet, so I'd be happy to get some feedback in the meantime! I am by no means a designer, just a tinkerer, so this could be rough.
This gasket improves stability by replacing the hinge with a fixed element with added brackets for a soft strap. The current version (V1), was modelled for my face shape so the fit may not be ideal for everyone. I include 4 variations…
potenza di raffreddamento potentissima al 100% della ventola penso sia addirittura troppo piega persino il filamento mentre fa i ponti ..perciò va ridotta la potenza ,ridotto al minimo peso ( 9,61 gr. )e volume tolto tutto ciò che non…
I had a old superlight around and was inspired by the zero mouse to make a superlight fingertip grip shell, the design consists of 2 parts, the main shell and the click pcb holder. The shell is made to have no side buttons to save weight.…
This allows the mounting of the excellent Koss Ksc755 or Porta Pro drivers to the hard strap available for the Meganex 8K superlight. Required Materials Two M5x20mm screws with nuts (locknuts are best) Some thread locker if you have no…
I do enjoy solderiong my long-range batteries myself. These spacer are very helpful when putting them together and provide protection against shortages in case of a crash. All version that i found on here were too heavy for my taste - as…
I do enjoy solderiong my long-range batteries myself. These spacer are very helpful when putting them together and provide protection against shortages in case of a crash. All version that i found on here were too heavy for my taste - as…
Version 2 has been released! It has been much improved upon. Find it here: https://www.printables.com/model/408649-tubular-6inch-v2-freestyle-frame-superlight-and-su -------------------------- This is the 6" version of the Tubular frame…
Update 03.05.22: I beefed up the clamps a bit, so they are more rigid (parts 01-04). Rest has not changed. Note: This frame is work-in-progress. While the basic principle has proven to work perfectly, the "official" 7" version i'm still…
This is the 8" version of the Tubular frame. 6" version: https://www.thingiverse.com/thing:5368370 7" version: https://www.thingiverse.com/thing:5365636 If you plan on building one or would like to get more info, there is a Discord server…
This is the 5" version of the Tubular frame. It is based on the same design as the 6" and 7" version, however i have worked hardly on making it as crash-resistant as possible - while keeping the weight down. 6" version:…
This is the v2 of the 6" version of the Tubular frame. The v1 was my first frame of this type, and i had an amazing time with it. Since then, the frame design has been much improved, so this version incorporates them all. i have worked…
Update [23.7.2025] added versions for 25mm and 20mm long screws. *Added at the request of @SamC_3382651, I haven't printed them personally, but they should work without problems. Hello. I have a Logitech G Pro Wireless…
If you want to use Klicky together with SuperLight Fast-Swap carriage and Gaping Maw and perhaps even openfront tensioners mod such as this one , you might want this. There's other mod for this, but it doesn't fit to me for several…
I always wanted to print my own Mouse Feet Skates so as soon as i bought my Bambu P1P I decided to measure my Logitech G Pro X Superlight mouse and make it happen :) This is the first version (and probably the only one) I've created for…
Please note I designed the Superlight print heads several years ago. They were a great upgrade back then to the EVA print heads. My newer and highly recommended Microlight print head is a far superior design.…
Please note I designed the Superlight print heads several years ago. They were a great upgrade back then to the EVA print heads. My newer and highly recommended Microlight print head is a far superior design.…
Please note I designed the Superlight print heads several years ago. They were a great upgrade back then to the EVA print heads. My newer and highly recommended Microlight print head is a far superior design.…
A minimalistic fan shroud for the Rat rig V-Core 3 to stop you putting your fingers in the hot end cooling fan...and breaking the blades. Works with EVA version 2.X, EVA 3 and SuperLight Fast-Swap print heads. Coffee fund If decide to…
Please note I designed the Superlight print heads several years ago. They were a great upgrade back then to the EVA print heads. My newer and highly recommended Microlight print head is a far superior design.…
Gridfinity baseplates completely remodelled from scratch, designed to minimise print time. Designed for PLA and other materials with good first layer adhesion. You may need to add a brim to print with ASA/ABS. Sizes 1x2 to 5x5.
This is a replacement scroll wheel for the gpro superlight v1. I would recommend printing this in resin if you do decide to print Category: Other
I really liked MFBS's toolhead in my V-Core so I thought this excellent design would fare well on V-Minion as well. We can now enjoy excellent mix of rigidity and weight on cartesian as well. The STEP file contains multiple files and two…
2 x 3 gridfinity holder for the Logitech G Pro X Superlight.
I've recently encountered some technical difficulties with Printables and Stripe, which means I can't sell the complete version of this model with the screw holes right now. I'm actively working to resolve these issues and hope to set up…
at the moment this design just barely works, but i do intend to upgrade and make it much easier to print and assemble. ASSEMBILY: dissassemble g305 hot glue mouse clicks into holes on pcb (look in photos for reference) screw pcb board…
To make this model easier to print I seperated the hook from the actual holder an just superclued the together.
This hard case is designed to protect the mouse when going out with the laptop and G PRO X I printed this with P1SC You need 8 magnets. (10mm x 3mm) To add color to the logo, You need AMS or ERCF Here are two versions available: one with…
Logitech G PRO Superlight Wireless Charger You need to purchase these two items. https://ko.aliexpress.com/item/1005003502292414.html?spm=a2g0o.order_list.order_list_main.4.45ba140f0zPm9o&gatewayAdapt=glo2kor…
When the mechanic handed me the used sprockets and chain, I thought it could make a really cool coaster for a mug or cup. So I took the sprocket, the logo of my bike's manufacturer, and here it is.
![[IL.00 | K1SL] Creality K1 / Max Superlight Bed Frame](https://media.printables.com/media/prints/33487bd5-4c8b-4bee-a8de-80c4ceef478d/images/11567964_7680d05f-fcae-4248-a30d-b1034d02d72c_4b4f0a47-6e2f-4e3c-a28c-a4c0dffdb619/imiji_2025-12-31_130803295.png)
