Counting matching models…
Resized to fit the Sylvania family bunnies this sofa chair prints well, looks soft, and adds a ‘lived in’ look.
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
A wonderful round table will serve as an excellent solution, both for spending time together at home, and for creating a small (or LARGE) cozy cafe! Round table erfectly complement the collection of garden furniture ! Compact and cozy,…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
They asked me if i can make a playground for the Sylvanian family. This was a quick build in Tinkercad, and printed fine, the bridges could me better. i have still to print a temp tower ;) Print instructions i have printed this on the…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
A table with chairs for ‘critters’ with tails. Our dollhouse is inhabited by Sylvania Family-sized bunnies and this set was built for them. Around a 1:16 scale, the chairs print with minimal supports. The design allows the critters to sit…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Was asked if I could create a small table to replace a Sylvanian Families table with a broken leg. The one I made is not the same style, but it's the appropriate size and I was quite pleased with the result. But what good is a tiny dining…
🇺🇸 Welcome to Pennsylvania, USA Fallingwater is a house designed by the architect Frank Lloyd Wright , built in 1936 partly over a stream and waterfall in southwest Pennsylvania, about 70 miles (110 km) southeast of Pittsburgh, in the…
A crown of pale grace, shaped like intertwined antlers and thorned branches. Forged in the stillness of ancient groves, its soft white hue speaks of purity, balance, and the quiet strength of nature. A perfect relic for those who walk…
Sylvanian Families Wardrobe. I printed this in PLA. Print the main body on its back facing up, supports are needed for the inside top section. Print the doors flat on their back facing up, no support needed. Once printed the doors pop in…
I made this as my kids had lots of characters but only one bed. prints in 4 pieces then either pushes together or you can glue in place depending on how your print tolerances come out. Printed on MK3s+ at 0.2 layer
Surely you noticed the hole in the center of the round garden table ? It's there for a reason! Meet two additions that will expand the capabilities of the table! Protect a covered table from rain or sun? Easy as pie! With an amazing…
Sylvanian Families Piano. I printed this in PLA. Print the main body on its back and it won't need supports. The lid prints flat and glues to the main body. the keyboard keys print flat, I did 3 colour changes to achieve the 3 different…
Feel like the King of the Garden! Light chairs will perfectly complement the collection of garden furniture ! Compact and cozy, they will fit into any interior! Also compatible with mini 13 figures ! It prints easily and without supports.…
3d miniature of Philadelphia, Pennsylvania! Collection of all my miniatures: https://www.printables.com/@jarvizar/collections/1124416 I have many other exclusive miniatures available for free on MakerWorld ! Slicing & Printing Details…
My five year old niece doesn't think Sylvanian families are the cutest thing ever, so I'm making it my mission to change her mind. Picked up a few of the babies and wanted to make her a little house for them. I made it modular to fit my…
A tea cart for Sylvanian familiesor possibly Playmobil with working wheels. Includes two parts, cart and wheels, where the wheels can be snapped on. Read more at: https://enelys3d.netlify.app/The_Teacart/ The "Cakes and biscuits" set (…
Sylvanas Windrunner from Warcraft rumble, provided by Blizzard https://warcraftrumble.blizzard.com/en-gb/collection
Pennsylvania, USA (PA) Topographic Relief Map with Rivers and Coastal Waters Pennsylvania, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
A practical and reliable table for a large family. A great reason to gather the whole family for a tea party or barbecue! It prints easily and without supports. The simple design allows you to assemble the toy in a matter of minutes.…
Sylvanas from Warcraft universe, nendoroid stile
Hey we've got to have tokens now. You can use this! Should work however way you want to print it.
Recreation of original staircase for Sylvanian Families doll house. My sister got a second second-hand Sylvanian doll house with some stuff missing, most importantly the staircase. Print on the side with supports. Project file .3mf…
A bench with a back! How nice to sit back and relax on the bench! It prints easily and without supports. The simple design allows you to assemble the toy in a matter of minutes. Depending on the type of plastic and the settings of your…
The helmet is designed for a Sylvanian Families adult size and child size cat.
The helmet is designed for a cat and a koala of approximately 5 cm. The shoes are for all sylvanian families with an approximate size of 5 cm.
Count Dracula of Transylvania Bust | Vlad the Impaler Spent many hours re-sculpting this model. I really hope that you enjoy it. I have included both the 3MF “full color” file and the STL file. It would really be cool if you could “like”…
Overview Every Sylvanian village needs a playground! This Nest Swing is designed to be sturdy enough for actual play while looking great on display. Unlike standard swings, the "nest" design allows multiple small figures (like the babies…
This 3mf file has it printed on its side. Note if printing on side, you have to sink it into the printbed else the protruding “screws” will cause the model to float above supports. Since this is a zero contact support with PETG for…
Hi! I made a simple home for our Sylvanian families. Joint is realised with filament 1.75mm. Work is still in progress, but this first version is playable. First print is in testing mode by two small children. Please, place here some…
World of Warcraft Slyvanas Bust
A coffee table made for my daughter's Sylvanian Families cottage.
A set of things fitting to Sylvanian Famelies ( https://www.google.se/search?q=Sylvanian+families&newwindow=1&rlz=1C1CHWA_svSE594SE594&es_sm=122&tbm=isch&tbo=u&source=univ&sa=X&ved=0CEwQsARqFQoTCMnWqLnBhcgCFYjnGgodb7UHMA&biw=1361&bih=886…
Pennsylvania Railroad X23 Boxcar, built from 1917 to 1919 and lasted until the 60s. Remixed (reverse engineered) from The-Cogman's NX23 Caboose on Thingiverse https://www.thingiverse.com/thing:5428163 You will need to source your own…
HO scale Pennsylvania Railroad full dormitory car class PD70R. Sleeps 42 crew members/porters. Two showers, three bathrooms, five sinks. Designed directly from blueprints from…
Sylvanian Families microphone & stand. I printed the microphone standing up with a colour change. The stand prints in 3 pieces. the pole glues into the base. the microphone holder is attached to the pole with a piece of 1.75mm filament…
Someone was upset that their Calico Critters "Mother" and "Father" didn't share a bed the way their own parents do, so I modeled this. The bed is still a little on the small side but both Calico Critter "parents" will still fit and…
I made this 3D print with old “wood” filled PLA. It was extremely stringy…but I like it.
How many characters can you put on one bench!? A good addition to the garden table! After the party, the benches can be removed under the table! It prints easily and without supports. The simple design allows you to assemble the toy in a…
A little ferris wheel for Sylvanian Family , the file can be scaled , for version in picture i use 75% scale , full version can keep from child to adult caracter. After printing you need some cleaning and glue/superglue to put togheter…
Horse Express cars were used to transport racehorses, racing teams could transport their horses as if they were luggage. Pennsylvania Railroad had roughly 30 of them that they leased to private stables and racing clubs. They traveled…
Includes sink, stove, oven, and countertop space. Sized to be about the equivalent of countertop height for a human to an adult calico critter. Prints without supports. Kitchen is 124 mm long, 30mm deep, and 30mm tall.…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical…
A Chair for Sylvanian figures or a dollhouse. Assembled from three individual parts.
[English] Sylvanian musicians definitively need a concert hall ! I design it for my daughter birthday. You can glue 4 magnets (12*5 mm) in the dedicated holes to easily assemble the two parts and disassemble them at time to tidy up.…
35x35x35 End table, made to match the coffee table for my daughter's Sylvanian cottage
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
An NPC from Tomb of Annihilation. This is a relatively simple model for an NPC that draws in the party to the adventure. I didn't find a lot of good examples for Archmages or older/retired adventurers like Syndra so I made this one. Could…
28x33x35 My daughter needed a bit more workspace in her kitchen, and this fit between the oven and sink units.
Simple bat from hotel transylvania
First, print the base plate. After printing the base plate, do not remove it. When printing the head image and slicing the head image, raise the coordinate height by 0.2mm to better print on the base plate. The base plate can be in…
Two companies of Massachusetts sharpshooters, a rarity in the American Civil War, fought as independent units attached to other commands. The 2nd Company of (Governor) Andrews sharpshooters was attached to the 22nd Massachusetts Infantry…
The monument to the 74th Pennsylvania Infantry is a rarity in Civil War statuary, depicting not a fighting soldier or a marching soldier, but one in the throes of death. In a pose based on the popular "Dying Gaul," a widely reproduced…
Forest vibes, serious side-eye. This tiny elven guardian patrols your desk, dice tray, or display shelf with a leaf-crest shield and a “don’t try me” smirk. Cute enough for a planter nook, heroic enough for your next tabletop…
I made molle tags for PA and WV. Easily printable with two colors and if you acetone smooth them they look even better.
Baseplate for the Fallingwater - Pennsylvania, USA - model! => https://www.printables.com/model/546440-fallingwater-pennsylvania-usa
This is a model of my great grandparents home in Bethlehem, PA. Designed in tinkercad
Stay Alive - Swink Sylvania (Frankie Muniz) & Hutch Macneil (Jon Foster) - 2006 3D printable model.
Insert for Ticket to Ride Map Collection 5: United Kingdom & Pennsylvania V.2 Print the indicated number of parts. When assembling the part where the top slides to, must be towards the center of the box. This way it will be impossible to…
Symple hooks for Sylvanian dolls. Ideal for hanging elements to others (department stores for example) If you like my creations and want to support me, you can offer me a coffee https://ko-fi.com/nayb87 Print Settings Printer Brand:…
Overview Add a little fun to your miniature world! This is a simple, two-piece sandbox (sandpit) designed specifically to fit Sylvanian Families (Calico Critters) figures. It consists of a sturdy outer border and a separate "sand" insert,…
Simple keychain blob from Hotel transylvania
Easily light up this sign with a light strip. Hang on a wall, or sit on a table for decoration.
This Position Light model was created to resemble position lights of the Norfolk and Western Railway with short hoods of just over 11 inches. Although the Pennsylvania Railroad also used these types of hoods as well. This light box is…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical…
Another relatively simple to print piece of Sylvanian Families scale furniture, this one is intended as a kitchen cabinet but of course the only limit is your imagination! My sample model was printed in some “skin” coloured PLA, I expect…
Insert for boardgame Ticket to Ride Map Collection: Volume 5 – United Kingdom & Pennsylvania - sleeved cards If you do not own a 3D Printer you may order it on https://3dprintforgames.etsy.com/
fortified remix - the original slide was to fragile for me. i printed it on the side with tree-supports, 0.2 resolution and 100% infill. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes…
Pinnacle, or finial for a mast that goes on a railroad signal. It is for 5 inch mast, but can of course be scaled to your liking. Category: Buildings & Structures
pequeño llavero de sylvannian families
Tested on Prusa Mini using 5% infill 0.15 Layer Height 0.2 First Layer Height Print all parts separately and glue the letters in the spaces. Please note - this box is not able to store the game board Please note - this box does not store…
This is a light lens, or roundel used primarily by the Pennsylvania Railroad in their position light signals and Norfolk Western used these lenses until 1959 when they started upgrading their lenses to color lenses, aptly name Color…
Overview Complete your playground set with this simple miniature shovel! Designed to accompany my Miniature Sandbox , this shovel is scaled perfectly for Sylvanian Families (Calico Critters) and other 1:12 scale figures. It is a quick,…
uploaded rails from cults free
Warning None. Definition None. Printing Is required the same printer size than 3D SETS has defined. Use the same setting than 3D SETS Licence Plates for the modified License Plates (0.2mm for the first layer and for the following 0.15mm).…
This is a replacement bracket for the Sylvania Single LED Battens which come in varying lengths. This bracket can be used to mount these lights against trusses making them useful for mounting in lofts/attics, as the original bracket only…
4.5" tall Pennsylvania Railroad keystone logo. Flat back to allow for multiple mounting options. For non-AMS multi-material, change filament at layer 17 (for 0.2mm layers).
Something to help with the cover removal of Sylvania Lightify Smart Sensor Motion and Temperature Indoor when changing the battery. Place the tool over the slot hole for the latch, squeeze it against the sensor cover and pull the sensor…
Sylvan Ursine / Forest Guardian Bear Miniature Bring the ancient power of the forest to your tabletop with this detailed 3D printable miniature. Blending raw, primal power with nature magic, this model features a hulking bear fused with…
Made for Ankermake M5C 0.4mm nozzle PLA filament
The mount is a snug fit in the bottom of the ceiling. Printed with a Prusa MK4S from ESUN ABS+, 0.2 mm layer height, 0.4 mm nozzle. No support or any special setting needed. Source Fusion360 file also uploaded - feel free to alter the…
Mount it with a screw or tape
This is a loading arm replacement part for the Sylvania SSC190 VCR. It should also match the Funai MK9 family of VCRs. This includes a pre-configured for PETG Bambu Labs file as well as the STL. Print at 45 degrees to prevent stripping…
Fits the roof of this house: https://makerworld.com/en/models/1283991-dollhouse-two-floors-compatible-sylvanian-families?from=search#profileId-1538100 Modified it in tinkercad. Needs glue to hold it in place thanks to @Kowa_1662648 !
Sandbox, shovel and bucket for sylvanian families. 2 walls and 7% infill is good. Bunny is not included :)
Sylvan pools have a 2.75" discharge into the pool. They have a 90-degree diverter that causes a “swirl” in the pool. This diverter fails after enough years, and appears to be unavailable. This is a replacement. The dimension/shape of the…
Made with 1 meter topography data from the USGS 3DEP
When the kids ask, I design and print... Here is a Sylvanian Families microwave oven and a small, IKEA-style table for it. Our little bunnies love to cook, so they need some kitchen accessories! Two walls are sufficient, and PLA works…
Made with 1 meter topographic data from the USGS 3DEP data
Made using 3DEP 1 meter topographic data
Made from 3DEP topographic data
I made this years ago, so it's a little clunky, but does the trick. I've smoothed out the back to have a curve since it worked better for my various skull-related projects to have it like that. The images are of the skulls for my…
Made using 3DEP 1 meter terrain data
Made with 3DEP topographic data
2 different covers to minimize the field of view of the motion sensor.
Photobooth model for Sylvanian Families. Material: PLA. Two material colors. Time: 20 hours for two units.
Simple ikea style sylvanian families bunk bed and detachable ladder. If you print this, please share a photo.
Designed for multi material (MMU) printers. Discover more of our incredible designs: https://StarLabs3D.com See our design process in action: https://www.youtube.com/@StarLabs3D
print in place print with supports tested with petg bed temp is 245 extruder temp is 80 model height is ~80 mm, simular to original model (I dont know exact height of it)
