Counting matching models…
This is a remix of Andy Barnett's TFT35-E3 bezel from thingiverse: https://www.thingiverse.com/thing:4177691 I flattened the top of the bezel, so its looks nicer. Print instructions Category: 3D Printer Parts Summary I flattened the top…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
I remixed @Si_Gowla design with tighter tolerances and more attractive aesthetics. It allows quick access to the back of the TFT35 main board. No case mods needed. Filament: PLA Layer height: 0.2mm (knob shroud 0.1mm) Infill: Grid 15%…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Bugatti Typ T35 Grand Prix, 1924
Print approx. €5.20–€6.35 excl. taxPreliminary estimate for PETGSource material: PET
This mounting bracket was designed to make using the projector easier in temporary setups. The ubiquity of ¼"-20 screw support solutions in the photo/video industry makes it simple to find a quick place to mount a projector. Gorilla pods,…
Print approx. €6.38–€7.79 excl. taxPreliminary estimate for PETGSource material: PET
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Requires two screws, 6-32 or M3.5 any length between 8mm and 30mm. Second version, 3 parts with 5mm in the title, Fits M5 screw 8mm+ in length. Uses the same clip. Removable stand, can be doubled up for a kickstand or used single for the…
Edit 3/12/23 0800. I think I finally got to a version that prints without a bunch of weird settings and crazy supports. This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative.…
This is a Pivoting Display Mount for the BTT TFT35-SPI V2.1 The pivot assembly is spring tensioned to apply friction to the mechanism. I have repurposed an old bed levelling spring for this. A reasonably sturdy spring with a minimum ID of…
The CheaPad : the most affordable DIY Klipper Pad ! Let me introduce The CheaPad, an incredibly cost-efficient alternative to all the Klipper pads out there! 🚀 I'm excited to share this minimalist yet highly functional solution for 3D…
User Smuk3d asked me if i could create a version of the TFT35 Voron 0.2 housing that moved the viewable area of the screen to center, and allowed for a more symmetrical bezel. It was alot of work and required a 90ish percent redesign of…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
I recently put klipper on my ender 5 pro and wanted the same user experience on my ender 3 pro. Ordered the bigtreetech manta E3EZ board with cb1 and a TFT35 SPI V2.1 screen. There was no housing for the screen available at the moment so…
This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative. The CB1 has the drivers for this display built-in. The Screen sits a couple millimeters below the level of the housing…
This LCD cover is to fit the Big Tree Tech TFT35 V3.0 on a MK3/S Bear frame. In this design the supports are held in by 4) 3mm x 8 screws, which also hold the board in the cover. Trying to think of a better way because there isn't much…
This mount allows you to install the awesome case made by JimbalNy. ( https://www.thingiverse.com/thing:4153427 ) I installed it on my Ender 5 Plus, but it should work on the CR 10S PRO V1 or V2. It uses the same bolts mentioned. If you…
Disclaimer: I used BTT's CAD model and the Voron 0.2 CAD models for dimensions. I don't own a Voron 0.2 or a TFT35, but Printables member Eric Ebert, who assisted with many of the features of this design Printed and test fitted a couple…
Once again another awesome print from the 3DWarehouse https://3dwarehouse.sketchup.com/model.html?id=ufb4f2162-ecf7-47af-a6b0-0f4df5e2ddc6 There are still a few errors in these files that I was unable to repair. Ideal for some one with…
as most of rc cars found online are difficult to print i made this car printable
can be printed together or separately in other colours the Mustang is very realistic Print in place kit card , Assembly required need to use a support
WATCH THE VIDEO BELOW TO UNDERSTAND HOW TO USE THESE PARTS THIS PAGE IS FOR THE PARTS COMPATIBLE WITH THE CR-10 SMART. YOU CAN FIND MY “EASY SWAP” PCB KIT HERE:…
Bugati T35 year 1924 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
Here is a superb TFT35 Bigtreetech LCD design for the Prusa Bear SKR project The rear arms are fixed to the bear frame with 4 M3x10 screws Important : Layers = 0.2 Perimeters = 0.2
I haven't got to print this model yet as my printer is still a WIP, but it should be printable without support as the original design. Case can be printed using Voron PIF standard, but I recommend printing the bezel and accent with finer…
I remixed the case by qwert29 due to a few issues with my board not fitting correctly as well as adjusting for minor cosmetic changes. Front: Add 1.5mm inside right so that it ensures that the displayed screen is perfectly aligned, no…
This remix was requested by Stefan Raatz , who desired a case for holding an SKR 1.4 Turbo (instead of SKR 1.2 Pro), as well as a Raspberry Pi 4 model B. Quick heads up: These remix designs were somewhat “intended” for the case being…
Couldn't find a nice basic case so I designed one from scratch. Holes for SD and USB. Not sure if there is clearance for ESP-module or other cables than the flat cables shown in pictures. Screwholes sized for 3 mm screws.
Enclosure for BigTreeTech TFT35-E3 dual-mode screen, for replacing the standard display on the Ender 5 Plus . Requires a total of nine M3 bolts, 8 mm minimum length M3 × 8 mm (or longer - up to 12 mm) ×7 – four for holding the TFT35-E3…
It all snap fits into place but I strongly advise bolting it down if you're gonna move it around often or will put it somewhere it might fall. The top piece needs supports for the bottom of the screen hole The 4 holes on the side can be…
BIGTREETECH TFT35 E3 V3.0 without logo (4 holes drill yourself to your size )
This is a display mount for a BTT TFT35 SPI to a V0. Two parts in total, around 1,5h print time. No supports, you still need to arange them yourself; Cover (stl name v02_spi_display_1 and blank) on its face and the mount itself standing…
This remix was requested by Miguel Arellano , who desired a 75 mm extension of an existing control box's lid and base, in order to house a Raspberry Pi 4 model B, so he can run Octoprint. Quick heads up: These remix designs were somewhat…
This includes an arm and a case to hold a BTT TFT35 V3 LCD screen for your Rat Rig V-Minion The arm requires: 2x M6x12 2x M6 T-Nut 2x M3x8 or M3x10 to attach the case to it The box is a very snug fit, so make sure your printer is dialed…
THIS PAGE IS FOR THE PARTS COMPATIBLE WITH THE CR-6 SE. YOU CAN FIND MY “EASY SWAP” PCB KIT HERE: https://embracemaking.com/products/cr10-smart-cr6-se-mainboard-easy-swap-pcb-kit The Creality CR10 Smart and CR-6 SE are platforms that have…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
3D printable enclosure for the BigTreeTech SKR-Pro v1.2 controller and TFT35 v3.0 touchscreen LCD Project Repository Link Head to the project repository for the latest revision of this model along with full assembly instructions and CAD…
This model by Ken226 has been recreated to provide STEP and F3D files, as these were not provided with the original post. All renders and the STL files were created exclusively by Ken226; I take no credit for the original design. Ken's…
This is a quick remix of the Original Prusa LCD cover for the BTT TFT35. This is a quick, need it in a hurry remix, so not perfect, but looks and functions well. I did not find any other option out there and this cover also clears the…
Support pour BTT TFT35-SPI V2.1 pour profil 4040 comme la ENDER 3 Version 2.0 support plus épais.
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
I designed A Case to house your BigTreeTech Pi while being connected to an 2.5 inch SSD drive. It also features a Bezel that houses the BTT TFT35 spi for Klipperscreen which you can connect directly to the BTT Pi. The model is designed in…
An adapter to replace the native 2.8" Touch Display by the Bigtreetech TFT35 with SPI connector. Used for this Display: bigtreetech-tft35-spi Includes a front and a back part. Just print them, they will fit tight into each other and so…
This is a screen back cover for the BTT (Big Tree Tech) TFT 35 V3.0 for the ender 3 and ender 3 pro. You will need 4 M3-16 button head screws. Print with supports.
Remix of Adimlab center mount LCD case (original version by Electroskippy) to fit a Bigtreetech TFT35 E3 V3 hybrid touch screen. Mount to center of printer using 2, 4mm x 10 screws and 2, 4mm extrusion nuts. Category: 3D Printer Parts
I like both of my printers. Both the Prusa MK3s+ and the Ender 3(V1), which has accompanied me since the beginning of my experimentation with 3d printing. I like to modify my ENDER 3 all the time. I like the look of the display cover on…
built in supports and simple to print BOM 4 M3 hex nuts 4 M3x8 bolts 2 M3x10 bolts 1 BTT TFT 35 SPI Screen
This is a Remix of Voron Switchwire BTT TFT35 SPI V2.1 Housing made by Ken226
This is a case for the BTT TFT35 E3 V3 touch screen. It mounts to a 4040 extrusion and uses a ball socket with a nut to adjust the tilt and angle of the display. Openings are provided on the side for the USB and card slot as well as for…
This Mustang Shelby GT350 Silhouette wall art will give your office, room or garage a unique look that will catch attention to any racing, car enthusiast and will add a subtile touch to your home design. This could be a unique gift to…
Build your own 1:50 scale Ford Mustang Shelby GT350 (2015) from a 3D-printed kit card. Print the card without supports, separate the parts from the frame and assemble your miniature Mustang. Keep it on your desk, add it to your car…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
This is a case for the BTT SKR Mini E3 and the associated TFT35-E3 V3.0 which are originally intended as exact physical fit upgrades for the Ender 3 and related printers, to use them on other printers with 20mm pitch v-slot or t-slot…
INTRODUCTION For those who are using BTT's boards (certain controller boards and especially the BTT Pi) that support the SPI screens, we now have a screen mount for you. It uses the original Switchwire skirt so no other printed parts are…
Ender 3 V2 front case for BTT TFT35 SPI no support needed, but you do need to tap the aluminum extrusion to accept screws
UPDATE 31/12/2025 - Uploaded .step file Needed an enclosure for my BTT Pi and TFT35 SPI to fit my Ender 3 v1 while keeping the original casing for the control board. Printed in Esun Matte Black PLA but ABS or PETG would be better. BOM…
This remix was commissioned by a fellow V1E maker, Deadlystrike (username on Printables). Also, this listing's lid got remixed without the hold on top for TFT, as requested by a fellow V1E maker, @Mike_2205479 :…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is a mount and cover for the BigTreeTech TFT 35 V3…
NOTE: You will need a longer cable to reach this location. The one supplied with the screen is very short. The FPC should be reversed, with the contacts on opposite sides of the cable. Use 4 M3 heat set inserts to attach screen. Screws…
Got sick of opening up the flimsy case of my printer so I decided to make an all-in-one external case for this bundle of components that works great from Amazon: https://www.amazon.com/gp/product/B09MYT45BQ I added the power supply and a…
WARNING : This Upgrade requires you to basically gut your printer and rebuild the electronics from scratch. As such, it is recomended for Advanced 3D Printer Users with some electronics skills only. If you would like to keep your OEM…
Creality CR-10 upgrade: BTT TFT35-E3 V3.0 Display Touch Screen Two Working Modes https://biqu.equipment/collections/lcd/products/btt-tft35-e3-v3-0-display-touch-screen-two-working-modes
Adapter to mount BTT TFT35 SPI V2.1 instead of MKS TFT35 display. (FlyingBear Ghost5, TwoTrees Sapphire Plus, etc) You will need: x4 M3x5x4 heat inserts original M3 screws x4 M3 screws with 8-10mm
Diseñe está cubierta para la pantalla TFT35 E3 V3 de mi Ender 3 pro, quería un diseño con el cual pudiera proteger todo el sistema junto con el adaptador Wifi, además quería que tuviera una estética aceptable para mi gusto y que me…
Print in your favorite fillament. Infill doesn't matter as the case is thin. Use threaded inserts in the two mount holes and secure from behind the Switchwire's OEM panel mount. Update 5/29/23 : The panel sat a little high and interfered…
I really liked the idea of DavidETurner's original mount, but I've never been a fan of Creality's Ender branding. Unlike the other remix to this, the only thing I've done is removed the logo-- I didn't move the frame for the LCD-- the…
I made this to Mount the BigTreeTech TFT35 on my Davinci 1.0. If installing on the davinci you need to cut a 60mm high and 157mm long rectangle in the front of the case where the old screen was. If not you will need to come up with your…
Ender 3 BTT TFT35 E3 V3.0 cover with accsess for WiFi and filament sensor ports.
This is a remix of the design of Luke700. It was lacking some openings for the various connectors on the display. I have just imported the original model and added configurable options for -Wifi -SWD -Extra-connectors: Power, PS-On,…
simple screen for the TFT35 SPI by BTT you need : X4 M2X5mm and 2XM2 15/20mm to block the screen in place, printed face down with no support . Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No…
This very simple box allows you to cover the Esp01 Wifi module on the TFT35 screen. Print instructions Category: 3D Printer Accessories Summary This very simple box allows you to cover the Esp01 Wifi module on the TFT35 screen. Print…
Hub cap for LT35, all years Print Settings Printer brand: Creality Printer: CR-X Rafts: No Supports: Yes Resolution: 200 Infill: 30% Filament brand: SUNLU Filament color: Black Filament material: PET-G Notes: Perimeters(Wall Line Count): 6
My take on a mounting bracket for the BigTreeTech TFT35 v3.0.1 (https://biqu.equipment/collections/lcd/products/bigtreetech-tft35-v3-0-display-two-working-modes), since the others I tried didn't quite fit right for me Included are…
适用于 VORON 的 FLY pi lite2 和 FLY TFT35 支架
As I upgraded my (till then stock) CR10 with a BigTreeTech SKR 1.4 Turbo, their TFT 35 touch display, a filament runout sensor and a BLTouch I went and designed a case to take all the electronics (including the CR10's stock power supply…
This clip is made to fit the LowRider v4 CNC and the TFT35e3v3 case . It pairs very well with the SKR pro case .
Slightly modified version of https://www.printables.com/model/1239450-ender-3-btt-pi-12-enclosure-case-tft35-spi-screen
This is for mounting a BigTreeTech TFT35 E3 V3 (Originaly designed for ender 3) with cutout for SDCard and USB port. Hardware Required: 4 x m3x8 screws 2 x 4mm T-nuts with 2 x 4x8 screws when it's printed take a 2,5mm drill bit and drill…
This is an antenna mount for the 2.4Ghz ExpressLRS antenna for the GEPRC Smart35. It can be used on the back or the front, depending where you mount your receiver and the length of your antenna cable. It may work on other frames but it…
Bezel remix to cover the touch screen traces, from the original design to clean it up. The mount is fantastic but the original designer did not have a display on hand when modeling.
I was looking for a cover / holder for the BTT TFT35 SPI display, but all of those I found were lacking in some way, shape or form. So here's my take on it: This cover attaches where the existing Ender 3 attaches, but the screen…
UPDATE 27/1/2020: Enlarged USB opening on Back Case Right side mount for Bigtreetech TFT35-E3 v3.0 dual-mode controller. You can have a traditional 12864 emulated LCD controller, or use the touchscreen, and switch back and forth whenever…
Simple snapfit cover for BTT TFT35 screen. No hardware needed, no supports needed.
Bigtreetech TFT35 E3 V3.x.x factory sheet metal style LCD mount As the BTT TFT35 E3 doesn't like the factory metal LCD mount. I have made it in plastic, with the reset hole. I have also made a screen cover. The Factory LCD does fit as the…
Fits the Bigtreetech/BIQU TFT35 v3. No supports needed. Use M3 screws and nuts to attach the lcd and M3 screws on the top. It'll spread the plastic tabs and lock it in place. I did 4 walls. Infill to taste. Print Settings Printer Brand:…
Enclosure for BigTreeTech TFT35 v3.0 for my project of custom build CR10 S4 https://www.thingiverse.com/thing:4333962 More questions? Don't want to miss any announcements? Do you seek support?…
Fixed the gaps in the model via Fusion 360. Remix of emtrax's great model. Edit: If your model is too big, set scale to 1:10 or 1/10th of the size. On some models, fusion makes them 10 times bigger than the actual size, for some reason..…
This is an electrical fence insulator that can be used on existing fences using T35 poles. The insulator slides on the T35 profile, and can be fixed with a wire using the groove. It should be printed in any material that will support…
An arm protector/skid for GEPRC Smart35. To print in TPU. It's designed to print without supports, just lay it down on the angled flat surface near the bottom of the protector (look at picture here of the model in Superslicer)
I designed a Voron 0.2 / 0.1 PSU DIN Mounting System that uses the Voron 0.2 Bigger Skirts mod. I also wanted to add a screen. Because my Formbot V0.2 kit used the BTT Pi, I had to use a a SPI screen. I ran across the BTT TFT35 SPI V2.1…
I originally designed this case for my Anycubic Mega Zero v1, but it'll work on any printer and use either the original Mega Zero v1 LCD or the BTT TFT35-MZ Colour LCD. It includes space for a 40x40x20mm (or x10) 24v intake fan which I've…
Made my own version of the box for the TFT35 v3.0 screen
This started as a basic remix to remove the need for supports and turned into an entire redesign. I had started with the STL since it was going to be a quick remix, so I don't have a STEP file, but I plan to redo my changes in Fusion 360…
This screen case was designed to mount the bigtreetech tft35 v3 to an enclosure. Uses all m3 bolts. Enjoy!
I'm upgrading a CR10 Pro v2 and want the control boards outside the “heat zone” when I build the enclosure. I bought the listed boards and designed this case from scratch. There are two holes for easy wire inlet. Each board has slots for…
A case for the BTT TFT35 E3 v3 that hinges inwards for easy transportation. Parts to Print: Bracket x 1 Case x 1 Cover x 1 Button x 1 Spacer x 4 Hardware Required: M3 x 25mm Screws x 4 M5 x 15mm Screw x 1 M5 Locknut x 1 Alternatively, you…
Updated: Fixed Back Plate: Some of my supports collided with the connectors on the screen. Some plugs are deeper/thicker than others and I made the flaps thinner to move them out of the way. I made the whole back plate thicker as it was…
This is a remix of https://www.printables.com/model/74330-tft35-e3-v3-case I really liked the original design and it fit perfectly in my current setup but after printing found the cable hole being at one side was not ideal, so I remixed…
External Screen mount for the BTT TFT35 V3 which gives you access to the usb port and SD card on the screen. If this was mounted inside the control box where the original screen was. You would not have access to the usb port or sd card…
MKS-TFT35 Case for 2020 profiles. You may use M3 screws and T nuts for its attachment. SD and USB holes are in the design. Standard button can be used. Kill button is functional with this case I used mine for Anycubic Kossel and it seems…
Model designed to adapt the BTT SPI display in the Sapphire Pro and Plus (which use the MKS TFT 35) It probably fits other printers that use this same display The model can be made with any filament It was designed to allow a simple fit…
Farbfilter Folien Adapter für original Godox Farbfolien für Godox TT350 Aufsteckblitz
