Counting matching models…
Note that this will fit 2024+ Tacomas only! The Tacoma has a lot of space in its center console, but it's deep relative to its width; a tray insert makes it a lot more usable. You could buy a similar part, but why buy when you can print?…
I printed this model as one of the first on my first 3D printer, because I wanted such a flower vase. But later, in some places, I noticed gaps when printing in vase mode with a 0.4 mm nozzle. So I tried to correct the slopes of the…
1:16 Toyota Tacoma This is the second model I scale down to 1:16. This model is a lot harder to print and assemble then the 1:16 80's Dodge RAM , but has a lot more to offer! It is assembled with common M3 hardware, has a working hood…
A couple of followers requested a retro Taco Bell model set and I absolutely loved that idea. I remember spending so many nights in the Taco Bell parking lot, hanging out with friends after band practice, eating tacos and chalupas with…
tl;dr: This is a file for a new wiper level sensor float for a gen 1 Toyota Tacoma. Full step-by-step below. You will need ASA filament and 2 (2x5mm) magnets. How to fix a broken wiper fluid sensor in a Gen 1 Tacoma Step 1: Remove the…
Replacement clip / grommet to hold on the tail light of a 1st gen Tacoma
Need a BIG cup holder for your Thermo/Hydroflask or similar bottle? The factory cup holders just aren't cutting it? Well, here you go. Attaches to the MOLLE panel on the passenger side of the center console. Tested on my 4th generation…
Introducing the Toyota Tacoma Rock Crawler Dog Box with Rack, Fuel Cans, and Yeti Cooler – a must-have accessory for remote control rock crawler enthusiasts. Designed in 1/24th scale, this detailed model can be easily scaled to suit your…
Toyota Tacoma 4th Gen TRD Dodge Wall Art; can be scaled easily and can be hung or stand alone. I also take requests
Created in PETG for additional temperature resistance and overall rigidity, this phone mount is designed to integrate minimally with the stock 2nd Gen Tacoma dash (near the climate control and under the stock stereo. This design is aimed…
WARNING: DESIGNED FOR USE WITH A METAL CANON EF BAYONET ONLY This is my attempt at a Pentacon Six to Canon EF adapter, created because spending 40–70 euro on a simple mechanical spacer feels like daylight robbery. Fully plastic adapters…
Enable ironing on top most surface to get the best results. I flattened the top surface for a smoother top finish and split the object into two pieces (for smaller print beds) that should be easy to glue back together. PETG recommended…
This is a replacement for the vent in a 3rd Gen Toyota Tacoma (2016-2023). There is no cutting necessary to fit. Install video https://www.instagram.com/reel/DC2fgKzRuHT/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Material: PETG…
This design allows you to mount the switch for an aftermarket heated seat kit in the coin tray slot near the cupholders on 1st Gen Tacomas. The specific heated seat kit that I designed this for can be found here - https://ebay.us/m/8KT4K5…
Redesigned my hardhat hook to fit my specific hardhat style perfectly . Cradles the hardhat better so it doesn't deform the plastic in hot weather, and makes it easy to toss the hardhat on + it doesn't rattle or slide around. Prints in 2…
This is a compact and sturdy taco holder designed to keep hard-shell tacos upright while filling and serving them. The model holds up to five tacos at once, keeping them evenly spaced and preventing tipping or cracking. The minimalist…
"He's got a shell as hard as stone and a temper to match!" Prepare for a high-sodium showdown with this high-fidelity replica of the original 1988 Taco Terror . As a key member of the villainous Refrigerator Rejects, this 3D-printable…
1/64 Classic Taco Bell Diorama glue required no support optional logo
I couldn't find a shifter console insert that I quite liked so I made one meself. This one will have to do. I put some vintage Toyota writing on it from the public domain. If I can improve it with some molle holes or lasers or something…
A turbo logo for the Toyota Tacoma 4th gen. Not sure how best to attach it, I will leave that up to you. If you have a good ideer let me know. The letters are 30mm font. The attached file has little attachments to hold the letters…
I made these panels to add 12V power sockets into my truck bed. Includes a fuse panel and is connected to my chassis battery and an auxiliary battery in the truck bed. The switch panel has 12V sockets and a voltmeter, with 2-position…
A perfectly dimensionally accurate blank that fits the Gen 3 hole in the bed, left for optional OEM lights. Snaps in exactly like the OEM blanking plate. Open the blank in Fusion and modify it for whatever you need to do. I've included an…
Hi everyone ^-^ I made a display for my nail polish bottles. It fits 18 bottles with a size up to 28*28mm perfectly (Holo Taco is perfect for this one but I could also put Essie in it). In many of the displays I missed a specific place…
Cupholder adapters for the 3rd generation Toyota Tacoma designed to fit both the front and rear cupholders and hold your 32oz Nalgene bottle. The lower profile on the front cupholder model roughly matches a 24oz yeti, while the lower…
I wanted the threaded gas cap in the great original design from @jimmiedave_927157 and this totally minimal remix simply added the Taco Sauce to their model. This can be printed with two color changes to achieve the look in the included…
Ever enjoy the fine taco dinning experience at a restaurant but wish you could at home too? Well if you are into ceramics this could be for you! Simply print it out and form your clay to it and let dry. Be sure your clay is about 0.4 in…
Condiment organizers sized for common fast food condiments. Sized to fit my Midea mini fridge but might fit others or used standalone anywhere you want! Hope these help someone organize their mess like it did for me.
This clip is a perfect* soloution if you broke the orginal. It is a direct replacement and is very easy to install. Mine was broken when 2 of my "buddies" thought it would be funny to try and steal my tailgate. *I have yet to long term…
You need to use at least a PETG filament to print this if you want it to last longer. Other items needed: -OEM Magsafe wireless charger *USB C -Heavy duty double-sided tape
I designed the hook so it's easier to hang grocery bags in the bed of my truck. They will not slide all over the bed. Can be used to hook anything and be able to stay in place. The hooks will slide with a little resistance but once in,…
I didn't like the fact that the glove box came with a big gap coming from the factory. I tried looking for sources anywhere that made a glove box gap filler but had a hard time. So, I designed my own. Will fit a little bit snugger. You…
Abdeckung für die Unterseite des Prismensuchers für die Pentacon Six. Verschiedene Ausführungen mit Gummiring oder selbstklemmend. Für die Gummiringversion wird ein O-Ring mit den Dimensionen 60x3 benötigt. Sollte der Deckel zu eng oder…
This is a vent ring for the interior of a Toyota Tacoma. Mounted with some double sided sticky tape. 85mm Outside Diameter 2.5mm thick, could play around with this for a more "flush" mount. Made in TinkerCAD
Print the holder, chin, and back part separately. In my case, I use PLA+ with 0.2 nozzle head and 3 inline walls. For padding between the taco and the screen, I recommend to use foam tape. Here I use dark green foam tape with 1.1 mm…
This is a V6 add-on kit for the 1:16 Toyota Tacoma RC and 1:16 Truck/Crawler Flexible Rolling Chassis models. When the chassis moves, the pistons pump up and down automatically. Required Hardware & RC Products 4x M2x6mm screws 4x M2x16mm…
Taco Bell sauce dispenser. While there's plenty out there, I wanted to make this one a bit more personal and design it more after a Taco Bell building. Decided on 3 slots as normally we only use 2 or 3 sauces at most. Features slots in…
Use tree supports on build plate only, back seam position. A small articulated desk buddy inspired by a taco. The model features movable legs connected with print-in-place joints, allowing simple posing and interaction. The arms are…
inspired by 4-Wheel campers, recommend super glue
Plastic worm sprocket gear and plunger/carriage assembly for Tacoma truck bed auto-lock mechanism. This part often strips and starts making a loud clicking noise and eventually stops locking/unlocking the tailgate. I made this based on…
Transform your aquarium or reptile enclosure into a hidden underground world with this Atlantis inspired catacomb hollow cave system. Designed to provide secure hiding, breeding and exploration spaces for shrimp, fish, reptiles or small…
Modeled this directly off of the remains of my gas cap tether that finally snapped after 18 years of use. A cheap stiff yet flexible TPU seemed to work almost perfectly.
Note: a revised overkill version exists now: Original model: Includes a model for the front and rear seats. EDIT: Sep. 8, 2024 - Added a “rear middle seat” hanger with enough droop to reach under the middle seat head rest. Headrest peg…
Broke my 22 year old OEM Nylon rod holder. So, naturally, decided to 3d print one. Was more difficult than I expected simply because I don't have nylon filament. I printed this with PETG, and the only issue is that it was really difficult…
Remix of the Taco Bell Sauce Packet Caddy from Thingiverse to fit on the printbed of a Prusa Mini. I removed the “Salsa” slot so now there are only 4 slots, and also removed the slots on the underside. Original file:…
A remixed 6 slot version of @EmptyL's Holo Taco collection holder to accommodate the After Party collection. Print same as the original: laying on its back with organic tree supports as shown in the 4th photo.
I have a 3rd Gen Toyota Tacoma that also has a glove box organizer by JDMCAR that uses Joshua Dennis' Toyota Tacoma Glove Box Drawers . My dad recently got a 2024 Toyota Tacoma and purchased a JKCOVER Glove Box Organizer . He liked my…
My OEM key fob broke, turned into a good FreeCad lesson (file included). Simple rugged design, prints well as 1 piece, trim the sprue and assemble with 2 M3 wood/plastic screws.
Note that this will fit 2024+ Tacomas only! The Tacoma has a lot of space in its center console, but it's deep relative to its width; a tray insert makes it a lot more usable. You could buy a similar part, but why buy when you can print?…
This 3D model is a replication of the OEM tailgate bushing designed for the 2016 Toyota Tacoma, part number #66143-04020. I printed this in PLA for fitment testing purposes but have not tested other materials.
Any day can be Taco Tuesday with this fun print in place taco truck. Prints on its side without supports. Single color sample printed in PolyLite Silk Champagne Gold. Multi-color sample printed in: Hatchbox Green, PolyMaker Polylite Silk…
I created this to help with the Tacoing of the SV08 bed. Some of the Sovol SV08 beds center along the Y axis is lower than the left and right side on the Y axis. This causes the Taco effect. I made 320mm x 25mm x 1mm strips that when…
Overview: This is a center cap designed to replace the basic Toyota “T” logo with a sleeker Toyota T-Force logo. It is designed to fit a 3rd generation Toyota Tacoma SR5 with the SX package black wheels, so consider test printing one…
TACO PRAYER - AS FOR ME AND MY HOUSE WE WILL SERVE TACOS, SALSA 24:7 Category: Signs & Logos
I designed this specifically to hold Holo Taco nail polish bottles. It will hold 8 on each row for a total of 48. It features framing along the base for stability. Printed in PLA. No supports needed.
I have an 1974 Bultaco and want to recreate the tank badge. The original is clear plastic with the image engraved from the back and painted.
Was tired of the Mentos gum pack rattling around in my truck. This significantly reduces the amount it can travel in the rectangular storage slot. Try adding a few inches of electrical tape to the outside before inserting for a more…
Fish tacos in a takeout container. Available with a side of rice & beans or fries. Created with Blender. If you print it at approximately 70mm x 72.6mm x 22.5mm, you can use a piece of 1.75 mm filament as the hinge between the top and…
2005-2015 Tacoma fitment, personally used in a 2013 Tacoma. fits well without blocking the HVAC knobs excessively. edited 11/25/24 better visibility of the HVAC controls edited 8/5/25 added support and suggest PETG or similar as pla will…
This panel mounts under your for connectors or whatever (I used 3 x XT60 DC connectors and 2 x BNC Coax connectors for portable HAM radio). Fits my Gen 3 Tacoma Sport passenger seat with no power controls. You can try on other seat…
Recently I was meeting with a number of colleagues in person and decided it might be fun to make some taco coins to give out as a way of saying thanks. Similar to the heytaco.com service. The image was based on an .SVG ( here ) with a CC0…
Taco Bell Logo Chromaphane made using Lithophane Maker's Lithophane Maker Desktop software (LMD). A chromaphane is a type of filament painting (yes, it is similar to HueForge), but the way a chromaphane is generated is different from how…
I was asked to create a bayonet with lockring similar to my Mamiya Press version for Pentacon 6 lenses. So here it is! I've provided STEP file for use in your own projects. See the main image for assembly order. The center ring screws…
Printed in 4 colors with standard 0.2mm layer height setting with 0.4mm nozzle. Arachne generator, and 2 walls, 4 top layers, 3 bottom layers, and 10% gyroid infill. Use more colors for even more fun if you have a second AMS. Hole for…
With 0.20mm layers, I set top and bottom shells to 2 layers. With this I was able to get a single layer of 20% gyroid infill. I don't know how consistent the Maisto quality control is. I designed this for a snug fit and the front edge is…
Stores individual condiment packs you frequently get from fast food chains.
I printed TPU with a 0.6mm nozzle at 0.30 layer height. 10% infill, no supports.
My clock was no longer functioning so I modeled a cubby to replace a broken clock on a 1st Gen Toyota Tacoma. Enjoy! p.s. I recommend printing on its “back”, which results in a faster, cleaner print, with much less support material. Print…
Heads up: the knobs look the same size, but the drive knob is smaller by a hair! Choose your filament and layer height to match your desired end quality. The bottom of each trim ring has tiny retention tabs. When installed the trim rings…
Matches the shape of the OEM phone cubby. To install: Print as you like. Put the 15W magsafe charger in position. The 25W will not currently fit this model. Press the cord into place on the back, minding the bends. If taping, place 1-3…
These models can be used to replace the switch covers located below the radio unit. There are a few variations: Blank Press fit USB (may require super glue) Microphone (using standard aftermarket radio microphones)
I printed this model as one of the first on my first 3D printer, because I wanted such a flower vase. But later, in some places, I noticed gaps when printing in vase mode with a 0.4 mm nozzle. So I tried to correct the slopes of the…
I know that the oem cup holder has a slight arc to it. Rather than try to match that contour and print facing up, I opted for a more simple print. And the side gaps make it easier to remove by just pressing down on one end or the other.…
Prints fine without suppports, but there may be a little stringing. Hidden when installed. Prints great with supports. I find TPU supports work well with support/object xy distance and first layer gap set to 1mm. This seems to keep the…
I printed them in TPU without supports. The fit is very tight by design. I pressed each plug partially into place and then whacked it with a mallet to seat it fully. 3 sizes. I'm leaving the two lower holes open for now for drainage and…
My procedure to fix the taco bed on the Sovol SV08... Step 1 Heatsoak your bed to your normal print temp, preform a QGL 2 or 3 times (this will reduce the deviation between the 4 corners), do full bed mesh height map, and save a copy of…
Update 2024.12.03 : Added a split folder, for people who don't have a large enough print plate. Thanks @Libery300_877863 for the suggestion This insert is designed to organize and allow for quick setup and storage of the various…
La petite pièce qui fait contact quand le robot est verouillé a cassé. Découper la partie concernée avec un disque monté sur une mini perceuse. Coller la pièce de remplacement. Pour pouvoir passer le bol du robot au lave vaisselle il est…
I have had it in my car for over a year. Started with PLA but that didnt work out so well in the summer. I now have it in ABS. Anyone who prints it may want to modify it a bit because after about a year it has shown a bit of scratching on…
Print 2 each of the Player Decks and Player Tray files. Player Trays are stacked 3 on top of 3 with the cutouts on each row designed to hold 3 of the character boards. The “backfill” pieces serve to fill the remaining space and have a…
EDIT: Added a 3x5 tray with space for 15 polish bottles. Compact 2x3 storage for 6 HoloTaco nail polishes. The bottom of each slot has a hole for easy identification of the color name. The bottles have a snug fit, preventing them from…
got bored and slapped this up crudely because i suck at fusion360. took a couple peoples designs and i am sorry as i dont remember where i got the boot clip from. i will include the original anyhow. ill also be including the 3mf file so…
Card Game Keeper for Taco Cat Goat Cheese Pizza adjusted for the card size.
I didn't want to buy a $25 glove box shelf, so I printed @melmel's divider and modified @Ashyr_166850's drawer files to fit. For the 2024 Toyota Tacoma. If you want a more snug fit, increase only the height to a max of 65mm. The shelf is…
This is a floor mat clip for a 2008 Toyota Tacoma. The print (in photo) failed on the base plate, but enough was made to call it good. I used ASA as PLA would not hold up.
Mount your front wheel next to your bike in the bed of your Tacoma! This is a great addition to a fork mount bike rack to securely store the front wheel with your bike. PLEASE READ DESCRIPTION BEFORE PRINTING I completely redesigned this…
Under the desk USB hub holder Deltaco UH-475. Freecad file included. Prints without supports
Made to fit the drain plug off a RetraxPro XR retractable tonneau cover. With an 8mm opening for the hose and 7.3mm bed fitting. Printed as oriented in PETG 0.20mm layers with supports. Really didn't mess with settings at all as it's a…
This is a Remix of a Mag Safe Charger for a 2024 Tacoma. 3D Print Face down with no supports needed. PETG or ABS/ASA recommended to prevent melting in the Truck. The Mag Safe charger wire can be hidden in the print. Use alien tape in the…
This is a ground-up remake of the mag tensioner part from @blackbunny_399453's Taco Mag Pouch to fit Hellcat Magazines. This print utilizes the original carrier shell and works with standard 4mm paracord. The current retention of this…
Summary says it all! I've had it for years and now I can't imagine life without it. Easy print without support.
i make in PLA, meybe the best material is PETG, 15% infill and 4 walls with 0.4 nozzle
