Counting matching models…
Hi, I have designed the Fifteen52 Tarmac alloy wheel from scratch in fusion 360 to better suit an rc car, the material (PLA+), the printing process (FDM) and still retain the famous design. The wheel is designed to be printed face down…
I made this pallet rack for my RC 1/14 Lesu Forklift. It’s built more for function then scale looks. It has (5) rack positions. The rack is held together with M3 X 12 or 14 pan head screws. This rack will hold a bit of weight and is very…
These are Tamiya Paint Holders for use on IKEA Skadis pegboard. Skadis_Tamiya_2 and Skadis_Tamiya_4 are for the Mini 10ml bottles. Just added 23ml version, this is too big, cup inner diameter is 45mm.... v2 added, which should be inner…
A convenient way to display your 23ml Tamiya paints. No Supports needed.
I made a steel wheel with a deep dish for my tt02. I made these wheel 52mm high, 26mm deep with and of set of ET02 (2mm positive) to suit my Tamiya TT02 and use original tires. The wheel is designed to be printed face up with supports at…
A remix of a mounting arm I found in the Voron Discord. Unfortunately I don't know who created this. I made this one from scratch and also added the step. You need 2xM3x12, 2x extrusion nuts and 2 heat inserts. You can find some example…
Unfinished project, I don't recommend printing, just for those that are curious :)
Rear and front body post in different lengths for Tamiya TT02. When I completly finish scad file, I will put it here. So you can then create your own variation. 4.7.2025 : added custom lenght (hcl22.5) variant as requested (This 3D model…
IMPORTANT, the base plate is over the Gridfinity dimensions and will over hang on one side. These holders are intended to be on the edge of the grid. I wanted a Tamiya bottle holder for my model desk that fit the Gridfinity system. I…
Holder for Tamiya cement etc square bottles. Print instructions Category: Art Summary Holder for Tamiya cement etc square bottles. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.35 Infill: 10%
A Holding station For CA glue, specifically the Bob Smith Industries type 1. oz and Tamiya glue, square bottles. Also holds the Bob Smith industries accelerator bottle. Print instructions Was printed in PLA with excellent results.
Versteifungsplatte für Tamiya TT02 Top Deck for Tamiya TT02
1/10電動4WDラジコンカー タミヤのTT-02をベースにしたMサイズシャーシ(ホイールベース210mm)です。 組立には主に下記のパーツが必要です。 ・TAMIYA TT-02 Cパーツ ギヤボックスジョイント ホイールアクスル ドライブシャフトジョイント Gパーツ デフギア スパーギア(70T) ベアリング その他 ・ハイトルクサーボセイバー ・ダンパーセット(CVAダンパースーパーミニ等) ・M3x16mmシャフト(ドッグボーン用)…
If you know, you know, if not print this before it's too late! A lot of us have done it, accidently knocked over a bottle of Tamiya glue ruining a cutting mat, decals or parts of the model you are carefully trying to build. These holders…
After getting a Tamiya Clod Buster for my birthday, I wanted to make something more unique as it looked a bit toyish, so started coming up with ideas of things I could design and print. I've learned loads while designing these, and really…
Inspired by this remix, I made some mudguards from scratch making sure there is absolutely no rubbing. My tt02 has various suspension modifications to improve suspension travel, I needed more clearance than normal. (It should work with…
This bolts on over the front end of the steering rack on the TT02 and takes out some of the side to side slop. The stock screws you remove to fit this are too short, you'll need ones somewhere around 15-16mm. When I finished my TT02 build…
This 2x2 gridfinity block dispenses Tamyia masking tape in 3 different widths: 6mm, 10mm, and 18mm.
Rear Diff Locker to suit Tamiya TT02 if you want to use to drifting. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 90 Filament: Generic PLA Post-Printing Instructions…
Imported from my designs on Thingiverse. Original upload was 13.06.2020 (dd.mm.yyyy) I reuploaded this here to make the bracket files in one continous upload strike I do most mechanical design. This was requested by…
Working on some potion bottles. These should print just fine, they might change some in the future Category: Other
Info fits 6 tamiya panel line accent color (40ml) or tamiya 40ml square bottle fit 1 tamiya weathering master Print instructions Filament material: Any type should be ok Layer Height: 0.2-0.3 Infill: 10% or more Supports: yes Credit goes…
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
A paint rack for Tamiya paint pots in 36mm diameter (10ml bottles) DXF files for laser cutting. ; Assembled size (H;W;D) - 328mm; 423mm; 80mm. Print Settings Rafts: No Supports: No Category: Tool Holders & Boxes
Welcome, all RC enthusiasts! One of the reasons the TT-01 is a great beginner chassis is the absolute lack of suspension adjustability - you can't mess up the setup this way. However, the chassis is rather nervous and tend to oversteer,…
Printed pictures are of Medium 6 compartment box. Large 6 compartment Box: 200 x 100 x 25mm Print: 204 x 220 x 25mm Large 8 compartment Box: 200 x 100 x 25mm Print: 204 x 220 x 25mm Medium 8 compartment Box: 150 x 75 x 25mm Print: 154 x…
Verschiedene Spurwinkel Pfeile innen geben die Fahrtrichtung an. High- und Low-Kompatibel (die Teile können wie von Tamiya vorgesehen für eine hohe und eine tiefe Fahrhöhe verbaut werden). Es ist zu beachten das die Winkel immer vom…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
There are two kinds of scale modellers, those who have accidentally pushed over their Tamiya glue bottles, and those who will do so in the future. If you're reading this, it means you're a member of the first kind :) Welcome in the club…
This Skadis rack can hold 2x a 250ml Tamiya X-20a, airbrush cleaner or lacquer thinner container. Inner dimensions are 55mm x 72.5 mm The design was inspired by the Skadis Tamiya Cement etc holder of SoBaldrick…
Having tried to carry my paint pots around the house in various boxes, I thought surely there's a better way. I had a look around but none of the models available seemed to be stable enough for my liking. This version will carry 15 10ml…
A holder for square bottles of Tamiya Plastic Cement. Fits the Skadis / Skådis system of pegboards. Print it with three perimeter walls and at least 15% infill to make sure that the pegs are structurally sound. Enable support to make them…
Hello everyone, I redesigned the lower rear suspension arm for the Tamiya TT02. For a other projekt I needed them to be slightly longer so I made the model in SW configurable. The models I've added are the originel length and +1,5mm. If…
Tamiya modular paint system 23ml for IKEA SKÅDIS board. It contains one central module, it can be assembled in any length and finished with a left and right module. Update 27.6.2024 Added version for 10ml Tamiya mini paints
Having tried to carry my paint pots around the house in various boxes, I thought surely there's a better way. I had a look around but none of the models available seemed to be stable enough for my liking. This version will carry 11 23ml…
Allows using BambuLabs Wiper with Voron Decontaminator buckets. Features: wall guard for easy bucket mounting even with imprecise hand movements mount holes in positions where Voron Decontaminator bucket mod expects them (for magnets…
This gearbox brace replaces the original skidplate. I made it in an attempt to solve the well known Tamiya ORV differential issue. The gearbox brace puts pressure on both sides of the of the differential. This should reduce the chance of…
UPDATE: Added another brace that prints and works well with the flex in PLA, clips in very nicely. Looks about the same from the outside but the original didnt print well for me so i thickened the insides of the slats, added locator pins…
Tamiya C11 Rear Wing and Diffuser. It is modeled to be a closer representation of the real car with actual down force of 95 grams at 30mph. The top smaller airfoil needs to printed with supports on the underside and printed slow because…
Brenden D'Paula made an excellent mod to use the Bambu A1 silicone brush. I was looking to make one from scratch but decided to remix his instead as it was designed very elegantly. I remodeled it slightly so that it will work with the…
My son broke my TT02B's rear wing, so i made a new one ! ^^ Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Category: R/C Vehicles
A little holder I designed for Tamiya thinner or airbrush cleaner bottles. Can be easily printed without supports. Grips in to the indent on the sides of the bottle. Simple, but very convenient :)
Holds an 18mm, 10mm, and 6mm dispenser of Tamiya tape with a side area for spare rolls. No mag holes
This is a little GoPro mount I designed to mount onto the body posts of an RC car. Included are two versions: Tamiya - designed to be mounted on a TT01 or TT02 chassis, it might fit others. The holes are 5.5mm diameter and spaced at 65mm.…
(UPDATE 7-24-2024) Added a file for 34mm Aero Color paints from Schmincke as requested. -34mm Square Dual (Schmincke Paints) Citadel Paint and Tamiya Cement holders for Yozer's HSW Modular Paint Rack. Modified the original dimensions for…
Stackable paint racks for Tamiya 10ml jars. The racks stack by sitting on the lids of the ones below. Solid sidewall allows labels to be affixed. Make sure to print with the rack in a vertical orientation. 23ml version available here -…
This is a camper that fits in the rear bed of the Tamiya RC Toyota Hilux High Lift. This fits over the top of the stock light rack. I left out the windows as I thought it'd be better to cut out clear plastic so you could see into the…
Das gezeigte Modell im Bild ist mit einer 200mm breiten HPI-Karosserie und mit Offset -3 bestückt. The model shown in the picture is equipped with a 200mm wide HPI body and offset -3. Die Felgen sind in "meinem" Standard-Offset…
Passt für das Tamiya DT-03 Chassis, besonders für den Neo Fighter Buggy und Racing Fighter Buggy. Die Befestigung des Heckflügels erfolgt mit den im Karosserie-Kit enthaltenen Teilen. Der Heckflügel wurde von mir aus TPU Shore 98A mit 25%…
Based on the Vallejo Paint Rack from Stu Cameron a paint rack for Tamiya 23ml X and XF paint bottles.
Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.
A station that holds a complete set of Tamiya weathering Masters, four bottles of Tamiya panel accent and some brushes
I made this Bumper in order to replace my original Tamiya Foam Bumper. I race it with VW beetle body from racersparadise.de Other Bodies might fit as well for sure. You can choose what ever infill you like, and don't forget to leave away…
You can use this seal on clay and ceramics.
A wheel for the Tamiya M-03 models in the style of the OZ Rally wheel. It's the blue one, I lost the source for the red wheel somehow, sorry. Requires MCAD:…
Remixed Xlnt3D's nicely designed rear TT-02B shock tower ( https://www.thingiverse.com/thing:4494409 ) so I could use my stock screws. This is a great replacement to add rigidity to the rear shock tower so your shocks can do their job.…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
Hier hab ich ein Paar Scheibenwischer für den Ford F350 von Tamiya. Der linke ist etwas stärker abgewinkelt, der rechte etwas flacher. Here I have a pair of windshield wipers for the Ford F350 from Tamiya. The one on the left is a little…
Organizer holds: 4x Tamiya Weathering Masters 2x Bottles of Tamiya Panel Liner 1x Tamiya Paint Thinner 4x Brushes Cotton Swabs Print instructions: Printed with PolyTerra PLA mint color, 0.25mm, 5% infill, no brim, no supports Inspired by…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
Intamin rollercoaster track made in fusion 360
I designed this Tamiya paint tray in Fusion 360 to hold Tamiya Colour paints, it will hold any height bottles, but at present I have designed the clip to hold two trays together to fit the 10ml bottles If I get any larger bottles or have…
The holder for my body on my TT02 chassis wobbled a bit when driving. To fix this problem, I designed a stiffener. The brackets wobble less and the body sits better on the chassis. The distance between the two holes is 67mm. The diameter…
Diese Freilaufbühne ermöglicht es, Modellfahrzeuge im Stand einem “Probelauf” zu unterziegen und Einstellarbeiten am Antrieb (Antriebswellen, Schaltung, Getriebeansteuerung) durchzuführen. Die führenden Zahnstangen verfügen über ein 2 mm…
Clip-on exhaust for Tamiya TT 02 model cars. best in TPU printing for longevity.
After many tests and development this is the result. High Grip rear uprights with lower rollcenter and 2.5 degree toe in. I recomed to print this of pla strong from esun or PCTG. I drive this upright in a 17.5T powered Car indoor on…
Model of a Mesopotamian Lamassu, based on a 3-D scan from the British Museum. As the 3-D scan was of a relief built into a wall, this model was created by mirroring the visible half to create the full model, so both halves are mirror…
Did a renovation for an old Clodbuster and used a Blackfoot shell for this. As there is no proper interior available I designed a very simple interior to cover the cables and wiring and give it some more realistic touch. Some parts need…
Was looking for a stepped type organizer for my small collection of Tamiya X and XF (23ml/40mm dia) line of acrylic model paints and couldn't find exactly what I was looking for to print on my Prusa Mini+, so I made one! Stepped design…
Spare front suspension mount for the Tamiya DT-03 when no genuine spare part is available. It's pretty similar to the genuine part and - depending on your filament choice - should work just as well or even better. Print Settings Printer…
52/19 tooth spur/drive gear for use with the Tamiya DT-02 and DT-03 gearbox. Design - I used the front suspension and rear suspension/gearbox unit to build a stock RC drag car, but wanted a higher top speed than the original gearing. The…
I did this mod specifically for the Micron/Micron+ printers, but it probably can fit any 1515 extrusion printer. Multiple bucket sizes are included. Print using standard Voron settings. M3x6mm screws for mounting. Follow the directions…
Permet de retenir les plus gros débris de mousse ou feuilles et limite l'encrassement de votre cuve 1000L récupératrice d'eau de pluie . le modèle en 220mm dispose d'un trou de 56 mm pour passer un tuyau de pompe d'arrosage, le modèle en…
I use heavily in my workshop Modular workshop system from Hobbyzone ( http://www.hobbyzone.pl/en/wsm/Hobby+Zone+modular+workshop+pt3this/ ). I love their product. Smart, practical, easy to build. Holder I am presenting here is inspired by…
Tamiya Mercedes C11 Mirrors. 2 Piece with no supports needed. Print vertically and I used a 0.2mm nozzle with 0.1mm layer height for best finish with zero infill. See picture for how to assemble them with superglue and I also used…
Trident right angle bracket + mount for use with Bambu rubber scrubber strips and nozzle wiper. You can get them from Bambu's site and are easily replaceable if they get broken. I included spacers at 0.25, 0.5, and 1mm so that you can…
Just a remix to fit on a Vitamin Water/Gatorade bottle. Print Settings Rafts: Doesn't Matter Supports: No Category: Household
A few of these small black or brown bakelite containers was something every German soldier would be issued and required to carry in a uniform breast pocket. Each box contained 10 tablets of Losantin - calcium hypochlorite - which when…
I wanted to make more realistic version for Tamiya Hi Lift axles. All the Hi Lift hardware/internals fit. Diffcover needs m1.6 bolts Files contains tandem axle with drive trough. With these and HiLift internals it is possible to make…
Description Gridfinity container for Tamiya Side Cutter (Slim Jaw) https://www.tamiya.de/tamiya_en/categories/model-kit-accessories/model-making-tools/sp-side-cutter-slim-jaw-300074123-en.html Gridfinity size: Width: 2 Length: 3 Height: 3…
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert mich einfach. Ich werde dann weitere Variationen hinzufügen. Beachtet meine Offset-Tabelle.…
This is an alternative body and wing for the 1/10 RC model kit TAMIYA Hotshot (1 & 2). Printing I recommend using PETG as the material for printing. PLA is quite rigid and may be too brittle for the rough RC environment. The printing…
I designed the Tamiya 10ml paint holders to be tilted, which saves space on the board. They can be connected to each other to any length. I used two universal hooks from CSD_Salzburg (I attached them to the files). In order to print…
I remixed the “OpenRC F1 2023 Car - Full Part Set”, I remade the tires to be the same size as the Tamiya F104 tires Print files Front_Tire_V1 Rear_Tire_V1 Print settings Printed on my prusa mk4 Printed with Input Shaper (structural)…
A Gridfinity bin made specifically to hold 23ml Tamiya paint bottles. Would also work well to hold other things that are around 40mm in width, such as thread spools, bottles, and/or other brand paints. Includes holes in the corners for…
Jonas original model is genius, But on the acrylic thinner bottle it was a bit tight and the clips did not seat properly, because on the side, the bottle has a raised design. I made this model from scratch using his idea. I shortened the…
Glue holder for four bottles. Printable on mk3s/mk4 print beds.
Fender Flares for scale Tamiya Ford F350 1/10 RC. STL files for only left side, mirror these for right side. Print Settings Printer: Iron-M1 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Filament: gembird TPE black Category: R/C…
This is a remix of another remix. I found with the original model that it does not fit around LDO's version of the Trident endstop switch due to it being physically larger. Also, LDO's bed mount is a few mm taller than a “base” Trident so…
Wall holders for various model paints. You can use it for Tamiya 10ml bottles, Vallejo Air colors, AK Interactive, Mig, etc... There is also specially designed holder for Microscale bottles. Enjoy!
I wanted to add a bit of scale realism to my build especially since Tamiya typically only includes stickers for the exhausts. This is a simple print that attaches directly to the rear bumper plate
Version 2nd version Postscript Resize the model for more quality!
The 10ml bottle holder will fit within the Gridfinity grid. One has a 3mm base that fits with some of the other things I have made. The other has a thin base to save on material when printing
for this desktop stand you need 4 M3x8 countersink screw. The feet can you print so that you need no support material. You have to print one baseplate and 4 feet. i prefer to print the baseplate of TPU and the feet out of PLA.
Having tried to carry my paint pots around the house in various boxes, I thought surely there's a better way. I had a look around but none of the models available seemed to be stable enough for my liking. This version will carry 12 23ml…
Recommend to print with .12 layer height and a .4 nozzle or smaller, I did 6 layers top and bottom and 6 walls, with 35% cubic infill. PLA works, but nylon would be ideal. Be sure to run slow at the start and use some oil or grease. The…
NOTE: This model is a prototype. I tried to catch as many issues as possible, the model works for me, but there might be other issues. Any feedback will be appreciated and found issues will be fixed in next version. New, improved version…
Set zum Umbau des Tamiya 2-Achsers auf eine Luftfederung. Feder muss gekürz werden. Luftfederbälge werden benötigt
EDIT: Please make sure that this is the wrench that fits you blender models. Other users posted variations that fit newer Vitamix blenders. This thing is a tool I used to replace blades on our Vitamix blender. It's a remix of another…
![Tamiya TT01 wheel hexes [different widths]](https://media.printables.com/media/prints/425363/images/3518554_bf45835a-4fb6-46ab-9f83-35d3528e8070/20220117_114136.jpg)
![Tamiya TT01 Rear Uprights [Toe, Camber adjustable]](https://media.printables.com/media/prints/119961/images/3518193_31bc09b1-6ae1-4a2d-9feb-f5442f1e1619/20220117_115536.jpg)
